Synthesis and Derivatization of Substituted (R)‐ and (S)‐ C‐Allylglycines

Various (R)‐ and (S)‐C‐allylglycine derivatives were synthesized by means of an auxiliary controlled diastereoselective aza‐Claisen rearrangement. Starting from (S)‐configured auxiliaries derived from optically active proline, an aza‐Claisen rearrangement enabled us to synthesize α(R)‐configured γ,δ‐unsaturated amides. Since (R)‐allylglycine derivatives could be directly generated by reacting N‐allylproline derivatives and various protected glycine fluorides, the corresponding (S)‐enantiomers were built‐up via an initial α‐chloroacetyl chloride rearrangement and a subsequent chloride azide substitution with complete inversion of the configuration. High diastereoselectivities were obtained (>15 : 1). The auxiliary could be efficiently removed by organolithium reactions of the amides furnishing α‐amino ketones. Another allyllithium addition allowed us to introduce a second allyl chain with high diastereoselectivity. Final ring closures by means of metatheses using Grubbs' (I) catalyst gave raise to the formation of enantiopure phenanthridines and cyclohexenes displaying defined substitution patterns ready for alkaloid total syntheses.     

Palladium‐Catalyzed Carbonylative Synthesis of 2,3‐Disubstituted Chromones

An unexpected palladium‐catalyzed carbonylative synthesis of 2,3‐disubstituted chromones has been developed. Starting from 2‐bromofluorobenzenes and ketones, the corresponding chromones were produced in good yields. By control experiments, this transformation was found to proceed through a sequential carbonylation/Claisen–Hasse rearrangement/intramolecular nucleophilic aromatic substitution approach (S_NAr). More specifically, the reaction sequence started with a palladium‐catalyzed carbonylation of the ketone with o‐bromofluorobenzene to give the vinyl benzoates, which subsequently transformed into 1,3‐diketones via a Claisen–Hasse rearrangement. The final products were produced after an intramolecular S_NAr reaction of the in situ formed 1,3‐diketone.

     

Formation of Arenes via Diallylarenes: Strategic Utilization of Suzuki–Miyaura Cross‐Coupling,Claisen Rearrangement and Ring‐Closing Metathesis

Two new synthetic strategies for benzoannulation are reported. The first strategy is based on the Suzuki–Miyaura cross‐coupling reaction. To this end, various ortho‐diallylbenzene derivatives were prepared from the corrresponding diiodo derivatives by an allylation strategy using an allylboronate as coupling partner. These diallyl derivatives were subjected to a ring‐closing metathesis (RCM) and one‐pot dichlorodicyanoquinone (DDQ) oxidation sequence to deliver 2‐substituted naphthalenes. In the second strategy, a double Claisen rearrangement and RCM protocol have been used as key steps to give highly functionalized benzoannulated quinone derivatives.     

Ruthenium Catalyzed Selective Regio‐and‐Mono‐Allylation of Cyclic 1,3‐Diketones Using Allyl Alcohols as Substrates

The new ruthenium‐sulfonate catalyst Ru(Cp*)(η³‐C₃H₅) (p‐CH₃C₆H₄SO₃)₂, (Cp*=pentamethylcyclopentadienyl), rapidly and regioselectively mono‐allylates dimedone to the branched products using substituted allyl alcohols as substrates, without acid, base or other additives, under relatively mild conditions. We consider the ruthenium sulfonate to be a “green” alternative in that it uses allyl alcohols as substrate, (rather than carbonates, acetates, etc.) and therefore does not waste the leaving group. The catalyst induces rapid double allylation of various 1,3‐diketones in high yield using allylic alcohol.     

A New Class of 3′‐Sulfonyl BINAPHOS Ligands: Modulation of Activity and Selectivity in Asymmetric Palladium‐Catalysed Hydrophosphorylation of Styrene

Palladium‐catalysed monophosphorylation of (R)‐2,2′‐bisperfluoroalkanesulfonates of BINOL (R^F=CF₃ or C₄F₉) by a diaryl phosphinate [Ar₂P(O)H] followed by phosphine oxide reduction (Cl₃SiH) then lithium diisopropylamide‐mediated anionic thia‐Fries rearrangement furnishes enantiomerically‐pure (R)‐2′‐diarylphosphino‐2′‐hydroxy‐3′‐perfluoralkanesulfonyl‐1,1′‐binaphthalenes [(R)‐ 8ab and (R)‐ 8g–j ], which can be further diversified by Grignard reagent (RMgX)‐mediated CF₃‐displacement [→(R)‐ 8c–f ]. Coupling of (R)‐ 8a–j with (S)‐1,1′‐binaphthalene‐2,2′‐dioxychlorophosphine (S)‐ 9 generates 3′‐sulfonyl BINAPHOS ligands (R,S)‐ 10a–j in good yields (43–82%). These new ligands are of utlility in the asymmetric hydrophosphonylation of styrene ( 1 ) by 4,4,5,5‐tetramethyl‐1,3,2‐dioxaphospholane 2‐oxide ( 2 ), for which a combination of the chiral ligands with either [Pd(Cp)(allyl)] or [Pd(allyl)(MeCN)₂]⁺/NaCH(CO₂Me)₂ proves to be a convenient and active pre‐catalyst system. A combination of an electron‐rich phosphine moiety and an electron‐deficient 3′‐sulfone moiety provides the best enantioselectivity to date for this process, affording the branched 2‐phenethenephosphonate, (−)‐iso‐ 3 , in up to 74% ee with ligand (R,S)‐ 10i , where Ar=p‐anisyl and the 3′‐SO₂R group is triflone.     

Efficient Asymmetric Synthesis of 2,6‐Disubstituted 2H‐Dihydropyrans via a Catalytic Hetero‐Diels–Alder/Allylboration Sequence

[4+2] Cycloaddition of (E)‐3‐borylacrolein 1 with ethyl vinyl ether, catalysed by chromium complex (1R,2S) or (1S,2R) 2 , led to the corresponding cycloadducts with high diastereo‐ and enantioselectivities. Further reaction with aldehydes offers an attractive asymmetric route to synthetically useful substituted 3,4‐dihydro‐2H‐pyrans.     

Enantioselective Additions of Aryltitanium Tris(isopropoxide) to Ketones: Structure of [(i‐PrO)2Ti{μ‐(S)‐BINOLate}(μ‐O‐i‐Pr)TiPh(O‐i‐Pr)2], Study of Mechanistic and Stereochemical Insights

Aryl addition reactions of ArTi(O‐i‐Pr)₃ to aromatic, heteroaromatic, or α,β‐unsaturated ketones are described, producing tertiary alcohols in good to excellent enantioselectivities of up to 97% ee. The structure of the dititanium complex [(i‐PrO)₂Ti{μ‐(S)‐BINOLate}(μ‐O‐i‐Pr)TiPh(O‐i‐Pr)₂] [(S)‐ 4 ] that simultaneously bears a chiral directing ligand and a nucleophile is reported. Complex (S)‐ 4 possesses a pocket structure and has been illustrated as the key active species for addition reactions of both aldehydes and ketones. Mechanistic and stereochemical insights concerning addition reactions of organometallic reagents to organic carbonyls are rationalized based on the pocket structure and pocket size of (S)‐ 4 .     

Synthesis of 6‐amino acid substituted 4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizines

In the presence of Na₂CO₃ (1S,3S)‐ and (1R,3S)‐1‐(2,2‐dimethoxyethyl)‐2‐(1,3‐dioxobutyl)‐3‐(1,3‐dioxo‐butyl)oxymethyl‐1,2,3,4‐tetrahydrocarboline ( 1 ) were transformed into (1S,3S)‐ and (1R,3S)‐1‐(2,2‐dimethoxyethyl)‐2‐(1,3‐dioxobutyl)‐3‐hydroxymethyl‐1,2,3,4‐tetrahydrocarboline ( 2 ), which were cyclized to (6S)‐3‐acetyl‐6‐hydroxymethyl‐4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizine ( 4 ), via(6S,12bS)‐ and (6S,12bR)‐3‐acetyl‐2‐hydroxyl‐6‐hydroxymethyl‐1,2,3,4,6,7,12,12b‐octahydro‐4‐oxoindolo[2,3‐a]quinoline ( 3 ). (6S)‐ 4 was coupled with Boc‐Gly, Boc‐L‐Asp(β‐benzyl ester), or Boc‐L‐Gln to give 6‐amino acid substituted (6S)‐3‐acetyl‐4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizines 5a , 5b , or 5c , respectively. After the removal of Boc from (6S)‐ 5a (6S)‐3‐acetyl‐6‐glycyl‐4,6,7,12‐tetrahydro‐4‐oxoindolo[2,3‐a]quinolizine ( 6 ) was obtained. The anticancer activities of (6S)‐ 5 and (6S)‐ 6 in vitro were tested.     

Synthesis of chitosan‐graft‐poly[2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate] copolymer from a novel monomer,prepared using a Morita–Baylis–Hillman reaction,and characterization of its antimicrobial activity

A novel method has been developed to modify the natural polymer chitosan. The process utilizes a monomer prepared by employing a Morita–Baylis–Hillman (MBH) reaction. Specifically, the vinyl monomer 2‐[hydroxy(pyridin‐3‐yl)methyl]acrylonitrile (HPA) was synthesized using a high‐yielding MBH reaction of acrylonitrile with pyridine‐3‐carboxaldehyde in the presence of 1,4‐diazabicyclo[2.2.2]octane. Conversion of HPA to 2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate (CPA) was then carried out by reaction of acryloyl chloride. The highly functionalized monomer CPA was grafted onto chitosan through a reaction in 2% acetic acid containing a persulfate and a sulfite (K₂S₂O₈/Na₂SO₃) as redox promoter. An optimal grafting percentage of 123% is obtained when the grafting process is conducted at 60 °C for 4 h employing a 1:0.5 ratio of K₂S₂O₈ and Na₂SO₃ at a concentration of 2.5 × 10^?3 mol L^?1. Chitosan‐graft‐poly[2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate] graft copolymers, having various grafting percentages, were characterized using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopies, X‐ray diffraction, thermogravimetric analysis and scanning electron microscopy. Finally, the results of studies probing the antimicrobial activities of the polymers against selected microorganisms show that the graft copolymers display higher growth inhibition activities against bacteria and fungi than does chitosan. © 2014 Society of Chemical Industry     

Biomimetic Formation of 2‐Tropolones by Dioxygenase‐Catalysed Ring Expansion of Substituted 2,4‐Cyclohexadienones

Substituted 2‐tropolone natural products are found in plants and fungi. Their biosynthesis is thought to occur by ring expansion from a cyclohexadienone precursor, but this reaction has not previously been demonstrated experimentally. Treatment of 6‐hydroxy‐6‐hydroxymethylcyclohexa‐2,4‐dienone with the non‐haem iron(II)‐dependent extradiol catechol dioxygenase MhpB from Escherichia coli results in the formation of the 2‐tropolone ring‐expansion product through a pinacol‐type rearrangement. Three further substituted cyclohexa‐2,4‐dienone analogues were prepared, and treatment of each analogue was found to give the substituted 2‐tropolone ring‐expansion product. This ring expansion could also be effected nonenzymatically by treatment with 1,4,7‐triazacyclononane and FeCl₂. This is a novel transformation for non‐haem iron‐dependent enzymes, and this is the first experimental demonstration of the proposed ring‐expansion reaction in tropolone biosynthesis.     

Design of gem‐Difluoro‐bis‐Tetrahydrofuran as P2 Ligand for HIV‐1 Protease Inhibitors to Improve Brain Penetration: Synthesis,X‐ray Studies,and Biological Evaluation

The structure‐based design, synthesis, biological evaluation, and X‐ray structural studies of fluorine‐containing HIV‐1 protease inhibitors are described. The synthesis of both enantiomers of the gem‐difluoro‐bis‐THF ligands was carried out in a stereoselective manner using a Reformatskii–Claisen reaction as the key step. Optically active ligands were converted into protease inhibitors. Two of these inhibitors, (3R,3aS,6aS)‐4,4‐difluorohexahydrofuro[2,3‐b]furan‐3‐yl(2S,3R)‐3‐hydroxy‐4‐((N‐isobutyl‐4‐methoxyphenyl)sulfonamido)‐1‐phenylbutan‐2‐yl) carbamate ( 3 ) and (3R,3aS,6aS)‐4,4‐difluorohexahydrofuro[2,3‐b]furan‐3‐yl(2S,3R)‐3‐hydroxy‐4‐((N‐isobutyl‐4‐aminophenyl)sulfonamido)phenylbutan‐2‐yl) carbamate ( 4 ), exhibited HIV‐1 protease inhibitory K_i values in the picomolar range. Both 3 and 4 showed very potent antiviral activity, with respective EC₅₀ values of 0.8 and 3.1 nM against the laboratory strain HIV‐1_LAI. The two inhibitors exhibited better lipophilicity profiles than darunavir, and also showed much improved blood–brain barrier permeability in an in vitro model. A high‐resolution X‐ray structure of inhibitor 4 in complex with HIV‐1 protease was determined, revealing that the fluorinated ligand makes extensive interactions with the S2 subsite of HIV‐1 protease, including hydrogen bonding interactions with the protease backbone atoms. Moreover, both fluorine atoms on the bis‐THF ligand formed strong interactions with the flap Gly 48 carbonyl oxygen atom.     

Functionalized N‐(4‐hydroxy phenyl) maleimide monomers: Kinetics of thermal polymerization and degradation using model‐free approach

N‐(4‐Hydroxy phenyl) maleimide (HPMI) is prepared and is functionalized with acryloyl, methacryloyl, allyl, propargyl, and cyanate groups. The structural and thermal characterizations of the materials are done using FTIR, NMR, DSC, and TGA. Curing and degradation kinetics are performed using Flynn–Wall–Ozawa, Vyazovkin, and Friedman methods. Activation energies (E_a) for the polymerization of the synthesized monomers varied and are dependent on the nature of the functional group present in HPMI. The propargyl functionalized monomer shows the highest E_a values whereas the methacryloyl functionalized monomer shows the lowest E_a values. In the case of thermal degradation of the polymerized materials, the apparent E_a values for acryloyl, methacryloyl and cyanate functionalized materials are slightly higher than that of poly‐HPMI (PHPMI). The thermally cured allyl and propargyl functionalized materials show a different trend and may be attributed to the complications arising due to Claisen rearrangement reaction during the thermal curing. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39935.     

Preparation of vinyl polymers bearing photo‐labile diethylthiocarbamoylthiyl (S2CNEt2) groups via ATRP

Direct synthesis of vinyl polymers functionalized with photo‐labile diethylthiocarbamoylthiyl (S₂CNEt₂) groups was reviewed via three living polymerization procedures: normal atom‐transfer radical polymerization (ATRP), reverse ATRP and photo ATRP. The S₂CNEt₂ group was transferred by mediating the dormant–active species equilibrium in the course of polymerization and eventually ω‐terminating the resulting polymer chain. ATRP of methyl methacrylate (MMA) was successfully performed with a p‐toluenesulfonyl chloride/Cu(S₂CNEt₂)/2,2′‐bipyridine(bpy) or benzoyl peroxide (BPO)/Cu(S₂CNEt₂)/bpy initiation system. The oxidized complex, Cu(S₂CNEt₂)Cl/bpy, catalyzed the reverse ATRP of vinyl monomers initiated with BPO or 2,2′‐azobisisobutyronitrile (AIBN), producing tailor‐made polymers with ω‐S₂CNEt₂ groups and a narrow molecular‐weight distribution. Without external ligands, the living polymerization of vinyl monomers was achieved under the thermal initiation of diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS) in conjunction with Fe(S₂CNEt₂)₃ catalyst. Photo ATRP of MMA and styrene was first realized in the presence of 2,2‐dimethoxy‐2‐phenylacetophenone (DMPA)/Fe(S₂CNEt₂)₃ under UV irradiation at ambient temperature. Copyright © 2004 Society of Chemical Industry     

Novel 3‐Carboxy‐ and 3‐Phosphonopyrazoline Amino Acids as Potent and Selective NMDA Receptor Antagonists: Design,Synthesis, and Pharmacological Characterization

The design and synthesis of new N1‐substituted 3‐carboxy‐ and 3‐phosphonopyrazoline and pyrazole amino acids that target the glutamate binding site of NMDA receptors are described. An analysis of the stereochemical requirements for high‐affinity interaction with these receptors was performed. We identified two highly potent and selective competitive NMDA receptor antagonists, (5S,αR)‐ 1 and (5S,αR)‐ 4 , which exhibit good in vitro neuroprotective activity and in vivo anticonvulsant activity by i.p. administration, suggesting that these molecules may have potential use as therapeutic agents.     

Synthesis of p‐aminophenol from the hydrogenation of nitrobenzene over metal–solid acid bifunctional catalyst

BACKGROUND: A single‐step conversion of nitrobenzene (NB) to p‐aminophenol (PAP) through catalytic hydrogenation is a widely used synthesis route for PAP. The main shortcoming of this route is the use of sulfuric acid for rearrangement of the phenylhydroxylamine (PHA) intermediate. In this paper, S₂O₈^2?/ZrO₂ (PSZ) solid acid and Pt‐S₂O₈^2?/ZrO₂ (Pt‐PSZ) bifunctional catalysts were prepared for the synthesis of PAP in non‐acid medium. RESULTS: Calcination temperature has a substantial effect on the acidity, structure and activity for PHA rearrangement of PSZ. The highest PAP yield was 33.8% over PSZ calcined at 823 K when the reaction was carried out in water at 423 K. A high PAP yield of 23.9% was achieved by a single‐step reaction of nitrobenzene over Pt‐PSZ bifunctional catalysts. CONCLUSION: PSZ solid acid exhibits high activity for PHA rearrangement. Perfect tetragonal ZrO₂ and much stronger acid sites play important roles in catalytic activity. Inhibiting the hydrogenation activity by reducing the amount of Pt loading on Pt‐PSZ can improve the competition of PHA rearrangement on acid sites with hydrogenation of PHA on metal active sites, resulting in better selectivity to PAP. Copyright © 2008 Society of Chemical Industry     

Direct Preparation of 7‐Allyl‐ and 7‐Arylindolines

Addition of allyl halides to the organolithium species derived from lithiation of N‐tert‐butoxycarbonylindoline with sec‐butyllithium (sec‐BuLi) and tetramethylethylenediamine (TMEDA) occurs regioselectively by S_N2 allylation. In contrast, the organolithium species can be transmetalated to the mixed zinc cuprate that undergoes regioselective S_N2′ allylations. Transmetalation to the organozinc chloride allows a Negishi‐type cross‐coupling reaction with aryl bromides using palladium catalysis with triphenylphosphine (PPh₃) as ligand. The chemistry was applied to a very short synthesis of 7‐prenylindole and of the alkaloid vasconine.     

A New Chiral P,N‐Ligand Derived from 1‐Phenylphospholane‐2‐carboxylic Acid (Phenyl‐P‐proline) for Palladium‐Catalyzed Asymmetric Allylic Substitution Reactions

New types of P,N‐ligands, cis‐ and trans‐ 3 , containing a tetrahydroisoquinoline skeleton as an N‐donor were synthesized from (1R,2S)‐1‐phenylphospholane‐2‐carboxylic acid (phenyl‐P‐proline, 1 ). The cis isomer, cis‐ 3 , was found to act as an excellent ligand in palladium‐catalyzed asymmetric allylic substitution reactions. The reactions of 1,3‐diphenyl‐2‐propenyl acetate ( 5 ) with several nucleophiles in the presence of [Pd(π‐allyl)Cl]₂, cis‐ 3 (Pd : ligand=1 : 2), and a base afforded the desired products in high yields with high enantioselectivity. It was suggested that these ligands did not serve as P,N‐bidentate ligands but as P‐monodentate ligands in these reactions.     

Effect of temperature,solvent, Lewis acid and additives on the polymerization of tert‐butyl vinyl ether using Lewis acid‐induced N‐methyleneamines as cationic initiators

N‐Methyleneamines, formed by treating 1,3,5‐trimethylhexahydro‐1,3,5‐triazines with Lewis acids, have been shown to be capable initiators in the cationic polymerization of tert‐butyl vinyl ether, yielding polymers with amine functionality at the chain ends. Previous work was limited to titanium(IV) chloride (TiCl₄) as the Lewis acid in dichloromethane solvent at 0 °C (with resulting polymers possessing relatively broad polydispersity index (PDI) values near 2), while this contribution details the effect of reaction parameters on the polymeric products; specifically, the role of temperature, solvent, Lewis acid and additives. Ultimately, performing the polymerization at ?78 °C in dichloromethane with TiCl₄ as the Lewis acid and tetra‐n‐butylammonium chloride (nBu₄NCl) as the additive afforded the best control over the system, with polymers formed possessing low PDI values (<1.2). Dramatic changes in number‐average molecular weight and PDI were observed in polymers formed by initiating systems of Lewis acid‐induced N‐methyleneamines, with temperature, solvent, Lewis acid and additives all playing a role. By varying single parameters, optimization of the system was achieved. Copyright © 2009 Society of Chemical Industry     

In vitro Characterization of Enzymes Involved in the Synthesis of Nonproteinogenic Residue (2S,3S)‐β‐Methylphenylalanine in Glycopeptide Antibiotic Mannopeptimycin

Mannopeptimycin, a potent drug lead, has superior activity against difficult‐to‐treat multidrug‐resistant Gram‐positive pathogens such as methicillin‐resistant Staphylococcus aureus (MRSA). (2S,3S)‐β‐Methylphenylalanine is a residue in the cyclic hexapeptide core of mannopeptimycin, but the synthesis of this residue is far from clear. We report here on the reaction order and the stereochemical course of reaction in the formation of (2S,3S)‐β‐methylphenylalanine. The reaction is executed by the enzymes MppJ and TyrB, an S‐adenosyl methionine (SAM)‐dependent methyltransferase and an (S)‐aromatic‐amino‐acid aminotransferase, respectively. Phenylpyruvic acid is methylated by MppJ at its benzylic position at the expense of one equivalent of SAM. The resulting β‐methyl phenylpyruvic acid is then converted to (2S,3S)‐β‐methylphenylalanine by TyrB. MppJ was further determined to be regioselective and stereoselective in its catalysis of the formation of (3S)‐β‐methylphenylpyruvic acid. The binding constant (K_D) of MppJ versus SAM is 26 μM . The kinetic constants with respect to k_{cat Ppy} and K_{M Ppy}, and k_{cat SAM} and K_{M SAM} are 0.8 s^?1 and 2.5 mM , and 8.15 s^?1 and 0.014 mM , respectively. These results suggest SAM has higher binding affinity for MppJ than Ppy, and the C? C bond formation in βmPpy might be the rate‐limiting step, as opposed to the C? S bond breakage in SAM.     

Optically Active 4‐Substituted (S)‐2‐Phenyl‐2‐oxazolines

(R)‐4‐Hydroxymethyl‐2‐phenyl‐2‐oxazoline (R)‐ 1 ) was prepared from (L)‐serine. The respective tosylate ((S)‐ 2 ) was converted into sulfides (S)‐ 4 and (S)‐ 5 , and sulfone (S)‐ 6 , useful starting materials for the elaboration of additional chiral centers. A previously reported [ α]_D ²⁵ value for (R)‐ 4 is corrected.