Inactivation of biofilm cells of foodborne pathogens by steam pasteurization

The objective of this study was to evaluate the effect of steam pasteurization on the inactivation of Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes biofilms on stainless steel and polyvinyl chloride (PVC). Biofilms were formed on a stainless steel and PVC coupon by using a mixture of three strains each of three foodborne pathogens. Six-day-old biofilms on stainless steel and PVC coupons were treated with steam at 75 and 85 °C for 5, 10, 20, 30, 40, and 50 s. Biofilm cells of E. coli O157:H7, S. Typhimurium, and L. monocytogenes on stainless steel were reduced by more than 6 log CFU/coupon after exposure to steam at 75 °C for 30, 40, and 30 s, respectively, and at 85 °C for 30, 20, and 20 s, respectively. Steam treatment resulted in less reduction in the levels of biofilm cells on PVC coupons. Biofilm cells of E. coli O157:H7, S. Typhimurium, and L. monocytogenes were reduced by 1.78, 2.04, and 1.29 log CFU/coupon, respectively, after 50 s of exposure to steam at 75 °C. Exposure to steam at 85° for 50 s reduced biofilm cells of E. coli O157:H7, S. Typhimurium, and L. monocytogenes by 2.53, 3.01, and 1.70 log CFU/coupon, respectively. The results of this study suggest that steam pasteurization has potential as a biofilm control method by the food industry.     

Inactivation of biofilm cells of foodborne pathogen by aerosolized sanitizers

The objective of this study was to determine the effect of aerosolized sanitizers on the inactivation of Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes biofilms. Biofilms were formed on a stainless steel and polyvinyl chloride (PVC) coupon by using a mixture of three strains each of three foodborne pathogens. Six day old biofilms on stainless steel and PVC coupons were treated with aerosolized sodium hypochlorite (SHC; 100 ppm) and peracetic acid (100, 200, and 400 ppm) in a model cabinet for 5, 10, 30, and 50 min. Treatment with 100 ppm PAA was more effective than the same concentration of SHC with increasing treatment time. Exposure to 100 ppm SHC and PAA for 50 min significantly (p<0.05) reduced biofilm cells of three foodborne pathogens (0.50 to 3.63 log CFU/coupon and 2.83 to more than 5.78 log CFU/coupon, respectively) compared to the control treatment. Exposure to 200 and 400 ppm PAA was more effective in reducing biofilm cells. Biofilm cells were reduced to below the detection limit (1.48 log CFU/coupon) between 10 and 30 min of exposure. The results of this study suggest that aerosolized sanitizers have a potential as a biofilm control method in the food industry.     

Fate of biofilm cells of Cronobacter sakazakii under modified atmosphere conditions

Survival of biofilm cells of Cronobacter sakazakii formed on stainless steel and polyvinyl chloride (PVC) on exposure to different atmosphere conditions was studied. Biofilms were formed on stainless steel and PVC coupons by using three strains of C. sakazakii. Six day old biofilms on stainless steel and PVC coupons were stored under N₂ gas, CO₂ gas, and air for up to 20 days. N₂ and CO₂ gases resulted in significant (p < 0.05) further reductions of 1.79 and 2.47 log CFU/cm² after 20 days of storage, respectively, compared to air storage. N₂ and CO₂ gases led to less reduction of biofilm cells on PVC compared to those on stainless steel. N₂ and CO₂ gases resulted in significant (p < 0.05) further reductions of 0.98 and 1.20 log CFU/cm² after 20 days of storage, respectively, compared to air storage.     

Lethality of chlorine, chlorine dioxide, and a commercial produce sanitizer to Bacillus cereus and Pseudomonas in a liquid detergent, on stainless steel, and in biofilm

Many factors that are not fully understood may influence the effectiveness of sanitizer treatments for eliminating pathogens and spoilage microorganisms in food or detergent residues or in biofilms on food contact surfaces. This study was done to determine the sensitivities of Pseudomonas cells and Bacillus cereus cells and spores suspended in a liquid dishwashing detergent and inoculated onto the surface of stainless steel to treatment with chlorine, chlorine dioxide, and a commercial produce sanitizer (Fit). Cells and spores were incubated in a liquid dishwashing detergent for 16 to 18 h before treatment with sanitizers. At 50 microg/ml, chlorine dioxide killed a significantly higher number of Pseudomonas cells (3.82 log CFU/ml) than did chlorine (a reduction of 1.34 log CFU/ml). Stainless steel coupons were spot inoculated with Pseudomonas cells and B. cereus cells and spores, with water and 5% horse serum as carriers. Chlorine was more effective than chlorine dioxide in killing cells and spores of B. cereus suspended in horse serum. B. cereus biofilm on stainless steel coupons that were treated with chlorine dioxide or chlorine at 200 microg/ml had total population reductions (vegetative cells plus spores) of > or = 4.42 log CFU per coupon; the number of spores was reduced by > or = 3.80 log CFU per coupon. Fit (0.5%) was ineffective for killing spot-inoculated B. cereus and B. cereus in biofilm, but treatment with mixtures of Fit and chlorine dioxide caused greater reductions than did treatment with chlorine dioxide alone. In contrast, when chlorine was combined with Fit, the lethality of chlorine was completely lost. This study provides information on the survival and sanitizer sensitivity of Pseudomonas and B. cereus in a liquid dishwashing detergent, on the surface of stainless steel, and in a biofilm. This information will be useful for developing more effective strategies for cleaning and sanitizing contact surfaces in food preparation and processing environments.     

INACTIVATION OF LISTERIA MONOCYTOGENES BIOFILMS BY ELECTROLYZED OXIDIZING WATER

This study investigates the resistance of Listeria monocytogenes biofilms on stainless steel surfaces to electrolyzed oxidizing (EO) water. A direct agar overlay method was used to estimate the attached bacteria on stainless steel coupons after an EO water treatment. A scraping method was also used to quantify the adherent cell populations after the EO water treatment. The stainless steel surface allowed 10 to 15% of the surface area to be covered by Listeria biofilm when the inoculated stainless steel coupon was incubated in 10% tryptic soy broth (TSB) at 23C for 48 h. When the stainless steel coupons containing adherent cells were treated with EO water (56 mg/L of residual chlorine) for 10, 30, 60, 180, and 300 s, adherent cell populations (10.3 log¹⁰ CFU/coupon) were reduced with increasing treatment time. Although the direct agar overlay methods do not quantify survival of single bacteria, only one to five cell clumps per coupon survived after 300 s of the EO water treatment. Using the scraping method, the adherent cell population on the stainless steel coupons was reduced by about 9 log cycles after 300 s of EO water treatment.     

Influence of peroxyacetic acid and nisin and coculture with Enterococcus faecium on Listeria monocytogenes biofilm formation

Biofilm formation is a matter of concern in food industries because biofilms facilitate the survival of pathogenic bacteria such as Listeria monocytogenes, which may contaminate food-processing equipment and products. In this study, nisin and two Enterococcus faecium strains were evaluated for their effect on biofilm formation by L. monocytogenes cultured in brain heart infusion broth and on stainless steel coupons. Elimination of preformed L. monocytogenes biofilms by peroxyacetic acid also was tested. Adhesion control experiments were performed with pure cultures of L. monocytogenes after swab collection of adhered cells, which were then enumerated on PALCAM agar plates and visualized by scanning electron microscopy. Formation of a biofilm was recorded when the number of adhered cells was at least 10(3) CFU/cm2. When L. monocytogenes was cocultured with E. faecium bac-, the number of adhered L. monocytogenes cells was 2.5 log lower (P = 0.002) when initially compared with the control culture, but after 6 h of incubation a biofilm was again detected. However, in coculture on stainless steel coupons, E. faecium bac+ inhibited L. monocytogenes adherence and did not allow biofilm formation for up to 48 h (P < 0.001). In the presence of nisin or after treatment with peroxyacetic acid, bacterial growth was reduced (P < 0.001) up to 4.6 and 5.6 log CFU/cm2, respectively, when compared with L. monocytogenes cultures on untreated coupons. However, after these treatments, cells were still present, and after 24 h of incubation, a renewed biofilm was detected in L. monocytogenes cultures treated with nisin. Although all tested conditions reduced L. monocytogenes growth to some extent, only coculture with E. faecium bac+ efficiently reduced biofilm formation, suggesting a potential control strategy for this pathogen.     

Reduction of Escherichia coli O157:H7 in Biofilms Using Bacteriophage BPECO 19

Biofilm formation is a growing concern in the food industry. Escherichia coli O157:H7 is one of the most important foodborne pathogens that can persists in food and food‐related environments and subsequently produce biofilms. The efficacy of bacteriophage BPECO 19 was evaluated against three E. coli O157:H7 strains in biofilms. Biofilms of the three E. coli O157:H7 strains were grown on abiotic (stainless steel, rubber, and minimum biofilm eradication concentration [MBEC^TM] device) and biotic (lettuce) surfaces at different temperatures. The effectiveness of bacteriophage BPECO 19 in reducing preformed biofilms on these surfaces was further evaluated by treating the surfaces with a phage suspension (10⁸ PFU/mL) for 2 h. The results indicated that the phage treatment significantly reduced (P  < 0.05) the number of adhered cells in all the surfaces. Following phage treatment, the viability of adhered cells was reduced by ≥3 log CFU/cm², 2.4 log CFU/cm², and 3.1 log CFU/peg in biofilms grown on stainless steel, rubber, and the MBEC^TM device, respectively. Likewise, the phage treatment reduced cell viability by ≥2 log CFU/cm² in biofilms grown on lettuce. Overall, these results suggested that bacteriophages such as BPECO 19 could be effective in reducing the viability of biofilm‐adhered cells.     

Chlorine resistance of Listeria monocytogenes biofilms and relationship to subtype, cell density, and planktonic cell chlorine resistance

Strains of Listeria monocytogenes vary in their ability to produce biofilms. This research determined if cell density, planktonic chlorine resistance, or subtype are associated with the resistance of L. monocytogenes biofilms to chlorine. Thirteen strains of L. monocytogenes were selected for this research based on biofilm accumulation on stainless steel and rep-PCR subtyping. These strains were challenged with chlorine to determine the resistance of individual strains of L. monocytogenes. Planktonic cells were exposed to 20 to 80 ppm sodium hypochlorite in 20 ppm increments for 5 min in triplicate per replication, and the experiment was replicated three times. The number of tubes with surviving L. monocytogenes was recorded for each isolate at each level of chlorine. Biofilms of each strain were grown on stainless steel coupons. The biofilms were exposed 60 ppm of sodium hypochlorite. When in planktonic culture, four strains were able to survive exposure to 40 ppm of chlorine, whereas four strains were able to survive 80 ppm of chlorine in at least one of three tubes. The remaining five strains survived exposure to 60 ppm of chlorine. Biofilms of 11 strains survived exposure to 60 ppm of chlorine. No association of biofilm chlorine resistance and planktonic chlorine resistance was observed; however, biofilm chorine resistance was similar for strains of the same subtype. Biofilm cell density was not associated with chlorine resistance. In addition, biofilms that survived chlorine treatment exhibited different biofilm morphologies. These data suggest that chlorine resistance mechanisms of planktonic cells and biofilms differ, with planktonic chlorine resistance being more affected by inducible traits, and biofilm chlorine resistance being more affected by traits not determined in this study.     

Resistance of pathogenic bacteria on the surface of stainless steel depending on attachment form and efficacy of chemical sanitizers

Various bacteria including food spoilage bacteria and pathogens can form biofilms on different food processing surfaces, leading to potential food contamination or spoilage. Therefore, the survival of foodborne pathogens (Escherichia coli O157:H7, Listeria monocytogenes, Salmonella typhimurium, Staphylococcus aureus, Cronobacter sakazakii) in different forms (adhered cells, biofilm producing in TSB, biofilm producing at RH 100%) on the surface of stainless steel and stored at various relative humidities (RH 23%, 43%, 68%, 85%, and 100%) at room temperature for 5 days was investigated in this study. Additionally, the efficacy of chemical sanitizers (chlorine-based and alcohol-based commercial sanitizers) on inhibiting various types of biofilms of E. coli O157:H7 and S. aureus on the surface of stainless steel was investigated. The number of pathogens on the surface of stainless steel in TSB stored at 25 °C for 7 days or RH 100% at 25 °C for 7 days was significantly increased and resulted in the increase of 3 log₁₀ CFU/coupon after 1 day, and these levels were maintained for 7 days. When stainless steel coupons were stored at 25 °C for 5 days, the number of pathogens on the surface of stainless steel was significantly reduced after storage at RH 23%, 43%, 68%, and 85%, but not at 100%. When the bacteria formed biofilms on the surface of stainless steel in TSB after 6 days, the results were similar to those of the attached form. However, levels of S. aureus and C. sakazakii biofilms were more slowly reduced after storage at RH 23%, 43%, 68%, and 85% for 5 days than were those of the other pathogens. Formation of biofilms stored at RH 100% for 5 days displayed the highest levels of resistance to inactivation. Treatment with the alcohol sanitizer was very effective at inactivating attached pathogens or biofilms on the surface of stainless steel. Reduction levels of alcohol sanitizer treatment ranged from 1.91 to 4.77 log and from 4.35 to 5.35 log CFU/coupon in E. coli O157:H7 and S. aureus, respectively. From these results, the survival of pathogens contaminating the surfaces of food processing substrates such as stainless steel varied depending on RH and attachment form. Also, alcohol-based sanitizers can be used as a potential method to remove microbial contamination on the surfaces of utensils, cooking equipment, and other related substrates regardless of the microbial attached form.     

The adherence of Salmonella Enteritidis PT4 to stainless steel: the importance of the air-liquid interface and nutrient availability

Biofilm formation on stainless steel by Salmonella enterica serovar Enteritidis PT4 during growth in three different nutritious conditions was studied. The ability of micro-organisms to generate biofilms on the stainless steel surfaces was studied for a total period of 18 days at 20 degrees C, under three different experimental treatments: (i) growth medium (tryptone soy broth) was not refreshed (no further nutrients were provided) during the incubation period, (ii) growth medium was renewed every 2 days and (iii) growth medium was renewed every 2 days and at the same time the planktonic cells from the old medium were transferred to the new fresh medium. It was found that biofilms developed better and a higher number of adherent cells (ca. 10(7) cfu/cm(2)) were recovered when the organism was grown in periodically renewed nutrient medium than when the growth medium was not refreshed. Regardless of the availability of nutrients, biofilm development was better (range 2-3 logs greater) when coupons were not totally covered by the growth medium and part of the surface was exposed to the air-liquid interface, than when coupons were submerged in the medium. The results suggest that existence of air-liquid interface and adequate nutrient conditions provide the best environment for Salmonella Enteritidis PT4 biofilm formation on stainless steel. The possible role of stationary phase planktonic cells in biofilm development by sessile/attached microbial cells is also discussed.     

Effect of surface roughness and stainless steel finish on Listeria monocytogenes attachment and biofilm formation

The purpose of this study was to evaluate the effect of surface roughness (Ra) and finish of mechanically polished stainless steel (Ra = 0.26 +/- 0.05, 0.49 +/- 0.10, and 0.69 +/- 0.05 microm) and electropolished stainless steel (Ra = 0.16 +/- 0.06, 0.40 +/- 0.003, and 0.67 +/- 0.02 microm) on Listeria adhesion and biofilm formation. A four-strain cocktail of Listeria monocytogenes was used. Each strain (0.1%) was added to 200 ml of tryptic soy broth (TSB), and coupons were inserted to the mixture for 5 min. For biofilm formation, coupons with adhesive cells were incubated in 1:20 diluted TSB at 32 degrees C for 48 h. The experiment was performed by a randomized block design. Our results show that the level of Listeria present after 48 h of incubation (mean = 7 log CFU/cm2) was significantly higher than after 5 min (mean = 6.0 log CFU/cm2) (P < 0.01). No differences in initial adhesion were seen in mechanically finished (mean = 6.7 log CFU/cm2) when compared with electropolished stainless steel (mean = 6.7 log CFU/cm2) (P > 0.05). Listeria initial adhesion (values ranged from 5.9 to 6.1 log CFU/cm2) or biofilm formation (values ranged from 6.9 to 7.2 log CFU/cm2) was not significantly correlated with Ra values (P > 0.05). Image analysis with an atomic force microscope showed that bacteria did not colonize the complete surface after 48 h but were individual cells or grouped in microcolonies that ranged from 5 to 10 microm in diameter and one to three cell layers in thickness. Exopolymeric substances were observed to be associated with the colonies. According to our results, electropolishing stainless steel does not pose a significant advantage for food sanitation over mechanically finished stainless steel.     

Evaluation of a novel antimicrobial (lauric arginate ester) substance against biofilm of Escherichia coli O157:H7, Listeria monocytogenes,and Salmonella spp.

The purpose of this study was to evaluate the activity of a novel antimicrobial substance lauric arginate ester (LAE) against selected foodborne pathogens (Escherichia coli O157:H7, Listeria monocytogenes and Salmonella spp.) in biofilm. Minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) were determined and showed that LAE exhibits a strong antimicrobial activity. Biofilms were grown on abiotic stainless steel, rubber, MBEC biofilm device) and biotic (lettuce) surfaces. The efficacy of LAE (50, 100 and 200 ppm) at reducing the biofilm cells on these surfaces was examined by applying LAE for 2 h. Results revealed that LAE exhibited the reduction in biofilm bacteria up to 7 log CFU cm^?2, 3.5 log CFU cm^?2, 4.0 log CFU peg^?1 and 1.5 log CFU cm^?2 on stainless steel, rubber, MBEC and lettuce surfaces, respectively. Overall, these results suggest that LAE has been shown to be a potential alternative to control bacteria in biofilm mode in food industry.     

Fate of Enterobacter sakazakii attached to or in biofilms on stainless steel upon exposure to various temperatures or relative humidities

Survival of Enterobacter sakazakii dried on the surface of stainless steel and exposed to 43% relative humidity, as affected by temperature, was studied. Populations of E. sakazakii (7.4 to 8.6 log CFU per coupon) on coupons dried for 2 h at 22 degrees C decreased significantly (P < or = 0.05) at 4, 25, and 37 degrees C within 10, 3, and 1 day(s), respectively, but the pathogen remained viable for up to 60 days. At a given storage temperature and time, reductions were significantly greater when cells had been suspended in water rather than in infant formula before drying. Formation of biofilm by E. sakazakii on stainless steel immersed in M9 medium, which contains minimal concentrations of nutrients, and infant formula at 25 degrees C and subsequent survival of cells at 25 degrees C as affected by exposure to 23, 43, 68, 85, and 100% relative humidity were investigated. Some of the cells in these biofilms survived under all test relative humidities for up to 42 days. The overall order of survival as affected by relative humidity was 100 > 23 = 43 = 68 > 85% relative humidity, regardless of the medium in which the biofilm was formed. Reduction in viability of cells was significantly greater in biofilm that had formed in M9 medium than in biofilm formed in infant formula. Results indicate that infant formula provides protection for attached cells, as well as cells in biofilm, against lethality on exposure to desiccation. These results are useful when predicting the survival characteristics of E. sakazakii on stainless steel surfaces in processing and preparation kitchen environments.     

Effects of Zataria multiflora boiss essential oil,ultraviolet radiation and their combination on Listeria monocytogenes biofilm in a simulated industrial model

The objective of this study was to investigate the inhibitory effect of Zataria multiflora boiss essential oils (ZEOs), ultraviolet (UV) radiation and their combination against Listeria monocytogenes biofilm in a simulated industrial model (SIM). The effect of minimal inhibitory concentration (MIC) and sub‐MIC concentration of ZEOs, different contact time of UV and their combination was evaluated in a SIM on 6‐ and 12‐day‐old L. monocytogenes biofilm. In a SIM, 0.3% ZEOs were adequate to completely eliminate 6‐ and 12‐day‐old biofilm grown on stainless steel coupons. The population of viable L. monocytogenes biofilm cells under a 15‐ to 45‐min contact time of UV treatment declined significantly at 6‐ and 12‐day‐old biofilm. The combined effect of ZEO and UV showed antagonist effects. These findings indicated that in the single use, ZEO and UV revealed a suitable antilisteria biofilm activity, while combining them is not a promising method to remove listeria biofilms from stainless steel surfaces.     

Short communication: Evaluation of a sol-gel–based stainless steel surface modification to reduce fouling and biofilm formation during pasteurization of milk

Milk fouling and biofilms are common problems in the dairy industry across many types of processing equipment. One way to reduce milk fouling and biofilms is to modify the characteristics of milk contact surfaces. This study examines the viability of using Thermolon (Porcelain Industries Inc., Dickson, TN), a sol-gel-based surface modification of stainless steel, during thermal processing of milk. We used stainless steel 316L (control) and sol-gel-modified coupons in this study to evaluate fouling behavior and bacterial adhesion. The surface roughness as measured by an optical profiler indicated that the control coupons had a slightly smoother finish. Contact angle measurements showed that the modified surface led to a higher water contact angle, suggesting a more hydrophobic surface. The modified surface also had a lower surface energy (32.4 ± 1.4 mN/m) than the control surface (41.36 ± 2.7 mN/m). We evaluated the susceptibility of control and modified stainless steel coupons to fouling in a benchtop plate heat exchanger. We observed a significant reduction in the amount of fouled layer on modified surfaces. We found an average fouling weight of 19.21 mg/cm² and 0.37 mg/cm² on the control and modified stainless steel coupons, respectively. We also examined the adhesion of Bacillus and biofilm formation, and observed that the modified stainless steel surface offered greater resistance to biofilm formation. Overall, the Thermolon-modified surface showed potential in the thermal processing of milk, offering significantly lower fouling and bacterial attachment than the control surface.     

Salmonella enterica Enteritidis biofilm formation and viability on regular and triclosan-impregnated bench cover materials

Contamination of food contact surfaces by microbes such as Salmonella is directly associated with substantial industry costs and severe foodborne disease outbreaks. Several approaches have been developed to control microbial attachment; one approach is the development of food contact materials incorporating antimicrobial compounds. In the present study, Salmonella enterica Enteritidis adhesion and biofilm formation on regular and triclosan-impregnated kitchen bench stones (silestones) were assessed, as was cellular viability within biofilms. Enumeration of adhered cells on granite, marble, stainless steel, and silestones revealed that all materials were prone to bacterial colonization (4 to 5 log CFU/cm(2)), and no significant effect of triclosan was found. Conversely, results concerning biofilm formation highlighted a possible bacteriostatic activity of triclosan; smaller amounts of Salmonella Enteritidis biofilms were formed on impregnated silestones, and significantly lower numbers of viable cells (1 × 10(5) to 1 × 10(6) CFU/cm(2)) were found in these biofilms than in those on the other materials (1 × 10(7) CFU/cm(2)). All surfaces tested failed to promote food safety, and careful utilization with appropriate sanitation of these surfaces is critical in food processing environments. Nevertheless, because of its bacteriostatic activity, triclosan incorporated into silestones confers some advantage for controlling microbial contamination.     

Interactions in biofilms between Listeria monocytogenes and resident microorganisms from food industry premises

Twenty nine bacterial strains were grown as binary culture biofilms with Listeria monocytogenes to assess their influence on the settlement of the latter on stainless steel coupons. Most of the strains had been isolated from food processing plants after cleaning and disinfection and were tentatively identified by the APILAB Plus 3.3.3 database (bioMerieux). Sixteen of them decreased L. monocytogenes biofilm colony forming units (CFU) counts. Three strains, Bacillus sp. CCL 9 an unidentified Gram-positive strain CCL 59 and Pseudomonas fluorescens E9. 1, led to a 3-log difference in CFU counts between the pure L. monocytogenes biofilms and the mixed biofilms. Eleven strains had no effect and only four, Kocuria varians CCL 73, Staphylococcus capitis CCL 54, Stenotrophomonas maltophilia CCL 47 and Comamonas testosteroni CCL 24, had a positive effect, with a 0.5- to 1.0-log increase in the L. monocytogenes biofilm CFU counts. On its own, L. monocytogenes settled as single cells, but in binary biofilms, different spatial arrangements were observed: (i) with K. varians CCL 73, K. varians CCL 56 and S. capitis CCL 54, L. monocytogenes cells gathered around the microcolonies of the partner strain; (ii) with the two Gram-negative strains, C. testosteroni CCL 24 and CCL 25, L. monocytogenes cells formed its own microcolonies. No link could be found between the exopolysaccharide production capacity of the bacterial strains in pure-culture biofilms and their effect on the L. monocytogenes population in mixed biofilms. With one strain, C. testosteroni CCL 24, adding filter-sterilized supernatant from a pure-culture biofilm to a pure culture of L. monocytogenes increased the number of L. monocytogenes cells adhering to the stainless steel coupons and forming microcolonies. This study suggests that the "house flora" can have a strong effect on the likelihood of finding L. monocytogenes on inert surfaces.     

Bactericidal Effect of Calcium Oxide (Scallop‐Shell Powder) Against Pseudomonas aeruginosa Biofilm on Quail Egg Shell,Stainless Steel,Plastic, and Rubber

The aim of this study was to evaluate the bactericidal effect of calcium oxide (CaO) against Pseudomonas aeruginosa biofilms on quail eggshells and major egg contacting surfaces (stainless steel, plastic, and rubber). The samples were subjected to CaO treatments (0%, 0.01%, 0.05%, 0.10%, 0.15%, 0.20%, 0.25%, and 0.30%) for 1 min. All the CaO treatments significantly reduced P. aeruginosa biofilms on all tested surfaces as compared to controls. In comparison of biofilm stability, the strongest and most resistant biofilm was formed on eggshell against the CaO treatment, followed by rubber, stainless steel, and plastic. In evaluation of bactericidal effect, the largest reduction (3.16 log CFU) was observed in plastic even at the lowest concentration of CaO (0.01%), whereas the least reduction was found in eggshells, regardless of CaO concentration. In addition, stainless steel showed a significant reduction in biofilm formation at all concentrations except 0.10% to 0.15% CaO. At 0.30% CaO, the reduction of P. aeruginosa in biofilms on stainless steel, plastic, rubber, and eggshell were 5.48, 6.37, 4.87, and 3.14 log CFU/cm² (CFU/egg), respectively. Biofilm reduction after CaO treatment was also observed by field emission scanning electron microscopy (FE‐SEM). Based on the FE‐SEM images, we observed that P. aeruginosa biofilms formed compact aggregations on eggshell surfaces with CaO treatments up to 0.30%. More specifically, a 0.20% CaO treatment resulted in the reductions of 3 to 6 log CFU in all materials.     

Temperature and nutrient effects on Campylobacter jejuni attachment on multispecies biofilms on stainless steel

Campylobacterjejuni is a thermophilic microaerophilic pathogen that is commonly found in the intestinal tract of chickens. In this study, attachment of C. jejuni 1221gfp in biofilms on stainless steel was assessed at various temperatures and with reduced nutrients. Bacteria collected from a saline rinse of processed broiler chicken carcasses were used to form initial biofilms. The whole carcass rinse (WCR) biofilms were formed by incubation of the bacteria for 16 h at 13, 20, 37, and 42 degrees C on stainless steel coupons in tryptic soy broth (TSB). The resulting biofilms were stained with Hoechst 33258 stain and visualized by epifluorescence microscopy. WCR biofilms formed at 13 degrees C yielded the highest surface area coverage (47.6%), and the lowest coverage (2.1%) was attained at 42 degrees C. C. jejuni transformed to produce green fluorescent protein (gfp) was allowed to attach to the preexisting biofilms (from WCR incubated for 16 h) at each of the four temperatures, and attached cells were enumerated by visualization with an epifluorescence microscope. Attachment of C. jejuni 1221gfp did not significantly differ (P > 0.05) among the four temperatures. C. jejuni 1221gfp was cultured only from coupons with biofilms formed at 13 and 20 degrees C. For nutrient limitation experiments, WCR biofilms were allowed to grow in 10- and 50-fold diluted TSB at 20 and 37 degrees C for 48 h. The WCR biofilm surface area coverage (approximately 2%) was greater at 37 degrees C than at 20 degrees C for both TSB concentrations. C. jejuni 1221gfp was incubated with the WCR biofilm for 48 h at 20 and 37 degrees C, and attached cells were enumerated. Attachment was significantly higher (P < 0.05) only for the treatments with 1:10 TSB at 20 degrees C and 1:50 TSB at 37 degrees C. Under reduced-nutrient conditions, C. jejuni 1221gfp was cultured only from biofilms formed at 20 degrees C. Under the conditions tested, the attachment of C. jejuni 1221gfp on stainless steel and biofilms was affected by a combination of temperature and nutrient availability, but C. jejuni culturability was affected solely by temperature.