The utilization of waste egg and cockle shell as catalysts for biodiesel production from food processing waste oil using stirring and ultrasonic agitation

The use of calcined egg and cockle shell as heterogeneous solid catalysts for a transesterification reaction to produce biodiesel from food processing waste has been investigated in this work. The CaO catalysts were obtained from the calcination of egg and cockle shell and were characterized by surface analysis, X-ray diffractometry (XRD), and scanning electron microscopy (SEM). The experiments employed stirring and ultrasonic agitation, which proved to be a time-efficient approach for biodiesel production from food processing waste oil. A response surface methodology (RSM) was used to evaluate the effects of the process variables methanol to oil molar ratio, catalyst concentration, and reaction time on biodiesel production. The optimal % fatty acid methyl ester values obtained when using egg and cockle shells as catalysts were found to be 94.7% and 94.4% when the methanol to oil molar ratios were 9.3:1 and 8.5:1, egg and cockle shell catalyst mass fraction percentages were 3.8% and 3.5%, and reaction times were 47 and 44 min, respectively. The study has shown that ultrasonic agitation might be employed in a practical pilot reactor for biodiesel production.     

Alkaline catalyzed biodiesel production from moringa oleifera oil with optimized production parameters

The utilization of non-edible feedstock such as moringa oleifera for biodiesel production attracts much attention owing to the issue with regards to avoiding a threat to food supplies. In this study, the optimization of biodiesel production parameters for moringa oleifera oil was carried out. The free fatty acid value of moringa oil was found to be 0.6%, rendering the one step alkaline transesterification method for converting moringa fatty acids to their methyl esters possible. The optimum production parameters: catalyst amount, alcohol amount, temperature, agitation speed and reaction time were determined experimentally and found to be: 1.0 wt% catalyst amount, 30 wt% methanol amount, 60 °C reaction temperature, 400 rpm agitation rate and 60 min reaction time. With these optimal conditions the conversion efficiency was 82%. The properties of the moringa biodiesel that was produced were observed to fall within the recommended international biodiesel standards. However, moringa biodiesel showed high values of cloud and pour points of 10 °C and 3 °C respectively, which present a problem as regards use in cold temperatures.     

Alkaline catalyzed biodiesel production from safflower (Carthamus tinctorius L.) oil: Optimization of parameters and determination of fuel properties

In this study, the process of biodiesel production from safflower oil was optimized using a single-stage alkaline catalyst (NaOH). The optimization process was carried out depending on parameters, such as catalyst concentration, methanol-oil ratio, reaction temperature, and reaction time. The optimum biodiesel conversion efficiency was obtained to be 93.4% at 0.5% catalyst concentration, 20% methanol-oil ratio, 60 min reaction time, and 60°C reaction temperature. The fuel properties of biodiesel obtained under optimal conditions were determined.     

Response surface analysis for optimisation of reaction parameters of biodiesel production from alcoholysis of Parinari polyandra seed oil

Availability of information on the efficiency of applied conditions to biodiesel synthesis from diverse seed oil can establish optimal biodiesel yield from favourable reaction variables. The effect of reaction parameters; temperature, time and catalyst amount, were varied on biodiesel yield from alcoholysis of Parinari polyandra oil using potassium hydroxide as catalyst. Maximum biodiesel yield of 95.62% was obtained from the experimental results. Analysis of Variance revealed that the reaction variables had significant effects on biodiesel yield. Data analysis predicted an optimal biodiesel yield of 92.75% at reaction conditions of 61.20°C temperature, 60 min, and 1?wt% of catalyst amount. Validation experiments of the optimal conditions gave an average biodiesel yield of 91.72%. The study established optimal conditions of temperature, time, and catalyst amount for biodiesel production from P. polyandra oil. The fuel properties of the biodiesel fell within the standards of the American Society for Testing and Materials D6751.     

Optimization of biodiesel production from camelina oil using orthogonal experiment

Camelina oil is a low-cost feedstock for biodiesel production that has received a great deal of attention in recent years. This paper describes an optimization study on the production of biodiesel from camelina seed oil using alkaline transesterification. The optimization was based on sixteen well-planned orthogonal experiments (OA₁₆ matrix). Four main process conditions in the transesterification reaction for obtaining the maximum biodiesel production yield (i.e. methanol quantity, reaction time, reaction temperature and catalyst concentration) were investigated. It was found that the order of significant factors for biodiesel production is catalyst concentration > reaction time > reaction temperature > methanol to oil ratio. Based on the results of the range analysis and analysis of variance (ANOVA), the maximum biodiesel yield was found at a molar ratio of methanol to oil of 8:1, a reaction time of 70 min, a reaction temperature of 50 °C, and a catalyst concentration of 1 wt.%. The product and FAME yields of biodiesel under optimal conditions reached 95.8% and 98.4%, respectively. The properties of the optimized biodiesel, including density, kinematic viscosity, acid value, etc., were determined and compared with those produced from other oil feedstocks. The optimized biodiesel from camelina oil meets the relevant ASTM D6571 and EN 14214 biodiesel standards and can be used as a qualified fuel for diesel engines.     

Production and evaluation of biodiesel from mixed castor oil and waste chicken oil

Biodiesel was developed from an unconventional feedstock, i.e. an equivalent blend of castor bean and waste chicken oil through the alkaline-catalyzed transesterification with methanol. The process variables including the alkaline catalyst concentration, methanol to oil molar ratio, reaction temperature, reaction time, and the alkaline catalyst type were investigated. The highest yield of biodiesel (97.20 % ~ 96.98 % w/w ester content) was obtained under optimum conditions of 0.75 % w/w of oil, 8:1 methanol to oil molar ratio, 60°C temperature, and a duration of 30 min. Properties of the produced biodiesel satisfied those specified by the ASTM standards. The results thus indicated that the suggested blend oils are suitable feedstock for the production of biodiesel. The process was found to follow pseudo first-order kinetics, and the activation energy was found to be 8.85 KJ/mole.     

Optimisation of base-catalysed transesterification of Simarouba glauca oil for biodiesel production

Biodiesel was prepared from the crude oil of Simarouba glauca by transesterification with methanol in the presence of KOH as a catalyst. The reaction parameters such as catalyst concentration, alcohol to oil molar ratio, temperature and rate of mixing were optimised for the production of Simarouba oil methyl ester. The yield of methyl esters from Simarouba oil under the optimal condition was 94–95%. Important fuel properties of methyl esters of Simarouba oil (biodiesel) was compared with ASTM and DIN EN 14214. The viscosity was found to be 4.68 Cst at 40°C and the flashpoint was 165°C.     

Biodiesel synthesis from Hevea brasiliensis oil employing carbon supported heterogeneous catalyst: Optimization by Taguchi method

The present work illustrates the parametric effects on biodiesel production from Hevea brasiliensis oil (HBO) using flamboyant pods derived carbonaceous heterogeneous catalyst. Activated carbon (AC) was prepared maintaining 500 °C for 1 h and steam activated at optimised values of activation time 1.5 h and temperature 350 °C. Carbonaceous support was impregnated with KOH at different AC/KOH ratios. The transesterification process was optimized and significant parameters affecting the biodiesel yield was identified by Taguchi method considering four parameters viz. reaction time, reaction temperature, methanol to oil ratio and catalyst loading. The physicochemical properties of Hevea brasiliensis methyl ester (HBME) were examined experimentally at optimised condition and found to meet the global American standards for testing and materials (ASTM). The optimum condition observed to yield 89.81% of biodiesel were: reaction time 60 min, reaction temperature 55 °C, catalyst loading 3.5wt% and methanol to oil ratio 15:1. Contribution factor revealed that among four parameters considered, catalyst loading and methanol to oil ratio have more prominent effect on biodiesel yield. The cost for preparing carbonaceous catalyst support was estimated and observed to be fairly impressive. Thus, Hevea brasiliensis oil (HBO) could be considered as suitable feedstock and flamboyant pods derived carbon as effective catalyst for production of biodiesel.     

Biodiesel from low cost feedstocks: The effects of process parameters on the biodiesel yield

Biofuel (e.g. biodiesel) has attracted increasing attention worldwide as blending component or direct replacement for fossil fuel in fuel energized engines. The substitution of petroleum-based diesel with biodiesel has already attained commercial value in many of the developed countries around the world. However, the use of biodiesel has not expanded in developing countries mostly due to the high production cost which is associated with the expensive high-quality virgin oil feedstocks. This research focuses on producing of biodiesel from low cost feedstocks such as used cooking oil (UCO) and animal fat (AF) via alkaline catalyzed transesterification process investigating the effects of process parameters, for example (i) molar ratio of feedstock to methanol (ii) catalyst concentration (iii) reaction temperature and (iv) reaction period on the biodiesel yield. The biodiesel was successfully produced via transesterification process from low cost feedstocks. It was also observed that the process parameters directly influenced the biodiesel yield. The optimum parameters for maximum biodiesel yields were found to be methanol/oil molar ratio of 6:1, catalyst concentration of 1.25 wt% of oil, reaction temperature of 65 °C, reaction period of 2 h and stirring speed of 150 rpm. The maximum biodiesel yields at the optimum conditions were 87.4%, 89% and 88.3% for beef fat, chicken fat and UCO, respectively. The results demonstrate high potential of producing economically viable biodiesel from low cost feedstocks with proper optimization of the process parameters.     

Validation and enhancement of waste cooking sunflower oil based biodiesel production by the trans-esterification process

This article predicts the optimum conditions for the production of fatty acid ethyl ester (Biodiesel) by trans-esterification process of waste cooking sunflower oil with ethanol in the presence of homogeneous catalyst (KOH). Response surface methodology (RSM) based on central composite rotatable design (CCRD) was used for predicting the mathematical regression equation and optimizing the biodiesel yield. The optimum reaction conditions were found to be 9.05 (mole mole^?1) of (ethanol to waste cooking sunflower oil ratio), 0.99 (wt% to oil) of catalyst concentration, 57.31°C of reaction temperature, 77.12 minutes of reaction time, and 494.94 rpm of mixing rate to achieve 96.33% biodiesel yield by weight. The production rate of produced biodiesel also increased significantly. The fuel properties were measured and found closer to the ASTM standards of biodiesel. Therefore, the suggested biofuel has good scope for use in compression ignition (CI) engines.     

Improved transesterification of waste cooking oil into biodiesel using calcined goat bone as a catalyst

In this study, potassium hydroxide-treated animal bones were employed? as a solid heterogeneous catalyst in transesterification of waste cooking oil. This catalyst was characterized by the Fourier-transform infrared spectroscopy (FTIR), and it displayed high-catalytic activity for biodiesel production. Optimum conditions for biodiesel production were catalyst loading 6.0% (w/w) of oil, methanol/oil molar ratio 9:1, calcination temperature 800°C, reaction temperature 65°C, and reaction time of 5 h, which gave maximum biodiesel yield of 84%. Reusability of the catalyst was also confirmed by repeated use of the same catalyst three times without losing much of its activity. Hence, calcined goat bones were found to be a potentially applicable catalyst for biodiesel production at industrial scale.     

Muskmelon (Cucumis melo) seed oil: A potential non-food oil source for biodiesel production

Methanolysis of muskmelon seed oil was optimized employing RSM (response surface methodology). Four process variables were evaluated at two levels: methanol/oil molar ratio (3:1–12:1), catalyst concentration in relation to oil mass (0.25–1.25 wt % KOH), reaction temperature (25–65 °C) and methanolysis reaction time (20–90 min). Multiple regression analysis was employed to get the quadratic polynomial equation for predicting transesterification using RSM. The result indicated that catalyst concentration and reaction temperature were the important factors that significantly affect the yield of MMOMEs (muskmelon oil methyl esters)/biodiesel. The RSM methodology was used to obtain methyl esters yield (89.5%) were found at following reaction conditions; 5.8:1 methanol-to-oil ratio, 0.79% catalyst concentration, 55 °C reaction temperature and 72.5-min reaction time. There was a linear correlation between observed and predicted values. The biodiesel was analyzed using GC/MS (gas chromatography/mass spectrometry) which indicated four FAMEs (fatty acid methyl esters) (linoleic-, oleic-, palmitic- and stearic acids) as its major components. The FT-IR (fourier transform infraRed) spectrum of MMOMEs was also acquired to ensure the confirmation of methyl esters formation. Fuel properties of MMOMEs were determined and found to satisfy the ASTM D 6751 and EU 14214 specifications.     

Biodiesel production from mixed soybean oil and rapeseed oil

The biodiesel (fatty acid methyl esters, FAME) was prepared by transesterification of the mixed oil (soybean oil and rapeseed oil) with sodium hydroxide (NaOH) as catalyst. The effects of mole ratio of methanol to oil, reaction temperature, catalyst amount and reaction time on the yield were studied. In order to decrease the operational temperature, a co-solvent (hexane) was added into the reactants and the conversion efficiency of the reaction was improved. The optimal reaction conditions were obtained by this experiment: methanol/oil mole ratio 5.0:1, reaction temperature 55 °C, catalyst amount 0.8 wt.% and reaction time 2.0 h. Under the optimum conditions, a 94% yield of methyl esters was reached ∼94%. The structure of the biodiesel was characterized by FT-IR spectroscopy. The sulfur content of biodiesel was determined by Inductively Coupled Plasma emission spectrometer (ICP), and the satisfied result was obtained. The properties of obtained biodiesel from mixed oil are close to commercial diesel fuel and is rated as a realistic fuel as an alternative to diesel. Production of biodiesel has positive impact on the utilization of agricultural and forestry products.     

Optimization of biodiesel production from grape seed oil using Taguchi's orthogonal array​

The physicochemical properties of biodiesel are very similar to those of petroleum diesel fuel. The main focus of this study is the production of the biodiesel from grape seed oil. This study shows the optimization of the operation parameters, specifically regarding catalyst concentration, the reaction time, the molar ratio (i.e., methanol-to-oil ratio), and the reaction temperature for the production of biodiesel. The effect of operation factors on performance parameters is analyzed using Taguchi’s orthogonal array. The results depict that 96.90% was the optimum biodiesel yield at a molar ratio 6:1 with a catalyst concentration of 1% by weight and a reaction time of 60 min at 60°C and 4.34 cSt was the optimum biodiesel viscosity at a molar ratio of 6:1 with a catalyst concentration of 0.5% by weight and a reaction time of 75 min at 45°C. The most effective parameter was observed to be catalyst concentration, which conferred 76.39%, and 53.74% of the total influence on the biodiesel yield (Y₁) and viscosity (Y₂), respectively.     

Processing and characterization of biodiesel from sweet orange (Citrus sinensis) seed oil

Biodiesel is an eco-friendly fuel source which is produced from various oil sources. In this study, sinensis oil is tried as a biodiesel source. But seed is simply dumped as waste material to the environment. It contains 30–35% of oil content and can be processed by the transesterification method. The fatty acid profile of sinensis oil is analyzed by gas chromatography-mass spectrophotometer techniques. This study also describes the characterization and optimization of sinensis oil to biodiesel. The optimized biodiesel parameters were as follows: KOH catalyst, 6:1 molar ratio, 1.0 wt.% of catalyst concentration, 60°C temperature, and 120 min reaction time.     

A comparative study of vegetable oil methyl esters (biodiesels)

In the present study, rubber seed oil, coconut oil and palm kernel oil, which are locally available especially in Kerala (India), are chosen and their transesterification processes have been investigated. The various process variables like temperature, catalyst concentration, amount of methanol and reaction time were optimized. Biodiesel from rubber seed oil (with high free fatty acid) was produced by employing two-step pretreatment process (acid esterification) to reduce acid value from 48 to 1.72 mg KOH/g with 0.40 and 0.35 v/v methanol-oil ratio and 1.0% v/v H₂SO₄ as catalyst at a temperature of 63(±2) °C with 1 h reaction time followed by transesterification using methanol-oil ratio of 0.30 v/v, 0.5 w/v KOH as alkaline catalyst at 55(±2) °C with 40 min reaction time to yield 98-99% biodiesel. Coconut oil and palm oil, being edible oils, transesterification with 0.25 v/v methanol-oil ratio, 0.50% w/v KOH as at 58(±2) °C, 20 min reaction time for coconut oil and 0.25% v/v methanol-oil ratio, 0.50% w/v KOH as alkaline catalyst at 60(±2) °C for palm kernel oil will convert them to 98-99% biodiesel. The brake thermal efficiency of palm oil biodiesel was higher with lower brake specific fuel consumption, but rubber seed oil biodiesel(ROB) showed less emission (CO and NO_x) compared to other biodiesels.     

Biodiesel synthesis from Acacia concinna seed oil: A comprehensive study

In the present investigation, biodiesel (BD) production from Acacia concinna nonedible seed oil using physical pretreatment (turbulent agitation method) and transesterification process has been optimized and modeled using neural network Artificial neural network- Adaptive neuro-fuzzy inference system (ANN-ANFIS), Grey relational analysis? and desirability function approach? approach considering both quantity (production yield) and quality (fuel properties) responses. Different process parameters were examined for their relative significance on output responses. At optimized process variables, methanol/oil (8.3:1), catalyst KOH (0.95 wt%), and reaction temperature and time (65°C and 37.5 min), augment the yield and calorific value by 17.2 and 5.77% and reduce the viscosity and free fatty acid? valueby 18.26 and 57.30%, respectively, with global desirability of D= 0.664. The produced BD was characterized by ¹H NMR, fatty esters (GC analysis), and fuel properties. The developed model equations for output responses help in accurate prediction of results. A. concinna feedstock proved to be a viable source for biodiesel production.     

Optimization and oxidative stability of biodiesel production from rice bran oil

Biorefinery approach is introduced for the biodiesel production by utilizing low cost raw material, such as rice bran oil (RBO). The valorization of RBO was carried out by homogeneous transesterification process using response surface methodology (RSM) based on a two-variable central composition design (CCD). The process variables, temperature and catalyst concentration were found to have significant influence on biodiesel yield. The optimum combination derived via RSM for high ester yield (99.4%) was found to be 0.75% wt catalyst concentration at a reaction temperature of 45 °C. As biodiesel chemically is a long-chain alkyl methyl esters, its long-term fuel properties have become of great concern to the fuel industry. In order to determine the effects of long storage on oxidation stability, RBO biodiesel sample was stored for 24 months and the different physical–chemical properties were checked with respect to time. The results show that the acid value (AV), peroxide value (PV), and viscosity (ν) increased while the iodine value (IV) decreased. Based on results, correlations were obtained in terms of AV, IV, PV and ν as a function of time. Those correlations can be used to predict how long time biodiesel can safely be stored. AV, IV and PV of the biodiesel sample which was stored were within the limits in European biodiesel specifications (EN 14214).     

Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production

Response surface methodology (RSM), with central composite rotatable design (CCRD), was used to explore optimum conditions for the transesterification of Moringa oleifera oil. Effects of four variables, reaction temperature (25–65 °C), reaction time (20–90 min), methanol/oil molar ratio (3:1–12:1) and catalyst concentration (0.25–1.25 wt.% KOH) were appraised. The quadratic term of methanol/oil molar ratio, catalyst concentration and reaction time while the interaction terms of methanol/oil molar ratio with reaction temperature and catalyst concentration, reaction time with catalyst concentration exhibited significant effects on the yield of Moringa oil methyl esters (MOMEs)/biodiesel, p < 0.0001 and p < 0.05, respectively. Transesterification under the optimum conditions ascertained presently by RSM: 6.4:1 methanol/oil molar ratio, 0.80% catalyst concentration, 55 °C reaction temperature and 71.08 min reaction time offered 94.30% MOMEs yield. The observed and predicted values of MOMEs yield showed a linear relationship. GLC analysis of MOMEs revealed oleic acid methyl ester, with contribution of 73.22%, as the principal component. Other methyl esters detected were of palmitic, stearic, behenic and arachidic acids. Thermal stability of MOMEs produced was evaluated by thermogravimetric curve. The fuel properties such as density, kinematic viscosity, lubricity, oxidative stability, higher heating value, cetane number and cloud point etc., of MOMEs were found to be within the ASTM D6751 and EN 14214 biodiesel standards.     

生物质结渣固体碱催化剂制备生物柴油

采用经气化炉烧结的生物质结渣为固体碱催化剂,催化油脂转化合成生物柴油.对固体碱催化剂进行表征,并考察物质的量之比、反应温度、反应时间和催化剂用量对反应的影响.结果表明:生物质结渣固体碱催化剂主要成分(按质量分数计)为SiO2(40％～60％)、CaO(10％～20％)、K2O(10％～15％)、MgO(≤10％)、Al...