An interleaved high step‐up DC‐DC converter with double boost paths

This paper proposed a novel high step‐up converter with double boost paths. The circuit uses two switches and one double‐path voltage multiplier cell to own the double boost and interleaved effects simultaneously. The voltage gain ratio of the proposed DC‐DC converter can be three times the ratio of the conventional boost converter such that the voltage stress of the switch can be lower. The high step‐up performance is in accordance with only one double‐path voltage multiplier cell. Therefore, the number of diodes and capacitors in the proposed converter can be reduced. Furthermore, the interleaved property of the proposed circuit can reduce the losses in the rectifier diode and capacitor. The prototype circuit with 24‐V input voltage, 250‐V output voltage, and 150‐W output power is experimentally realized to verify the validity and effectiveness of the proposed converter. Copyright © 2014 John Wiley & Sons, Ltd.     

A new single‐phase high‐power‐factor converter with buck and buck–boost hybrid operation

In recent years, a wide variety of high‐power‐factor converter schemes have been proposed to solve the harmonic problem. The schemes are based on conventional boost, buck, or buck–boost topology, and their performance, such as output voltage control range in the boost and buck topology or efficiency in the buck–boost topology, is limited. To solve this, the authors propose a single‐phase high‐power‐factor converter with a new topology obtained from a combination of buck and buck–boost topology. The power stage performs the buck and buck–boost operations by a compact single‐stage converter circuit while the simple controller/modulator appropriately controls the alternation of the buck and buck–boost operation and maintains a high‐quality input current during both the buck and buck–boost operations. The proposed scheme results in a high‐performance rectifier with no limitation of output voltage control range and a high efficiency. In this paper, the principle and operation of the proposed converter scheme are described in detail and the theory is confirmed through experimental results obtained from 2‐kW prototype converter. © 2000 Scripta Technica, Electr Eng Jpn, 131(3): 91–100, 2000     

Analysis and implementation of a high‐efficiency zero‐voltage‐zero‐current‐switching DC–DC converter

A high‐efficiency zero‐voltage‐zero‐current‐switching DC–DC converter with ripple‐free input current is presented. In the presented converter, the ripple‐free boost cell provides ripple‐free input current and zero‐voltage switching of power switches. The resonant flyback cell provides zero‐voltage switching of power switches and zero‐current switching of the output diode. Also, it has a simple output stage. The proposed converter achieves high efficiency because of the reduction of the switching losses of the power switches and the output diode. Detailed analysis and design of the proposed converter are carried out. A prototype of the proposed converter is developed and its experimental results are presented for validation. Copyright © 2011 John Wiley & Sons, Ltd.     

Design and analysis of power‐CMOS‐gate‐based switched‐capacitor DC–DC converter with step‐down and step‐up modes

A unified multi‐stage power‐CMOS‐transmission‐gate‐based quasi‐switched‐capacitor (QSC) DC–DC converter is proposed to integrate both step‐down and step‐up modes all in one circuit configuration for low‐power applications. In this paper, by using power‐CMOS‐transmission‐gate as a bi‐directional switch, the various topologies for step‐down and step‐up modes can be integrated in the same circuit configuration, and the configuration does not require any inductive elements, so the IC fabrication is promising for realization. In addition, both large‐signal state‐space equation and small‐signal transfer function are derived by state‐space averaging technique, and expressed all in one unified formulation for both modes. Based on the unified model, it is all presented for control design and theoretical analysis, including steady‐state output and power, power efficiency, maximum voltage conversion ratio, maximum power efficiency, maximum output power, output voltage ripple percentage, capacitance selection, closed‐loop control and stability, etc. Finally, a multi‐stage QSC DC–DC converter with step‐down and step‐up modes is made in circuit layout by PSPICE tool, and some topics are discussed, including (1) voltage conversion, output ripple percentage, and power efficiency, (2) output robustness against source noises and (3) regulation capability of converter with loading variation. The simulated results are illustrated to show the efficacy of the unified configuration proposed. Copyright © 2003 John Wiley & Sons, Ltd.     

Implementation and design of high‐power fast charger for lithium‐ion battery pack

The high‐power fast charger (HPFC) incorporating a power stage with a controlling loop is presented in this paper. A power stage is composed of an inter‐leaved boost power factor correction and a DC‐DC full‐bridge phase‐shifted (FBPS) converter, and that the HPFC can supply a constant‐voltage (CV) or a constant‐current (CC) power to charge a secondary lithium‐ion battery pack. In addition, the ripple current can be reduced due to the DC‐DC FBPS converter combines with the current‐doubler rectifier at HPFC's output side. Also, the controlling loop is equipped with a voltage compensator and a current compensator, and this design is for the sake of HPFC, which can either operate in CV or CC output mode. Moreover, the shut‐down situation will be prevented by proposed bi‐phase charging controller, when the charging current is adjusted from the fist CC level to the second CC level. Analysis and design considerations of the proposed circuits are presented in details. Experimental results agree well with the theoretical predictions and confirm the validity of the proposed approach. Copyright © 2013 John Wiley & Sons, Ltd.     

一种电源-电容串联型直流变换器

提出了一种电源-电容串联型直流变换器,这种拓扑结构可以同时为两路直流电源升压,并且有效降低了半导体器件的电压与电流应力。与双路Boost型直流变换器相比,该电源-电容串联型直流变换器在不增加功率器件数量的前提下,显著降低了半导体器件的电压与电流应力,适用于分布式光伏并网逆变器的直流变换级。主要涉及该直流变换器的运行方式、电压与电流应力分析、效率对比,并通过实验验证了该直流变换器的可行性。     

High‐power‐factor single‐switch AC to DC converter for LED lighting

In this paper, we report a novel single‐switch AC to DC step‐down converter suitable for light emitting diodes. The proposed topology has a buck and a buck–boost converter. The circuit is designed to operate in the discontinuous conduction mode in order to improve the power factor. In this topology, a part of the input power is connected to the load directly. This feature of the proposed topology increases the efficiency of power conversion, improves the input power factor, produces less voltage stress on intermediate stages, and reduces the output voltage in the absence of a step‐down transformer. The theoretical analysis, design procedure, and performance of the proposed converter are verified by simulation and experiment. A 36 V, 60 W prototype has been built to demonstrate the merits of this circuit. © 2017 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Pulse current regenerative resonant snubber‐assisted two‐switch flyback‐type ZVS PWM DC‐DC converter

In this paper, a two‐switch high‐frequency flyback transformer‐type zero voltage soft‐switching PWM DC‐DC converter using IGBTs is proposed. Effective applications for this power converter can be found in auxiliary power supplies of rolling stock transportation and electric vehicles. This power converter is basically composed of two active power switches and a flyback high‐frequency transformer. In addition to these, two passive lossless snubbers with power regeneration loops for energy recovery, consisting of a three‐winding auxiliary high‐frequency transformer, auxiliary capacitors and diodes are introduced to achieve zero voltage soft switching from light to full load conditions. Furthermore, this power converter has some advantages such as low cost circuit configuration, simple control scheme, and high efficiency. Its operating principle is described and to determine circuit parameters, some practical design considerations are discussed. The effectiveness of the proposed power converter is evaluated and compared with the hard switching PWM DC‐DC converter from an experimental point of view, and the comparative electromagnetic conduction and radiation noise characteristics of both DC‐DC power converter circuits are also depicted. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(3): 74–81, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20081     

Three‐stage multiphase‐switched‐capacitor boost DC‐AC inverter

A closed‐loop scheme of a three‐stage multiphase‐switched‐capacitor boost DC‐AC inverter (MPSCI) is proposed by combining the multiphase operation and sinusoidal‐pulse‐width‐modulation (SPWM) control for low‐power step‐up DC‐AC conversion and regulation. In this MPSCI, the power unit contains two parts: MPSC booster (front) and H‐bridge (rear). The MPSC booster is suggested for an inductor‐less step‐up DC‐DC conversion, where three voltage doublers in series are controlled with multiphase operation for boosting voltage gain up to 2³ = 8 at most. The H‐bridge is employed for DC‐AC inversion, where four solid‐state switches in H‐connection are controlled with SPWM to obtain a sinusoidal AC output. In addition, SPWM is adopted for enhancing output regulation not only to compensate the dynamic error, but also to reinforce robustness to source/loading variation. The relevant theoretical analysis and design include: MPSCI model, steady‐state/dynamic analysis, voltage conversion ratio, power efficiency, stability, capacitance selection, total harmonic distortion (THD), output filter, and closed‐loop control design. Finally, the closed‐loop MPSCI is simulated, and the hardware circuit is implemented and tested. All the results are illustrated to show the efficacy of the proposed scheme. Copyright © 2011 John Wiley & Sons, Ltd.     

A new parallel ZVS converter with less power switches and low current stress components

A new direct current (DC)/DC converter with parallel circuits is presented for medium voltage and power applications. There are five pulse‐width modulation circuits in the proposed converter to reduce current stress at low voltage side for high output current applications. These five circuits share the same power switches in order to reduce switch counts. To reduce the converter size, conduction loss, and voltage stress of power semiconductors, the series connections of power metal‐oxide‐semiconductor field‐effect transistor (MOSFET) with high switching frequency instead of insulated gate bipolar transistor (IGBT) with low switching frequency are adopted. Thus, the voltage stress of MOSFETs is clamped at half of input voltage. The switched capacitor circuit is adopted to balance input split capacitor voltages. Asymmetric pulse‐width modulation scheme is adopted to generate the necessary switching signals of MOSFETs and regulate output voltage. Based on the resonant behavior at the transition interval of power switches, all MOSFETs are turned on under zero voltage switching from 50% load to 100% load. The circuit configuration, operation principle, converter performance, and design example are discussed in detail. Finally, experimental verifications with a 1.92 kW prototype are provided to verify the performance of the proposed converter. Copyright © 2015 John Wiley & Sons, Ltd.     

A switch‐mode boost DC–DC converter for IR‐drop compensation of charging cable

A switch‐mode boost DC–DC converter has been developed to compensate for the IR‐drop because of the finite resistance of a charging cable. The boost ratio of the DC–DC converter is adaptively controlled by an IR‐drop sensing circuit to provide the required voltage level to a battery charger regardless of the cable resistance. Implemented in a 0.18 µm BCDMOS process, the IR‐drop compensating switch‐mode boost DC–DC converter occupies 6.2 mm² active area and shows the 93.2% peak efficiency. The proposed IR‐drop compensating boost converter can be applied to compensate for the IR‐drop of any type of charging cables. Copyright © 2014 John Wiley & Sons, Ltd.     

一种单位功率因数单相AC/DC变换器的研究

根据传统升压式AC/DC变换器的功率因数校正原理,讨论了两种升压电感置于整流桥前的单相AC/DC变换器,在对其进行仿真分析之后认为,它们的控制原理可以保持不变,其控制电路也可通过适当改进传统单相AC/DC变换器的控制电路而得到,而且因结构紧凑而便于功率集成。最后给予了物理实现,功率达到2kW以上,仿真结果与实验结果验证了理论分析的正确性。     

一种高增益软开关直流变换器的分析与设计

在无需变压器隔离的光伏并网发电系统中,在光伏电池和并网逆变器之间须采用非隔离DC/DC变换器完成高增益变换.为此,提出了一种高增益软开关直流变换器,在相同电压增益条件下,其相对于传统升压变换器具有占空比更低、开关损耗更小、电压应力更低的优势.在分析变换器工作原理的基础上,对其性能进行了详细分析,最后搭建了一台48 V输...     

High‐efficiency transformerless buck–boost DC–DC converter

A novel high‐efficiency transformerless buck–boost DC–DC converter is proposed in this paper. The presented converter voltage gain is higher than that of the conventional boost, buck–boost, CUK, SEPIC and ZETA converters, and high voltage gain can be obtained with a suitable duty cycle. The voltage stress across the power switch is low. Hence, the low on‐state resistance of the power switch can be selected to decrease conduction loss of the switch and improve efficiency. The input current ripple in the presented converter is low. The principle of operation and the mathematical analyses of the proposed converter are explained. The validity of the presented converter is verified by the simulation results in PSCAD/EMTDC software and experimental results based on the prototype circuit with 250 W and 40 kHz. Copyright © 2017 John Wiley & Sons, Ltd.     

Performance Verification of High‐Efficiency PV Power Conditioner Integrated with SiC MOSFETs and Cooperative Control Method

A high conversion efficiency is always required for photovoltaic power conditioners to utilize PV‐generated DC power with minimal loss. The cooperative control method has been developed as one of the control methods that improves the conversion efficiency, which is applicable to nonisolated power conditioners consisting of a boost converter and an inverter. In the cooperative control method, the boost converter creates part of the AC voltage waveform, and either the boost converter or inverter performs switching only during a required period. Therefore, it has the advantage of reducing switching losses. In this paper, we present a study of a cooperative‐control‐type power conditioner assuming its use in grid‐connected operation and the results of a performance verification of prototype power conditioner. A microcontroller is used for cooperative control. The experimental results show that the prototype power conditioner integrated with SiC MOSFETs and the cooperative control method achieves an efficiency of 97.4% at an output of 5.5 kW.     

Application of Improved Bridgeless Power Factor Correction Based on One-cycle Control in Electric Vehicle Charging System

In view of high power factor and high efficiency requirements in electric vehicle charging systems, an improved bridgeless power factor correction based on one-cycle control in the pre-regulator is proposed in this article. First, the working principle of a boost power factor correction converter and a one-cycle control strategy are analyzed. Second, a simulation model is built by MATLAB/Simulink (The MathWorks, Natick, Massachusetts, USA), and an experimental plant is developed by electron devices. Finally, simulation and experiment results show that the power factor of the front-end circuit in charging system amounts to more than 0.99, and the total harmonic distortion of current is less than 4%. The efficiency is greatly improved, and pre-stabilized output voltage is achieved. The proposed topology can facilitate the design of the DC/DC circuit in the final stage.     

A ZVS‐ZCS phase shift full bridge DC‐DC converter with secondary‐side control for battery charging applications

The output power requirement of battery charging circuits can vary in a wide range, hence making the use of conventional phase shift full bridge DC‐DC converters infeasible because of poor light load efficiency. In this paper, a new ZVS‐ZCS phase shift full bridge topology with secondary‐side active control has been presented for battery charging applications. The proposed circuit uses 2 extra switches in series with the secondary‐side rectifier diodes, operating with phase shift PWM. With the assistance of transformer's magnetizing inductance, the proposed converter maintains zero voltage switching (ZVS) of the primary‐side switches over the entire load range. The secondary‐side switches regulate the output voltage/current and perform zero current switching (ZCS) independent of the amount of load current. The proposed converter exhibits a significantly better light load efficiency as compared with the conventional phase shift full bridge DC‐DC converter. The performance of the proposed converter has been analyzed on a 1‐kW hardware prototype, and experimental results have been included.     

一种新型的压电陶瓷驱动电源研究

为了满足压电陶瓷对驱动电源纹波小的要求,基于两路交错并联电源电路的研究,提出了四路交错并联boost 驱动电源电路的拓扑.四路交错并联boost驱动电源电路中的四条支路可减小输入电流纹波,同时还可减小输出电压纹波,可满足压电陶瓷对驱动电源高稳定性、低纹波、高效率的要求.分析了四路交错并联boost电源电路的基本原理,通...     

A power efficient buck‐boost converter by reusing the coil inductor for wireless bio‐implants

In this paper, a buck‐boost converter circuit for wireless power transfer via inductive links in bio‐implantable systems is presented. The idea is based on reusing the power receiver coil to design a regulator. This method employs five switches to utilize the coil inductor in a frequency other than the power‐receiving signal frequency. Reusing the coil inductor decreases the on‐chip regulator area and makes it suitable for bio‐implants. Furthermore, in the proposed technique, the regulator efficiency becomes almost independent of the coil receiving voltage amplitude. The proposed concept is employed in a buck‐boost regulator, and simulation results are provided. For a 10 MHz received signal with the amplitude variation within 3 ~ 6 V and with the converter switching rate of 200 kHz, the achieved maximum efficiency is 78%. The proposed regulator can also deliver 10 μA to 4 mA to its load while its output voltage varies from 0.6 to 2.3 V. Simulations of the proposed converter are performed in Cadence‐Spectre using TSMC 0.18 μm CMOS technology. Copyright © 2017 John Wiley & Sons, Ltd.     

光伏直流升压场站并网整体协同低电压穿越控制策略

光伏直流升压汇集场站中,光伏列阵经DC/DC升压后汇集,再由DC/AC换流站逆变后接入交流电网。对于多个光伏直流升压场站并网系统,并网DC/AC换流站输出无功电流大小受自身容量与端口电压跌落程度影响,在协调机制不明确情况下,无功整定困难,靠近故障的场站存在脱网风险。为此,在分析各DC/AC换流站无功出力对端口电压影响的基础上,提出了光伏直流升压场站并网系统整体协同低电压穿越控制策略。进入低穿后,DC/AC换流站检测本地端口电压,立即向电网注入无功进行支撑;总控站利用通信获知各换流站的端口电压,进而协调各换流站的无功电流输出额度。同时,在分工况细化协调机制的基础上,对DC/AC换流站无功电流输出进行通用化整定。仿真结果表明,所提控制策略在交流电网发生故障时,能有效协调各DC/AC换流站进行无功补偿,提高系统整体低电压穿越能力。