Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Optical resolution of (R,S)‐2‐phenyl‐1‐propanol through enantioselective ethycellulose membranes

Enantioselective membrane was prepared using ethyl cellulose (EC) as membrane material. The flux and permselective properties of membrane using aqueous solution of (R,S)‐2‐phenyl‐1‐propanol as feed solution was studied. The employed membrane process was a pressure driven process. All kinds of important conditions including preparation and operation of membranes were investigated in this experimentation. When the membrane was prepared with 18 wt % EC, 20 wt % N,N‐dimethylformamide in casting solution, 13 min evaporation time and 0°C temperature of water bath for the gelation of the membrane, and the operating pressure and feed solution of (R,S)‐2‐phenyl‐1‐propanol were 0.2 MPa and 1.5 mg/mL, respectively, over 90% of enantiomeric excess (e.e.) and 44.2 (mg/m² h) of flux were obtained. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Efficient separation of (R)‐(‐)‐mandelic acid biosynthesized from (R,S)‐mandelonitrile by nitrilase using ion‐exchange process

BACKGROUND: (R)‐(‐)‐Mandelic acid (R‐MA) is an important intermediate and chiral regent with broad uses. An efficient method for the separation of R‐MA from the bioreaction mixture with high yield is of great importance, thus, the main objective of this work is to investigate the recovery of R‐MA using an ion‐exchange process. RESULTS: The equilibrium isotherms for the separation of R‐MA by resin HZ202 were obtained in the pH range 5.0–9.0 and temperature range 25–35 °C. The equilibrium data are well fitted by the Langmuir isotherm. Batch kinetic experiments showed that the mobility of R‐MA^? in solution was rapid and the R‐MA^?/OH^? ion‐exchange process reached equilibrium after about 60 min. Adsorption kinetics were analyzed by a linear driving force mass‐transfer model, yielding good prediction of the kinetic behavior. In fixed bed column experiments, the breakthrough curves of R‐MA from the solution on resin HZ202 were determined at different flow rates and R‐MA was eluted with different concentrations of HCl. A favorable breakthrough curve and optimal eluant concentration were obtained. The results were used for the separation of R‐MA biosynthesized from (R,S)‐mandelonitrile with nitrilase, and separation was successfully achieved with above 90% recovery yield. CONCLUSION: Resin HZ202 presents favorable behavior for the recovery of R‐MA, in terms of capacity, kinetics, affinity, and susceptibility to regeneration. The results of this study provide an efficient method for R‐MA recovery from bioreaction mixture and could potentially be used in industry. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

Synthesis and Biological Evaluation of Purine 2′‐Fluoro‐2′‐deoxyriboside ProTides as Anti‐influenza Virus Agents

2′‐Fluoro‐2′‐deoxyguanosine has been reported to have potent anti‐influenza virus activity in vitro and in vivo. Herein we describe the synthesis and biological evaluation of 6‐modified 2′‐fluoro‐2′‐deoxyguanosine analogues and their corresponding phosphoramidate ProTides as potential anti‐influenza virus agents. Whereas the parent nucleosides were devoid of antiviral activity in two different cellular assays, the 5′‐O‐naphthyl(methoxy‐L ‐alaninyl) ProTide derivatives of 6‐O‐methyl‐2′‐fluoro‐2′‐deoxyguanosine, 6‐O‐ethyl‐2′‐fluoro‐2′‐deoxyguanosine, and 2′‐deoxy‐2′‐fluoro‐6‐chloroguanosine, and the 5′‐O‐naphthyl(ethoxy‐L ‐alaninyl) ProTide of 6‐O‐ethyl‐2′‐fluoro‐2′‐deoxyguanosine displayed antiviral EC₉₉ values of ～12 μM . The antiviral results are supported by metabolism studies. Rapid conversion into the L ‐alaninyl metabolite and then 6‐modified 2′‐fluoro‐2′‐deoxyguanosine 5′‐monophosphate was observed in enzymatic assays with yeast carboxypeptidase Y or crude cell lysate. Evidence for efficient removal of the 6‐substituent on the guanine part was provided by enzymatic studies with adenosine deaminase, and by molecular modeling of the nucleoside 5′‐monophosphates in the catalytic site of a model of ADAL1, thus indicating the utility of the double prodrug concept.     

Synthesis and hydrolysis study of polyacrylates containing 2′,5-dichloro-4′-nitrosalicylanilide

Monomers (meth)acryloyloxy-2′,5-dichloro-4′-nitrosalicylanilide have been synthesized by treating 2′,5-dichloro-4′-nitrosalicylanilide (niclosamide) with acryloyl or methacryloyl chloride, and polymerized by free radical polymerization to give a polymer containing chemically bonded niclosamide. The structure of monomer and polymer were confirmed by IR, UV, and elemental analysis. Hydrolysis data of polymer in different media indicated that the hydrolysis rates of polymer were strongly dependent on the nature of the polymer structure and the hydrolyzing medium. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 29–33, 1997     

Atom transfer radical polymerization of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene

Atom transfer radical polymerization (ATRP) of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene ((R)‐MAMBN) mediated by different amine ligands, copper(I) chloride and ethyl 2‐bromopropionate in different solvents, and reverse ATRP of (R)‐MAMBN were studied. It was shown that optically active polymers were obtained, with poor control of the molecular weights, and low polydispersities. Specific rotation of the polymers increased with increasing molecular weights. By comparison with (R)‐MAMBN, poly((R)‐MAMBN)s exhibits higher specific rotation and a positive Cotton effect. Copyright © 2003 Society of Chemical Industry     

Bis(4′-phenyl-2,2′:6′,2″-terpyridine)ruthenium(II): Holding the {Ru(tpy)2} embraces at bay

The solid state structure of [Ru(Phtpy)₂][PF₆]₂ · 4MeCN has been determined (Phtpy = 4′-phenyl-2,2′:6′,2″-terpyridine); [Ru(Phtpy)₂]²⁺ cations pack into sheets by virtue of {M(tpy)₂}₂ embraces, and the MeCN solvent molecules are involved in NH–C interactions which prevent the efficient packing of adjacent sheets. Comparisons with related structures lead to some generalizations about packing motifs in salts containing [M(Phtpy)₂]²⁺ or [M(pytpy)₂]²⁺ cations (pytpy = 4′-pyridyl-2,2′:6′,2″-terpyridine).     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Reaction kinetics and thermal properties of epoxidised cresol novolac/4,4′‐diglycidyl (3,3′,5,5′‐tetramethylbiphenyl) epoxy resin composite cured with aromatic diamine

A series of novel composites based on different ratios of epoxidised cresol novolac (ECN) and 4,4′‐diglycidyl(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP) have been prepared with the curing agent 4,4′‐methylenediamine (DDM) and 4,4′‐diaminodiphenylsulfone (DDS), respectively. The investigation of cure kinetics was performed by differential scanning calorimetry using an isoconversional method. The high thermal stabilities of the cured samples were also studied by thermogravimetric analysis. In addition, no phase separation was observed for cured ECN/DDM and ECN/DDS blending with different amounts of TMBP by dynamic mechanical analysis and scanning electron microscopy. Moreover, the cured systems also exhibited excellent impact properties and low moisture absorption. All the results indicate that the ECN/TMBP/DDM and ECN/TMBP/DDS systems are promising materials in electronic packaging. Copyright © 2011 Society of Chemical Industry     

Synthesis of polyblends from polypropylene and poly(R,S)‐β‐hydroxybutyrate,and their characterization

Blends of modified polypropylene (PP) with poly(R,S)‐β‐hydroxybutyrate (PHB) were prepared by casting polymer solutions, followed by compression molding into thin films. The modified polypropylene was obtained by oxidation with hydrogen peroxide. Oxidation of polypropylene produced new functional groups such as carbonyl and hydroxyl groups on the polymer chain, and a decrease in molecular weight and crystallinity of the polymers. Maximum crystallinity and mechanical properties of the polyblends were found with a PP/PHB ratio of 90/10 (w/w), and then decreased with increasing PHB content in the polyblends. Biodegradability of the polyblends was lower than that of bacterial and synthetic PHBs. Furthermore, an increase of PHB proportion in the polyblends resulted in highly non‐compatible polyblends. Hence only PHB and small parts of the polyblends were decomposed by microorganisms. Copyright © 2006 Society of Chemical Industry     

Synthesis of Substituted 2,2′‐Bipyridines and 2,2′:6′,2′′‐Terpyridines by Cobalt‐Catalyzed Cycloaddition Reactions of Nitriles and α,ω‐Diynes with Exclusive Regioselectivity

A variety of substituted 2,2′‐bipyridines were synthesized by a 1,2‐bis(diphenylphosphino)ethane (dppe)/cobalt chloride hexahydrate (CoCl₂⋅6 H₂O)/zinc‐catalyzed [2+2+2] cycloaddition reaction of diynes and nitriles, with all reactions exhibiting exclusive regioselectivity. Thus, symmetrical and unsymmetrical 1,6‐diynes and 2‐cyanopyridine reacted in the presence of 5 mol % of dppe, 5 mol % of CoCl₂⋅6 H₂O and 10 mol % of zinc powder to provide the corresponding 2,2′‐bipyridines. Under identical reaction conditions, 1‐(2‐pyridyl)‐1,6‐diynes and nitriles reacted smoothly with exclusive regioselectivity to produce 2,2′‐bipyridines in good yield. 2,2′‐Bipyridines were also obtained by the double [2+2+2] cycloaddition reaction of 1,6,8,13‐tetraynes with nitriles. Similarly, 2,2′:6′,2′′‐terpyridines were synthesized from 1‐(2‐pyridyl)‐1,6‐diyne and 2‐cyanopyridine. The regiochemistry observed can be explained by considering the electronic nature of cobaltacyclopentadiene intermediates and nitriles. A survey of the exclusive regiochemical trend gives reasonable credence to the synthetic potential of the present method.     

Polyurethane foams with the contribution of products of hydroxyalkylation of N,N′‐bis(2‐hydroxyalkyl)oxamides with alkylene carbonates—obtaining and properties

In the reactions of N,N′‐bis(2‐hydroxyethyl)oxamide (BHEOD) with an excess of ethylene carbonate (EC) and N,N′‐bis(2‐hydroxypropyl)oxamide (BHPOD) with an excess of propylene carbonate (PC), the hydroxyethoxy and hydroxypropoxy derivatives of oxamide (OD) were obtained, respectively, distinguished by an increased thermal stability. First time, these derivatives were used as polyol components to obtain foamed polyurethane plastics with the contribution of 4,4′‐diisocyanate diphenylmethane (MDI). The rigid polyurethane foams of a slight water uptake, good stability of dimensions, enhanced thermal stability, and compression strength were obtained. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Enantioenriched Calcium‐(R)‐5,5′,6,6′,7,7′,8,8′‐Octahydro‐BINOL (H8‐BINOL): An Efficient Catalyst for the Creation of a Quaternary Stereocenter#

An efficient catalyst for the creation of a quaternary stereocenter has been developed utilizing easily available, eco‐friendly CaCl₂ and applied for enantioselective carbon‐carbon bond forming reactions. Among the surveyed ligands, it was found that (R)‐5,5′,6,6′,7,7′,8,8′‐octahydro‐BINOL‐Ca ( 2f ) gave maximum ee (72%) with excellent yields.     

Copolycondensation of IPA/TPA,BPA, and 4,4′‐dihydroxydipehnylsulfone and 4,4′‐dicarboxydiphenylsulfone

Copolycondensations of IPA, TPA, bisphenol A (BPA), and several cimonomers were carried out to improve thermal properties, such as, the glass transition temperature (T_g) of the IPA/TPA (50/50)–BPA polyester. Among the comonomers examined, 4,4′‐Dihydroxydiphenylsulfone (BPS) and 4,4′‐Dicarboxydiphenylsulfone (DCDPS) having a strongly dipolar sulfonyl group in the chain were significantly effective. The favorable effect upon the T_gs was studied by varying the amounts of BPS and DCDPS incorporated into the copolymers. In the copolycondensation with BPS, two‐stage copolycondensation of BPA first and then BPS, the reverse order of reaction, and their spontaneous addition were examined to investigate the effect of distribution of the BPS unit segments in the copolymer upon the T_gs of the resulted copolymers. The distribution was briefly studied from distribution of the IPA/TPA‐BPA oligomers in the initial reaction using GPC. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 875–879, 2000     

Lipase‐catalyzed dynamic hydrolytic resolution of (R,S)‐2,2,2‐trifluoroethyl α‐chlorophenyl acetate in water‐saturated isooctane

The hydrolytic resolution of (R,S)‐2,2,2‐trifluoroethyl α‐chlorophenylacetate in water‐saturated isooctane containing Lipase MY(I) at 35 °C is selected as the best reaction condition for producing (R)‐α‐chlorophenyl acetic acid. The kinetic constants, and hence an enantiomeric ratio of 33.6, are estimated and employed for the modeling of time‐course conversions of both substrates by considering product inhibition and enzyme deactivation effects. A successful dynamic kinetic resolution is also achieved, giving the desired (R)‐α‐chlorophenylacetic acid of 93.0% yield and ee_P = 89.5% when 80 mmol dm^?3 trioctylamine acting as the racemization catalyst and enzyme activator is initially added. Copyright © 2006 Society of Chemical Industry     

Chiral N,N′‐Dioxide–Scandium(III)‐Catalyzed Asymmetric Epoxidation of 2‐Arylidene‐1,3‐diketones with Hydrogen Peroxide

The catalytic asymmetric epoxidation of 2‐arylidene‐1,3‐diketones using aqueous 30% H₂O₂ as oxidant has been successfully realized by a N,N′‐dioxide–scandium(III) triflate [Sc(OTf)₃] complex, giving the corresponding products in moderate to good yields (up to 85%) with excellent enantioselectivities (up to 99% ee) under mild reaction conditions without extra additives.

     

Efficient Biosynthesis of (R)‐ or (S)‐2‐Hydroxybutyrate from l‐Threonine through a Synthetic Biology Approach

An efficient multi‐enzyme cascade reaction for the synthesis of (R)‐ or (S)‐2‐hydroxybutyric acid [(R)‐ or (S)‐2‐HB] from l ‐threonine was developed by using recombinant Escherichia coli cells expressing separately or co‐expressing l ‐threonine deaminase from Escherichia coli K‐12 (ilvA), formate dehydrogenase (FDH) from Candida boidinii and l ‐lactate dehydrogenase (l ‐LDH) from Oryctolagus cuniculus or d ‐lactate dehydrogenase (d ‐LDH) from Staphylococcus epidermidis ATCC 12228. Up to 750 mM of l ‐threonine were completely transformed to (R)‐ or (S)‐2‐HB in optically pure form (>99% ee) with high isolated yields. This one‐pot multi‐enzyme transformation provides a new practical method for the synthesis of these important optically pure compounds.

     

Origin of the methylene bonds in poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylenevinylene] prepared according to Gilch's method: novel applications

Impurities containing methylene bridges between 2‐((2′‐ethylhexyl)oxy)‐5‐methoxy‐benzene molecules are inevitably formed during the synthesis of 1,4‐bis(chloromethyl)‐2‐((2′‐ethylhexyl)oxy)‐5‐methoxy‐benzene, the monomer used in the preparation of poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV), but they can be removed by double recrystallization of the monomer prior to polymerization. When impurities containing methylene bridges participate in a Gilch polymerization, the methylene bonds formed in the main chains are prone to break at 200 °C, that is, at least 150 °C below the major degradation temperature of defect‐free MEH‐PPV. Interestingly, the thermal treatment used to break the methylene bonds present reduces the chain aggregation of MEH‐PPV during film formation and induces its blends with poly(2,3‐diphenyl‐5‐octyl‐p‐phenylene‐vinylene) (DPO‐PPV) to form a morphology similar to that of block copolymers. Both significantly enhance the luminescence properties. Copyright © 2006 Society of Chemical Industry