The role of the ratio (PEG:PPG) of a triblock copolymer (PPG‐b‐PEG‐b‐PPG) in the cure kinetics,miscibility and thermal and mechanical properties in an epoxy matrix

The aim of this study was to evaluate the role of different poly(ethylene glycol):poly(propylene glycol) (PEG:PPG) molar ratios in a triblock copolymer in the cure kinetics, miscibility and thermal and mechanical properties in an epoxy matrix. The poly(propylene glycol)‐block‐poly(ethylene glycol)‐block‐poly(propylene glycol) (PPG‐b‐PEG‐b‐PPG) triblock copolymers used had two different molecular masses: 3300 and 2000 g mol^?1. The mass concentration of PEG in the copolymer structure played a key role in the miscibility and cure kinetics of the blend as well as in the thermal–mechanical properties. Phase separation was observed only for blends formed with the 3300 g mol^?1 triblock copolymer at 20 wt%. Concerning thermal properties, the miscibility of the copolymer in the epoxy matrix reduced the T_g value by 13 °C, although a 62% increase in fracture toughness (K_IC) was observed. After the addition of PPG‐b‐PEG‐b‐PPG with 3300 g mol^?1 there was a reduction in the modulus of elasticity by 8% compared to the neat matrix; no significant changes were observed in T_g values for the immiscible system. The use of PPG‐b‐PEG‐b‐PPG with 2000 g mol^?1 reduced the modulus of elasticity by approximately 47% and increased toughness (K_IC) up to 43%. Finally, for the curing kinetics of all materials, the incorporation of the triblock copolymer PPG‐b‐PEG‐b‐PPG delayed the cure reaction of the DGEBA/DDM (DGEBA, diglycidyl ether of bisphenol A; DDM, Q3‐4,4′‐Diaminodiphenylmethane) system when there is miscibility and accelerated the cure reaction when it is immiscible. All experimental curing reactions could be fitted to the Kamal autocatalytic model presenting an excellent agreement with experimental data. This model was able to capture some interesting features of the addition of triblock copolymers in an epoxy resin. © 2018 Society of Chemical Industry     

Synthesis and properties of styrene–butadiene–oxyethylene multiblock polymers

Multiblock copolymers of styrene, butadiene, and ethylene oxide were synthesized by coupling together telechelic dihydroxyl polystyrene, telechelic dihydroxyl polybutadiene, and poly(ethylene glycol), using 2,4-toluene diisocyanate as coupling agent. The copolymers were purified by extractions and characterized by infrared (IR), ¹H nuclear magnetic resonace (NMR), gel permeation chromatography (GPC), transmission electron microscopy (TEM), membrane osmometry, and dynamic viscoelastometry. The multiblock copolymers are amphiphilic, exhibiting very good emulsifying properties. They possess a good phase transfer catalytic ability in Williamson reaction, and their LiClO₄ complexes exhibit a conductivity above 1 × 10⁻⁴ S/cm at 35°C. © 1996 John Wiley & Sons, Inc.     

New optically active poly(amide–imide–urethane) thermoplastic elastomers derived from poly(ethylene glycol diols), 4,4′‐methylene‐bis(4‐phenylisocyanate), and a diacid based on an amino acid by a two‐step method under microwave irradiation

A new class of optically active poly(amide–imide–urethane)s (PAIUs) was synthesized via a two‐step diisocyanate route under microwave irradiation. In these reactions, 4,4′‐methylene‐bis(4‐phenylisocyanate) was reacted with bis(p‐amido benzoic acid)‐N‐trimellitylimido‐L ‐leucine and poly(ethylene glycol diol)s (PEGs), such as PEG‐400, PEG‐600, PEG‐1000, and PEG‐2000, to furnish a series of new PAIUs. The effects of different reaction conditions, such as the method of preparation (polyol or acid chain extension), the prepolymerization step (NCO‐terminated oligoamide or NCO‐terminated polyether polyol), the irradiation time and power, the reaction solvent, the soft‐segment length, and the presence or absence of reaction catalysts (e.g., triethylamine, pyridine, and dibutyltin dilaurate), on the properties of the copolymers, including the solubility, viscosity, and thermal behavior, were investigated. The resulting multiblock copolymers had inherent viscosities of 0.15–0.53 dL/g. These multiblock copolymers were optically active, thermally stable, and soluble in amide‐type solvents. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1781–1792, 2005     

Catalyst free synthesis of poly(l‐lactic acid)–poly(propylene glycol) multiblock copolymers and their properties

A simple, green, and economical method for the synthesis of poly(l ‐lactic acid)–poly(propylene glycol) (PLLA–PPG) copolymers is put forward and a series of multiblock PLLA–PPG are synthesized with 1,6‐hexamethylene diisocyanate as chain extender of the melt polymerization. The effect of PPG content on the properties of PLLA–PPG copolymers is also investigated. The elongation at break of the resulting copolymer film with only 5% weight content PPG is 280%, and the tensile strength is 20 MPa. Dynamic mechanical analysis results demonstrated the existence of the shape memory effect for all the copolymers films and the shape recovery ratio of 101% is achieved for PLLA–PPG copolymer film with 5% weight PPG. The process for the synthesis of PLLA–PPG copolymers in the total absence of potentially toxic solvents and catalysts is analyzed, and the films of PLLA–PPG exhibit toughness and shape memory effect. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45299.     

Biodegradable and photocurable multiblock copolymers with shape‐memory properties from poly(ε‐caprolactone) diol,poly(ethylene glycol), and 5‐cinnamoyloxyisophthalic acid

Biodegradable and photocurable multiblock copolymers of various compositions were synthesized by the high‐temperature solution polycondensation of poly(ε‐caprolactone) (PCL) diols of molecular weight (M_n) = 3000 and poly(ethylene glycol)s (PEG) of M_n = 3000 with a dichloride of 5‐cinnamoyloxyisophthalic acid (ICA) as a chain extender, followed by irradiation by a 400 W high‐pressure mercury lamp (λ > 280 nm) to form a network structure. The gel contents increased with photocuring time, reaching a level of over 90% after 10 min for all copolymers without a photoinitiator. The thermal and mechanical properties of the photocured copolymers were examined by DSC and tensile tests. In cyclic thermomechanical tensile tests, the photocured ICA/PCL/PEG copolymer films showed good shape‐memory properties at 37–60°C, with both shape fixity ratio and shape recovery ratio over 90% at a maximum tensile strain of 100–300%. The water absorption of these copolymers and their rate of degradation in a phosphate buffer solution (pH 7.0) at 37°C increased significantly with increasing PEG content. The novel photocured ICA/PCL/PEG multiblock copolymers are potentially useful in biomedical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and aggregation behavior of four types of different shaped PCL‐PEG block copolymers

Biodegradable, amphiphilic, linear (diblock and triblock) and star‐shaped (three‐armed and four‐armed) poly[(ethylene glycol)‐block‐(ε‐caprolactone)] copolymers (PEG–PCL copolymers) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL) with stannous octoate as a catalyst, in the presence of monomethoxypoly(ethylene glycol) (MPEG), poly(ethylene glycol) (PEG), three‐armed poly(ethylene glycol) (3‐arm PEG) or four‐armed poly(ethylene glycol) (4‐arm PEG) as an initiator, respectively. The monomer‐to‐initiator ratio was varied to obtain copolymers with various PEG weight fractions in a range 66–86%. The molecular structure and crystallinity of the copolymers, and their aggregation behavior in the aqueous phase, were investigated by employing ¹H‐NMR spectroscopy, gel permeation chromatography and differential scanning calorimetry, as well as utilizing the observational data of gel–sol transitions and aggregates in aqueous solutions. The aggregates of the PEG–PCL block copolymers were prepared by directly dissolving them in water or by employing precipitation/solvent evaporation technique. The enthalpy of fusion (ΔH_m), enthalpy of crystallization (ΔH_crys) and degrees of crystallinity (χ_c) of PEG blocks in copolymers and the copolymer aggregates in aqueous solutions were influenced by their PEG weight fractions and molecular architecture. The gel–sol transition properties of the PEG–PCL block copolymers were related to their concentrations, composition and molecular architecture. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of graft copolymers of syndiotactic polystyrene with polybutadiene and 4‐methylstyrene

The basic method for synthesizing syndiotactic polystyrene‐g‐polybutadiene graft copolymers was investigated. First, the syndiotactic polystyrene copolymer, poly(styrene‐co‐4‐methylstyrene), was prepared by the copolymerization of styrene and 4‐methylstyrene monomer with a trichloro(pentamethyl cyclopentadienyl) titanium(IV)/modified methylaluminoxane system as a metallocene catalyst at 50°C. Then, the polymerization proceeded in an argon atmosphere at the ambient pressure, and after purification by extraction, the copolymer structure was confirmed with ¹H‐NMR. Lastly, the copolymer was grafted with polybutadiene (a ready‐made commercialized unsaturated elastomer) by anionic grafting reactions with a metallation reagent. In this step, poly(styrene‐co‐4‐methylstyrene) was deprotonated at the methyl group of 4‐methylstyrene by butyl lithium and further reacted with polybutadiene to graft polybutadiene onto the deprotonated methyl of the poly(styrene‐co‐4‐methylstyrene) backbone. After purification of the graft copolymer by Soxhlet extraction, the grafting reaction copolymer structure was confirmed with ¹H‐NMR. These graft copolymers showed high melting temperatures (240–250°C) and were different from normal anionic styrene–butadiene copolymers because of the presence of crystalline syndiotactic polystyrene segments. Usually, highly syndiotactic polystyrene has a glass‐transition temperature of 100°C and behaves like a glassy polymer (possessing brittle mechanical properties) at room temperature. Thus, the graft copolymer can be used as a compatibilizer in syndiotactic polystyrene blends to modify the mechanical properties to compensate for the glassy properties of pure syndiotactic polystyrene at room temperature. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Multiblock copolymers based on segments of poly (D,L‐lactic‐glycolic acid) and poly(ethylene glycol) or poly(ϵ‐caprolactone): A comparison of their thermal properties and degradation behavior

A comparison of the thermal properties of two classes of poly(D,L ‐lactic‐glycolic acid) multiblock copolymers is reported. In particular, the results of differential scanning calorimetry, and thermogravimetric analysis of copolymers containing poly(ethylene glycol) (PEG) or diol‐terminated poly(ϵ‐caprolactone) (PCDT) segments are described. The influence of the chemical structure and the length of PEG and PCDT on thermal stability, degree of crystallinity and glass transition temperature (T_g ) is discussed. Finally, an evaluation of the hydrolytic behavior in conditions mimicking the physiological environment is reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1721–1728, 2000     

Synthesis,characterization, and permeation properties of polyether-based polyurethanes

A system of synthesis of polyether-based urethanes was developed which had sufficient flexibility in composition so that transport properties could be optimized. Mixtures of poly(oxyethylene) glycol (PEG) and poly(oxypropylene) glycol (PPG) of a variety of molecular weights were tied together by varying amounts of kinds of “hard segments.” Thus, the water swell, the mechanical properties, and the size of the soft blocks and hard blocks could be varied. With a fixed content of hard segments, the water absorption decreased with decrease in the PEG/PPG ratio, demonstrating the feasibility of producing controlled changes in hydrophilicity of the polymer without significant change in the mechanical strength. Some polyurethanes based on PEG 600 and PPG 425 had a very good high value of P_w/P_s but a somewhat low value of P_w. The polyurethanes prepared by using phenylenediamines as chain extenders had markedly enhanced modulus and an extended rubbery plateau region, as anticipated.     

Synthesis,characterization and properties of amphiphilic butadiene-oxyethylene multiblock copolymers

Butadiene-oxyethylene multiblock copolymers were synthesized via coupling reaction of telechelic α,ω-dihydroxypolybutadiene (PB) and poly(ethylene glycol) with tolylene-2,4-diisocyanate. The poly(oxyethylene) (PEO) content of the purified copolymer was determined by elemental analysis and the structural parameters were calculated from number-average molecular weights of the purified copolymer, determined by membrane osmometry, and those of the prepolymers, determined by vapor pressure osmometry. The total number of blocks varied from 60 to 100. Transmission electron microscopy showed the existence of multiphases in the copolymer. Wide angle X-ray diffraction indicated that the crystallinity increased from 0 to 50% with increasing weight ratio of PEO/PB. These multiblock copolymers exhibit excellent emulsifying properties, as compared to the multiblock copolymers or graft copolymer of oxyethylene and styrene. Only 0.1 g of polymer was needed to make 100 mL of a water/toluene (9:1, w/w) mixture form an emulsion completely. When the weight ratio of water/toluene was changed from 9:1 to 7:3 or the molecular weight of PEG from 6000 to 2000, the oil-in-water type emulsion was changed to water-in-oil type. The copolymers also showed a good phase transfer catalytic effect when applied to the Williamson reaction. Conversion of potassium phenolate into butyl phenolate reached over 95% when the multiblock copolymer containing 3 mmol of PEO was used for 1 g potassium phenolate, whereas no reaction occurred without using the multiblock copolymer at 90°C for 4 h.     

Synthesis of PMMA‐PTHF‐PMMA and PMMA‐PTHF‐PST linear and star block copolymers

Combination of cationic, redox free radical, and thermal free radical polymerizations was performed to obtain linear and star polytetramethylene oxide (poly‐THF)‐polymethyl methacrylate (PMMA)/polystyrene (PSt) multiblock copolymers. Cationic polymerization of THF was initiated by the mixture of AgSbF₆ and bis(4,4′ bromo‐methyl benzoyl) peroxide (BBP) or bis (3,5,3′,5′ dibromomethyl benzoyl) peroxide (BDBP) at 20°C to obtain linear and star poly‐THF initiators with M_w varying from 7,500 to 59,000 Da. Poly‐THF samples with hydroxyl ends were used in the methyl methacrylate (MMA) polymerization in the presence of Ce(IV) salt at 40°C to obtain poly(THF‐b‐MMA) block copolymers containing the peroxide group in the middle. Poly(MMA‐b‐THF) linear and star block copolymers having the peroxide group in the chain were used in the polymerization of methyl methacrylate (MMA) and styrene (St) at 80°C to obtain PMMA‐b‐PTHF‐b‐PMMA and PMMA‐b‐PTHF‐b‐PSt linear and star multiblock copolymers. Polymers obtained were characterizated by GPC, FT‐IR, DSC, TGA, ¹H‐NMR, and ¹³C‐NMR techniques and the fractional precipitation method. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 219–226, 2004     

Novel amphiphilic poly(ester‐urethane)s based on poly[(R)‐3‐hydroxyalkanoate]: synthesis,biocompatibility and aggregation in aqueous solution

BACKGROUND: The aim of this work was to develop polyhydroxyalkanoates (PHAs) for blood contact applications, and to study their self‐assembly behavior in aqueous solution when the PHAs are incorporated with hydrophilic segments. To do this, poly(ester‐urethane) (PU) multiblock copolymers were prepared from hydroxyl‐terminated poly(ethylene glycol) (PEG) and hydroxylated poly[(R)‐3‐hydroxyalkanoate] (PHA‐diol) using 1,6‐hexamethylene diisocyanate as a coupling reagent. The PEG segment functions as a soft, hydrophilic and crystalline portion and the poly[(R)‐3‐hydroxybutyrate] segment behaves as a hard, hydrophobic and crystalline portion. In another series of PU multiblock copolymers, crystalline PEG and completely amorphous poly[((R)‐3‐hydroxybutyrate)‐co‐(4‐hydroxybutyrate)] behaved as hydrophobic and hydrophilic segments, respectively. RESULTS: The formation of a PU series of block copolymers was confirmed by NMR, gel permeation chromatography and infrared analyses. The thermal properties showed enhanced thermal stability with semi‐crystalline morphology via incorporation of PEG. Interestingly, the changes of the hydrophilic/hydrophobic ratio led to different formations in oil‐in‐water emulsion and surface patterning behavior when cast into films. Blood compatibility was also increased with increasing PEG content compared with PHA‐only polymers. CONCLUSION: For the first time, PHA‐based PU block copolymers have been investigated in terms of their blood compatibility and aggregation behavior in aqueous solution. Novel amphiphilic materials with good biocompatibility for possible blood contact applications with hydrogel properties were obtained. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of statistical copolymers of styrene and 4‐(1‐hydroxyalkyl)styrene

A family of new polymers based on poly(4‐(1‐hydroxyalkyl)styrene), and its copolymers with styrene were synthesized and thoroughly characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, and UV spectroscopies. The chemical modification reactions of polystyrene (PS) was used as a novel method of performing the synthesis of poly(4‐(1‐hydroxyethyl‐co‐styrene)), poly(4‐(1‐hydroxypropyl‐co‐styrene)), poly(4‐(1‐hydroxybutyl‐co‐styrene)), and poly(4‐(1‐hydroxyphenylmethyl‐co‐styrene)). The novelty of this method lies in the incorporation of the desired mol % of the functional groups in polystyrene chain, to obtain random copolymers of desired composition. In preliminary testing/evaluation studies the utility and versatility of the new copolymers, which have the potential to be negative‐tone photoresist materials, were studied. Thus a few photoresist formulations based on poly(styrene‐co‐4‐(1‐hydroxyalkylstyrene)) were developed with 5 wt % of a photoacid generator. These studies suggested that the new copolymers synthesized by a simple and alternate method could have the same potential as a photoresist material when compared with the polymers synthesized by the polymerization of the corresponding functional monomer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1902–1914, 2004     

Stereocomplex formation between enantiomeric PLA–PEG–PLA triblock copolymers: Characterization and use as protein‐delivery microparticulate carriers

Two enantiomeric triblock ABA copolymers composed of poly(L ‐lactide)–poly(ethylene glycol)–poly(L ‐lactide) (PLLA–PEG–PLLA) and poly(D ‐lactide)–poly(ethylene glycol)–poly(D ‐lactide) (PDLA–PEG–PDLA) were synthesized with two different middle‐block PEG chain lengths by ring‐opening polymerization of L ‐lactide and D ‐lactide in the presence of PEG, respectively. A pair of enantiomeric triblock copolymers were combined to form a stereocomplex by a solvent‐casting method. The triblock copolymers and their stereocomplexes were characterized by ¹H‐ and ¹³C‐NMR spectroscopy and gel permeation chromatography. Their crystalline structures and crystalline melting behaviors were analyzed by the wide‐angle X‐ray diffraction method and differential scanning calorimetry. The stereocomplex formed between a pair of enantiomeric triblock copolymers exhibited a higher crystalline melting temperature with a distinctive 3/1 helical crystalline structure. PLLA–PEG–PLLA and its stereocomplex with PDLA–PEG–PDLA were used to fabricate a series of microspheres encapsulating a model protein drug, bovine serum albumin (BSA). They were prepared by a double‐emulsion solvent‐evaporation method. The morphological aspects of the microspheres were characterized and BSA release profiles from them were investigated. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1615–1623, 2000     

Study on a new kind of polypropylene‐graft‐ polystyrene: Preparation and application

A novel synthetic route for preparing polypropylene‐graft‐polystyrene (PP‐g‐PSt) was set up. With this synthetic route, a series of PP‐g‐PSt copolymers containing different percentages of polystyrene chain were synthesized, based on the different reactivities of two kinds of C? C double bonds on 4‐(3‐butenyl) styrene. Characterization data, including ¹H‐NMR, ¹³C‐NMR, GPC, and DSC, demonstrated that the graft copolymers were all very pure. Furthermore, it was also attempted to use this new kind of propylene–styrene graft copolymer as a compatibilizer. DMA and SEM results illustrated that the PP‐g‐PSt obtained is an efficient compatibilizer for the polypropylene–polystyrene blend. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 314–322, 2004     

In Situ synthesis of multiblock copolymers of poly(ϵ‐caprolactone) with different poly(ether diols) based polyurethane by reactive extrusion

Polyurethanes with multiblock copolymers of poly(?‐caprolactone) (PCL) and poly(tetramethylene oxide) glycol (PTMG) or poly(ethylene glycol) (PEG) as a soft segment were synthesized in situ via reactive extrusion from ?‐caprolactone (CL) and 4,4′‐diphenylmethane diisocyanate (MDI). The titanium alkoxide mixture generated from an ester‐exchange reaction between titanium propoxide [Ti(OPr)₄], and excessive PTMG or PEG was used as an initiator and catalyst. Compared to the reported fabrication of polycaprolactone‐based polyurethane (PCLU), the in situ reactive extrusion preparation not only explored a new rapid route for the fabrication of PCLU but also offered a simplified, controllable approach for the production of PCLU in a successive mass scale. A series of PTMG–PCLUs and PEG–PCLUs with different PCL block‐average degrees of polymerization (DP_n's) were prepared by only an adjustment of the relative concentration of CL in the reaction system, with a certain constant molar ratio of MDI to titanium alkoxide. ¹H‐NMR, gel permeation chromatography, and differential scanning calorimetry results indicate that all of the CL monomers were converted in the polymerization, and the molecular weight of the copolymers was about 8 × 10⁴ g/mol with a polydispersity index of approximate 2.4. With an increase in the PCL block‐average DP_n in PTMG–PCLU from 25 to 40, the tensile strength increased from 16.5 to 22.7 MPa, and the melting point increased from 46.1 to 49.5°C. It was also verified by PEG–PCLU prepared with organic Ti of lowered content in the initiator mixture that the mechanical properties could be greatly affected and dropped with decreasing content of organic Ti in the initiator mixture. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of poly(oxyethylene)–poly(caprolactone) multiblock copolymers

Novel poly(oxyethylene)/poly(caprolactone) POE/PCL copolymers were synthesized by step growth polymerization of poly(ε-caprolactone) diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. The reaction was performed at room temperature and yielded multiblock copolymers with predetermined POE and PCL block lengths. The resulting copolymers were characterized by various analytical techniques including SEC, IR, ¹H NMR, DSC and X-ray diffractometry. Data showed that the properties of these polymers can be modulated by adjusting the chain lengths of the macromonomers. In particular, one or two crystalline structures can exist within the copolymers of various crystallinities. © 1998 SCI.     

Hydrolytic degradation of poly(oxyethylene)–poly-(ε-caprolactone) multiblock copolymers

The degradation of poly(oxyethylene)–poly(ε-caprolactone) (POE–PCL) multiblock copolymers was investigated at 37°C in a 0.13M, pH 7.4 phosphate buffer selected to mimic in vivo conditions. The copolymers were obtained by coupling polycaprolactone diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. Various techniques, such as weighing, size exclusion chromatography, infrared, ¹H nuclear magnetic resonance, differential scanning calorimetry, and X-ray diffractometry, were used to monitor changes in total mass, water absorption, molar mass, thermal properties, degree of crystallinity, and composition. The results showed that introduction of POE sequences considerably increased the hydrophilicity of the copolymers as compared with PCL homopolymers. Nevertheless, the degradability of PCL sequences was not enhanced due to the phase separation between the two components. Significant morphological changes were also observed during the degradation. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 989–998, 1998     

Electrostatic dissipation and flexibility of poly(oxyalkylene)amine segmented epoxy derivatives

A family of hydrophilic and flexible epoxy polymers was prepared from the reaction of poly(oxyalkylene)amines and diglycidyl ether of bisphenol‐A (DGEBA) at 1:1 molar ratio of N H to epoxide. The use of a high molecular weight (M_W = 1000–6000) poly(oxyethylene–oxypropylene)amine and a low M_W amine as curing agents provided epoxy materials with good properties in toughness and hydrophilicity. The hydrophilicity, probed by surface resistivity of these cured materials, was found to be affected by the nature and weight content of poly(oxyethylene) segment in the polymer backbone, and also by the degree of crystallinity. Specifically, in the presence of a water‐soluble poly(oxyethylene–oxypropylene)diamine of M_W 2000 the cured epoxies can reach surface resistivity as low as 10^8.6–9.6 Ω/□. In comparison, the water‐insoluble poly(oxypropylene)diamine of M_W 2000 afforded a higher surface resistivity of 10^10.5 Ω/□ because of the difference in hydrophilicity between oxyethylene and oxypropylene functionalities. Poly(oxypropylene)diamine of M_W 230 as the sole curing agent generated an epoxy with even higher surface resistivity of 10¹³ Ω/□ due to a highly crosslinking structure. With proper selection of mixed poly(oxyethylene–oxypropylene)diamine (25 wt%) and 2‐aminoethanol (9 wt%), the DGEBA cured polymer had an appropriate surface resistivity of 10^9.8 Ω/□ for antistatics. Moreover, this material was extremely ductile in appearance and showed over 500 % elongation at break during mechanical tests. The high flexibility is rationalized by the balanced chemical structure of poly(oxyalkylene) segments and bisphenol‐A distributed in a slightly crosslinked system. © 2000 Society of Chemical Industry     

Preparation and surfactancy of branched copolymers from poly(oxyalkylene)‐amine and trichlorotriazine coupling

A family of branched and block copolymers consisting of poly(oxyalkylene) segments was prepared by using 2,4,6‐trichloro‐1,3,5‐triazine as the amine coupling agent. The copolymers were characterized to have a high molecular weight of up to 22,600 g/mol (Mn) and be thermally stable due to the presence of triazine cores and reactive chloride functionalities. Using the trifunctional poly(oxypropylene)‐block amines as the starting material and a two‐step coupling process, the prepared copolymers are star‐shape or branched, multiple‐block copolymers, with a versatile solubility in water or organic solvents. Further variation in amine structures of hydrophobic poly(oxypropylene) (POP‐) and hydrophilic poly(oxyethylene) (POE‐) blocks may allow the prepared copolymers to be amphiphilic. As an example, the triazine/POP T‐5000/POE ED‐2001 copolymer behaves as a surfactant and exhibits the capability of reducing toluene/water interfacial tension until 1.3 mN/m at critical association concentration as low as 0.001 wt %. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 29–36, 2005