Preparation and characterization of silver nanoparticles in natural polymers using laser ablation

In this paper we have done a comparative study on efficiency of natural polymers for stabilizing silver nanoparticles (Ag-NPs) prepared by laser ablation technique. The selected polymers are starch (St), gelatin (Gt) and chitosan (Ct). The fabrication process was carried out through ablation of a pure Ag plate by nanosecond Q-switched Nd?CYg pulsed laser (?? = 532?nm, 360?mJ/pulse). The stability of the samples was studied by measuring UV-visible absorption spectra of the samples one month after preparation. The result showed that the formation efficiency of NPs in St were highest and also the prepared NPs in St solution were more stable than other polymers during one month storage.     

壳聚糖修饰银纳米颗粒的制备及抗菌性能研究

采用液相化学还原法,以壳聚糖为修饰剂,硼氢化钠为还原剂,制备了壳聚糖修饰银纳米颗粒(chitosan-Ag NPs)。通过X射线粉末衍射仪、透射电子显微镜、傅立叶变换红外光谱仪等对所制备样品的结构和形貌进行了表征。结果表明,所制备纳米颗粒具有面心立方Ag的晶型结构,壳聚糖通过氨基和羟基中的N、O原子与Ag+的化学键合作用修饰在纳米颗粒表面,起到了限制颗粒粒径长大和防止其团聚的作用。采用肉汤连续稀释法检测了样品对大肠杆菌和金黄色葡萄球菌的抑菌杀菌性能,结果表明chitosan-Ag NPs具有优异的抗菌性,抗菌性能受到粒径大小的影响。     

Preparation and antibacterial properties of hybrid-zirconia films with silver nanoparticles

The antimicrobial effect of incorporating silver nanoparticles (AgNps) into zirconia matrix–polyether glycol was studied. AgNps of 4–6 nm in size were synthesized using the inverse micelles method, and different doses of metallic nanoparticles were incorporated into zirconia–polyether glycol mixtures during the ageing procedure. Atomic force microscopy (AFM) of the modified hybrid film showed a homogenous distribution of 20–80 nm diameter AgNps, indicating agglomeration of these structures during film modification; such agglomerations were greater when increasing the dosage of the colloidal system. The AgNps-hybrid films showed higher antimicrobial activity against Gram-positive bacteria than for Gram-negative bacteria. Hybrid films prepared with dioctyl sodium sulfosuccinate (AOT) stabilized AgNps presented enhanced antibacterial activity compared to that obtained through the addition of a high AgNO₃ concentration (0.3 wt%).     

Negligible particle-specific antibacterial activity of silver nanoparticles

For nearly a decade, researchers have debated the mechanisms by which AgNPs exert toxicity to bacteria and other organisms. The most elusive question has been whether the AgNPs exert direct "particle-specific" effects beyond the known antimicrobial activity of released silver ions (Ag(+)). Here, we infer that Ag(+) is the definitive molecular toxicant. We rule out direct particle-specific biological effects by showing the lack of toxicity of AgNPs when synthesized and tested under strictly anaerobic conditions that preclude Ag(0) oxidation and Ag(+) release. Furthermore, we demonstrate that the toxicity of various AgNPs (PEG- or PVP- coated, of three different sizes each) accurately follows the dose-response pattern of E. coli exposed to Ag(+) (added as AgNO(3)). Surprisingly, E. coli survival was stimulated by relatively low (sublethal) concentration of all tested AgNPs and AgNO(3) (at 3-8 μg/L Ag(+), or 12-31% of the minimum lethal concentration (MLC)), suggesting a hormetic response that would be counterproductive to antimicrobial applications. Overall, this work suggests that AgNP morphological properties known to affect antimicrobial activity are indirect effectors that primarily influence Ag(+) release. Accordingly, antibacterial activity could be controlled (and environmental impacts could be mitigated) by modulating Ag(+) release, possibly through manipulation of oxygen availability, particle size, shape, and/or type of coating.     

Synthesis and antibacterial properties of silver nanoparticles

Nanometer sized silver particles were synthesized by inert gas condensation and co-condensation techniques. Both techniques are based on the evaporation of a metal into an inert atmosphere with the subsequent cooling for the nucleation and growth of the nanoparticles. The antibacterial efficiency of the nanoparticles was investigated by introducing the particles into a media containing Escherichia coli. The antibacterial investigations were performed in solution and on petri dishes. The silver nanoparticles were found to exhibit antibacterial effects at low concentrations. The antibacterial properties were related to the total surface area of the nanoparticles. Smaller particles with a larger surface to volume ratio provided a more efficient means for antibacterial activity. The nanoparticles were found to be completely cytotoxic to E. coli for surface concentrations as low as 8 microg of Ag/cm2.     

纳米颗粒的短脉冲激光烧蚀制备及其非线性光学应用

本文主要介绍了纳米颗粒的短脉冲激光制备及其在非线性光学领域的应用。短脉冲激光制备纳米颗粒具有纯度高、操作简单和适用性广等优点,所制备的非线性纳米颗粒尺寸分布均匀,粒度小且可调控,在非线性光学材料中有着独特的地位。为了更深入地对此进行研究,本文介绍了纳米颗粒的光学非线性和激光的特点和原理。在此基础上,通过阐述短脉冲激光与物质相互作用的机理,说明了激光制备纳米颗粒所具有的优点,详细分析了制备条件对合成纳米颗粒的影响,并结合激光制备不同的纳米颗粒,介绍当前激光制备各类纳米颗粒的研究现状。激光制备纳米颗粒是一种操作简便、适用性广,且对环境友好的方法。

     

Bio-mechanochemical synthesis of silver nanoparticles with antibacterial activity

By using a bio-mechanochemical approach combining mechanochemistry (ball milling) and green synthesis for the first time, silver nanoparticles (Ag NPs) with antibacterial activity were successfully synthesized. Concretely, eggshell membrane (ESM) or Origanum vulgare L. plant (ORE) and silver nitrate were used as environmentally friendly reducing agent and Ag precursor, respectively. The whole synthesis took 30?min in the former and 45?min in the latter case. The photon cross-correlation measurements have shown finer character of the product in the case of milling with Origanum. UV–Vis measurements have shown the formation of spherical NPs in both samples. TEM study has revealed that both samples are composites of nanosized silver nanoparticles homogenously dispersed within the organic matrices. It has shown that the size and size distribution of the silver nanoparticles is smaller and more uniform in the case of eggshell membrane matrix implying lower silver mobility within this matrix. The antibacterial activity was higher for the silver nanoparticles synthesized with co-milling with Origanum plant than in the case of milling with eggshell membrane.     

Preparation and characterization of cuprous iodide nanoparticles

A new technique for the preparation of CuI nanoparticles from CuSO₄ and KI ethanol solutions has been developed. Preparation conditions were optimized through a series of experiments. Under these conditions, the yield of CuI reached 95.39%. The product was characterized and the reaction kinetics was studied. The results show that the product takes a roughly spherical shape with an average particle size of less then 50 nm. The activation energy of the formation of CuI is found to be E _a = 0.58 × 10² kJ/mol, and the preexponential factor in the Arrhenius equation is k ₀ = 7.43 × 10¹⁶ mol/(l s). The text was submitted by the authors in English.     

Green synthesis of silver oxide nanoparticles using Panicum miliaceum grains extract for biological applications

In this report, the silver oxide nanoparticles were green synthesized using Panicum miliaceum grains extract and were proposed for the first time. GC–MS analysis explicated 2-Acetylbenzoic acid was the active phytocompound with 97.07% of presence in aqueous grains extract. The synthesized silver oxide nanoparticles were analyzed by several analytical techniques such as UV–visible, XRD, FT-IR, HR-TEM, TG, XPS, EDX and mapping analyses. The results of various analytical techniques confirmed the silver oxide nanoparticles formation. The formed nanoparticles were in 10–25 nm size. The effectual bioactive properties of nanoparticles were revealed through antioxidant, anti-diabetic, anti-inflammatory, larvicidal and insecticidal activities. The high mortality of larvae and insect was observed at 48 h in 100 ppm and 72 h in 100 μg/Kg concentration, respectively. The antibacterial activity explained the bactericidal property of nanoparticles on S. aureus and S. typhi at 150 μg/mL concentration. The effective drug activity of nanoparticles was observed from 98.10 % of toxicity against A549 lung cancer cells at 100 μg/mL concentration. The growth of Vigna unguiculata was efficiently increased by lower concentration (60 ppm) of nanoparticles. According to results, the green synthesized nanoparticles can be applied in pharmaceutical and agricultural sectors as biocompatible, non-toxic and cost-effective material.     

Preparation of colloidal cadmium selenide nanoparticles by pulsed laser ablation in methanol and toluene

Colloidal spherical nanoparticles (NPs) of cadmium selenide (CdSe) have been prepared by laser ablation of cadmium target in methanol and toluene solutions. The properties of CdSe nanoparticles ablated in methanol and toluene were investigated and compared. The morphology and structure of synthesised CdSe NPs were analyzed by X-ray diffraction (XRD), scanning electron microscopy and transmission electron microscope (TEM). XRD investigation revealed that the nanoparticles are crystalline and have hexagonal structure. Optical absorption showed that the value of optical energy gap of ablated CdSe nanoparticles depends on the solution type. TEM measurements showed that CdSe NPs with diameters ranging from 25 to 35 nm were synthesised in methanol while, the nanoparticles ablated in toluene have diameters in the range of (40–50) nm.     

Extracellular biosynthesis,characterisation and in-vitro antibacterial potential of silver nanoparticles using Agaricus bisporus

Microbial silver nanoparticles have been known to have bactericidal effects but the antimicrobial mechanism has not been clearly revealed. The use of microorganisms in the synthesis of nanoparticles emerges as an ecofriendly and exciting approach. Here we report on the extracellular synthesis method for the preparation of silver nanoparticles in water using the extract of Agaricus bisporus, a naturally occurring edible mushroom, as reducing and protecting agents. The silver nanoparticles were characterised by ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR) and X-Ray diffraction (XRD) analysis. The synthesised silver nanoparticles showed antibacterial activity against the multi-drug resistant Gram positive and Gram negative bacterial pathogens.     

Biofabrication of broad range antibacterial and antibiofilm silver nanoparticles

Silver nanoparticles (AgNPs) were biosynthesized via a green route using ten different plants extracts (GNP1‐ Caryota urens, GNP2‐Pongamia glabra, GNP3‐ Hamelia patens, GNP4‐Thevetia peruviana, GNP5‐Calendula officinalis, GNP6‐Tectona grandis, GNP7‐Ficus petiolaris, GNP8‐ Ficus busking, GNP9‐ Juniper communis, GNP10‐Bauhinia purpurea). AgNPs were tested against drug resistant microbes and their biofilms. These nanoparticles (NPs) were characterised using UV‐vis spectroscopy, transmission electron microscope, Fourier transform infrared spectroscopy, X‐ray diffraction and Image J software. Most of the AgNPs were distributed over a range of 1 of 60 nm size. The results indicated that AgNPs were antibacterial in nature without differentiating between resistant or susceptible strains. Moreover, the effect was more prominent on Gram negative bacteria then Gram positive bacteria and fungus. AgNPs inhibited various classes of microbes with different concentration. It was also evident from the results that the origin or nature of extract did not affect the activity of the NPs. Protein and carbohydrate leakage assays confirmed that the cells lysis is one of the main mechanisms for the killing of microbes by green AgNPs. This study suggests that the action of AgNPs on microbial cells resulted into cell lysis and DNA damage. Excellent microbial biofilm inhibition was also seen by these green AgNPs. AgNPs have proved their candidature as a potential antibacterial and antibiofilm agent against MDR microbes.Inspec keywords: silver, nanoparticles, antibacterial activity, nanofabrication, microorganisms, ultraviolet spectra, visible spectra, transmission electron microscopy, Fourier transform infrared spectra, X‐ray diffraction, proteins, DNA, nanomedicine, biomedical materials, cellular biophysicsOther keywords: biofabrication, broad range antibacterial nanoparticles, antibiofilm silver nanoparticles, plant extract contribution, drug resistant microbes, UV‐vis spectroscopy, transmission electron microscope, Fourier transform infrared spectroscopy, X‐ray diffraction, Image J software, resistant strains, susceptible strains, Gram positive bacteria, fungus, protein leakage assays, carbohydrate leakage assays, cell lysis, DNA damage, Ag     

Metal nanoparticles generated by laser ablation

We study a new method for producing ultrafine metal particles (nanopartides) that employs Laser Ablation of Microparticles (LAM). Pulsed excimer laser radiation at 248 nm wavelength was used to ablate ~2 μm feedstock of silver, gold, andpermalloy (Ni₈₁%:Fe_19%) under both normal atmospheric conditions and in other gases and pressures. A model for nanoparticle formation by LAM is proposed that includes plasma breakdown and shock-wave propagation through the initial microparticle. Behind the shock a large fraction of the original microparticle mass is converted to nanoparticles that diffuse to silicon substrates and TEM grids for collection and analysis. Nanoparticle morphologies are spherical except for gold nanoparticles >100 nm that are generally cubes. Electron micrographs of the samples were analyzed by computer-aided image processing to determine the effect of irradiation conditions on the nanoparticle size distribution. The results showed that mean particle diameters were normally in the range from 10 to 100 nm and that the particle size distributions were generally log-normal, with dispersion (diameter/standard deviation) ranging from 0.2 to 0.5. For metallic microparticle feedstock, the mean size of the produced nanoparticles generally increased with increasing laser fluence and were smallest for fluences not too far above the breakdown threshold.     

TiO2 nanoparticles co-doped with silver and nitrogen for antibacterial application

We have prepared a series of TiO2 nanoparticles for antibacterial applications. These TiO2 nanoparticles were prepared by the hydrolysis precipitation method with Ti(OBu)4, silver nitrate and ammonia. Crystal structure, particle size, interfacial structure and UV-visible light response of the prepared nanoparticles were characterized by X-ray diffraction measurements (XRD), Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR) and UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRs). The XRD spectra showed that all samples were anatase structure calcined at 450 degrees C for 3 hours. The Ag doping made the peak of diffraction wider. The results of TEM showed that the nanoparticles of TiO2, N-TiO2 and 1% Ag-N-TiO2 were all spherical in shape and well distributed with a mean size of 19.8 nm, 39.2 nm and 20.7 nm, respectively. N doping caused the nanoparticle size to increase, while, when the doped amount of Ag+ increased, the TiO2 particle size decreased. The FTIR revealed that Ag and N doping of TiO2 appeared to have strong absorption by -OH group and showed the characteristic absorption band of NH4+ and Ag. The UV-Vis-DRs indicated that the absorption band of Ag-N co-doped TiO2 had red shift and that the optical absorption response (between 400 nm and 700 nm) had obvious enhancement. The antibacterial properties of nanoparticles were investigated by agar diffusion method toward Escherichia coli and Bacillus subtilis. The results indicated that both Ag- and N-doped TiO2 could increase the antibacterial properties of TiO2 nanoparticles under fluorescent light irradiation. A 1% Ag-N-TiO2 had the highest antibacterial activity with a clear antibacterial circle of 33.0 mm toward Escherichia coli and 22.8 mm toward Bacillus subtilis after cultivation for 24 hours.     

Preparation of nickel nanoparticles for catalytic applications

Spherical oxidized nickel particles 15 to 200 nm in average size have been produced by a crucibleless aerosol method involving metal vapor condensation in an inert gas flow and oxidation processes. The particles have been characterized by scanning electron microscopy, X-ray microanalysis, X-ray diffraction, BET surface area measurements, and vibrating-sample magnetometry. The process parameters have been optimized for the preparation of particles with tailored size, specific surface area, and saturation magnetization. A dc electric field applied to the condensation zone during the oxidation process reduces the size and increases the extent of oxidation of the particles. We have studied low-temperature oxidation of carbon monoxide and propane on nickel nanopowders differing in particle size and extent of oxidation. The nanoparticles with optimized characteristics have been shown to have a marked catalytic effect on these processes.     

Antimicrobial active silver nanoparticles and silver/polystyrene core-shell nanoparticles prepared in room-temperature ionic liquid

Uniform silver nanoparticles and silver/polystyrene core-shell nanoparticles were successfully synthesized in a room temperature ionic liquid, 1-n-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]·BF₄). [BMIM]·BF₄ plays a protective role to prevent the nanoparticles from aggregation during the preparation process. Transmission electron micrographs confirm that both silver nanoparticles and core-shell nanoparticles are regular spheres with the sizes in the range of 5–15 nm and 15–25 nm, respectively. The X-ray diffraction analysis reveals the face-centered cubic geometry of silver nanoparticles. The as-prepared nanoparticles were also characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, UV–vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy. In addition, antimicrobial activities against E. coli and S. aureus were studied and the results show that both silver nanoparticles and core-shell nanoparticles possess excellent antimicrobial activities. The antimicrobial mechanism of the as-prepared nanoparticles was discussed.     

载Ag/Cu纳米粒子多孔聚丙烯腈复合纤维膜的制备及其抑菌性

金属纳米粒子因其独特的物理化学性能,在催化、抑菌、水污染处理和生物医学等领域表现出巨大的应用前景。但是金属纳米粒子在制备和使用过程中容易发生团聚而影响其性能。因此,提高金属纳米粒子的稳定性,对提升其应用性能具有重大意义。本文在以聚丙烯腈(PAN)为基体,聚乙烯吡咯烷酮(PVP)为致孔剂,基于静电纺丝技术制得多孔聚丙烯腈纳米纤维(PPAN NFs)的基础上,通过浸渍沉积法分别制备出负载银纳米粒子(Ag NPs)复合纳米纤维(Ag-PPAN NFs)和负载铜纳米粒子(Cu NPs)复合纳米纤维(Cu-PPAN NFs)。在利用FESEM、EDS、XRD等方法对制备纤维膜的形貌和结构进行表征的基础上,通过抑菌圈法和FESEM观察经复合纳米纤维处理前后的细菌形貌来研究Ag-PPAN NFs和Cu-PPAN NFs对大肠杆菌、金黄色葡萄球菌和白色念球菌的抑菌性能。研究结果发现：PPAN NFs可有效解决Ag NPs和Cu NPs在制备和使用过程中易于聚集的问题,制得的复合纳米纤维对大肠杆菌、金黄色葡萄球菌和白色念球菌具有一定的抗菌活性,可成为一种新型的抗菌纤维材料。     

Formation of silver nanoparticles by through thin film ablation

Well dispersed Ag nanoparticles have been formed by a process denoted Through Thin Film Ablation. The nanoparticles were deposited on room temperature substrates, had a most probable size of 1 nm, and were not agglomerated. The nanoparticle deposit produced by this process showed no evidence of the larger particles commonly observed from conventional pulsed laser ablation that uses a bulk target. Synthesis of nanoparticles by Through Thin Film Ablation should be possible for any material that can be made as a thin film target and may enable the unique properties of isolated, non-agglomerated nanoparticles to be exploited more fully.     

银纳米粒子的制备及其在光催化中的应用

在乙醇/水溶剂中,以AgNO3为银源、聚乙烯吡咯烷酮为稳定剂,采用溶剂热还原法合成纳米银.通过调变乙醇-水的相对比例、AgNO3浓度和反应时间等,获得了尺寸均匀的准球形、立方体、线状等不同形貌的银纳米颗粒,利用XRD、SEM、TEM和紫外-可见吸收光谱进行了表征.初步考察了球形纳米银(粒径分布30～70nm)和立方纳米银(粒径80～140nm)修饰介孔二氧化钛对甲基橙的光催化降解性能,结果表明两种纳米银粒子对TiO2的光催化均具有增效作用,且银粒径越小,对光催化活性的提高越显著.