Mechanisms of the Allotropic Transition of Sn

The mechanisms of -Sn nucleation on foreign seeds, including metastable ones, are considered. Based on earlier and new experimental data for induction times of -Sn nucleation from 10² to 10¹¹ s, it is suggested that spontaneous -Sn nucleation is impossible because of kinetic hindrances in the solid phase.     

On dual solutions occurring in mixed convection in a porous medium

Summary The dual solutions to an equation, which arose previously in mixed convection in a porous medium, occuring for the parameter in the range 0 < < ₀ are considered. It is shown that the lower branch of solutions terminates at =0 with an essential singularity. It is also shown that both branches of solutions bifurcate out of the single solution at =₀ with an amplitude proportional to (₀-)^1/2. Then, by considering a simple time-dependent problem, it is shown that the upper branch of solutions is stable and the lower branch unstable, with the change in temporal stability at =₀ being equivalent to the bifurcation at that point.     

Flux-line cutting in type II superconductors

Experimental evidence for flux-line cutting in superconductors (intersection and cross-joining of singly quantized vortices) is briefly reviewed. The interaction energy between two straight vortices tilted at an angle ( 0)is then shown to be finite in the London model, i.e., in the limit of vanishing core radius. Next, the activation energy and maximum interaction force are calculated for the vortices in an analytic approximation to the Ginzburg-Landau theory. Here two competing interactions determine the behavior. Electromagnetic repulsion (0 < < /2) varies as cos and decays over distances scaled by the penetration depth , while core attraction is independent of and varies over distances scaled by the coherence length . The force is always repulsive at large flux-line separation (0 < < /2) and its maximum decreases rapidly as decreases, so that flux-line cutting isexpected to be more probable in low- materials. The calculations provide a basis for explaining longitudinal flux-flow resistance as well as some intriguing magnetization behavior in the same configuration.This work was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Materials Sciences Division, and by the Deutsche Forschungsgemeinschaft.On leave from Max-Planck-Institut für Metallforschung, Institut für Physik, Stuttgart, West Germany.On leave from New University of Ulster, Coleraine, Northern Ireland.     

Eutectoid decomposition mechanisms in hypoeutectoid Ti-X alloys

A TEM study has been made of the bainite reaction in five hypoeutectoid Ti-X alloys, where X was successively cobalt, chromium, copper, iron and nickel. Rational orientation relationships were demonstrated amongst eutectoid , eutectoid intermetallic compound and the matrix in Ti-Ni, Ti-Co and Ti-Cr. Formation of Ti₂Co at : boundaries was observed. Eutectoid in bainite was found to be slightly misoriented with respect to proeutectoid , indicating that it is separately nucleated, perhaps sympathetically, rather than the result of the continued growth of proeutectoid . Eutectoid Ti₂Co and Ti₂Cu crystals in bainite were approximately equiaxed whereas Ti-Cr₂ crystals were elongated, a result ascribed to a ledge height-to-spacing ratio / at intermetallic compound crystal: boundaries approaching that of eutectoid (: boundaries in Ti-Cr but not in the other two systems. In the Ti-Fe alloy, eutectoid and eutectoid TiFe were directly observed to have ledged interphase boundaries with their matrix, but with different inter-ledge spacings and growth directions. Observation of pearlite lamellae growing normal to the broad faces of proeutectoid plates in the Ti-Ni alloy indicates that this mode of eutectoid decomposition, like that of bainite, can develop from partially coherent interphase boundaries. The suggestion was offered that pearlite forms when approachesh at the nucleating proeutectoid : interface and that bainite develops when h at this interface.     

γ ? α2 Phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%)

The ₂ phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%) alloy has been studied by analytical electron microscopy. ₂ and phases were found at grain boundaries. ₂ layers that suspended in layers and interfacial ledge higher than 2d ₍₁₁₁₎ at /₂ interfaces were observed in the lamellar grains. These facts indicated that ₂ phase transformation and dynamic recrystallization have occurred during high temperature stress rupture deformation. It can be concluded that deformation induced ₂ phase transformation and dynamic recrystallization resulted in the presence of particles at grain boundaries. A structural and compositional transition area between deformation-induced ₂(or ) and its adjacently original (or ₂) phases was found by HREM and EDS and is suggested as a way to transform between and ₂ phase during high temperature stress rupture deformation. The transition area was formed by slide of partial dislocations on close-packed planes and diffusion of atoms.     

Anisotropic grain growth of R-α-sialon (R = Nd and Er)

Two R--sialon (R_0.6Si_9.3Al_2.7O_0.9N_15.1, R=Nd and Er) compositions were first fired at 1750°C/25 min and 1650°C/2 h respectively for completion of the phase transformation. Elongated -sialon grain morphology was developed in both samples after being re-fired at 1800°C for different periods of time. The growth in width of R--sialon grains is controlled by diffusion in the liquid, while the length growth tends to be interfacial reaction controlled. The anisotropic growth of R--sialon is attributed to the large difference in the growth rate constant between the length and the width directions of the grain.     

Mössbauer studies of α″-Fe16N2 and α′-Fe8N films

Conversion-electron Mössbauer spectra of epitaxial -Fe₁₆N₂ and -Fe₈N films have been studied and their differences are discussed in detail. The Mössbauer spectrum of -Fe₁₆N₂ can be decomposed into three subspectra, which correspond to the 4d, 8h and 4c sites. The Mössbauer spectrum of -Fe₈N can be fitted using four spectra based on a nitrogen-atom-random-distribution model. The average hyperfine field is larger (3%) for -Fe₁₆N₂ than for -Fe₈N, which is approximately consistent with a 4.1% enhancement of the magnetic moments for -Fe₁₆N₂. The iron moments tend to locate in the film plane for -Fe₁₆N₂ and to arrange perpendicularly to the film plane for -Fe₈N.     

Morphological evolution of α/γ interface in Fe-Mn-Al alloy

Series of multiphase diffusion couples were assembled with various terminal and alloys in a Fe-Mn-Al system. These couple series were employed to investigate the development of diffusion structures with planar and non-planar interfaces. Morphology in the diffusion interface was observed by scanning electron microscopy (SEM) and the concentration profile for the constituent element was obtained by electron probe X-ray microanalysis (EPMA) with the aid of quantitative analysis. Transitions from planar interfaces in the / two-phase diffusion couples were indexed by varying the compositions of the terminal alloys. Couples with planar / interfaces exhibited path crossings of the (/) two-phase region parallel to tie-lines. However, the two-phase path crossings for couples developing non-planar interfaces were inclined to tie-lines. The / phase boundary can be determined by the interfacial compositions of the diffusion couple in which the interface is planar.     

Morphology of nitrated layers in titanium alloys of different structural classes

This paper generalizes the results of investigations of the effect of nitrogen on titanium alloys at temperatures of isothermal exposure of 800 – 1100°C and gas pressures of 10⁵ – 10^–1 Pa. As a result of nitration, a gas-saturated area appears on the surfaces of the alloys (in addition to the nitride area). Its qualitative and quantitative characteristics depend on the phase composition of the alloys. The gas-saturated area consists of two layers. For all the investigated alloys, the first layer (adjacent to the nitride area) can be described as the -titanium structure stabilized with nitrogen. If the saturation temperature is lower than the temperature of the polymorphic transformation, then the structure of the second layer is identical to the alloy matrix. As a result of nitration in the (+)--region, this structure undergoes the transformation and, for - and pseudo--alloys, turns into an -grain of smaller size but with higher etchability compared to the -structure of the first layer. For (+)-alloys, this is mainly the -phase (-plates) in the -transformed structure. For -alloys, the morphology of the gas-saturated area does not depend on the saturation temperature and is identical to other structural types nitrated in the -region.Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, L'viv. Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 29, No. 5, pp. 35–41, September–October, 1993.     

Stress-induced phase transformations in a hot-deformed two-phase (α2+γ) TiAl alloy

Stress-induced 2, 2 and 9R phase transformations in a hot-deformed Ti–45 at% Al–10 at% Nb alloy have been investigated using high-resolution transmission electron microscopy. The 2 phase transformation is an interface-related process. The interfacial superdislocations emitted from the misoriented semicoherent 2– interface react with each other or with the moving dislocations in the phase, resulting in the formation of the 2 phase. The nucleation of the 2 phase transformation takes place either at the 2– interfaces or at the stacking faults on the basal plane of 2 phase, and the growth of plate is accomplished by the moving of a/61 0 1 0 Shockley partials on alternate basal plane (0 0 0 1)2. The 9R structure was usually found to form at incoherent twin or pseudotwin boundaries. During deformation the interfacial Shockley partial dislocations of these incoherent twin and pseudotwin boundaries may glide on (1 1 1) planes into the matrix, resulting in the formation of 9R structure. The interfaces (including 2– and – interfaces) as well as the crystallographic orientation relationship between the as-received or stress-induced 2, and 9R phase have been analysed. The mechanisms for the stress-induced 2, 2 and 9R phase transformations were also discussed. © 1998 Chapman & Hall     

Phase transitions and high-temperature crystal chemistry of polymorphous modifications of Cs<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)

Phase transitions and thermal deformations of - and -Cs₂(UO₂)₂(MoO₄)₃ were studied by high-temperature X-ray diffraction analysis. In heating of -Cs₂(UO₂)₂(MoO₄)₃ to 625 ± 25°C, the reconstructive phase transition proceeds. -Cs₂(UO₂)₂(MoO₄)₃ is stable up to 700 ±25°C. The thermal expansion of both phases is sharply anisotropic: ₁₁ = 10 × 10^–6, ₂₂ = 33 × 10^–6, ₃₃ = 10 × 10^–6, _V = 53 × 10^–6 deg^–1 for -Cs(UO₂)₂(MoO₄)₃ and ₁₁ = 13 × 10^–6, ₃₃ = 3 × 10^–6, _V = 31 × 10^–6 deg^–1 for -Cs₂ (UO₂)₂ (MoO₄)₃. The anisotropy of thermal expansion is explained by features of the crystal structure of the compounds.Translated from Radiokhimiya, Vol. 46, No. 5, 2004, pp. 405–407.Original Russian Text Copyright © 2004 by Nazarchuk, Krivovichev, Filatov.     

Investigation of microstructure of molybdenum—copper black electrodeposited coatings with reference to solar selectivity

Optical and microstructural properties of electrodeposited molybdenum-copper (Mo-Cu) black coatings have been studied with reference to their selectivity in absorption of solar radiation. Such coatings were found to have a solar absorptance, , about 0.87 and low thermal emittance, , such that the selectivity, /, was 3.6. Electrodeposited molybdenum-black coatings generally have selectivity /3. The oxidation state of molybdenum in (Mo-Cu) black coatings as determined by X-ray photoelectron spectroscopy is about + 5 (which is fairly close to that of Mo₄O₁₁). Large numbers of irregular particles were found on the surface of molybdenum-copper black coatings. There is evidence that the particles contain copper oxide.     

The age hardening effect in Ti-6 Al-4 V due to ω and α precipitation in the β grains

The structure at room temperature of a quenched TA6V titanium alloy has been investigated. This structure is + or + according to the treatment temperature; it is always metastable. During ageing the grains decomposed by the reaction + + +; this decomposition was accompanied by a large increase of the 0.2% yield stress. No structural modification was observed in. The and phase of TA6V were separately investigated in the form of single-phase alloys. The hardness of was insensitive to ageing, while was considerably hardened by and; we deduced that the strengthening of the minor phase during ageing is mainly responsible for the hardening of TA6V.     

Supercarrier Effective Mass Isotope Effect by Interband Scattering

Supercarrier effective mass isotope effect (exponent ) is investigated using a two-band model with interband pair scattering. The corresponding repulsive interaction incorporates besides the dominating electronic (Coulomb) part an electron-phonon contribution inversely proportional to the ionic mass factor. Calculations illustrating the behaviour of T _c , its isotope exponent , and with doping in La _2–x Sr _x CuO ₄ type underdoped system reflect the observed tendencies. ² Both and diminish with doping, the sign of is opposite to . A typical estimation gives || 0.2.     

The effect of an added seed on the phase transformation and the powder properties in the fabrication of Al2O3 powder by the sol-gel process

-Al₂O₃ powder was produced by the sol-gel process. The prepared sol-gels were seeded with 1.5 wt% powder (0.12m). The phase transformation of Boehmite into -Al₂O₃ and also the particle size distribution of the transformed -Al₂O₃ were strongly influenced by seeding and the heating rate during calcination. -Al₂O₃ seed particles have been shown to act as a nuclei for the transition of - to -Al₂O₃ and also to increase the driving force of the phase transformation, which consequently lowers the transformation temperature by about 200 °C. The particles derived from the seeded sol-gels retarded the formation of vermicular microstructures and were finer than those in the unseeded case. The seeding and the control of the heating rate during calcination could inhibit the grain growth due to transformation into -Al₂O₃. Fine particles which are homogeneous and have a high sinterability at lower temperatures could be obtained.     

Solid state phase transformation of BaB2O4 during the isothermal annealing process

Solid-state phase transformation of BaB₂O₄ during the isothermal annealing process for both to and to were investigated using a platinum crucible. For the -phase crystal at the -phase stable temperature (> 925 °C), the phase transforms to the phase perfectly below the melting temperature of 1100 °C. Meanwhile, for the -phase crystal at the -phase stable temperature (< 925 °C), the phase transforms to the phase perfectly above 800 °C. There is some difference in phase transformation behaviour between bulk-shape crystals and the powder, caused by thermal stress.     

Eutectic solidification characteristics of Bridgman grown AI-3Fe-0.1V alloy

Eutectic solidification characteristics of Al-2.85 wt%Fe-0.12 wt% Valloy have been investigated by steady-state growth over the range of solidification front velocity from 51 to 1030m/s and temperature gradient 8 to 15 K/mm. Increasing growth velocity displaced the Al-Al3Fe eutectic by Al-AlxFe eutectic rather than by the Al-Al6Fe eutectic obtained for the binary Al-3 wt%Fe alloy. A fully Al-AlxFe eutectic structure has been obtained for the first time in the vanadium-containing alloy over the growth velocity range from 71 to1030m/s except at 100 and 510m/s where some Al dendrites were present in the eutectic matrix. TheAl-AlxFe eutectic was observed to undergo a morphological transition from lamellar to rod-like with increasing growth velocity concurrently with formation of a cellular eutectic structure. It was found that the relationship = Av–1/2, between eutectic spacing and growth velocity v, was applicable with A = 22.4 ± 1.8 and 13.8 ± 2.1 m3/2s–1/2 for lamellar and rod-like Al-AlxFe eutectics, respectively.     

Non-equilibrium microstructure of hyper-eutectic Al-Si alloy solidified under superhigh pressure

The non-equilibrium microstructures of hyper-eutectic Al-26.6wt%Si solidified under superhigh pressure (5.5 GPa) have been investigated. The results show that there exists a great deal of primary phase in hyper-eutectic Al-Si alloy. The non-equilibrium microstructure for hyper-eutectic Al-Si alloy is composed of primary phase, phase and ( + ) eutectic phase. The solid solubility of Si in phase and the solid solubility of Al in phase increase significantly. The effects of high pressure on the solidification structures of Al-Si alloy are discussed.     

A high-resolution-electron-microscopy study of a γ/γ′-α directionally solidified eutectic alloy

The microstructure of a /- directionally solidified (DS) eutectic alloy with a nominal composition of Ni-30.26Mo-6.08Al-1.43V (wt%) was investigated by means of high-resolution electron microscopy (HREM) and analytical electron microscopy. The -fibres exhibited a typical morphology with a rectangular cross-section and they displayed the Bain orientation relationship (OR) with the / matrix; that is, [001][001] and (110)(010). Misfit dislocations and lattice strain fields existed at the / interface for different habit planes; that is, (110)(010) and (100)(110) were analysed. EDAX (Energy dispersive X-ray) analysis showed that the composition of the -phase was approximately Ni₄(Mo, Al, V); it contained 90° rotational domains of Ni₃(Mo, Al, V) with a DO₂₂ structure and Ni₂(Mo, Al, V) with a Pt₂Mo structure.     

Sn Infection in Liquid H2O

It is found that Sn may undergo the – phase transition in water without molecular-scale contact with seeds, but this process is very unlikely. It is suggested that the formation and existence of metastable water similar in structure to -Sn is more likely near substances with related structures owing to epitaxy.