共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
MolecularDopedPolymerLightEmitingDiodeswithAir-stableAluminumasCathode①②CHENBaijun,HOUJingying.XUEShanhua,LIUShiyong(StateKey... 相似文献
3.
4.
Magneto-opticCurrentSensorBasedonTotalReflectionsinaQuadrangularBulkGlass¥CHENXikun;QIUJinghe;ZHUQibiao;DAILaifa(ShanghaiUniv... 相似文献
5.
6.
7.
8.
OPTICALFIBER-MOBILECOMMUNICATION¥FENGXi-Yu;SUNTie-Cheng(DalianUniversityofTechnologyDalian116023)Abstract:Thetechniqueofmobil... 相似文献
9.
10.
11.
高压MZ—JTE终端边界元数值模拟 总被引:2,自引:0,他引:2
本文采用边界元数值方法,编制了统一的多区结终端扩展(Multiple-Zone Junction Ter-mination Extension,MZ-JTE)边界元程序,模拟高压MZ-JTE终端电场,电位分布,以平面结算例验证了边界元数值解精度及可靠性,定量模拟了界面态影响,取得了与国外用差分或有限元得到的结论相一致的结果。边界元方法的提出与算法,程序的成功开发,为MZ-JTE结构及其它终端结构的 相似文献
12.
Zhonggui Xiang Tse-Tong Chia 《Antennas and Propagation, IEEE Transactions on》2001,49(2):165-173
An effective hybrid boundary-element method (BEM) and wavelet-transform method (WTM) is proposed to analyze electromagnetic scattering from three-dimensional (3-D) open-ended cavities with arbitrary shapes. This hybrid technique formulates the original cavity problems by a magnetic field integral equation. The BEM is employed to establish the mapping between the original complex integral surface and the unit square. The WTM is used to reduce the density of the moment matrix. Since a surface integral equation has to be solved, the WTM requires a two-dimensional (2-D) wavelet basis to implement the numerical computation. The previous fast iterative algorithm for 2-D wavelets has been extended for efficiently constructing various 2-D wavelet basis functions by a tensorial product from two one-dimensional (1-D) regular multiresolution analyses. Unlike the conventional method of moments, the proposed hybrid technique can always obtain sparse moment matrix equations, which can be efficiently solved by sparse solvers. As the level scales for numerical discretization of cavities increase, larger compression rates can be obtained, which makes it possible for the hybrid BEM/WTM technique to efficiently solve scattering from large open-ended cavities with complex terminations. Numerical results are presented to demonstrate the merits of the proposed method 相似文献
13.
A hybrid method is presented for incorporating general terminations into the solution of lossy multiconductor transmission lines (MTLs). The terminations are characterized by a state-variable formulation which allows a general characterization of dynamic as well as nonlinear elements in the termination networks. The method combines the second-order accuracy of the finite difference-time domain (FDTD) algorithm for the MTL with the absolutely stable, backward Euler discretization of the state-variable representations of the termination networks. A compact matrix formulation of the recursion relations at the interface between the MTL and the termination networks allows a straightforward coding of the algorithm. Skin effect losses of the line conductors as well as the effect of an incident field are easily incorporated into the algorithm. Several numerical examples are given which contain dynamic and nonlinear elements in the terminations. These examples demonstrate the validity of the method and show that the temporal and spatial step sizes can be maximized, thereby minimizing the computational burden 相似文献
14.
15.
The ROXIE program developed at CERN for the design and optimization of the superconducting LHC magnets has been recently extended in a collaboration with the University of Stuttgart, Germany, with a field computation method based on the coupling between the boundary element (BEM) and the finite element (FEM) technique. This avoids the meshing of the coils and the air regions, and avoids the artificial far field boundary conditions. The method is therefore specially suited for the accurate calculation of fields in the superconducting magnets in which the field is dominated by the coil. We will present the fringe field calculations in both 2d and 3d geometries to evaluate the effect of connections and the cryostat on the field quality and the flux density to which auxiliary bus-bars are exposed 相似文献
16.
本文报道的是用边界元素法计算阶梯开口波导的反射系数。文中给出了用边界元素法求解波动方程问题的主要步骤和公式,并对本问题的一些计算细节作了说明。把在特殊状态下得到的结果与有关文献中的结果作了比较,从而看出这种方法的有效性。 相似文献
17.
Excitation of currents on an insulated conductor of finite length and with arbitrary terminations is studied for a magnetic dipole source. For matched terminations, the results agree closely with previous results for an infinitely long conductor, but other terminations produce end reflections that cause standing waves. Specific calculations for a vertical magnetic dipole source are presented, because this source produces the appropriate horizontal electric field and could be used in a borehole-to-borehole configuration. Numerical results for the induced current and secondary magnetic field indicate that long conductors produce a strong anomaly over a broad frequency range for any type of termination 相似文献
18.
Linear lumped loads in the FDTD method using piecewise linear recursive convolution method 总被引:1,自引:0,他引:1
Jung-Yub Lee Jeong-Hae Lee Hyun-Kyo Jung 《Microwave and Wireless Components Letters, IEEE》2006,16(4):158-160
This letter gives a new algorithm to include linear lumped elements into finite difference time domain algorithm. The proposed method can efficiently account for two-terminal networks made of several lumped elements. The piecewise linear recursive convolution (PLRC) technique is used to implement lumped loads into Yee cells. Using this method, it is possible to simulate equivalent circuits of terminations for microstrip structures, integrated circuits, or digital devices. The advantage of the PLRC technique is addressed and simulation results validating this method are presented. 相似文献
19.
Nikolaos A. Tsatsoulis Yiorgos I. Bontzios Michael G. Dimopoulos Alkis A. Hatzopoulos 《Microelectronics Journal》2013
A new closed-form formula for the computation of the coupling capacitance of metal tiles is presented in this work. It exploits the analytical solution of the Laplace equations of equivalent studied problems. Comparative results are given with two commercial tools employing the boundary element method (BEM) and the finite element method (FEM). The results show that the capacitance value computed by the proposed formula is in close agreement to the value obtained by the simulators. 相似文献