1，3－戊二烯阳离子聚合物链结构

采用以三氟甲基磺酸铝（（ＣＦ３ＳＯ３）３Ａｌ）为引发剂，二氯甲烷为溶剂的阳离子聚合方法制备了聚（１，３－戊二烯）。用ＩＲ、１ＨＮＭＲ和１３ＣＮＭＲ对聚合物结构进行了表征，并基于聚合物１ＨＮＭＲ谱对聚合物链结构进行了定量计算，聚合物环状和线型链结构分别占５４％和４６％，而线型链中的５种结构单元：反－１，４、顺－１，４、反－１，２、顺－１，２和３，４结构分别为２３％、１０％、１０％、１％和２％。     

RS高强Al－Zn－Mg－Cu系合金热处理温度与性能的关系

本文系统研究了ＲＳ高强Ａｌ－Ｚｎ－Ｍｇ－Ｃｕ系合金淬火温度、时效温度与性能关系，同时还分析了合金的微观组织。试验得出在４７０℃淬火峰时效（Ｔ６）的拉伸性能达到σ_ｂ＝７４０ＭＰａ，σ_（０．２）＝７０２ＭＰａ，δ_５＝１０％；双级时（Ｔ７３）可获得σ_ｂ＝６３３ＭＰａ，σ_（０．２）＝６０６ＭＰａ，δ_５＝１１．５％。合金的弥散强化相是Ｃｏ_２Ｎ_９、Ａｌ_３Ｚｒ，沉淀强化相为ＧＰ区、η＇和η。     

SOCl_2/TiCl_4引发体系的α-蒎烯/苯乙烯阳离子共聚反应研究 Ⅰ.SOCl_2/TiCl_4的共聚合性能研究

通过对ＳＯＣｌ２／ＴｉＣｌ４引发体系的α－蒎烯（Ｍ１）／苯乙烯（Ｍ２）共聚产物进行ＧＰＣ、１ＨＮＭＲ以及微臭氧化－薄层层析法等分析表征，证明该引发体系能在宽广的单体投料比范围内实现有效共聚。在确认仅生成共聚物的反应条件下，采用Ｍａｙｏ－Ｌｅｗｉｓ式积分法测得该体系在－３０℃、［ＳＯＣｌ２］＝２０ｍｍｏｌ／Ｌ、［ＴｉＣｌ４］＝６０ｍｍｏｌ／Ｌ、ＣＨ２Ｃｌ２溶剂中的竞聚率分别为苯乙烯ｒ２＝２．３１±０．１５；α－蒎烯ｒ１＝０．５２±０．０６。     

RS高强Al－Zn－Mg－Cu系合金热处理温度与性能的关系EI

本文系统研究了ＲＳ高强Ａｌ－Ｚｎ－Ｍｇ－Ｃｕ系合金淬火温度、时效温度与性能关系，同时还分析了合金的微观组织。试验得出在４７０℃淬火峰时效（Ｔ６）的拉伸性能达到σ_ｂ＝７４０ＭＰａ，σ_（０．２）＝７０２ＭＰａ，δ_５＝１０％；双级时（Ｔ７３）可获得σ_ｂ＝６３３ＭＰａ，σ_（０．２）＝６０６ＭＰａ，δ_５＝１１．５％。合金的弥散强化相是Ｃｏ_２Ｎ_９、Ａｌ_３Ｚｒ，沉淀强化相为ＧＰ区、η＇和η。     

一氧化碳和苯乙烯交替共聚物的合成与表征

利用乙酸钯和２，２′－联吡啶组成的催化剂体系催化一氧化碳和苯乙烯交替共聚合成出聚（１－氧代－２－苯基丙撑）（ＳＴＣＯ）。采用ＩＲ、ＮＭＲ、元素分析以及广角Ｘ光散射对该聚合物以表征。该共聚物晶体为单斜晶胞，晶胞参数为ａ＝１５．７×１０－１０ｍ，ｂ＝６．１７×１０－１０ｍ，ｃ＝７．４５×１０－１０ｍ，α＝９０．０°，β＝１０４．３°，γ＝９０．０°；晶胞体积为６９７．２×１０－３０ｍ３；空间点群为Ｐ２１／ｃ。此外，对该共聚物热降解进行了初步研究。     

稀土含氮黄长石固溶体R2Si3-xAlxO3+xN4-x的X射线衍射研究

用热压和无压烧结工艺，在１７００～１８００℃制备了含氮稀土黄长石固溶体Ｒ２Ｓｉ３－ｘＡｌｘＯ３＋ｘＮ４－ｘ（Ｒ＝Ｎｄ，Ｓｍ，ｘ＝０，０．３，０．６，１．０，１．２；Ｒ＝Ｄｙ，Ｙ，Ｘ＝０，０．３，０．６，１．０；Ｒ＝Ｙｂ，Ｘ＝０，０．３）利用Ｇｕｉｎｉｅｒ－Ｈａｅｇｇ照相法，光密度计在ＬＳ－１８和相应的程序系统（ＳＣＡＮ，ＳＣＡＮＰＩ和ＰＩＲＵＭ）给出了稀土黄长石的Ｘ射线衍射图谱，精密测定了具有不同     

Pb（Mg_（1／2）W_（1／2））O_3－PbTiO_3－PbZrO_3陶

研究了Ｐｂ（Ｍｇ＿（１／２）Ｗ＿（１／２））Ｏ＿３－ＰｂＴｉＯ＿３－ＰｂＺｒＯ＿３陶瓷的化学不均匀性和介电行为。ＥＤＳ分析得到：体系中存在富Ｗ和富Ｚｒ、Ｔｉ的两相，平均分子式为：Ⅰ相（富Ｗ相）：Ｐｂ（Ｍｇ＿（０．２７０）Ｗ＿（０．３６７）Ｔｉ＿（０．１７８）Ｚｒ＿（０．１８２））Ｏ＿（３．０９１）；Ⅱ相（富Ｚｒ、Ｔｉ相）：Ｐｂ（Ｍｇ＿（０．１０９）Ｗ＿（０．１８７）Ｔｉ＿（０．２０４）Ｚｒ＿（０．３４０）Ｏ＿（２．７５８）。两相居里点分别为：Ｔ＿（ｃＩ）＜－６５℃，Ｔ＿（ｃＩ）＝１０５℃，图像处理得到两相的面积比为：Ｓ＿Ⅰ＝６８．６４％，Ｓ＿Ⅱ＝３１．３６％。按３－３模型复合，得到两相体积比为：７６％、２４％。复合相的介电性能符合Ｘ７Ｒ要求，｜ＴＣＣ｜≤１２％，且介－温曲线与原材料有相同的规律。     

Lewis酸引发的1，3－戊二烯阳离子聚合

以ＡｌＣｌ_３、ＢＦ_３·ＯＥｔ_２、ＴｉＣｌ_４和ＡｌＢｒ_３等Ｌｅｗｉｓ酸为引发剂，在不同溶剂中（正己烷、二氯甲烷、甲苯）于３０℃引发１，３－戊二烯阳离子聚合。实验结果表明，ＡｌＣｌ_３和ＢＦ_３·ＯＥｔ_２显示出较高的催化活性，ＡｌＣｌ_３引发的聚合反应得到的聚合物具有较高的分子量，但聚合反应过程中总是伴随交联产物的生成。用甲苯作溶剂时交联反应可以被抑制。ＩＲ和￣１ＨＮＭＲ结果表明，甲苯作为聚合反应的链转移剂参与了链转移反应。     

掺杂BaCeO3和SrCeO3在氧,氢及水气气氛下的电导性能

掺杂碱土金属铈酸盐系统：ＭＣｅ１－ｘＲｘＯ３－ｘ／２（Ｍ＝Ｂａ，Ｓｒ；Ｒ＝Ｙｂ，Ｙ，Ｇｄ，Ｌａ；ｘ＝０．０１～０．１０）可由固相反应制得单相化合物，Ｘ射线衍射分析表明，掺杂元素及掺杂量对掺杂ＢａＣｅＯ３和ＳｒＣｅＯ３的晶体结构影响不大。用复数阻抗谱研究了在氧、氢、水气气氛下的电导性能。在各种气氛下ＭＣｅ０．９５Ｙｂ０．０５Ｏ２．９７５（Ｍ＝Ｂａ，Ｓｒ）的电导率最大。根据测试结果，结合缺陷化学理论讨     

Bi_2O_3－PbO二元系相图

本文用差热分析（ＤＴＡ）和Ｘ射线衍射（ＸＲＤ）技术研究了Ｂｉ_２Ｏ_３－ＰｂＯ二元系相平衡．在该二元系中存在一个结构为体心立方，点阵常数ａ＝０．４３５０ｎｍ的新化合物，化合物的组成为２Ｂｉ_２Ｏ_３．３ＰｂＯ．该化合物是６Ｂｉ_２Ｏ_３·ＰｂＯ和α固溶体在５９０℃包晶反应形成的．温度为６１５℃，组成为Ｂｉ_２Ｏ_３：ＰｂＯ＝３：７发生共晶反应Ｌ６Ｂｉ_２Ｏ_３．ＰｂＯ＋α６１５℃时Ｂｉ_２Ｏ_３在。相中的最大固溶度大约是１０ｍｏｌ％．温度为７０２℃，Ｂｉ_２Ｏ_３：ＰｂＯ＝１９：１存在共析反应Ｃ_ｓｓβ＋６Ｂｉ_２Ｏ_３．ＰｂＯ高温型），６Ｂｉ_２Ｏ_３．ＰｂＯ高温型）的分解温度为７２０℃．     

Photostriction of CH3NH3PbBr3 Perovskite Crystals

Organic–inorganic hybrid perovskite materials exhibit a variety of physical properties. Pronounced coupling between phonon, organic cations, and the inorganic framework suggest that these materials exhibit strong light–matter interactions. The photoinduced strain of CH₃NH₃PbBr₃ is investigated using high‐resolution and contactless in situ Raman spectroscopy. Under illumination, the material exhibits large blue shifts in its Raman spectra that indicate significant structural deformations (i.e., photostriction). From these shifts, the photostrictive coefficient of CH₃NH₃PbBr₃ is calculated as 2.08 × 10^?8 m² W^?1 at room temperature under visible light illumination. The significant photostriction of CH₃NH₃PbBr₃ is attributed to a combination of the photovoltaic effect and translational symmetry loss of the molecular configuration via strong translation–rotation coupling. Unlike CH₃NH₃PbI₃, it is noted that the photostriction of CH₃NH₃PbBr₃ is extremely stable, demonstrating no signs of optical decay for at least 30 d. These results suggest the potential of CH₃NH₃PbBr₃ for applications in next‐generation optical micro‐electromechanical devices.     

(La2/3Ca1/3)(Mn(3-x)/3)Fex/3)O3体系磁电阻行为的研究

通过系统地测量（La_2/3Ca_1/3）（Mn_{（3-x）／3}Fe_x／3）O₃（x＝0、0.1、0．2、0．3的体系样品的电阻率-温度关系以及一定温度下磁电阻率与磁场的关系,发现随x的变化其磁电阻率峰和电阻率峰均发生位移,磁电阻率峰值增大,并伴生磁电阻率峰展宽效应．作者认为由于Fe的替代,引起体系中Mn³⁺／Mn⁴⁺比率及磁矩的变化,加之外场对磁有序结构的调制作用,从而影响了Mn³⁺－O^－Mn⁴⁺的双交换作用,最终导致磁电阻行为发生变化．     

Constitution of the Ni3Cr-Ni3Al-Ni3W system

Isothermal sections of the Ni-Cr-Al-W system have been investigated at 75 at % Ni and temperatures of 1523 and 1273 K, by means of phase compositional analysis, X-ray diffraction and microscopical examination. The alloys studied lay in the range 2.5 to 10 at % Cr, 12.5 to 20 at% Al, 2.5 to 6.25 at % W, The phases formed were, and the bcc solid solution based on tungsten (designated ₂). The maximum extent of the region was found to be 3 at % each of chromium and tungsten. Preferential partitioning of tungsten to occurred. Study of an Ni-10Cr-12.5Al-2.5W alloy aged at 1273 and 1073 K, after quenching from 1573 K, showed that changes in and compositions and lattice parameters occur as a function of ageing time.     

PbZrO3-CdTiO3 solid solutions

The structural, nonlinear optical, and dielectric properties of (1-x)PbZrO₃ ·xtCdTiO₃ solid solutions were studied. The phase relations in the composition rangesx = 0–0.3 and 0.85-1.0 were established. The results suggest that the ferrielectric ordering in CdTiO₃ persists up to 730 K.     

3 Cr3 Mo3 VNb 在热冲孔中的应用研究

高合金钢热冲孔冲头寿命关系到模具与产品成本、生产效率、自动化设备的使用,因此,应注重冲头的选材、材料制备与冲头制造工艺。 用 3 Cr3Mo3 VNb 作为高合金钢热冲孔冲头,为提高模具寿命,在材料制备上,优化了成分,采用电渣重熔冶炼,减少杂质,毛坯锻造两次,用大锻造比锻造,冲头热处理用真空炉,三次回火,热处理硬度取 HRC42 ~ 46 ,冲头表面处理采用镀铬工艺,开展了热冲孔工艺试验。 结果表明,用3 Cr3Mo3 VNb 可使冲孔冲头寿命平均达到 800 件以上。     

Phase equilibria in the system LaMnO3 + δ-SrMnO3-LaFeO3-SrFeO3 − d

We have revealed the formation of a continuous series of orthorhombic LaMn_{1 ? y} Fe_yO₃ solid solutions (0<y<1); La_{1 ? x} Sr_xFeO₃ solid solutions in the composition range 0 < x ≤ 0.8, with an orthorhombic structure at 0 < x ≤ 0.6 and a cubic structure at 0.6 < x ≤ 0.8; and a tetragonal SrMn_{1 ? y} Fe_yO₃ phase in the range 0.6 ≤ y ≤ 1. The composition stability limits of the perovskite phase La_{1 ? x} Sr_xMn_{1 ? y} Fe_yO₃ have been determined, and the 1100°C isotherm of the La₂O₃-SrO-Mn₃O₄-Fe₂O₃ system in air has been constructed.     

Multicolor up-conversion emissions of Tm3+/Er3+/Yb3+ tri-doped YF3 phosphors

Tm3+/Er3+/Yb3+ tri-doped yttrium fluoride (YF3) phosphors were prepared by a facile hydrothermal method. X-ray topographic analysis found that the phosphors were crystallized products. Their sizes and morphologies were characterized by scanning electron microscopy (SEM, Hitachi S-4800), which indicated that most of the YF3 phosphors were hundreds of nanometers in size. Up-conversion (UC) spectra were recorded under 980-nm diode laser excitation at room temperature with a fluorescence spectrometer (Hitachi F-4500). Plenty of UC emissions of Tm3+ and Er3+ were observed from ultraviolet to red. For Tm3+ ions, a five-photon process (approximately 291 nm and approximately 347 nm), a four-photon process (approximately 362 nm and approximately 452 nm), and a three-photon process (approximately 475 nm) were identified in the UC spectra. The UC emissions from the Er3+ were: approximately 380 nm, approximately 408 nm, approximately 521 nm, approximately 537 nm, and approximately 652 nm. Therefore, cyan-white light can be observed by the naked eye at 980-nm excitation, even under low excitation power density. By comparing the UC spectra of the phosphors annealed at different temperatures, we found that the intensity of the UC luminescence increased as annealing temperature increased. Furthermore, the spectral dependencies on Tm3+ doped concentrations were studied. The energy transfer processes and fluorescence dynamics in the tri-doped system are currently being investigated.