Simplex lattice mixture design approach on physicochemical and sensory properties of wheat chips enriched with different legume flours: An optimization study based on sensory properties

In this study, physicochemical and sensory characteristics of wheat chips enriched with different legume flours were investigated. Wheat chips formulations were composed with the mixture of wheat flour and the mixture of three different legume flours (wheat–legume ratio 80:20). Mixture design approach was used to determine the effect of interactions between pea, chickpea and soy flour on the physicochemical and sensory properties of chips produced with wheat–legume flour mixture. In addition, product optimization was carried out by using ridge analysis to determine the optimum legume flour mixture proportions based on sensory properties of chips samples. Chickpea flour was found to be highest desired component depending on the general acceptability scores of chips. Protein content of chips increased significantly with the addition of soy flour. Optimum limit values of chickpea, pea and soy flour in the legume flour mixture used for the enrichment of the wheat chips were found to be 50–100 g/100 g, 0–60 g/100 g and 0–45 g/100 g legume flour, respectively, with respect to sensory properties. Additionally, ridge analysis results showed that the wheat chips should include only chickpea flour in the legume flour fraction to obtain maximum overall preference score (6.08).     

Characterization and Discrimination of the Floral Origin of Sidr Honey by Physicochemical Data Combined with Multivariate Analysis

Sidr honey represents one of the most expensive monofloral honeys worldwide. The quality control of such honey types usually depends on pollen analysis or comparison of physicochemical characters. In the presented work, 38 different honey samples of which 13 represented genuine Sidr (Ziziphus spina-christy) honey samples were collected from various areas of Yemen. All samples were characterized by physicochemical parameters including moisture content, pH, electrical conductivity, and free acidity. The physicochemical data was subjected to multivariate data analysis including principal component analysis (PCA) and hierarchical cluster analysis (HCA). The development of partial least square discriminant analysis (PLS-DA) model on validation gave 100 % correct classification of the test set samples. All tested honey samples were within the level permitted by the international standards for honey quality. The application of the discriminant technique PLS-DA presented excellent potential for discriminating the botanical origin of Yemeni Sidr honey from other non-Sidr samples and may serve as a discriminant model to be applied to other honey types worldwide.     

Physical and sensory characteristics of cookies prepared with flaxseed flour

BACKGROUND: Flaxseed has many health benefits and is considered a functional food ingredient. Flaxseed flour (0–18%) was used to partially replace wheat flour in cookies and its effects on the physical and sensory characteristics of the cookies were investigated. A correlation analysis was conducted between the instrumental and sensory data. RESULTS: The cookie dough stickiness significantly (P < 0.05) decreased in relation to higher percentages of flaxseed flour. The 18% flaxseed cookies had the firmest texture, darkest color and lowest water activity. The 18% flaxseed cookies had the greatest spread ratio. However, this resulted in cookies of unacceptable quality properties. In consumer acceptance tests, cookies made with 6% and 12% flaxseed flour had the highest rating among all sensory attributes, while the 18% flaxseed cookies had the lowest sensory scores. The flavor attribute was most highly correlated with the overall acceptability (r = 0.90). CONCLUSION: Results indicated that flaxseed flour can be incorporated in cookies as a partial replacement up to 12% of wheat flour without negatively affecting the physical and sensory quality. The correlation results suggest that the flaxseed flavor attributes best predict consumer preference for overall acceptability, though texture and color attributes also contribute. Copyright © 2012 Society of Chemical Industry     

Nutritional assessment of cookies supplemented with defatted wheat germ

Replacement of wheat flour with defatted wheat germ (DFWG) at levels of 0–25% was investigated for its effect on functional and nutritional properties of cookies. The crude protein content of DFWG was as high as 27.8% with a highly valuable amino acid profile, rich in essential amino acids, especially lysine (2.32 g/100 g). The physicochemical and sensory evaluation of cookies, revealed that up to 15% substitution of wheat flour with DFWG produced acceptable cookies similar to the control (100% wheat flour) cookies. The protein quality of the cookies was assessed through weanling albino rats by feeding a diet of cookies for 10 days, which was formulated to supply 10% protein, with a casein diet as a control. The cookies containing 15% DFWG, were best regarding protein bioavailability in rats. The protein efficiency ratio (PER), net protein utilization (NPU), biological value (BV) and true digestibility (TD) differed significantly among diets containing cookies with 0–10% DFWG, and casein diet when fed to rats. Diets containing 15% DFWG have values, of these parameters, similar to the casein diet.     

东北传统发酵豆酱品质分析

为了解东北地区自然发酵豆酱的品质,以采自东北农家43份传统发酵豆酱样品为试材,对其感官指标及理化指标进行检测。利用SPSS 17.0软件对总酸、氨基态氮、NaCl、还原糖、粗蛋白、水分和总游离氨基酸含量等指标与感官品质之间进行相关性分析、主成分分析及聚类分析。最佳豆酱品质:NaCl含量为12~17.75 g/100 g,水分含量为70.35%~78.56%,氨基态氮含量为0.6~0.84 g/100 g,总酸含量为0.78~1.96 g/100 g,还原糖含量为6.06~9.83 g/100 g。     

Discrimination of Chicken Seasonings and Beef Seasonings Using Electronic Nose and Sensory Evaluation

This study examines the feasibility of electronic nose as a method to discriminate chicken and beef seasonings and to predict sensory attributes. Sensory evaluation showed that 8 chicken seasonings and 4 beef seasonings could be well discriminated and classified based on 8 sensory attributes. The sensory attributes including chicken/beef, gamey, garlic, spicy, onion, soy sauce, retention, and overall aroma intensity were generated by a trained evaluation panel. Principal component analysis (PCA), discriminant factor analysis (DFA), and cluster analysis (CA) combined with electronic nose were used to discriminate seasoning samples based on the difference of the sensor response signals of chicken and beef seasonings. The correlation between sensory attributes and electronic nose sensors signal was established using partial least squares regression (PLSR) method. The results showed that the seasoning samples were all correctly classified by the electronic nose combined with PCA, DFA, and CA. The electronic nose gave good prediction results for all the sensory attributes with correlation coefficient (r) higher than 0.8. The work indicated that electronic nose is an effective method for discriminating different seasonings and predicting sensory attributes.     

葡萄籽超微粉添加对曲奇饼干香气的影响

将葡萄籽超微粉碎并添到曲奇饼干中,探究其对曲奇饼干香气成分及感官品质的影响。采用气相色谱-质谱联用仪分别检测了普通葡萄籽粉、葡萄籽超微粉及添加超微粉前后曲奇饼干的香气成分,并结合偏最小二乘判别分析法研究葡萄籽超微粉对曲奇饼干香气成分的影响。结果显示,超微粉碎后香气物质的种类虽未发生明显的改变,但香气成分的相对含量显著增加。葡萄籽超微粉添加比例为5%时,烘烤香比较浓郁。当添加比例达到10%时,曲奇饼干整体风味较为复杂,包括苦杏仁味、香蕉味、水果味/青草味、面包味以及坚果味。采用9点享乐法感官品评结果可以看出,葡萄籽的添加可以为饼干带来可感知的变化,添加比例为5%时,香气得分最高。葡萄籽超微粉会给曲奇饼干香气带来积极的影响,添加比例在10%以内均可被消费者接受。     

Principal component analysis and correlation studies of spring wheats in relation to cookie making quality

Quality of cookies is profoundly influenced by the physicochemical and rheological properties of wheat grains. Therefore, it is pivotal to explore right choice of wheat cultivar. Current study was designed to gauge the relationship between wheat grain physiognomies and flour rheological behaviour with cookie characteristics. The outcomes depicted that selected wheat varieties varied significantly (p < 0.01) in various parameters like thousand kernel weight, test weight, pearling value, Pelshenke and zeleny value. In correlation, particle size index correlated negatively (r = ?0.67) with protein content and positively with water absorption. Spread factor of cookies was influenced by particle size index (r = ?0.63), Pelshenke (r = ?0.62), water absorption (r = ?0.60), and mixographic peak height (r = 0.85). Principal component analysis illustrated that thousand kernel weight, grain length, and width were major components in determining the water absorption of wheat flour. However, spread factor of cookies was partly depicted from Pelshenke value and partly from particle size index.     

Pumpkin oil cake protein as a new carrier for encapsulation incorporated in food matrix: Effect of processing,storage and in vitro digestion on bioactivity

In this paper, valorisation of pumpkin oil cake as source of new protein carrier material for encapsulation was examined in order to enrich real food products. Cookies were used as a model system for addition of encapsulates at three different levels: 10%, 15% and 20%. The physicochemical and sensory properties were investigated, as well as conditions of stability after storage, in terms of total phenolic and betalain content. Furthermore, antioxidant, α-glucosidase and ACE inhibitory potential of cookies was evaluated after simulated gastrointestinal digestion. The cookies showed good technological quality as well as acceptable sensorial properties. The addition of encapsulate increases the total phenolic and betalain contents and shoved significant stability during storage time. Novel peptides were produced after gastrointestinal digestion, which enhanced bioactive properties of enriched products through synergistic action with active compounds from beetroot juice. Obtained digest shoved significant antioxidant, antidiabetic and antihypertension activities, hence ensuring a potential healing effect that could be reached by consuming these cookies.     

Can a structured emulsion (fat in water-fibre system) substitute saturated fat in cookies without hampering their quality?

Replacing fat and saturated fat in baked goods without affecting their quality characteristics is a challenging task. This study evaluated complete and partial substitution of saturated fats (butter and palm oil) by structured emulsions [SE, oil (sunflower) – in – water (fibre-water) emulsion] in cookies by investigating its impact on product quality. Nutritional labelling underlined a drastic reduction in saturated fatty acids [−35% (50% substitution) and −73% (100% substitution)] compared to their conventional counterparts (butter and palm oil). Partial substitution did not markedly affect physicochemical properties, while complete substitution resulted in thinner, harder and darker cookies compared to the controls. Particularly, cookies made with (50:50) structured emulsion – palm oil had the highest sensory scores, and they were perceived as soft, buttery and crunchy. Thus, the use of structured emulsion might be a valuable alternative to develop a potentially healthier product with acceptable sensory properties.     

Application of lysine, taurine, disodium inosinate and disodium guanylate in fermented cooked sausages with 50% replacement of NaCl by KCl

The effects of 50% replacement of NaCl by KCl and addition of the amino acids lysine and taurine and the 5'-ribonucleotide disodium inosinate and disodium guanylate on some sensory and physicochemical parameters of fermented cooked sausages were evaluated. The partial replacement of NaCl by KCl did not alter the manufacturing process; however, defects in the sensory quality were detected. Lysine at a concentration of 0.313% and a mixture of taurine (750 mg/kg) with disodium inosinate (300 mg/kg) and disodium guanylate (300 mg/kg) reduced the sensory defects caused by KCl, allowing the fermented cooked sausages to be elaborated with reduced sodium content and high sensory quality.     

Discrimination of Brazilian artisanal and inspected pork sausages: Application of unsupervised,linear and non-linear supervised chemometric methods

The performance of different chemometric approaches to discriminate artisanal and industrial pork sausages using traditional physicochemical parameters was investigated. A total of 90 samples of sausages marketed in various supermarkets and open-markets in Rio de Janeiro, Brazil were analyzed for their content of moisture, protein, fat, nitrite, sodium and calcium. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used as exploratory methods, while linear and non-linear classification methods, such as k-nearest neighbors (k-NN), soft independent modeling of class analogy (SIMCA), partial least square discriminant analysis (PLSDA) and artificial neural networks (ANN) were used for assessing the data. Different behaviors for all parameters were analyzed between the classes. Principal component analysis and hierarchical cluster analysis did not show a complete discrimination of the samples. KNN and ANN results showed excellent performance for both categories with 100% correct prediction while SIMCA and PLSDA presented performance of 100% and 85.7% for inspected and artisanal sausages, respectively. According to the SIMCA, PLSDA and ANN, the contents of moisture and fat showed the highest discriminative power. Overall, the findings emphasize the use of multivariate techniques to evaluate the quality of processed foods, as pork sausages.     

Characterisation of Malaysian durian (Durio zibethinus Murr.) cultivars: Relationship of physicochemical and flavour properties with sensory properties

The physicochemical (pH, soluble solids, titratable acidity, sugars and organic acids), flavour and sensory properties of five Malaysian durian cultivars (D2, D24, MDUR78, D101 and Chuk) were studied. There were significant differences (P < 0.05) among the five cultivars in terms of all physicochemical characteristics tested with the exception for D2 and MDUR 78, which had similar physicochemical characteristics. Twenty two esters, 14 sulphur compounds, 7 alcohols, 3 aldehydes and 1 ketone were detected in the durian pulp of the five different cultivars using solid-phase microextraction coupled to gas chromatography-time of flight mass spectrometry. Diethyl disulphide, ethyl-n-propyl disulphide, diethyl trisulphide and ethanethiol were the predominant sulphur-containing compounds in all the cultivars. The major esters present in durian were either ethyl propanoate, ethyl-2-methyl butanoate, or propyl-2-methylbutanoate and their levels varied within cultivars. Principal component analysis applied to the data differentiated all cultivars based on 29 volatile flavour compounds exhibiting significant differences (P < 0.05) between cultivars. Principal components 1 and 2 explained 89% of the total variance. A strong correlation was observed between sensory properties with flavour compound and physicochemical characteristics of the fruit.     

Prediction of sensory textural properties from rheological analysis for process cheeses varying in emulsifying salt,protein and moisture contents

Textural characteristics of process cheeses varying in emulsifying salt (disodium phosphate), protein and moisture contents were evaluated by rheological compression using texture profile analysis and by sensory evaluation. The primary objective of this study was to predict sensory textural parameters using instrumental rheological parameters. All sensory parameters correlated with one or more instrumental parameters, e.g. rheological firmness versus sensory firmness (R = 0.98, P < 0.001), rheological chewiness versus sensory rubbery (R = 0.92, P < 0.001) and rheological chewiness versus sensory chewy (R = 0.86, P < 0.001). Partial least squares calibration models were developed for each of nine sensory parameters using instrumental parameters. Principal component analysis of instrumental and sensory parameters illustrated relationships among parameters. It was shown that instrumental parameters could be used to supplement sensory evaluation of process cheese texture. Increasing emulsifying salt content increased firmness, springiness and chewiness and decreased adhesiveness, mouthcoating and mass formation. Increasing protein content resulted in increased fracture strain and stress and chewiness and decreased melting. Increasing moisture content increased cohesiveness and decreased firmness and chewiness. Copyright © 2007 Society of Chemical Industry