A kinetic study on polymerization of methyl methacrylate with di‐t‐butyl perfumarate

Di‐t‐butyl perfumarate (DBPF) was found to induce the radical polymerizations of various vinyl monomers at 60°C in benzene, although the initiation activity was considerably lower than those of dimethyl 2,2′‐azobisisobutyrate and benzoyl peroxide. The polymerizations with DBPF showed a tendency of dead‐end polymerization. The polymerization of methyl methacrylate (MMA) with DBPF was kinetically studied in chlorobenzene. The initial polymerization rate (R_p) was given by R_p = k [DBPF]^0.5 [MMA]^1.1. The overall activation energy of the polymerization was 47 kJ/mol, a very low value. Use of this value and activation energies of propagation and termination for MMA gave an unexpectedly low activation energy (65 kJ/mol) to the decomposition of DBPF, a t‐butyl perester, in the polymerization system. An ESR study on the polymerization of di‐2‐ethylhexyl itaconate with DBPF revealed that the observed dead‐end tendency comes from the consumption of DBPF. These results suggest that the initiator efficiency of DBPF is considerably low in the present polymerization systems. Some solvent effect was observed on the polymerization of MMA with DBPF. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 218–224, 2000     

Optically active helical vinyl polymers via radical polymerization of (S)‐3‐vinyl‐2,2′‐bisalkoxy‐1,1′‐binaphthyl

(S)‐3‐Vinyl‐2,2′‐bisalkoxy‐1,1′‐binaphthyl ( 3 ) was synthesized via the Wittig reaction. Radical polymerization of all the monomers can take place smoothly in the temperature region tested. These polymers (poly‐ 3 ) showed very large specific optical rotations which were four times as large as those of the corresponding monomers 3 . Poly‐ 3 displayed optical rotations and Cotton effects in the UV?visible absorption region of side groups which were different from the corresponding monomers 3 and the model compounds (S)‐3‐ethyl‐2,2′‐bisalkoxy‐1,1′‐binaphthyl ( 4 ). These facts imply the formation of helicity of the main chain and the helical conformations were quite stable demonstrated by the unchanged pattern of temperature variable circular dichroism spectra. © 2015 Society of Chemical Industry     

Synthesis and properties of carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide) as a novel cellulose‐based superabsorbent

A new cellulose‐based superabsorbent polymer, carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide), was prepared by the free‐radical grafting solution polymerization of acrylic acid (AA) and acrylamide (AM) monomers onto carboxymethyl cellulose (CMC) in the presence of N,N′‐methylenebisacrylamide as a crosslinker with a redox couple of potassium persulfate and sodium metabisulfite as an initiator. The influences of reaction variables such as the initiator content, crosslinker content, bath temperature, molar ratio of AA to AM, and weight ratio of the monomers to CMC on the water absorbency of the carboxymethylcellulose‐graft‐poly(acrylic acid‐co‐acrylamide) copolymer were investigated. The copolymer's structures were characterized with Fourier transform infrared spectroscopy. The optimum reaction conditions were obtained as follows: the bath temperature was 50°C; the molar ratio of AA to AM was 3 : 1; the mass ratio of the monomers to CMC was 4 : 1; and the weight percentages of the crosslinker and initiator with respect to the monomers were 0.75 and 1%, respectively. The maximum water absorbency of the optimized product was 920 g/g for distilled water and 85 g/g for a 0.9 wt % aqueous NaCl solution. In addition, the superabsorbent possessed good water retention and salt resistance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1382–1388, 2007     

Synthesis and surface properties of polydimethylsiloxane‐based block copolymers: poly[dimethylsiloxane‐block‐ (ethyl methacrylate)] and poly[dimethylsiloxane‐block‐(hydroxyethyl methacrylate)]

A polydimethylsiloxane (PDMS) macroazoinitiator was synthesized from bis(hydroxyalkyl)‐terminated PDMS and 4,4′‐azobis‐4‐cyanopentanoic acid by a condensation reaction. The bifunctional macroinitiator was used for the block copolymerization of ethyl methacrylate (EMA) and 2‐(trimethylsilyloxy)ethyl methacrylate (TMSHEMA) monomers. The poly(DMS‐block‐EMA) and poly(DMS‐block‐TMSHEMA) copolymers thus obtained were characterized using Fourier transform infrared and ¹H NMR spectroscopy and differential scanning calorimetry. After the deprotection of trimethylsilyl groups, poly(DMS‐block‐HEMA) and poly(DMS‐block‐EMA) copolymer film surfaces were analysed using scanning electron microscopy and X‐ray photoelectron spectroscopy. The effects of the PDMS concentration in the copolymers on both air and glass sides of films were examined. The PDMS segments oriented and moved to the glass side in poly(DMS‐block‐EMA) copolymer film while orientation to the air side became evident with increasing DMS content in poly(DMS‐block‐HEMA) copolymer film. The block copolymerization technique described here is a versatile and economic method and is also applicable to a wide range of monomers. The copolymers obtained have phase‐separated morphologies and the effects of DMS segments on copolymer film surfaces are different at the glass and air sides. Copyright © 2010 Society of Chemical Industry     

Novel synthesis and solution properties of hyperbranched poly(ethyl methacrylate)s by quasi‐living radical copolymerization using photofunctional inimer

Hyperbranched poly(ethyl methacrylate)s (PEMA) were prepared by quasi‐living radical copolymerization of 2‐(N,N‐diethylaminodithiocarbamoyl)‐ethyl methacrylate (inimer: DTEM) with ethyl methacrylate (EMA) under UV irradiation. DTEM monomers play an important role in this copolymerization system as inimers capable of initiating living radical polymerization of the vinyl group. Two monomers (DTEM and EMA) showed almost equal reactivity toward both propagating species, and the copolymer composition was the same as the comonomer feed. This result means that both the branching and chain length of the hyperbranched molecules can be controlled statistically by the feed monomer ratios. The compact nature of the hyperbranched macromolecules is demonstrated by comparison of their solution properties with the linear analogues. Copyright © 2004 Society of Chemical Industry     

Morpholine‐based RAFT agents for the reversible deactivation radical polymerization of vinyl acetate and N‐vinylimidazole

Reversible addition–fragmentation chain transfer (RAFT) polymerization of less‐activated monomers in a controlled fashion is challenging due to the high reactivity and instability of the propagating radicals. We have designed dithiocarbamate‐based RAFT agents with morpholine as activating ‘Z’ group and benzyl, ethyl(1‐ethanoate)yl, ethyl(2‐propanoate)yl and cyanomethyl as ‘R’ leaving groups and investigated them for the reversible deactivation radical polymerization of vinyl acetate (VAc) and N‐vinylimidazole (N‐VIm). RAFT polymerization of VAc and N‐VIm at 70 °C using azobisisobutyronitrile as a free radical initiator proceeded in a controlled fashion as demonstrated by a linear increase in molar mass with conversion. Interestingly, the polymerization of VAc followed fast kinetics (approx. 60 min) with good to moderate control affording high‐molar‐mass poly(VAc) polymers. Furthermore, the synthesized chain transfer agents were able to polymerize N‐VIm under controlled conditions. The morpholine RAFT agents bearing cyanomethyl and ethyl(2‐propanoate)yl leaving groups showed better control of the polymerization of VAc and N‐VIm compared to the others. © 2020 Society of Chemical Industry     

Synthesis and characterization of poly[(1‐vinyl‐1,2,4‐triazole)‐co‐(monomer with carboxylic acid group(s))] and determination of monomer reactivity ratios: I. Acrylic acid

Copolymers of 1‐vinyl‐1,2,4‐triazole (VTAz) and acrylic acid (AA) having different mole ratios were synthesized using free radical‐initiated solution polymerization in dimethylformamide at 70 °C with α,α′‐azobisisobutyronitrile as initiator in nitrogen atmosphere. The compositions of the synthesized copolymers for a wide range of monomer feeds were determined using Fourier transform infrared (FTIR) spectroscopy through recorded absorption bands for VTAz (1510 cm^?1, C?N (triazole ring) stretching mode) and AA (1710 cm^?1, C?O stretching mode) units. The structures of the copolymers were characterized using FTIR and ¹H NMR spectroscopy. The copolymer compositions were also determined from ¹H NMR analysis following proton signals of carboxyl group at 11.8–12.5 ppm of AA and of triazole ring at 7.5–8.1 ppm of VTAz. Monomer reactivity ratios for the VTAz‐AA pair were estimated using linear methods, i.e. Fineman–Ross (FR) and Kelen–Tüdös (KT). From FTIR evaluation, monomer reactivity ratios were calculated as r₁ = 0.404 and r₂ = 1.496 using the FR method and r₁ = 0.418 and r₂ = 1.559 using the KT method. These values were found to be very close to those obtained from NMR evaluation. The two cases r₁r₂ < 1 and r₁ < r₂ indicated the random distribution of the monomers in the final copolymers and the presence of a greater amount of AA units in the copolymer than in the feed, respectively. The observed relatively high activity of complexed growing radical‐AA^? … VTAz was explained by the effect of complex formation between carbonyl groups and triazole fragments in chain growth reactions. Thermal behaviours of copolymers with various compositions were investigated using thermogravimetric and differential scanning calorimetric analyses. It was observed that thermal stabilities and glass transition temperatures of the copolymers increased resulting from complex formation between acid and triazole units. © 2012 Society of Chemical Industry     

NMR study of the early stages of gel formation in the PEG/poly(AMPS‐co‐NIPA) semi‐interpenetrating network system

The rate of conversion of the monomers and crosslinker in the formation of a novel semi‐interpenetrating poly(ethylene glycol)/ poly(2‐acrylamido‐2‐methylpropane sulfonic acid‐co‐N‐isopropylacrylamide) copolymer hydrogel was determined by using ¹H‐NMR spectrometry. It was established that poly(ethylene glycol) does not participate in the polymerization reactions and that crosslinking by methylenebisacrylamide occurs predominantly in the early stages of copolymer chain growth. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3635–3641, 2004     

Electric‐field‐induced aggregation of polymeric micelles to construct secondary assembly films

A new amphiphilic quaternary random ionomer (PIDHES) was used to construct self‐assembly films. PIDHES was prepared by a selective ionization of quaternary random copolymer, poly(N,N‐domethyl amimethyl methartylate‐co‐2‐hydroxypropyl methacrylate‐co‐2‐ethylhexyl acrylate‐co‐styrene) precursor, which was synthesized by free radical copolymerization of commercial hydrophilic monomers N, N‐domethyl amimethyl methartylate and 2‐hydroxypropyl methacrylate and hydrophobic monomers 2‐ethylhexyl acrylate and styrene PIDHES could self‐assemble into polymer micelles in water, which underwent orientated deposition in the electric field and ultimately produced secondary assembly films. Scanning electron microscopy studies showed that the resultant PIDHES secondary assembly film was smooth and compact. Moreover, it was found that PIDHES micelles concentration and electric‐field‐induced time had a strong influence on the morphologies of the resultant secondary assembly film. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Grafting of water‐soluble sulfonated monomers onto functionalized fumed silica nanoparticles via surface‐initiated redox polymerization in aqueous medium

Sulfonated polymer/fumed silica hybrid nanoparticles were prepared via surface‐initiated free radical polymerization of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (PAMPS‐g‐FSN), styrene sulfonic acid sodium salt (PSSA‐g‐FSN) and vinyl sulfonic acid sodium salt (PVSA‐g‐FSN) from the surface of aminopropyl‐functionalized fumed silica nanoparticles (AFSNs) dispersed in aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and sodium dodecyl sulfate were used as redox initiator and stabilizer respectively. AFSNs were prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of fumed silica nanoparticles. Sulfonated monomers (AMPS, SSA or VSA) were then grafted onto the AFSNs ultrasonically dispersed in water via redox initiation at 40 °C. Structure, thermal properties, particle size and morphology of the AFSNs and PAMPS‐g‐FSN, PSSA‐g‐FSN and PVSA‐g‐FSN hybrid nanoparticles were characterized by Fourier transform infrared spectroscopy, TGA, SEM, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The results indicated that the sulfonated monomers were successfully grafted onto the fumed silica nanoparticles. Grafting amounts of the sulfonated polymers onto the fumed silica nanoparticle surface were estimated from TGA thermograms to be 59%, 13% and 29% for the PAMPS, PSSA and PVSA, respectively. From SEM, TEM and DLS analysis, polymer‐grafted fumed silica nanoparticles with an average diameter smaller than 70 nm and a (semi‐) spherical shape were observed. A significant bimodal particle size distribution was observed only for the PAMPS‐g‐FSN with average diameters of 39.6 nm (84.1% per number) and 106 nm (15.9% per number). The hydrophilic sulfonated polymer/grafted fumed silica obtained from the redox graft polymerization gave a stable colloidal dispersion in acidic aqueous medium. Copyright © 2012 Society of Chemical Industry     

Electrolyte‐ and pH‐responsive polyampholytes with potential as viscosity‐control agents in enhanced petroleum recovery

Low‐charge‐density amphoteric copolymers and terpolymers composed of AM, the cationic comonomer (3‐acrylamidopropyl)trimethyl ammonium chloride, and amino acid derived monomers (e.g., N‐acryloyl valine, N‐acryloyl alanine, and N‐acryloyl aspartate) have been prepared via free‐radical polymerization in aqueous media. These terpolymers with random charge distributions have been compared to terpolymers of like compositions containing the anionic comonomer sodium 3‐acrylamido‐3‐methylbutanoate. Terpolymer compositions determined by ¹³C‐ and ¹H‐NMR spectroscopy, terpolymer molecular weights and polydispersity indices obtained via size exclusion chromatography/multi‐angle laser light scattering, and hydrodynamic dimensions determined via dynamic light scattering have allowed a direct comparison of the fundamental parameters affecting the behavioral characteristics. The solution properties of low‐charge‐density amphoteric copolymers and terpolymers have been studied as functions of the solution pH, ionic strength, and polymer concentration. The low‐charge‐density terpolymers display excellent solubility in deionized water with no phase separation. The charge‐balanced terpolymers exhibit antipolyelectrolyte behavior at pH values greater than or equal to 6.5 ± 0.2. As the solution pH decreases, these charge‐balanced terpolymers become increasingly cationic because of the protonation of the anionic repeat units. The aqueous solution behavior (i.e., globule‐ to‐coil transition at the isoelectric point in the presence of salt and globule elongation with increasing charge asymmetry) of the terpolymers in the dilute regime correlates well with that predicted by the polyampholyte solution theories. An examination of the comonomer charge density, hydrogen‐bonding ability, and spacer group (e.g., the moiety separating the ionic group from the polymer chain) indicates that conformational restrictions of the sodium 3‐acrylamido‐3‐methylbutanoate and N‐acryloyl valine segments result in increased chain stiffness and higher solution viscosities in deionized water and brine solutions. On the other hand, the terpolymers with N‐acryloyl alanine and N‐acryloyl aspartate segments are more responsive to changes in the salt concentration. An assessment of the effects of the terpolymer structure on the viscosity under specified conditions of the ionic strength and pH from these studies should allow for rational design of optimized systems for enhanced petroleum recovery. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007.     

Synthesis of ω‐amino‐α‐phenylcarbonate alkanes and their polymerization to [n]‐polyurethanes

Aliphatic [n]‐polyurethanes have recently been synthesized from ω‐isocyanato‐α‐alkanols or, more traditionally, by cationic ring‐opening polymerization of cyclourethanes or by the Bu₂Sn(OMe)₂‐promoted polycondensation of ω‐hydroxy‐α‐O‐phenylurethane alkanes. For the latter procedures, the conditions employed do not seem to be suitable for highly functionalized monomers. In contrast, the polymerization of ω‐amino‐α‐phenylcarbonate alkanes is expected to occur under milder conditions. ω‐Amino‐α‐phenylcarbonate alkanes have been synthesized from 6‐aminohexanol (1) and 3‐aminopropanol (6). The procedure involves the N‐Boc protection of the amino group, followed by activation of the alcohol. Removal of the N‐Boc affords the corresponding ω‐amino‐1‐O‐phenyloxycarbonyloxyalkane hydrochlorides. Other oligomeric comonomers between 1 and 6 have been prepared. The polymerization of these precursors takes place in the absence of metal catalysts to afford the corresponding linear and regioregular [n]‐polyurethanes. The procedure described is useful for the preparation of stable ω‐amino‐α‐phenylcarbonate alkane derivatives, which possess varied chain lengths between the terminal functions. These monomers yield [n]‐polyurethanes having various structures starting from just two aminoalkanols. The polyurethanes were obtained in high yields, with reasonable molecular weight and polydispersity values, and they were characterized spectroscopically and thermally. These studies reveal constitutionally uniform structures that are free of carbonate or urea linkages. Copyright © 2010 Society of Chemical Industry     

Emulsifier‐minor emulsion copolymerization of BA‐MMA‐St‐MAA (or AA)‐N‐MA

A novel emulsion polymerization technique referred to as emulsifier‐minor emulsion polymerization was achieved by the copolymerization of methyl methacrylate, butyl acrylate, and styrene (MMA‐BA‐St) with a combination of water‐soluble ionic monomers [methacrylic acid (MAA) or acrylic acid (AA)] and nonionic monomers (N‐methylol acrylamide). In the technique, water‐soluble monomers play a crucial role in the stabilization of the latex particles as they can be bound to the particle surface and form a hydrate protective layer, which exhibits steric and/or electrostatic effects to prevent particle coagulation. The minor but over its critical micelle concentration emulsifier sodium alkylated diphenyl ether disulfonate (DSB) results in the nucleation of particles mainly by the micelle nucleation mechanism and thus determines the polymerization rate, the particle size, and the number. The film water resistance of the latices can be improved, and the foaming capacity of can be lowered by using technique instead of conventional emulsion polymerization. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2923–2929, 2004     

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane

Controlled radical double ring‐opening polymerization of 2‐methylene‐1,4,6‐trioxaspiro[4,4]nonane (MTN) has been achieved with tert‐butyl perbenzoate (TBPB) as initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical (TEMPO) at 125 °C. The molecular weight polydispersity of the polymers is obviously lower than that of polymers obtained by conventional procedures. As the [TEMPO]/[TBPB] molar ratio increased, the polydispersity decreased and a polydisperty as low as 1.2 was obtained at high TEMPO concentration. With the conversion of the monomer increasing, the molecular weight of the polymers turned higher and a linear relationship between the M_w and the monomer conversion was observed. The monomer conversion, however, did not exceed 30 %. © 2000 Society of Chemical Industry     

Novel synthesis of branched polystyrenes by quasi‐living radical copolymerization using photofunctional inimer

Branched polystyrenes were prepared by quasi‐living radical copolymerization of N,N‐diethylaminodithiocarbamoylmethylstyrene (inimer: DTCS) with styrene under UV irradiation. DTCS monomers play an important role in this copolymerization system as an inimer capable of initiating living radical polymerization of the vinyl group. Two monomers (DTCS and styrene) showed equal reactivity toward both propagating species, and the copolymer composition was the same as the comonomer feed. This result means that both the branching and chain length of the hyperbranched molecules can be controlled statistically by the feed monomer ratios. The compact nature of the branched macromolecules is demonstrated by viscosity measurements compared to the linear analogues. © 2001 Society of Chemical Industry     

4‐Halogeno‐3,5‐dimethyl‐1H‐pyrazole‐1‐carbodithioates: versatile reversible addition fragmentation chain transfer agents with broad applicability

Pyrazole‐based dithiocarbamates are versatile reversible addition fragmentation chain transfer (RAFT) agents that provide molar mass and dispersity (? ) control over the radical polymerization of both more and less activated monomers (MAMs and LAMs). In this paper we report on theoretical and experimental findings demonstrating that their activity as RAFT agents can be significantly enhanced by introducing electron‐withdrawing substituents to the pyrazole ring. This enhancement is most noticeable in methyl methacrylate polymerization where product molar masses are more accurately predicted by the RAFT agent concentration, and significantly lower ? values, with respect to those seen with the parent RAFT agent under similar conditions, are observed. Thus, use of 4‐chloro‐3,5‐dimethyl‐1H ‐pyrazole‐1‐carbodithioate provides a poly(methyl methacrylate) with the anticipated molar mass and ? as low as 1.3 at high monomer conversion. Good control is retained for monosubstituted MAMs, styrene, methyl acrylate and N ,N ‐dimethylacrylamide. Low dispersities and less molar mass control are also achieved for homo‐ and copolymerizations with the LAM vinyl acetate, albeit with some retardation. © 2017 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

DOPO‐Based Phosphorus‐Containing Methacrylic (Co)Polymers: Glass Transition Temperature Investigation

A two‐step synthetic procedure is designed for preparing new flame‐retardant methacrylic monomers containing 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) as a substituent side group. DOPO and methacrylate moieties are linked by linear aliphatic hydrocarbon spacers (3 to 11 carbon atoms). Copolymerization with methyl methacrylate is carried out leading to copolymers containing between 2 and 10 wt% phosphorus. All homo‐ and copolymers exhibit a unique glass transition temperature (T_g ). A new group contribution for DOPO‐based substituent is extracted that leads to reasonable estimations of T_g s of other published polymers. The Fox equation provides a good estimation of T_g s for most copolymers and for physical blends of poly(methyl methacrylate) (PMMA) and DOPO. When using monomers having three and four carbon atoms in the hydrocarbon spacer, the T_g of copolymers remains close to that of PMMA over a wide range of composition.     

Accelerant‐promoted free radical polymerization of methacrylates by stabilized nitroxide unimolecular initiators: synthesis and characterization

BACKGROUND: This investigation evaluates the effectiveness of initiator adducts for living and controlled polymerization of methacrylates, crosslinking of dimethacrylates and thermal stabilities of the resulting polymers. Adducts of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy with benzoyl peroxide and with azobisisobutyronitrile were prepared and evaluated as stabilized unimolecular initiators for the free radical polymerization of methacrylate monomers using sulfuric acid as catalyst. The monomers used were methyl methacrylate, triethylene glycol dimethacrylate (TEGDMA) and ethoxylated bisphenol A dimethacrylate (EBPADMA). RESULTS: Successful polymerization was achieved at 70 and 130 °C with reaction times ranging from 45 min to 120 h. The dispersity (D) of poly(methyl methacrylate) (PMMA) was 1.09–1.28. The livingness and extent of control over polymerization were confirmed with plots of M_n evolution as a function of monomer conversion and of the first‐order kinetics. The glass transition temperature (T_g) for PMMA was 123–128 °C. The degradation temperature (T_d) for PMMA was 350–410 °C. T_d for poly(TEGMA) was 250–310 °C and for poly(EBPADMA) was 320–390 °C. CONCLUSION: The initiators are suitable for free radical living and controlled polymerization of methacrylates and dimethacrylates under mild thermal and acid‐catalyzed conditions, yielding medium to high molecular weight polymers with low dispersity, high crosslinking and good thermal stability. Copyright © 2008 Society of Chemical Industry     

Nitroxide‐mediated synthesis of styrenic‐based segmented and tapered block copolymers using poly(lactide)‐functionalized TEMPO macromediators

Poly(styrene)‐poly(lactide) (PS‐PLA), poly (tert‐butyl styrene)‐poly(lactide) (PtBuS‐PLA) diblocks, and poly(tert‐butyl styrene)‐poly(styrene)‐poly(lactide) (PtBuS‐PS‐PLA) segmented and tapered triblocks of controlled segment lengths were synthesized using nitroxide‐mediated controlled radical polymerization. Well‐defined PLA‐functionalized macromediators derived from hydroxyl terminated TEMPO (PLA_T) of various molecular weights mediated polymerizations of the styrenic monomers in bulk and in dimethylformamide (DMF) solution at 120–130°C. PS‐PLA and PtBuS‐PLA diblocks were characterized by narrow molecular weight distributions (polydispersity index (M_w/M_n) < 1.3) when using the PLA_T mediator with the lowest number average molecular weight M_n= 6.1 kg/mol while broader molecular weight distributions were exhibited (M_w/M_n = 1.47‐1.65) when using higher molecular weight mediators (M_n = 7.4 kg/mol and 11.3 kg/mol). Segmented PtBuS‐PS‐PLA triblocks were initiated cleanly from PtBuS‐PLA diblocks although polymerizations were very rapid with PS segments ～ 5–10 kg/mol added within 3–10 min of polymerization at 130°C in 50 wt % DMF solution. Tapering from the PtBuS to the PS segment in semibatch mode at a lower temperature of 120°C and in 50 wt % DMF solution was effective in incorporating a short random segment of PtBuS‐ran‐PS while maintaining a relatively narrow monomodal molecular weight distribution (M_w/M_n ≈ 1.5). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Influence of the comonomers (styrene and methyl acrylate) on the rate of photocrosslinking of 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}‐ phenyl acrylate

[2,6‐Bis(4‐hydroxybenzylidene)cyclohexanone] (HBC) was prepared by reacting cyclohexanone and p‐hydroxybenzaldehyde in the presence of acid catalyst. Acrylated derivative of HBC, 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA), was prepared by reacting HBC with acryloyl chloride in the presence of triethylamine. Copolymers of HBA with styrene (S) and methyl acrylate (MA) of different feed compositions were carried out by solution polymerization technique by using benzoyl peroxide (BPO) under nitrogen atmosphere. All monomers and polymers were characterized by using IR and NMR techniques. Reactivity ratios of the monomers present in the polymer chain were evolved by using Finnman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (ex‐KT) methods. Average values of reactivity were achieved by the following three methods: r₁ (S) = 2.36 ± 0.45 and r₂ (HBA) = 0.8 ± 0.31 for poly(S‐co‐HBA); r₁ = 1.62 ± 0.06 (MA); and r₂ = 0.12 ± 0.07 (HBA) for poly(MA‐co‐HBA). The photocrosslinking property of the polymers was done by using UV absorption spectroscopic technique. The rate of photocrosslinking was enhanced compared to that of the homopolymers, when the HBA was copolymerized with S and MA. Thermal stability and molecular weights (M_w and M_n) were determined for the polymer samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2494–2503, 2004