Use of an exopolysaccharide-producing strain of Streptococcus thermophilus in the manufacture of Mexican Panela cheese

An exopolysaccharide (EPS) producing strain of Streptococcus thermophilus was evaluated for the production of Panela cheese using two total solids milk (TSM) concentrations (12.5 and 17.5 g/100 mL). This ropy strain increased cheese yield; nevertheless, with 12.5 TSM the increment was higher than with 17.5 TSM. Analysis of cheese composition showed that with 12.5 TSM, the ropy strain increased moisture, but did not change the fat or non fat solids on dry weight basis (dwb), suggesting that the increment of the yield is only due to water retention. In 17.5 TSM cheeses the ropy strain caused an increase in the moisture and fat (dwb), suggesting that besides water retention, fat also contributed to the yield. The difference in yield increment could be explained by cheese composition: higher fat content creates a more hydrophobic environment, which would expel more water than the cheese with lower fat content. Electron microscopy showed EPS attached to the protein matrix of the cheeses. In 17.5 TSM cheeses EPS was observed around the milk fat globules (MFG), confirming that higher TSM causes EPS to bind the MFG besides binding the protein matrix, retaining fat within the cheese. Sensory evaluation demonstrated that ropy cheeses were softer and creamier.     

Improvement of texture and structure of reduced-fat Cheddar cheese by exopolysaccharide-producing lactococci

The objective of this study was to evaluate the effect of capsular and ropy exopolysaccharide (EPS)-producing strains of Lactococcus lactis ssp. cremoris on textural and microstructural attributes during ripening of 50%-reduced-fat Cheddar cheese. Cheeses were manufactured with added capsule- or ropy-forming strains individually or in combination. For comparison, reduced-fat cheese with or without lecithin added at 0.2% (wt/vol) to cheese milk and full-fat cheeses were made using EPS-nonproducing starter, and all cheeses were ripened at 7°C for 6 mo. Exopolysaccharide-producing strains increased cheese moisture retention by 3.6 to 4.8% and cheese yield by 0.28 to 1.19 kg/100 kg compared with control cheese, whereas lecithin-containing cheese retained 1.4% higher moisture and had 0.37 kg/100 kg higher yield over the control cheese. Texture profile analyses for 0-d-old cheeses revealed that cheeses with EPS-producing strains had less firm, springy, and cohesive texture but were more brittle than control cheeses. However, these effects became less pronounced after 6 mo of ripening. Using transmission electron microscopy, fresh and aged cheeses with added EPS-producing strains showed a less compact protein matrix through which larger whey pockets were dispersed compared with control cheese. The numerical analysis of transmission electron microscopy images showed that the area in the cheese matrix occupied by protein was smaller in cheeses with added EPS-producing strains than in control cheese. On the other hand, lecithin had little impact on both cheese texture and microstructure; after 6 mo, cheese containing lecithin showed a texture profile very close to that of control reduced-fat cheese. The protein-occupied area in the cheese matrix did not appear to be significantly affected by lecithin addition. Exopolysaccharide-producing strains could contribute to the modification of cheese texture and microstructure and thus modify the functional properties of reduced-fat Cheddar cheese.     

Application of exopolysaccharide-producing cultures in reduced-fat Cheddar cheese: texture and melting properties

Textural, melting, and sensory characteristics of reduced-fat Cheddar cheeses made with exopolysaccharide (EPS)-producing and nonproducing cultures were monitored during ripening. Hardness, gumminess, springiness, and chewiness significantly increased in the cheeses as fat content decreased. Cheese made with EPS-producing cultures was the least affected by fat reduction. No differences in hardness, springiness, and chewiness were found between young reduced fat cheese made with a ropy Lactococcus lactis ssp. cremoris [JFR1; the culture that produced reduced-fat cheese with moisture in the nonfat substance (MNFS) similar to that in its full-fat counterpart] and its full-fat counterpart. Whereas hardness of full-fat cheese and reduced-fat cheese made with JFR1 increased during ripening, a significant decrease in its value was observed in all other cheeses. After 6 mo of ripening, reduced fat cheeses made with all EPS-producing cultures maintained lower values of all texture profile analysis parameters than did those made with no EPS. Fat reduction decreased cheese meltability. However, no differences in meltability were found between the young full-fat cheese and the reduced-fat cheese made with the ropy culture JFR1. Both the aged full- and reduced-fat cheeses made with JFR1 had similar melting patterns. When heated, they both became soft and creamy without losing shape, whereas reduced-fat cheese made with no EPS ran and separated into greasy solids and liquid. No differences were detected by panelists between the textures of the full-fat cheese and reduced-fat cheese made with JFR1, both of which were less rubbery or firm, curdy, and crumbly than all other reduced-fat cheeses.     

Application of exopolysaccharide-producing cultures in reduced-fat Cheddar cheese: composition and proteolysis

Proteolysis during ripening of reduced fat Cheddar cheeses made with different exopolysaccharide (EPS)-producing and nonproducing cultures was studied. A ropy strain of Lactococcus lactis ssp. cremoris (JFR1) and capsule-forming nonropy and moderately ropy strains of Streptococcus thermophilus were used in making reduced-fat Cheddar cheese. Commercial Cheddar starter was used in making full-fat cheese. Results showed that the actual yield of cheese made with JFR1 was higher than that of all other reduced-fat cheeses. Cheese made with JFR1 contained higher moisture, moisture in the nonfat substance, and residual coagulant activity than all other reduced-fat cheeses. Proteolysis, as determined by PAGE and the level of water-soluble nitrogen, was also higher in cheese made with JFR1 than in all other cheeses. The HPLC analysis showed a significant increase in hydrophobic peptides (causing bitterness) during storage of cheese made with JFR1. Cheese made with the capsule-forming nonropy adjunct of S. thermophilus, which contained lower moisture and moisture in the nonfat substance levels and lower chymosin activity than did cheese made with JFR1, accumulated less hydrophobic peptides. In conclusion, some EPS-producing cultures produced reduced-fat Cheddar cheese with moisture in the nonfat substance similar to that in its full-fat counterpart without the need for modifying the standard cheese-making protocol. Such cultures might accumulate hydrophobic (bitter) peptides if they do not contain the system able to hydrolyze them. For making high quality reduced-fat Cheddar cheese, EPS-producing cultures should be used in conjunction with debittering strains.     

Application of ruthenium red and colloidal gold-labeled lectin for the visualization of bacterial exopolysaccharides in Cheddar cheese matrix using transmission electron microscopy

The objective of the present study was to develop a methodology for direct observation of capsular and ropy strains and their exopolysaccharides (EPS) in a Cheddar cheese matrix. Cheddar cheeses with 50% reduced fat were made from milk containing 1.7% fat using mixed starter culture containing either capsule-forming Lactococcus lactis subsp. cremoris (SMQ-461) or ropy L. lactis subsp. cremoris (JRF-1) strains. Control cheese was made using the EPS-negative L. lactis subsp. cremoris (RBL132) strain. Following cheese pressing, samples were taken from each cheese treatment and examined by transmission electron microscopy (TEM). Samples were divided into two series: the first was prepared following the conventional methods (involving fixation, post fixation, dehydration and embedding in resin) and the second with added ruthenium red at 0.15% (w/v) during the fixation, post fixation and washing procedures. Gold-labeled lectin was also used for the visualization and localization of EPS in cheese matrix. Electron micrographs showed that ruthenium red makes it possible to visualize and enhance the resolution of the EPS in a Cheddar matrix compared with the conventional method. The EPS layer of the capsular strain appeared regular and evenly distributed around the cell, whereas the cell-associated EPS layer produced by the ropy strain was longer, more irregular (having a filamentous structure) and unevenly surrounded the cell. EPS released from the ropy strain appeared to form a network-like structure located principally in whey pockets and appeared to interact with the casein matrix and fat globule membrane. Labeling EPS by lectin conjugated to colloidal gold could only be performed with conventional preparation of cheese samples and appeared to react only with the cell surface rather than with liberated EPS. Besides their ability to bind water and increase cheese yield, capsular and ropy strains used in this study appear to have potential autolytic characteristics, which may have an impact on cheese proteolysis, texture and flavor quality.     

Influence of capsular and ropy exopolysaccharide-producing Streptococcus thermophilus on Mozzarella cheese and cheese whey

We investigated the effect of capsular and ropy exopolysaccharide-producing Streptococcus thermophilus starter bacteria on Mozzarella cheese functionality and whey viscosity. Mozzarella cheeses were manufactured with Lactobacillus helveticus LH100 paired with one of four S. thermophilus strains: MR-1C, a bacterium that produces a capsular exopolysaccharide; MTC360, a strain that secretes a ropy exopolysaccharide; TAO61, a nonexopolysaccharide-producing commercial cheese starter; and DM10, a nonencapsulated, exopolysaccharide-negative mutant of strain MR-1C. As expected, cheese moisture levels were significantly higher in Mozzarella cheeses made with exopolysaccharide-positive versus exopolysaccharide-negative streptococci, and melt properties were better in the higher moisture cheeses. Whey viscosity measurements showed that unconcentrated and ultrafiltered, fivefold concentrated whey from cheeses made with S. thermophilus MTC360 were significantly more viscous than whey from cheeses made with MR-1C, TAO61, or DM10. No significant differences were noted between the viscosity of unconcentrated or concentrated whey from cheeses made with S. thermophilus MR-1C versus the industrial cheese starter TAO61. These data indicate that encapsulated, but not ropy, exopolysaccharide-producing S. thermophilus strains can be utilized to increase the moisture level of cheese and to improve the melt properties of Mozzarella cheese without adversely affecting whey viscosity.     

Proteolysis texture and microstructure of low‐fat Tulum cheese affected by exopolysaccharide‐producing cultures during ripening

The objective of the study was to determine the effects of exopolysaccharide (EPS)‐producing or non‐EPS‐producing starters on proteolysis, physical and microstructural characteristics of full‐fat or low‐fat Tulum cheeses during ripening. For this purpose, Tulum cheese was manufactured using full‐ or low‐fat milk with EPS‐producing and non‐EPS‐producing starter cultures. Chemical composition, proteolysis, texture profiles and microstructure of the cheeses were studied during 90 days of ripening. Urea‐PAGE of water‐insoluble and RP‐HPLC peptide profiles of water‐soluble fractions of the cheeses showed that the use of starters resulted in different degradation patterns in all cheeses during ripening. Although β‐casein exhibited similar degradation patterns in all cheeses, small differences are present in α_s1‐casein degradation during ripening. Reducing fat in Tulum cheese changed the RP‐HPLC peptide profile of the cheeses. The use of EPS‐producing cultures improved the textural characteristics and changed the microstructure and proteolysis of low‐fat Tulum cheese.     

The effect of using an exopolysaccharide‐producing culture on the physicochemical properties of low‐fat and reduced‐fat Kasar cheeses

A mixed starter culture containing exopolysaccharide (EPS)‐producing strains of Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus was combined with Lactobacillus helveticus LH301 and used in the manufacture of low‐fat and reduced‐fat Kasar cheeses. For comparison, low‐fat (C10) and reduced‐fat (C20) cheeses were made using EPS‐producing (EPS⁺) starter strain and EPS‐non‐producing (EPS^?) starter strain. The physicochemical properties of the cheeses were assessed in terms of chemical composition, texture, microstructure and microbial content over 90 days. Cheeses made with EPS‐producing culture (EPS10 and EPS20) had lower protein contents than control cheeses with 10% and 20% fat in dry basis (C10 and C20). Scanning electron microscopy images showed that using EPS‐producing culture resulted in a less compact protein matrix and sponge‐like structure in the cheese samples. In general, cheeses made using EPS‐producing culture had lower total viable counts. This could be related to the reduced survivability of EPS‐producing cells in the cheese matrix during ripening due to autolysis ability.     

Application of exopolysaccharide-producing cultures in reduced-fat Cheddar cheese: cryo-scanning electron microscopy observations

The microstructure of reduced- and full-fat Cheddar cheeses made with exopolysaccharide (EPS)-producing and nonproducing cultures was observed using cryo-scanning electron microscopy. Fully hydrated cheese samples were rapidly frozen in liquid nitrogen slush (−207°C) and observed in their frozen hydrated state without the need for fat extraction. Different EPS-producing cultures were used in making reduced-fat Cheddar cheese. Full-fat cheese was made with a commercial EPS-nonproducing starter culture. The cryo-scanning electron micrographs showed that fat globules in the fully hydrated cheese were surrounded by cavities. Serum channels and pores in the protein network were clearly observed. Young (1-wk-old) full-fat cheese contained wide and long fat serum channels, which were formed because of fat coalescence. Such channels were not observed in the reduced-fat cheese. Young reduced-fat cheese made with EPS-nonproducing cultures contained fewer and larger pores than did reduced-fat cheese made with a ropy strain of Lactococcus lactis ssp. cremoris (JFR1), which had higher moisture levels. A 3-dimensional network of EPS was observed in large pores in cheese made with JFR1. Major changes in the size and distribution of pores within the structure of the protein network were observed in all reduced-fat cheeses, except that made with JFR1, as they aged. Changes in porosity were less pronounced in both the full-fat and the reduced-fat cheeses made with JFR1.     

Assessing the yield,microstructure, and texture properties of miniature Chihuahua-type cheese manufactured with a phospholipase A1 and exopolysaccharide-producing bacteria

Chihuahua cheese or Mennonite cheese is one of the most popular and consumed cheeses in Mexico and by the Hispanic community in the United States. According to local producers the yield of Chihuahua cheese ranges from 9 to 9.5 kg of cheese from 100 kg of milk. Cheese yield is a crucial determinant of profitability in cheese-manufacturing plants; therefore, different methods have been developed to increase it. In this work, a miniature Chihuahua-type cheese model was used to assess the effect of a phospholipase A₁ (PL-A₁) and exopolysaccharide (EPS)-producing bacteria (separately and in combination) on the yield, microstructure, and texture of cheese. Four different cheeses were manufactured: cheese made with PL-A₁, cheese made with EPS-producing bacteria, cheese with both PL-A₁ and EPS-producing bacteria, and a cheese control without PL-A₁ or EPS-producing bacteria. The compositional analysis of cheese was carried out using methods of AOAC International (Washington, DC). The actual yield and moisture-adjusted yield were calculated for all cheese treatments. Texture profile analyses of cheeses were performed using a texture analyzer. Micrographs were obtained by electron scanning microscopy. Fifty panelists carried out sensorial analysis using ranking tests. Incorporation of EPS-producing bacteria in the manufacture of cheese increased the moisture content and water activity. In contrast, the addition of PL-A₁ did not increase fat retention or cheese yield. The use of EPS alone improved the cheese yield by increasing water and fat retention, but also caused a negative effect on the texture and flavor of Chihuahua cheese. The use of EPS-producing bacteria in combination with PL-A₁ improved the cheese yield and increased the moisture and fat content. The cheeses with the best flavor and texture were those manufactured with PL-A₁ and the cheeses manufactured with the combination of PL-A1 and EPS-producing culture.     

乳酸菌胞外多糖对低脂Mozzarella奶酪质构、微观结构等品质的影响

目的 研究乳酸菌胞外多糖对低脂Mozzarella奶酪质构等品质特性的影响。方法 在脱除50%乳脂肪的原料中加入0.5%乳酸菌胞外多糖制作低脂Mozzarella奶酪, 同时以全脂Mozzarella奶酪和低脂Mozzarella奶酪为对照, 对Mozzarella奶酪成熟过程中的硬度、弹性、胶黏性、咀嚼性、融化性、油脂析出性、微观结构及感官评分等指标进行分析。结果 0.5%乳酸菌胞外多糖提高了低脂Mozzarella奶酪的水分含量、出品率, 改善了低脂Mozzarella奶酪致密的结构, 形成了类似全脂Mozzarella奶酪疏松、光滑的组织结构, 降低了低脂Mozzarella奶酪的硬度、胶黏性和咀嚼性, 提高了弹性、融化化性和油脂析出, 成熟90 d加入多糖低脂Mozzarella奶酪的滋味和气味、组织状态、色泽接近全脂Mozzarella奶酪。结论 乳酸菌胞外多糖可以提高低脂Mozzarella奶酪的水分含量和出品率, 改善低脂Mozzarella奶酪的组织结构和质构特性。     

Effect of Carrageenan on Physicochemical and Functional Properties of Low‐Fat Colby Cheese

The effect of carrageenan (κ‐carrageenan, ι‐carrageenan, and λ‐carrageenan) on the physiochemical and functional properties of low‐fat Colby cheese during ripening was investigated. Protein, fat, and moisture contents; the soluble fractions of the total nitrogen at pH 4.6; protein and fat recovery; and the actual yield and dry matter yield (DM yield) were monitored. Hardness, springiness, and the storage modulus were also evaluated to assess the functional properties of the cheese. Moreover, the behavior of water in the samples was investigated to ascertain the underlying mechanisms. The results indicated that 0.15 g/kg κ‐carrageenan had no significant effect on the actual yield and DM yield, and physiochemical and functional properties of low‐fat Colby cheese. The protein content increased in the low‐fat cheese and low‐fat cheese containing κ‐carrageenan, and the moisture in the nonfat substance (MNFS) decreased in both samples, which contributed to the harder texture. The addition of 0.3 g/kg ι‐carrageenan and 0.3 g/kg λ‐carrageenan improved the textural and rheological properties of low‐fat cheese by 2 ways: one is increasing the content of bound and expressible moisture due to their high water absorption capacity and the other is interfering with casein crosslinking, thereby further increasing MNFS and the actual yield.     

Impact of ropy and capsular exopolysaccharide-producing strains of Lactococcus lactis subsp. cremoris on reduced-fat Cheddar cheese production and whey composition

Cheddar cheese mixed starter cultures containing exopolysaccharide (EPS)-producing strains of Lactococcus lactis subsp. cremoris (Lac. cremoris) were characterized and used for the production of reduced-fat Cheddar cheese (15% fat). The effects of ropy and capsular strains and their combination on cheese production and physical characteristics as well as composition of the resultant whey samples were investigated and compared with the impact of adding 0.2% (w/v) of lecithin, as a thickening agent, to cheese milk. Control cheese was made using EPS-non-producing Lac. cremoris. Cheeses made with capsular or ropy strains or their combination retained 3.6–4.8% more moisture and resulted in 0.29–1.19 kg/100 kg higher yield than control cheese. Lecithin also increased the moisture retention and cheese yield by 1.4% and 0.37%, respectively, over the control cheese. Lecithin addition also substantially increased viscosity, total solid content and concentrating time by ultra-filtration (UF) of the whey produced. Compared with lecithin addition, the application of EPS-producing strains increased the viscosity of the resultant whey slightly, while decreasing whey total solids, and prolonging the time required to concentrate whey samples by UF. The amount of EPS expelled in whey ranged from 31 to 53 mg L⁻¹. Retention of EPS-producing strains in cheese curd was remarkably higher than that of non-producing strains. These results indicate the capacity of EPS-producing Lac. cremoris for enhanced moisture retention in reduced-fat Cheddar cheese; these strains would be a promising alternative to commercial stabilizers.     

Influence of fat replacers on chemical composition, proteolysis, texture profiles, meltability and sensory properties of low-fat Kashar cheese

Changes in chemical composition, proteolysis, lipolysis, texture, melting and sensory properties of low-fat Kashar cheese made with three different fat replacers (Simplesse D-100, Avicel Plus CM 2159 or beta-glucan) were investigated throughout ripening. The low-fat cheeses made with fat replacers were compared with full- and low-fat counterparts as controls. Reduction of fat caused increases in moisture and protein contents and decreases in moisture-in-non fat substance and yield values in low-fat cheeses. The use of fat replacers in the manufacture of low-fat Kashar cheese increased water binding capacity and improved overall quality of the cheeses. Use of fat replacer in low-fat cheese making has enhanced cheese proteolysis. All samples underwent lipolysis during ripening and low-fat cheeses with fat replacers had higher level of total free fatty acid than full- or low-fat control cheeses. Texture attributes and meltability significantly increased with addition of fat replacers. Sensory scores showed that the full-fat cheese was awarded best in all stages of ripening and low-fat variant of Kashar cheeses have inferior quality. However, fat replacers except beta-glucan improved the appearance, texture and flavour attributes of low-fat cheeses. When the fat replacers are compared, the low-fat cheese with Avicel Plus CM 2159 was highly acceptable and had sensory attributes closest to full-fat Kashar cheese.     

Texture characteristics and pizza bake properties of low-fat Mozzarella cheese as influenced by pre-acidification with citric acid and use of encapsulated and ropy exopolysaccharide producing cultures

Low-fat Mozzarella cheeses containing 6% fat were made by pre-acidification of milk with citric acid to pH 6.1 and using encapsulated ropy or non-ropy exopolysaccharide (EPS) producing Streptococcus thermophilus. Moisture retention, changes in texture profile analysis (TPA), meltability and stretchability of cheese, and changes in colour, surface scorching and shred fusion were analysed after baking over 90 days (d). Control cheeses and those made from pre-acidified milk without EPS cultures had the lowest moisture content at 54.84% and 55.28%, respectively. Control cheeses were hardest and their meltability and stretchability were initially low. Hardness was reduced and the melt and stretch distances increased with time. When baked, control cheeses showed incomplete shred fusion. Pre-acidification reduced hardness and increased meltability. Capsular- and ropy-EPS were quantified at 30.42 and 30.55 mg g⁻¹ of cheese, respectively, and increased moisture retention in pre-acidified cheese to 56.67% and 56.21%, respectively. These cheeses were softer and exhibited lower springiness. Greater meltability was observed initially but became similar to control cheeses after 90 d of storage. When baked after 45 d of storage, cheeses containing EPS producing cultures showed improved shred fusion, meltability and a reduction in surface scorching.     

瑞士乳杆菌对契达干酪成熟期间品质的影响

干酪的成熟是形成干酪特有的组织状态、质地和风味的关键工序。将分离自内蒙古传统乳制品中的瑞士乳杆菌SMN2-1作为非发酵性乳酸菌添加到契达干酪的生产中,通过检测其成熟过程中理化指标、气味变化和质构特性等指标,分析了瑞士乳杆菌对契达干酪成熟的影响。结果显示:在90 d的成熟期内,两组干酪的蛋白质、脂肪、水分和盐分含量之间差异不显著(p>0.05),但添加瑞士乳杆菌SMN2-1的干酪成熟第90 d的气味明显改变,内聚性、弹性和咀嚼性等物性指标均高于对照,因此添加瑞士乳杆菌SMN2-1可以有效促进蛋白质分解和干酪的成熟,同时改善干酪的风味和质地。     

INSTRUMENTAL TEXTURE OF SET AND STIRRED FERMENTED MILK. EFFECT OF A ROPY STRAIN OF LACTOBACILLUS DELBRUECKII SUBSP. BULGARICUS AND AN ENRICHED SUBSTRATE

Texture profile analysis (TPA) of stirred and set cultured milk were evaluated, using an exopolysaccharide producing strain of Lactobacillus delbrueckii subsp. bulgaricus (NCFB 2772) and a protein enriched substrate (retentate). In both cases, samples were compared respectively with a nonropy strain (NCFB 1489) and reconstituted skim milk substrate. The retentate fermented products were firmer in comparison with skim milk products, both at 10% of total solids. A loss of structure occurred when the retentate products were stirred causing a nine-fold decrease in hardness, whereas in cultured milk products the loss was of around three-fold. The main differences were found in adhesiveness and fracture characteristics. Set retentate ropy product was five times more adhesive than the nonropy one, whereas in stirred retentate and set skim milk products the difference was two-fold. No differences in adhesiveness were detected when skim milk products were stirred using either strain. The fracture force on ropy retentate samples increased after fracture while the nonropy ones showed a decrease, implying more structural breakdown in the latter. On set products, cohesiveness increased slightly due to the ropy strain. Changes in texture observed between ropy and nonropy strains can be attributed to exopolysaccharide attachment to the casein matrix being increased when the protein content is higher.     

MILK GEL STRUCTURE. X. TEXTURE AND MICROSTRUCTURE IN CHEDDAR CHEESE MADE FROM WHOLE MILK AND FROM HOMOGENIZED LOW-FAT MILK1

Reduced-fat cheese (17% fat, 44% moisture) was considerably firmer and more elastic than full-fat cheese (35% fat, 35% moisture), even though the moisture levels in the nonfat matter (MNFM) of the cheese were the same, at 54%. Electron microscopy and compositional analysis revealed about 30% more protein matrix in the reduced-fat cheese. Apparently more of this matrix must be cut or deformed in sensorial and texture assessments. A practical implication is that MNFM should be slightly higher in the reduced-fat cheese than in full-fat cheese to achieve more similar texture. Homogenization of milk tended to increase the moisture content and decrease firmness and elasticity, but not markedly. The smaller fat globules, per se, did not apparently affect texture as measured in these experiments. Curd granule junctions were prominent in nonhomogenized-milk cheese, because large fat globules were lost at the granule surfaces leaving protein-dense junctions; those in homogenized-milk cheese were less apparent because the protein-dense areas, which resulted from the loss of small fat globules, were narrower. Sensory and textural parameters for firmness and elasticity were inter-correlated. The Bite Test was more useful than Instron measurements of deformation (20%), apparently because the latter was markedly affected by a slight openness in the cheese.     

Microstructural changes in fat during the ripening of Iranian ultrafiltered Feta cheese

In this study, fat globules in Iranian ultrafiltered Feta cheese (3 to 60 d) were directly observed during the ripening period by scanning electron microscopy. According to images of ultrafiltered Feta cheese samples obtained by scanning electron microscopy, individual fat globules and aggregates of fat were easily distinguishable on d 3 and had completely disappeared within 20 d of storage. On d 20, only the fingerprints of the fat globules and pools of free fat in the casein matrix remained. After 40 d of ripening, the texture was homogeneous and no fat globules or fat voids were detected. Chemical analysis of cheese samples showed that with an increase in the ripening period, the contents of dry matter and fat decreased significantly, whereas the pH values and salt content did not indicate any significant changes.     

Application of salt whey in process cheese food made from Cheddar cheese containing exopolysaccharides

The objective of this work was to use salt whey in making process cheese food (PCF) from young (3-wk-old) Cheddar cheese. To maximize the level of salt whey in process cheese, low salt (0.6%) Cheddar cheese was used. Because salt reduction causes undesirable physiochemical changes during extended cheese ripening, young Cheddar cheese was used in making process cheese. An exopolysaccharide (EPS)-producing strain (JFR) and a non-EPS-producing culture (DVS) were applied in making Cheddar cheese. To obtain similar composition and pH in the EPS-positive and EPS-negative Cheddar cheeses, the cheese making protocol was modified in the latter cheese to increase its moisture content. No differences were seen in the proteolysis between EPS-positive and EPS-negative Cheddar cheeses. Cheddar cheese made with the EPS-producing strain was softer, and less gummy and chewy than that made with the EPS-negative culture. Three-week-old Cheddar cheese was shredded and stored frozen until used for PCF manufacture. Composition of Cheddar cheese was determined and used to formulate the corresponding PCF (EPS-positive PCF and EPS-negative PCF). The utilization of low salt Cheddar cheese allowed up to 13% of salt whey containing 9.1% salt to be used in process cheese making. The preblend was mixed in the rapid visco analyzer at 1,000 rpm and heated at 95°C for 3 min; then, the process cheese was transferred into copper cylinders, sealed, and kept at 4°C. Process cheese foods contained 43.28% moisture, 23.7% fat, 18.9% protein, and 2% salt. No difference in composition was seen between the EPS-positive and EPS-negative PCF. The texture profile analysis showed that EPS-positive PCF was softer, and less gummy and chewy than EPS-negative PCF. The end apparent viscosity and meltability were higher in EPS-positive PCF than in EPS-negative PCF, whereas emulsification time was shorter in the former cheese. Sensory evaluation indicated that salt whey at the level used in this study did not affect cheese flavor. In conclusion, process cheese, containing almost 13% salt whey, with improved textural and melting properties could be made from young EPS-positive Cheddar cheese.