Scalable Multicasting: The Core-Assisted Mesh Protocol

Most of the multicast routing protocols for ad hoc networks today are based on shared or source-based trees; however, keeping a routing tree connected for the purpose of data forwarding may lead to a substantial network overhead. A different approach to multicast routing consists of building a shared mesh for each multicast group. In multicast meshes, data packets can be accepted from any router, as opposed to trees where data packets are only accepted from routers with whom a tree branch has been established. The difference among multicast routing protocols based on meshes is in the method used to build these structures. Some mesh-based protocols require the flooding of sender or receiver announcements over the whole network. This paper presents the Core-Assisted Mesh Protocol, which uses meshes for data forwarding, and avoids flooding by generalizing the notion of core-based trees introduced for internet multicasting. Group members form the mesh of a group by sending join requests to a set of cores. Simulation experiments show that meshes can be used effectively as multicast routing structures without the need for flooding control packets.     

Scalable location guide overlay multicast in mobile ad hoc networks using tree partition scheme

Nodes mobility brings flinty challenges to multicast in Mobile ad hoc Networks (MANETs). To track nodes mobility, flooding messages are widely used for data delivery structure construction and maintenance in many multicast protocols. These periodic flooding messages significantly consume network resources, such as energy and bandwidth, and result in network collisions. To release data delivery structure maintenance onus, profited from GPS location service, a number of stateless location based multicast protocol were proposed, where a destination list is encapsulated into each data packet for data packet orientation. However, due to data packet capability limitation, the way of encapsulating a destination list in each data packet header restricts the protocol scalability. To solve the scalability issue of multicast protocols, we propose a Scalable Location Guide Overlay Multicast (SLGOM) for MANETs. Analysis and simulation results show that SLGOM achieves high performance in large multicast group and significantly improves the scalability of stateless multicast with respect to group size. Copyright © 2010 John Wiley & Sons, Ltd.     

一种适用于动态/移动环境的新的组播协议

组播协议由于能够有效的利用网络带宽并降低服务器的负担因而受到广泛的关注.其中的共享树组播协议由于具有良好的扩展性而得到更多的支持,然而目前的共享树组播协议在动态移动环境中的性能很差,一些改进协议(单核移动协议)虽然可以很好的提高原有协议的性能但是所需要的额外开销很大.针对这种情况,本文提出了一种新的共享树组播协议-动态多核协议,该协议能够根据组播成员的分布动态的渐进的调整组播树的形状,从而能够在低开销的情况下为移动用户提供良好的性能.计算机仿真和数学分析都表明动态多核协议要明显优于共享树组播协议和单核移动协议.     

Dynamic agent-based hierarchical multicast for wireless mesh networks

We propose and analyze a multicast algorithm named Dynamic Agent-based Hierarchical Multicast (DAHM) for wireless mesh networks that supports user mobility and dynamic group membership. The objective of DAHM is to minimize the overall network cost incurred. DAHM dynamically selects multicast routers serving as multicast agents for integrated mobility and multicast service management, effectively combining backbone multicast routing and local unicast routing into an integrated algorithm. As the name suggests, DAHM employs a two-level hierarchical multicast structure. At the upper level is a backbone multicast tree consisting of mesh routers with multicast agents being the leaves. At the lower level, each multicast agent services those multicast group members within its service region. A multicast group member changes its multicast agent when it moves out of the service region of the current multicast agent. The optimal service region size of a multicast agent is a critical system parameter. We propose a model-based approach to dynamically determine the optimal service region size that achieves network cost minimization. Through a comparative performance study, we show that DAHM significantly outperforms two existing baseline multicast algorithms based on multicast tree structures with dynamic updates upon member movement and group membership changes.     

动态QoS多播路由协议

本文主要研讨了具有QoS约束的动态多播路由问题.文中描述了一种适用于QoS多播路由的网络模型,提出了一种动态QoS多播路由协议(DQMRP),该协议能操作在单播路由协议的顶层,它只要求网络链路(或节点)的局部状态信息,不需要维护全局状态信息.DQMRP可有效地减少构造一棵多播树的开销,多播组成员可动态地加入／退出多播会晤.该协议可搜索多条可行树枝,并能选择一条最优(或近优)树枝将新成员连接到多播树.文中给出了DQMRP的正确性证明和复杂性分析,并通过仿真实验验证了该协议的可用性和有效性.     

Power aware scalable multicast routing protocol for MANETs

Multicasting is an effective way to provide group communication. In mobile ad hoc networks (MANETs), multicasting can support a wide variety of applications that are characterized by a close degree of collaboration. Since MANETs exhibit severe resource constraints such as battery power, limited bandwidth, dynamic network topology and lack of centralized administration, multicasting in MANETs become complex. The existing multicast routing protocols concentrate more on quality of service parameters like end‐to‐end delay, jitter, bandwidth and power. They do not stress on the scalability factor of the multicast. In this paper, we address the problem of multicast scalability and propose an efficient scalable multicast routing protocol called ‘Power Aware Scalable Multicast Routing Protocol (PASMRP)’ for MANETs. PASMRP uses the concept of class of service with three priority levels and local re‐routing to provide scalability. The protocol also ensures fair utilization of the resources among the nodes through re‐routing and hence the lifetime of the network is increased. The protocol has been simulated and the results show that PASMRP has better scalability and enhanced lifetime than the existing multicast routing protocols. Copyright © 2005 John Wiley & Sons, Ltd.     

An efficient mesh‐based multicast routing protocol in mobile ad hoc networks

Mesh‐based multicast routing protocols for mobile ad hoc networks (MANETs) build multiple paths from senders to receivers to deliver packets even in the presence of links breaking. This redundancy results in high reliability/robustness but may significantly increase packet overhead. This paper proposes a mesh‐based multicast protocol, called centered protocol for unified multicasting through announcements (CPUMA), that achieves comparable reliability as existing mesh‐based multicast protocols, however, with significantly much less data overhead. In CPUMA, a distributed core‐selection and maintenance algorithm is used to find the source‐centric center of a shared mesh. We leverage data packets to center the core of each multicast group shared mesh instead of using GPS or any pre‐assignment of cores to groups (the case of existing protocols). The proposed centering scheme allows reducing data packet overhead and creating forwarding paths toward the nearest mesh member instead of the core to reduce latency. We show, via simulations, that CPUMA outperforms existing multicast protocols in terms of data packet overhead, and latency while maintaining a constant or better packet delivery ratio, at the cost of a small increase in control overhead in a few scenarios. Copyright © 2010 John Wiley & Sons, Ltd.     

Exploring mesh and tree-based multicast. Routing protocols for MANETs

Recently, it became apparent that group-oriented services are one of the primary application classes targeted by MANETs. As a result, several MANET-specific multicast routing protocols have been proposed. Although these protocols perform well under specific mobility scenarios, traffic loads, and network conditions, no single protocol has been shown to be optimal in all scenarios. The goal of this paper is to characterize the performance of multicast protocols over a wide range of MANET scenarios. To this end, we evaluate the performance of mesh and tree-based multicast routing schemes relative to flooding and recommend protocols most suitable for specific MANET scenarios. Based on the analysis and simulation results, we also propose two variations of flooding, scoped flooding and hyper flooding, as a means to reduce overhead and increase reliability, respectively. Another contribution of the paper is a simulation-based comparative study of the proposed flooding variations against plain flooding, mesh, and tree-based MANET routing. In our simulations, in addition to "synthetic" scenarios, we also used more realistic MANET settings, such as conferencing and emergency response.     

Multi-Constrained Dynamic QoS Multicast Routing Design Using Ant Colony System

1IntroductionThe objective of Dynamic QoS Multicast Routing(DQMR) is to find the opti mal routing trees in the fu-ture real-ti me communication network, where informa-tion or messages are sent fromthe source nodeto all des-tination nodes , while meeting all QoS requirements forevery admitted connection and achieving global efficien-cy in resource utilization. Different applications haverather diverse QoS constraints on bandwidth, delay,delayjitter and so on. Multiple constraints often mak…     

Exploring Performance of Hypercube Structure for Multicast in Mobile Ad Hoc Networks

Performance of multicast routing protocol in mobile ad hoc networks is mostly characterized by underlying forwarding structure. Currently, general structures based on tree/mesh based scheme cannot handle with transmission efficiency, robustness to dynamic topology, scalability, and load balancing functionalities at the same time. To handle above key performance factors concurrently, we propose a new virtual backbone architecture for multicast, which is based on hierarchical hypercube structure. Due to the natural properties of hypercube structure, we can achieve efficiency, robustness and load balance in mobile ad hoc networks where links are frequently broken owing to nodes’ free immigration. Furthermore, scalability problem is naturally resolved by hierarchical structure. Finally, through simulation results, we have proven good scalability by demonstrating that our structure can provide higher packet delivery ratio with low control overhead and better scalability than tree/mesh based scheme without regard to the number of group members.     

Dynamic Host-Group/Multi-Destination Routing for Multicast Sessions

Multicast routing research efforts have mostly focused on supporting the host-group model in which multicast packets are addressed to a host (or multicast) group. Another multicast routing approach uses multi-destination addressing, where a multicast packet carries a list of the unique (unicast) addresses of all the group members. This form of routing can be accomplished using limited or no additional state beyond the existing unicast routing tables. It, therefore, scales well with the number of multicast sessions but does not scale well with the size of the multicast group and, in fact, requires the size of the multicast group to be below a certain threshold. In this paper, we envision a future scenario in which both host-group and multi-destination addressing routing approaches coexist within the Internet. We develop a dynamic routing context for this future scenario wherein a multicast session can adapt among different routing configurations depending on the number of multicast group members and how this number changes over time. We consider three routing options: (1) A single multi-destination addressed flow – suitable for small-group sessions, (2) multiple multi-destination addressed flows – suitable for medium-group sessions and (3) a single host-group addressed flow – suitable for large-group sessions. For multicast sessions that vary in group membership over time, different routing protocols may be best at different points in time. Our work is concerned with the development and evaluation of protocols that allow a multicast session to dynamically switch among these three routing options as the size of the session changes.     

Wireless Ad Hoc Multicast Routing with Mobility Prediction

An ad hoc wireless network is an infrastructureless network composed of mobile hosts. The primary concerns in ad hoc networks are bandwidth limitations and unpredictable topology changes. Thus, efficient utilization of routing packets and immediate recovery of route breaks are critical in routing and multicasting protocols. A multicast scheme, On-Demand Multicast Routing Protocol (ODMRP), has been recently proposed for mobile ad hoc networks. ODMRP is a reactive (on-demand) protocol that delivers packets to destination(s) on a mesh topology using scoped flooding of data. We can apply a number of enhancements to improve the performance of ODMRP. In this paper, we propose a mobility prediction scheme to help select stable routes and to perform rerouting in anticipation of topology changes. We also introduce techniques to improve transmission reliability and eliminate route acquisition latency. The impact of our improvements is evaluated via simulation.     

A scalable multicast routing protocol for building shortest path trees

Scalability is a great concern in the design of multicast routing protocols for the global Internet. Building shortest path trees (SPT) is currently one of the most widely used approaches to supporting multicast routing because of the simplicity and low per‐destination cost of such trees. However, the construction of an SPT typically involves high protocol overhead, which leads to the scalability problem as the number of concurrent multicast sessions increases. In this paper, we present a destination‐initiated shortest path tree (DSPT) routing protocol. The design objective is to effectively reduce the protocol overhead associated with SPT constructions for providing scalable multicast. To achieve this objective, we introduce destination‐initiated joining operations in constructing SPTs. With DSPT, each router receiving a request to join a specific multicast group makes a local decision on selecting its parent node through which it connects to the existing tree. A source‐rooted SPT is built as a result of such collaborative operations at nodes. DSPT requires only limited routing information at routers. Analytical results demonstrate that DSPT scales well with respect to computation, storage and communication overhead when the number of concurrent multicast requests is large. Simulation experiments are also conducted to verify the correctness of the theoretically deduced analytical results. Copyright © 2006 John Wiley & Sons, Ltd.     

多媒体通信的成组多点广播路由算法

多点广播是一源点传送信息到多个目的节点,成组多点广播是一组节点内部互相进行多点广播。成组多点广播的路由算法是为组内的每一个节点建立一棵路由树,用于点到多点的广播通信。本文提出一种新的成组广播路由算法,它比传统的成组广播路由算法在性能上有了一定的提高,同时更为简洁。     

Analysis of tree‐based multicast routing in wireless sensor networks with varying network metrics

Wireless ad hoc and sensor networks are emerging with advances in electronic device technology, wireless communications and mobile computing with flexible and adaptable features. Routing protocols act as an interface between the lower and higher layers of the network protocol stack. Depending on the size of target nodes, routing techniques are classified into unicast, multicast and broadcast protocols. In this article, we give analysis and performance evaluation of tree‐based multicast routing in wireless sensor networks with varying network metrics. Geographic multicast routing (GMR) and its variations are used extensively in sensor networks. Multicast routing protocols considered in the analytical model are GMR, distributed GMR, demand scalable GMR, hierarchical GMR, destination clustering GMR and sink‐initiated GMR. Simulations are given with comparative analysis based on varying network metrics such as multicast group size, number of sink nodes, average multicast latency, number of clusters, packet delivery ratio, energy cost ratio and link failure rate. Analytical results indicate that wireless sensor network multicast routing protocols operate on the node structure (such as hierarchical, clustered, distributed, dense and sparse networks) and application specific parameters. Simulations indicate that hierarchical GMR is used for generic multicast applications and that destination clustering GMR and demand scalable GMR are used for distributed multicast applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Performance evaluation of the MoM mobile multicast protocol

This paper presents a performance study of a mobile multicast protocol called MoM, which is designed to support IP multicast for mobile hosts in an IP internetwork. The protocol uses the basic unicast routing capability of IETF Mobile IP, and leverages existing IP multicast to provide multicast services for mobile hosts as well. A key feature of the MoM protocol is the use of designated multicast service providers (DMSPs) to improve the scalability of mobile multicast. Discrete-event simulation is used in the performance evaluation of the protocol. The performance study focuses on the scalability, routing efficiency, fairness, and overhead of the MoM protocol, as well as on DMSP selection policies and the deliverability of multicast messages. The simulation results suggest distinct performance advantages for the MoM protocol over other approaches for mobile multicast, such as bi-directional tunnelling, particularly as the number of mobile group members increases. Furthermore, even simple policies for choosing a DMSP from possible candidates provide reasonable tradeoffs between handoff rates, routing efficiency, deliverability of messages, and protocol overhead. This revised version was published online in June 2006 with corrections to the Cover Date.     

A ring-based multicast routing topology with QoS support in wireless mesh networks

Wireless mesh networking (WMN) is an emerging technology for future broadband wireless access. The proliferation of the mobile computing devices that are equipped with cameras and ad hoc communication mode creates the possibility of exchanging real-time data between mobile users in wireless mesh networks. In this paper, we argue for a ring-based multicast routing topology with support from infrastructure nodes for group communications in WMNs. We study the performance of multicast communication over a ring routing topology when 802.11 with RTS/CTS scheme is used at the MAC layer to enable reliable multicast services in WMNs. We propose an algorithm to enhance the IP multicast routing on the ring topology. We show that when mesh routers on a ring topology support group communications by employing our proposed algorithms, a significant performance enhancement is realized. We analytically compute the end-to-end delay on a ring multicast routing topology. Our results show that the end-to-end delay is reduced about 33 %, and the capacity of multicast network (i.e., maximum group size that the ring can serve with QoS guarantees) is increased about 50 % as compared to conventional schemes. We also use our analytical results to develop heuristic algorithms for constructing an efficient ring-based multicast routing topology with QoS guarantees. The proposed algorithms take into account all possible traffic interference when constructing the multicast ring topology. Thus, the constructed ring topology provides QoS guarantees for the multicast traffic and minimizes the cost of group communications in WMNs.     

基于布尔集线器的线速多播自路由交换结构

现有的组播交换结构均是从单播交换结构发展而来,而目前的各种单播交换结构都存在各自的技术瓶颈,当被应用于组播交换时,既不能突破原交换结构的技术局限,又限制了组播交换的性能,因此现有的组播交换结构基本都不具备大规模可扩展的能力。本文提出基于分配格理论的线速组播交换结构,它不仅能满足大规模可扩展和线速组播要求,而且具有低时延、无抖动,不需要排队缓存等性能优势。本文分析并证明了该组播交换结构既能实现最优化的组播,又支持具有优先级的组播,从而在时延上保证了组播QoS(quality of service)。     

An Efficient Multicast Routing Protocol in Wireless Mobile Networks

Providing multicast service to mobile hosts in wireless mobile networking environments is difficult due to frequent changes of mobile host location and group membership. If a conventional multicast routing protocol is used in wireless mobile networks, several problems may be experienced since existing multicast routing protocols assume static hosts when they construct the multicast delivery tree. To overcome the problems, several multicast routing protocols for mobile hosts have been proposed. Although the protocols solve several problems inherent in multicast routing proposals for static hosts, they still have problems such as non-optimal delivery path, datagram duplication, overheads resulting from frequent reconstruction of a multicast tree, etc. In this paper, we summarize these problems of multicast routing protocols and propose an efficient multicast routing protocol based on IEFT mobile IP in wireless mobile networks. The proposed protocol introduces a multicast agent, where a mobile host receives a tunneled multicast datagram from a multicast agent located in a network close to it or directly from the multicast router in the current network. While receiving a tunneled multicast datagram from a remote multicast agent, the local multicast agent may start multicast join process, which makes the multicast delivery route optimal. The proposed protocol reduces data delivery path length and decreases the amount of duplicate copies of multicast datagrams. We examined and compared the performance of the proposed protocol and existing protocols by simulation under various environments and we got an improved performance over the existing proposals.     

无线mesh网络中编码感知且负载均衡的组播路由

提出一种新的基于网络编码的负载均衡路由量度CRM-LB(coding-aware routing metric with load balancing),CRM-LB在CRM(coding-aware routing metric)的基础上增加了对路径p上所有节点通信密集程度与网络拥塞程度的考虑。进一步提出了基于CRM-LB的无线mesh网络多播路由CLR(coding and load-balancing routing)。该协议可以增加网络编码机会,同时考虑到网络中的负载均衡。通过性能分析和仿真实验表明,该协议在提高多播吞吐量的前提下,不仅能更好地支持网络编码,而且网络负载基本均衡。