W波段V型曲折矩形槽波导行波管的模拟研究

分析了一种新型慢波线-V型曲折矩形槽波导慢波结构,利用电磁仿真软件CST及HFSS对其高频特性进行了模拟计算,并在此基础上设计了工作在W波段的V型曲折矩形槽波导行波管的互作用结构.利用CST粒子工作室对其注-波互作用特性进行了模拟分析.结果表明:W波段V型曲折矩形槽波导行波管能够有效放大微波信号,且频谱纯净.     

微带型曲折线慢波结构的研究

本文对微带型双列曲折线慢波结构中的场进行了分析。用数值求解法计算了电位函数U(y,z)和特征导纳Yc,推导出曲折线的色散方程和耦合阻抗表达式,并利用电子计算机计算了不同结构参量的曲折线特性。由此法所设计的二组曲折线已用于印制电路行波管中。实验结果与理论计算比较一致。     

平面超材料对曲折线慢波结构行波管效率改善和杂模抑制的影响

针对U型曲折线慢波结构带状注行波管杂模抑制和互作用效率提高等面临的挑战,提出了一种开口菱形超材料结构。在综合考虑电路单元谐振性能、与U型曲折线慢波结构之间的协调配合以及电路实现可行性和结构简单等因素,通过电路设计和数值模拟优化等具体措施相结合,探讨这种超材料对增强注波互作用表面电场和抑制电路振荡的效果。在Ka波段优化的结果表明,这种超材料在抑制杂波和改善注波互作用效率方面效果明显,对此类行波管稳定性提高具有重要意义。     

适用于Ka波段圆形电子注行波管的半圆形卷绕微带线慢波结构

提出了一种基于开槽介质基底的卷绕微带线慢波结构.由于金属曲折微带线印制在介质基底的半圆形槽中,这种卷绕微带线慢波结构非常适合圆形电子注行波管,从而使得采用这种新型慢波结构的行波管可以利用传统的周期永磁磁场进行聚焦.文章对提出的卷绕微带线慢波结构的色散特性,耦合阻抗,传输特性及注-波互作用进行了分析.和传统的平面微带线慢波结构相比,提出的卷绕微带线慢波结构具有更低的相速、更弱的色散和更高的耦合阻抗,从而使得其适合于低电压、宽频带、小型化的毫米波行波管.将同步电压及直流电流分别设置为6 550 V及0.1 A的情况下,基于该卷绕微带线慢波结构的Ka波段行波管在35 GHz处能够输出42.32 W的功率,对应增益为26.26 dB,且均匀聚焦磁场只需0.4 T.     

适用于Ka波段圆形电子注行波管的半圆形卷绕微带线慢波结构（英文）

提出了一种基于开槽介质基底的卷绕微带线慢波结构.由于金属曲折微带线印制在介质基底的半圆形槽中,这种卷绕微带线慢波结构非常适合圆形电子注行波管,从而使得采用这种新型慢波结构的行波管可以利用传统的周期永磁磁场进行聚焦.文章对提出的卷绕微带线慢波结构的色散特性,耦合阻抗,传输特性及注-波互作用进行了分析.和传统的平面微带线慢波结构相比,提出的卷绕微带线慢波结构具有更低的相速、更弱的色散和更高的耦合阻抗,从而使得其适合于低电压、宽频带、小型化的毫米波行波管.将同步电压及直流电流分别设置为6 550 V及0.1 A的情况下,基于该卷绕微带线慢波结构的Ka波段行波管在35 GHz处能够输出42.32 W的功率,对应增益为26.26 dB,且均匀聚焦磁场只需0.4 T.     

曲折双脊槽波导高功率宽频带太赫兹行波管

提出一种改进的曲折槽波导—曲折双脊槽波导提高太赫兹行波管的功率和带宽.针对这种新型慢波结构设计了一种新的传输波导作为输入输出能量耦合器.从高频特性仿真结果可以发现曲折双脊槽波导可以提高耦合阻抗并扩展带宽.此外, 粒子仿真结果表明当电子注加载27.4kV电压和0.25A电流时, 新型曲折双脊槽波导行波管在中心频率340GHz处输出功率能达到65.8W同时对应增益27.21dB.因此, 曲折双脊槽波导行波管可以用作宽带和高功率太赫兹辐射源.     

曲折双脊槽波导高功率宽频带太赫兹行波管（英文）

提出一种改进的曲折槽波导—曲折双脊槽波导提高太赫兹行波管的功率和带宽.针对这种新型慢波结构设计了一种新的传输波导作为输入输出能量耦合器.从高频特性仿真结果可以发现曲折双脊槽波导可以提高耦合阻抗并扩展带宽.此外,粒子仿真结果表明当电子注加载27.4kV电压和0.25A电流时,新型曲折双脊槽波导行波管在中心频率340GHz处输出功率能达到65.8W同时对应增益27.21dB.因此,曲折双脊槽波导行波管可以用作宽带和高功率太赫兹辐射源.     

脊加载同轴径向线慢波结构设计

提出脊加载同轴径向线慢波结构,并用高频结构仿真器(HFSS)电磁仿真软件对其色散特性和耦合阻抗进行研究,分析了不同结构参数变化对其高频特性的影响。结果表明:脊加载同轴径向线慢波结构的色散曲线平坦,减小内径和周期长度可以明显降低慢波结构的相速,从而减小工作电压;加载脊的宽度对耦合阻抗的影响明显,随着加载脊宽度的增加,耦合阻抗得到提高,相速减小;加载脊的长度对结构的色散特性和耦合阻抗影响不明显;这种脊加载方式有利于增加慢波结构的耦合阻抗,提高行波管的增益和效率。脊加载同轴径向线慢波结构是一种全金属结构,工作频带宽,散热性能好,在毫米波波段的行波管中有较好的应用前景。     

曲折矩形槽波导慢波系统的高频特性

对曲折矩形槽波导新型慢波系统的高频特性进行了研究，通过理论分析和数值计算，得到了它的色散曲线和耦合阻抗，并分析了结构参数变化时对色散特性和耦合阻抗的影响。曲折矩形槽波导结合了曲折波导散热能力强、色散特性好、容易加工和矩形槽波导单模工作、低损耗、大尺寸等优点，因此这种新型的慢波系统有可能在毫米波及亚毫米波段的行波管中具有较好的发展前景。     

Ka波段曲折双脊单槽加载波导行波管研究

提出了一种新型的曲折波导慢波结构:曲折双脊单槽加载波导慢波结构.利用HFSS、CST电磁仿真软件对工作在Ka波段的曲折双脊单槽加载波导行波管进行了模拟计算,得到其高频特性及注-波互作用特性.结果表明,在33 GHz可以得到265 W的输出功率,增益为37.2 dB,3 dB增益带宽为6 GHz.     

A high-impedance ground plane applied to a cellphone handsetgeometry

A high-impedance electromagnetic surface is a new type of metallic structure exhibiting high surface impedance and the suppression of propagating surface currents at a particular frequency band. We experimentally characterize such a high-impedance surface designed near 2.4 GHz. We describe an antenna built on such a surface, integrated into a printed circuit board that was designed for the form factor of a portable handset. Measurement shows high radiation efficiency near 2.4 GHz     

Analysis of Helix Slow Wave Structure for High Efficiency Space TWT

This paper describes the analysis of helix slow-wave structure (SWS) for a high efficiency space traveling wave tube that is carried out using Ansoft HFSS and CST microwave studio, which is a 3D electromagnetic field simulators. Two approaches of simulating the dispersion and impedance characteristics of the helix slow wave structure have been discussed and compared with measured results. The dispersion characteristic gives the information about axial propagation constant (Beta). Which in turn yields the phase velocity at a particular frequency. The dispersion and impedance characteristics can be used in finding the pertinent design parameters of the helix slow-wave structure. Therefore a new trend has been initiated at CEERI to use Ansoft HFSS code to analysis of the helix slow wave structure in its real environment. The analysis of the helix SWS for Ku-band 140W space TWT has been carried out and compared with experimental results, and found is close agreement.     

Diffraction by a perfectly conducting semi-infinite screen in an anisotropic plasma

The scattering of a plane electromagnetic wave by a perfectly conducting semi-infinite screen embedded in a homogeneous plasma is investigated. A uniform magnetic field is assumed to be impressed externally in a direction parallel to the edge of the half plane. The plasma is idealized to be a dielectric characterized by a tensor dielectric constant. The direction of the incident wave is assumed to be in a plane perpendicular to that of the screen. This vector problem is separable into two equivalent scalar problems for which either the electric or the magnetic vector is parallel to the edge of the half plane. It is found that for the case of theEmode, the magnetic vector parallel to the edge of the half plane satisfies a simple wave equation and a new type of impedance boundary condition on the screen. This problem is formulated in terms of an integral equation which specifies the current induced on the screen. The integral equation is of the Wiener-Hopf type and is solved by the usual function-theoretic methods. For a given orientation of the external magnetic field, a surface wave is found to exist along the screen but on one side only. The characteristics of this surface wave are determined.     

0.14 THz折叠波导行波管慢波结构设计与加工

使用一种显式方法对0.14 THz折叠波导行波管慢波结构进行了快速设计,并通过解析模型、等效电路模型以及电磁场仿真软件(CST MWS)对结构的色散关系和耦合阻抗进行了计算。计算结果表明,0.14 THz附近的色散较为平坦,耦合阻抗在1Ω左右。为了满足大功率输出需求,对初始结构尺寸进行了部分调整。CST PS互作用模拟结果表明,在0.14 THz附近,输出功率大于1 W。用微电火花(EDM)和微铣削方法分别进行了加工实验,结果表明,两种方法在尺寸精确度上均能满足指标要求,微铣削加工能获得更平整、表面粗糙度更好的槽底。     

脊加载环板行波管高频特性的研究

脊加载环板行波管是一种频带相对较宽的大功率行波管,本文用场匹配和变分原理相结合的方法,研究了脊加载环板慢波结构的导波特性及这种行波管的小信号、大信号特性,讨论了结构的几何尺寸及电子注参量对慢波的传播特性、小信号增益及注-波互作用非线性效应的影响.本文的结果将为脊加载环板行波管的设计提供理论基础.     

EBG高阻表面结构的矩形波导宽边缝隙天线

本文提出了波导宽边缝隙天线提高方向图前后辐射比的一种新的实现途径.文中采用在波导宽边上附加EBG (electromagnetic band-gap)高阻表面结构作为高阻接地面的新方法来提高波导缝隙天线方向图的前后辐射比,并对设计的EBG波导缝隙天线单元和阵列的辐射特性进行了仿真分析和实际测量,仿真和测量结果说明该方法对提高矩形波导宽边缝隙天线方向图的前后辐射比是十分有效的.     

大功率毫米波环板行波管注波互作用线性理论研究

考虑了电子注的厚度和相对效应，采和场匹配和变分法中的特殊方法－－Ritz-Galerkin法，导出了考虑电子束空间电荷效应的环板行波管的热然散方程，并对该方程进行数值求解，得到了其小讯号增益，讨论了慢波系统几何尺寸和电子注参量对小信号增益的影响，为毫米波环板行波管的设计提供了理论依据。     

Electromagnetic fields with arbitrary wave impedances generatedinside a TEM cell

It is shown that arbitrary electromagnetic fields and wave impedances can be generated inside a transverse electromagnetic (TEM) cell for RF susceptibility testing. This is achieved by simply exciting one port and terminating the other port with appropriate loads. Thus, TEM cells are not limited to producing a planar field environment with the free-space impedance of 377 Ω, but can also be used to generate high-impedance or low-impedance fields for special testing needs. Experimental results for only three load impedances are described. In principle, many other loads including reactive terminations could be used to create a particularly desired field and wave impedance inside the TEM cell     

Characteristics of Bifilar Helix Circuit

The characteristics of two kinds of bifilar helix circuit are discussed in this paper. One is alike wound bifilar helix and another is contrawound bifilar helix. Alike wound bifilar helix is often used in O-type backward wave tube (BWO). Owing to wider operating bandwidth, higher interaction impedance and large dimensions, the contrawound helix is suitable for broadband millimeter wave traveling wave tube (MMW TWT).