One-step electrochemical approach to the synthesis of Graphene/MnO2 nanowall hybrids

We have demonstrated a one-step and effective electrochemical method to synthesize graphene/MnO₂ nanowall hybrids (GMHs). Graphene oxide (GO) was electrochemically reduced to graphene (GN), accompanied by the simultaneous formation of MnO₂ with a nanowall morphology via cathodic electrochemical deposition. The morphology and structure of the GMHs were systematically characterized by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Raman spectroscopy. The resulting GMHs combine the advantages of GN and the nanowall array morphology of MnO₂ in providing a conductive network of amorphous nanocomposite, which shows good electrochemical capacitive behavior. This simple approach should find practical applications in the large-scale production of GMHs.      

Ionic liquid-assisted one-step hydrothermal synthesis of TiO2-reduced graphene oxide composites

We have demonstrated a facile and efficient strategy for the fabrication of soluble reduced graphene oxide sheets (RGO) and the preparation of titanium oxide (TiO₂) nanoparticle-RGO composites using a modified one-step hydrothermal method. It was found that graphene oxide could be easily reduced under solvothermal conditions with ascorbic acid as reductant, with concomitant growth of TiO₂ particles on the RGO surface. The TiO₂-RGO composite has been thoroughly characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Microscopy techniques (scanning electron microscopy, atomic force microscopy, and transmission electron microscopy) have been employed to probe the morphological characteristics as well as to investigate the exfoliation of RGO sheets. The TiO₂-RGO composite exhibited excellent photocatalysis of hydrogen evolution.      

Production of graphene nanospheres by annealing of graphene oxide in solution

We report a simple method to produce graphene nanospheres (GNSs) by annealing graphene oxide (GO) solution at high-temperature with the assistance of sparks induced by the microwave absorption of graphite flakes dispersed in the solution. The GNSs were formed by rolling up of the annealed GO, and the diameters were mostly in the range 300–700 nm. The GNS exhibited a hollow sphere structure surrounded by graphene walls with a basal spacing of 0.34 nm. Raman spectroscopy and X-ray photoelectron spectroscopy of the GNSs confirmed that the GO was efficiently reduced during the fabrication process. The resulting GNSs may open up new opportunities both for fundamental research and applications, and this method may be extended to the synthesis of other nanomaterials and the fabrication of related nanostructures.      

Aqueous-phase synthesis of Ag-TiO2-reduced graphene oxide and Pt-TiO2-reduced graphene oxide hybrid nanostructures and their catalytic properties

We demonstrate an aqueous solution method for the synthesis of a Ag-TiO₂-reduced graphene oxide (rGO) hybrid nanostructure (NS) in which the Ag and TiO₂ particles are well dispersed on the rGO sheet. The Ag-TiO₂-rGO NS was then used as a template to synthesize Pt-TiO₂-rGO NS. The resulting hybrid NSs were characterized by transmission electron microscopy (TEM), high-resolution TEM (HRTEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, UV-vis spectroscopy, Raman spectroscopy, inductively coupled plasma mass spectrometry (ICP-MS), and catalytic studies. It was found that TiO₂-rGO, Ag-TiO₂-rGO and Pt-TiO₂-rGO NSs all show catalytic activity for the reduction of p-nitrophenol to p-aminophenol by NaBH₄, and that Pt-TiO₂-rGO NS exhibits the highest catalytic activity as well as excellent stability and easy recyclability.      

Functionalization of silicon nanowire surfaces with metal-organic frameworks

Metal-organic frameworks (MOFs) and silicon nanowires (SiNWs) have been extensively studied due to their unique properties; MOFs have high porosity and specific surface area with well-defined nanoporous structure, while SiNWs have valuable one-dimensional electronic properties. Integration of the two materials into one composite could synergistically combine the advantages of both materials and lead to new applications. We report the first example of a MOF synthesized on surface-modified SiNWs. The synthesis of polycrystalline MOF-199 (also known as HKUST-1) on SiNWs was performed at room temperature using a step-by-step (SBS) approach, and X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy dispersive spectroscopy elemental mapping were used to characterize the material. Matching of the SiNW surface functional groups with the MOF organic linker coordinating groups was found to be critical for the growth. Additionally, the MOF morphology can by tuned by changing the soaking time, synthesis temperature and precursor solution concentration. This SiNW/MOF hybrid structure opens new avenues for rational design of materials with novel functionalities.      

A facile one-step synthesis of TiO2/graphene composites for photodegradation of methyl orange

TiO₂/graphene composite photocatalysts have been prepared by a simple liquid phase deposition method using titanium tetrafluoride and electron beam (EB) irradiation-pretreated graphene as the raw materials. The products were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The effects of varying the synthesis parameters such as graphene content, concentration of titanium tetrafluoride solution and irradiation dose were investigated. It was found that the preparation conditions had a significant effect on the structure and properties of the final products. The irradiated graphene was covered with petal-like anatase TiO₂ nanoparticles, which were more uniform and smaller in size than those in products synthesized without EB irradiation-pretreated graphene. The photocatalytic activities of the products were evaluated using the photocatalytic degradation of methyl orange as a probe reaction. The results showed that the products synthesized using EB irradiation-pretreated graphene exhibited higher photocatalytic activities than those using graphene without EB irradiation pretreatment.      

Polarized light microscopy and spectroscopy of individual single-walled carbon nanotubes

Polarized light microscopy (PLM) is used to image individual single-walled carbon nanotubes (SWNTs) suspended in air across a slit opening. The imaging contrast relies on the strong optical anisotropy typical of SWNTs. We combine PLM with a tunable light source to enable hyperspectral excitation spectroscopy and nanotube chirality assignment. Comparison with fluorescence microscopy and spectroscopy confirms the assignment made with PLM. This represents a versatile new approach to imaging SWNTs and related structures.      

Is graphene aromatic?

We analyze the chemical bonding in graphene using a fragmental approach, the adaptive natural density partitioning method, electron sharing indices, and nucleus-independent chemical shift indices. We prove that graphene is aromatic, but its aromaticity is different from the aromaticity in benzene, coronene, or circumcoronene. Aromaticity in graphene is local with two π-electrons delocalized over every hexagon ring. We believe that the chemical bonding picture developed for graphene will be helpful for understanding chemical bonding in defects such as point defects, single-, double-, and multiple vacancies, carbon adatoms, foreign adatoms, substitutional impurities, and new materials that are derivatives of graphene.      

A general synthetic strategy to monolayer graphene

The emergence and establishment of new techniques for material fabrication are of fundamental importance in the development of materials science. Thus, we herein report a general synthetic strategy for the preparation of monolayer graphene. This novel synthetic method is based on the direct solid-state pyrolytic conversion of a sodium carboxylate, such as sodium gluconate or sodium citrate, into monolayer graphene in the presence of Na₂CO₃. In addition, gram-scale quantities of the graphene product can be readily prepared in several minutes. Analysis using Raman spectroscopy and atomic force microscopy clearly demonstrates that the pyrolytic graphene is composed of a monolayer with an average thickness of ～0.50 nm. Thus, the present pyrolytic conversion can overcome the issue of the low monolayer contents (i.e., 1 wt.%–12 wt.%) obtained using exfoliation methods in addition to the low yields of chemical vapor deposition methods. We expect that this novel technique may be suitable for application in the preparation of monolayer graphene materials for batteries, supercapacitors, catalysts, and sensors.

Open image in new window

     

Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors

A series of inkjet printing processes have been studied using graphene-based inks. Under optimized conditions, using water-soluble single-layered graphene oxide (GO) and few-layered graphene oxide (FGO), various high image quality patterns could be printed on diverse flexible substrates, including paper, poly(ethylene terephthalate) (PET) and polyimide (PI), with a simple and low-cost inkjet printing technique. The graphene-based patterns printed on plastic substrates demonstrated a high electrical conductivity after thermal reduction, and more importantly, they retained the same conductivity over severe bending cycles. Accordingly, flexible electric circuits and a hydrogen peroxide chemical sensor were fabricated and showed excellent performances, demonstrating the applications of this simple and practical inkjet printing technique using graphene inks. The results show that graphene materials-which can be easily produced on a large scale and possess outstanding electronic properties-have great potential for the convenient fabrication of flexible and low-cost graphene-based electronic devices, by using a simple inkjet printing technique.      

Facile, noncovalent decoration of graphene oxide sheets with nanocrystals

Facile dry decoration of graphene oxide sheets with aerosol Ag nanocrystals synthesized from an arc plasma source has been demonstrated using an electrostatic force directed assembly technique at room temperature. The Ag nanocrystal-graphene oxide hybrid structure was characterized by transmission electron microscopy (TEM) and selected area diffraction. The ripening of Ag nanocrystals on a graphene oxide sheet was studied by consecutive TEM imaging of the same region on a sample after heating in Ar at elevated temperatures of 100 °C, 200 °C, and 300 °C. The average size of Ag nanocrystals increased and the number density decreased after the annealing process. In particular, migration and coalescence of Ag nanocrystals were observed at a temperature as low as 100 °C, suggesting a van der Waals interaction between the Ag nanocrystal and the graphene oxide sheet. The availability of affordable graphene-nanocrystal structures and their fundamental properties will open up new opportunities for nanoscience and nanotechnology and accelerate their applications. This article is published with open access at Springerlink.com     

Synthesis of large-area, few-layer graphene on iron foil by chemical vapor deposition

We demonstrate a simple and controllable way to synthesize large-area, few-layer graphene on iron substrates by an optimized chemical vapor deposition (CVD) method using a mixture of methane and hydrogen. Based on an analysis of the Fe-C phase diagram, a suitable procedure for the successful synthesis of graphene on Fe surfaces was designed. An appropriate temperature and cooling process were found to be very important in the synthesis of highly crystalline few-layer graphene. Graphene-based field-effect transistor (FET) devices were fabricated using the resulting few-layer graphene, and showed good quality with extracted mobilities of 300–1150 cm²/(V·s).      

Graphene-induced Pd nanodendrites: A high performance hybrid nanoelectrocatalyst

A facile and green approach has been developed for the in situ synthesis of hybrid nanomaterials based on dendrite-shaped Pd nanostructures supported on graphene （RG）. The as-synthesized hybrid nanomaterials （RG-PdnDs） have been thoroughly characterized by high resolution transmission electron microscopy, X-ray photoelectron spectroscop）~ atomic force microscop）~ Raman spectroscopy and electrochemical techniques. The mechanism of formation of such dendrite- shaped Pd nanostructures on the graphene support has been elucidated using transmission electron microscopy （TEM） measurements. The RG induces the formation of, and plays a decisive role in shaping, the dendrite morphology of Pd nanostructures on its surface. Cyclic voltammetry and chronoamperometry techniques have been employed to evaluate the electrochemical performance of RG-PdnDs towards oxidation of methanol. The electrochemical （EC） activities of RG-PdnDs are compared with graphene-supported spherical-shaped Pd nanostructures, Pd nanodendrites alone and a commercial available Pd/C counterpart. The combined effect of the graphene support and the dendrite morphology of RG-PdnDs triggers the high electrocatalytic activity and results in robust tolerance to CO poisoning.     

Low-cost synthesis of robust anatase polyhedral structures with a preponderance of exposed {001} facets for enhanced photoactivities

Anatase polyhedral materials with a preponderance of exposed {001} facets have been produced using (NH₄)₂TiF₆ and water as raw materials. The crystallographic structure and the growth mechanism of the anatase TiO₂ product were investigated systematically by XRD (X-ray diffraction), scanning electron microscopy (SEM), TEM (transmission electron microscope), and ultraviolet (UV) visible and photoluminescence spectroscopy. The products exhibited significantly higher activities than commercial P25 titania nanoparticles in the photocatalytic degradation of methylene blue dye. Moreover, the materials have large particle sizes and are very robust, making them suited for practical uses.      

Facile synthesis and application of Ag-chemically converted graphene nanocomposite

An in situ chemical synthesis approach has been employed to prepare an Ag-chemically converted graphene (CCG) nanocomposite. The reduction of graphene oxide sheets was accompanied by generation of Ag nanoparticles. The structure and composition of the nanocomposites were confirmed by means of transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray diffraction. TEM and AFM results suggest a homogeneous distribution of Ag nanoparticles (5–10 nm in size) on CCG sheets. The intensities of the Raman signals of CCG in such nanocomposites are greatly increased by the attached silver nanoparticles, i.e., there is surface-enhanced Raman scattering activity. In addition, it was found that the antibacterial activity of free Ag nanoparticles is retained in the nanocomposites, which suggests they can be used as graphene-based biomaterials.      

Tunable separation of single-walled carbon nanotubes by dual-surfactant density gradient ultracentrifugation

We present a systematic study of the effects of surfactants in the separation of single-walled carbon nanotubes (SWNTs) by density gradient ultracentrifugation (DGU). Through analysis of the buoyant densities, layer positions, and optical absorbance spectra of SWNT separation using the bile salt sodium deoxycholate (DOC) and the anionic salt sodium dodecyl sulfate (SDS), we clarify the roles and interactions of these two surfactants in yielding different DGU outcomes. The separation mechanism described here can also help in designing new DGU experiments by qualitatively predicting outcomes of different starting recipes, improving the efficacy of DGU and simplifying post-DGU fractionation.      

Scanning tunneling microscope observations of non-AB stacking of graphene on Ni films

Microscopic features of graphene segregated on Ni films prior to chemical transfer—including atomic structures of monolayers and bilayers, Moiré patterns due to non-AB stacking, as well as wrinkles and ripples caused by strain effects-have been characterized in detail by high-resolution scanning tunneling microscopy (STM). We found that the stacking geometry of the bilayer graphene usually deviates from the traditional Bernal stacking (or so-called AB stacking), resulting in the formation of a variety of Moiré patterns. The relative rotations inside the bilayer were then qualitatively deduced from the relationship between Moiré patterns and carbon lattices. Moreover, we found that typical defects such as wrinkles and ripples tend to evolve around multi-step boundaries of Ni, thus reflecting strong perturbations from substrate corrugations. These investigations of the morphology and the mechanism of formation of wrinkles and ripples are fundamental topics in graphene research. This work is expected to contribute to the exploration of electronic and transport properties of wrinkles and ripples.      

Facile synthesis of ZnO nanocrystals via a solid state reaction for high performance plastic dye-sensitized solar cells

We report the facile synthesis of ZnO nanocrystals via a one-step solid state reaction at room temperature and their application as the photoanode in plastic dye-sensitized solar cells (DSCs). ZnO nanoparticles were prepared utilizing zinc acetate dihydrate and sodium hydroxide with a short grinding time and without a sintering process. The as-prepared samples with the polycrystalline hexagonal wurtzite structure were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The obtained ZnO nanoparticles exhibited high crystallinity even without a high temperature sintering treatment during the preparation process. The effects of compression post-treatment on the photovoltaic performance of DSCs were also investigated using intensity modulated photocurrent spectroscopy (IMPS), incident photo-to-current conversion efficiency (IPCE), and electrochemical impedance spectroscopy (EIS). The results indicate that the improvement of power conversion efficiency after compression post-treatment of ZnO photoelectrode can be attributed to its high photoelectron collection efficiency and effective electron transport. Under the optimized conditions, a full plastic D149-sensitized ZnO solar cell measured under illumination of 100 mW·cm⁻² (AM 1.5G) presents an energy conversion efficiency of 3.76% with open-circuit voltage of 0.688 V, short-circuit current density of 8.55 mA·cm⁻², and fill factor of 0.64. These results demonstrate that the one-step solid state reaction is a convenient and effective method for the synthesis of ZnO nanocrystals for use in plastic DSCs.      

A facile tool for the characterization of two-dimensional materials grown by chemical vapor deposition

The metrology of two-dimensional (2D) materials such as graphene, boron nitride or molybdenum disulfide grown by chemical vapor deposition (CVD) is critical for the optimization of their synthesis. We demonstrate the use of film-induced frustrated etching (FIFE) as a facile, scalable method to reveal and quantify structural defects in continuous thin sheets. The sensitivity of the analysis technique to intentionally induced lattice defects in graphene compares favorably to the sensitivity of Raman spectroscopy. A strong correlation between the measured defectiveness and the maximum carrier mobility in graphene emphasizes the importance of the technique for growth optimization. Due to its ease and widespread availability, we anticipate that FIFE will find wide application in the characterization of CVD-synthesized 2D materials.      

Fe Nanoclusters on the Ge（001） Surface Studied by Scanning Tunneling Microscopy,Density Functional Theory Calculations and X-Ray Magnetic Circular Dichroism

The growth of Fe nanoclusters on the Ge(001) surface has been studied using low-temperature scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. STM results indicate that Fe nucleates on the Ge(001) surface, forming well-ordered nanoclusters of uniform size. Depending on the preparation conditions, two types of nanoclusters were observed having either four or sixteen Fe atoms within a nanocluster. The results were confirmed by DFT calculations. Annealing the nanoclusters at 420 K leads to the formation of nanorow structures, due to cluster mobility at such temperature. The Fe nanoclusters and nanorow structures formed on the Ge(001) surface show a superparamagnetic behaviour as measured by X-ray magnetic circular dichroism.