Synthesis and photoluminescence properties of CaGd2(MoO4)4:Eu3+ red phosphors

The novel red-emitting Eu³⁺ ions activated CaGd₂(MoO₄)₄ phosphors were prepared by a citrate sol–gel method. The X-ray diffraction patterns confirmed their tetragonal structure when the samples were annealed above 600 °C. The photoluminescence excitation spectra of CaGd₂(MoO₄)₄:Eu³⁺ phosphors exhibited the charge transfer band (CTB) and intense f–f transitions of Eu³⁺ ion. The optimized annealing temperature and Eu³⁺ ion concentration were analyzed for CaGd₂(MoO₄)₄:Eu³⁺ phosphors based on the dominant red (⁵D₀→⁷F₂) emission intensity under NUV (394 nm) excitation. All decay curves were well fitted by the single exponential function. These luminescent powders are expected to find potential applications such as WLEDs and optical display systems.     

A novel scheelite-type LiCaGd(WO4)3:Eu3+ red phosphors with prominent thermal stability and high quantum efficiency

A series of LiCaGd(WO4)3 : xEu³⁺ (0 ≤ x ≤ 1.0) red phosphors with tetragonal scheelite structure were synthesized via the conventional solid-state reaction. Their crystal structure, photoluminescence excitation (PLE), and photoluminescence (PL) spectra, thermal stability and quantum efficiency were investigated. The phosphors exhibit a typical red light upon 395 nm near ultraviolet excitation, and the strongest emission peak at 617 nm is dominated by the ⁵D₀→⁷F₂ transition of Eu³⁺ ions. The PL intensity of the phosphors gradually increases with the increase of Eu³⁺ doping concentration, and the concentration quenching phenomenon is hardly observed. The quantum efficiency and the color purity of the phosphor reach maximum values of about 94.2 and 96.6% at x = 1.0, respectively. More importantly, LiCaGd(WO₄)₃:xEu³⁺ phosphors have prominent thermal stability. The temperature-dependent PL intensity of the phosphors at 423 K is only reduced to 89.1% of the PL intensity at 303 K, which is superior to that of commercial red phosphors Y₂O₃:Eu³⁺. Finally, LiCaGd(WO₄)₃:Eu³⁺ phosphor is packaged with near ultraviolet InGaN chips to fabricate white light emitting diodes, which has a low color temperature (CCT = 4622 K) and a high color rendering index (CRI= 89.6).     

Photoluminescence properties of Eu-doped WO3-Eu2(WO4)3 composites and single-phase Eu2(WO4)3 powders

The development of highly stable and efficient oxide-based red phosphors is urgently required for next-generation lighting devices. Herein, we report the micro/crystal structures and luminescent properties of single-phase Eu₂(WO₄)₃ and Eu³⁺-doped WO₃-Eu₂(WO₄)₃ composite phosphors prepared by a one-step conventional solid-state reaction method in air atmosphere. As increasing Eu contents in the mixtures of WO₃ and Eu₂O₃, the intensities of the X-ray diffraction peaks of Eu₂(WO₄)₃ increased while that of WO₃ decreased. The photoluminescence intensity of the synthesized phosphors increased with increase in the Eu content when calcined at 900 °C, while it degraded at a higher temperature. Red-emitting single-phase Eu₂(WO₄)₃ powders were successfully obtained when the WO₃ and Eu₂O₃ powders were calcined in the ratio of 3:1. The intensity of the red emission spectra of the Eu₂(WO₄)₃ phosphor was higher than those of the 6, 12, and 24 at.% Eu-added WO₃ composites at excitation wavelengths of 394 and 465 nm. On the other hand, the intensity of emission from the single-phase phosphor was lower than that of the Eu-doped WO₃-Eu₂(WO₄)₃ composites under excitation of UV light at 254 nm. Thus, we propose two prospective phosphors for application as red phosphors at various wavelengths.     

A novel dazzling Eu3+‐doped whitlockite‐type phosphate red‐emitting phosphor for white light‐emitting diodes

A series of novel red‐emitting Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors were successfully synthesized using the high‐temperature solid‐state reaction method. The crystal structure, photoluminescence spectra, thermal stability, and quantum efficiency of the phosphors were investigated as a function of Eu³⁺ concentration. Detailed analysis of their structural properties revealed that all the phosphors could be assigned as whitlockite‐type β‐Ca₃(PO₄)₂ structures. Both the PL emission spectra and decay curves suggest that emission intensity is largely dependent on Eu³⁺ concentration, with no quenching as the Eu³⁺ concentration approaches 100%. A dominant red emission band centered at 611 nm indicates that Eu³⁺ occupies a low symmetry sites within the Ca₈ZnLa(PO₄)₇ host lattice, which was confirm by Judd‐Ofelt theory. Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors exhibited good color coordinates (0.6516, 0.3480), high color purity (~96.3%), and high quantum efficiency (~78%). Temperature‐dependent emission spectra showed that the phosphors possessed good thermal stability. A white light‐emitting diode (LED) device were fabricated by integrating a mixture of obtained phosphors, commercial green‐emitting and blue‐emitting phosphors into a near‐ultraviolet LED chip. The fabricated white LED device emits glaring white light with high color rendering index (83.9) and proper correlated color temperature (5570 K). These results demonstrate that the Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors are a promising candidate for solid‐state lighting.     

Crystal structure and luminescence properties of novel Sr10−x(SiO4)3(SO4)3O:xEu2+ phosphor with apatite structure

In this paper, a series of novel luminescent Sr_10−x(SiO₄)₃(SO₄)₃O:xEu²⁺ phosphors with apatite structure were synthesized by a high temperature solid-state reaction. The phase structure, photoluminescence (PL) properties, as well as the PL thermal stability were investigated. Sr_9.92(SiO₄)₃(SO₄)₃O:0.08Eu²⁺ phosphor exhibits better thermal quenching resistance, retaining the luminance of 66.55% at 150 °C compared with that at 25 °C. The quenching concentration of Eu²⁺ in Sr₁₀(SiO₄)₃(SO₄)₃O was about 0.08 (mol) with the dipole–quadrupole interaction. The Sr_10−x(SiO₄)₃(SO₄)₃O:xEu²⁺ phosphors exhibited a broad-band green emission at 538 nm upon excitation at 396 nm. The results indicate that Sr_10−x(SiO₄)₃(SO₄)₃O:xEu²⁺ phosphors have potential applications as near UV-convertible phosphors for white-light UV LEDs.     

Tunable photoluminescence of apatite phosphor Ca5.95−xSrxLa4(SiO4)2(PO4)4O2:0.05Eu2+ and its application in light-emitting diodes

A series of new apatite phosphors Ca_5.95−xSr_xLa₄(SiO₄)₂(PO₄)₄O₂:0.05Eu²⁺ (x = 0-5.95) were prepared with the solid-state method. The variations of the occupation rate and cell parameters were investigated in detail, demonstrating that the phosphors are pure phases and that the different occupation rates of La³⁺, Ca²⁺, and Sr²⁺ ions are due to the different electrostatic bond strengths. The reflectance and photoluminescence excitation spectra prove that the phosphors can be efficiently excited with near-ultraviolet (n-UV) light. The broad redshift (50 nm) in the photoluminescence spectra is attributed to the increase in the crystal field splitting when the Ca²⁺ ion is replaced by the larger Sr²⁺ ion. At 150°C, the obtained phosphors maintain an emission intensity of ~67%-77% of that at room temperature (25°C), which indicates relatively the high performance of apatite phosphors in the temperature-dependence experiment. Because of the substitution of the small Ca²⁺ ion by the large Sr²⁺ ion, the emission color changes from green to yellow. Finally, a series of self-made light emitting diodes lamps were fabricated by coating the Ca_5.95−xSr_xLa₄(SiO₄)₂(PO₄)₄O₂:0.05Eu²⁺ phosphors with commercial blue and red phosphors on an n-UV chip (λ_ex = 370 nm). The self-made white-emitting lamps display a continuous changing correlated color temperature (4053-9353 K) or commission international de L'eclairgae (from [0.29, 0.28] to [0.38, 0.37]), implying that the series apatite phosphors have great potential to meet the different requirements of applications.     

Microwave Sol–Gel Synthesis of CaGd2(MoO4)4:Er3+/Yb3+ Phosphors and Their Upconversion Photoluminescence Properties

CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ phosphors with the doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0.05, 0.1, 0.2, and Yb³⁺ = 0.2, 0.45) have been successfully synthesized by the microwave sol–gel method, and the crystal structure refinement and upconversion photoluminescence properties have been investigated. The synthesized particles, being formed after heat‐treatment at 900°C for 16 h, showed a well‐crystallized morphology. Under the excitation at 980 nm, CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ particles exhibited strong 525 and 550‐nm emission bands in the green region and a weak 655‐nm emission band in the red region. The Raman spectrum of undoped CaGd₂(MoO₄)₄ revealed about 15 narrow lines. The strongest band observed at 903 cm^?1 was assigned to the ν₁ symmetric stretching vibration of MoO₄ tetrahedrons. The spectra of the samples doped with Er and Yb obtained under 514.5 nm excitation were dominated by Er³⁺ luminescence preventing the recording Raman spectra of these samples. Concentration quenching of the erbium luminescence at ²H_11/2→⁴I_15/2 and ⁴S_3/2→⁴I_15/2 transitions in the CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ crystal structure was established to be approximately at the 10 at.% doping level.     

Tunable full color emission from single-phase LiSr3.99−xDy0.01(BO3)3:xEu3+ phosphors

Tunable full color emissive LiSr_3.99?xDy_0.01(BO₃)₃:xEu³⁺ (0≤x≤0.09) phosphors peaked at 481 nm (blue), 574 nm (yellow), 592 nm (orange), and 617 nm (red) were synthesized in air by high temperature solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction (XRD), photoluminescence excitation (PLE) and photoluminescence (PL) spectra. The PLE spectra in the range from 200 to 500 nm include an Eu–O charge transfer band (CTB) and several 4f–4f transition peaks of Dy³⁺ and Eu³⁺, indicating its potential application in white light emitting diodes (LEDs). The effect of Eu³⁺ concentration on the emission intensity of LiSr_3.99?xDy_0.01(BO₃)₃:xEu³⁺ phosphors was investigated in detail and the optical concentration is found to be x=0.005. The CIE chromaticity coordinates for LiSr_3.99?xDy_0.01(BO₃)₃:xEu³⁺ phosphors are simulated. With an increase in Eu³⁺ ion concentration, the chromaticity color coordinates can be tuned efficiently from the border of greenish white region to its equal-energy white light point, and eventually to red region. All the results imply that the studied LiSr_3.99?xDy_0.01(BO₃)₃:xEu³⁺ phosphors could be potentially used as white LEDs.     

Preparation and Luminescence Properties of Blue‐emitting Phosphor Ba2Ca(PO4)2:Eu2+

Using the conventional high temperature solid‐state reaction method Ba₂Ca(PO₄)₂:Eu²⁺ phosphors were prepared. The phase structure, photoluminescence (PL) properties, and the PL thermal stability of the samples were investigated, respectively. Under the excitation at 365 nm, the phosphor exhibited an asymmetric broad‐band blue emission with peak at 454 nm, which is ascribed to the 4f–5d transition of Eu²⁺. It was further proved that the dipole–dipole interactions results in the concentration quenching of Eu²⁺ in Ba₂Ca_1?x (PO₄)₂:xEu²⁺ phosphors. When the temperature turned up to 150°C, the emission intensity of Ba₂Ca_0.99(PO₄)₂:0.01Eu²⁺ phosphor was 59.07% of the initial value at room temperature. The activation energy ΔE was calculated to be 0.30 eV, which proved the good thermal stability of the sample. All the properties indicated that the blue‐emitting Ba₂Ca(PO₄)₂:Eu²⁺ phosphor has potential application in white LEDs.     

Sr3Lu (VO4)3: Eu3+ red-emitting phosphors for warm white LEDs

A series of novel red emission phosphors Sr₃Lu_1-x(VO₄)₃:xEu³⁺(x = 0.007, 0.009, 0.02, 0.04, 0.06) were synthesized successfully by traditional high-temperature solid-state reaction. The results of X-ray diffraction (XRD) reveal the doped Eu³⁺ ions have replaced the lattice sites of Lu³⁺ ions. The diffuse reflectance spectra illustrate the energy gap of Sr₃Lu(VO₄)₃ host is 3.61 eV. The room-temperature steady-state fluorescence spectra show that these phosphors can be effectively pumped by the charge-transfer band (CTB) of the host in near ultraviolet (NUV) spectral region and then produce strong and pure red emission at 615 nm originated from ⁵D₀ → ⁷F₂ electric dipole transition of Eu³⁺. The Commission Internationale de L’Eclairage (CIE) coordinates of Sr₃Lu_0.96(VO₄)₃:0.04Eu³⁺ are (x = 0.65, y = 0.35), which are very close to the red standard of National Television Standards Committee NTSC (0.67, 0.33). The fabricated warm white-light-emitting diodes (LED) demonstrate high color-rendering index Ra as 93. The results imply the red-emitting Sr₃Lu(VO₄)₃:Eu³⁺ phosphors could be potentially utilized in the fields of solid-state lighting.     

Potential red-emitting NaGd(MO4)2:R (M=W,Mo, R=Eu,Sm, Bi) phosphors for white light emitting diodes applications

NaGd(MO₄)₂:R (M=W, Mo, R=Eu³⁺, Sm³⁺, Bi³⁺) phosphors were synthesized by solid-state reaction. The structure and photoluminescence properties of the samples were characterized using X-ray powder diffraction and fluorescence spectrophotometry. The ⁵D₀→⁷F₂ transition of Eu³⁺, which led to a red emission of the phosphors, was dominantly observed in the photoluminescence spectra. The doped Bi³⁺ and Sm³⁺ efficiently sensitized the emission of Eu³⁺ and effectively extended and strengthened the absorption of near-UV light with wavelengths ranging from 395 to 405 nm. In addition, energy transfers from Bi³⁺ to Eu³⁺ and from Sm³⁺ to Eu³⁺ occurred. The chromaticity coordinates of the obtained phosphors were close to the standard values of the National Television Standard Committee (x=0.670, y=0.330). The results suggest that NaGd(WO₄)_2−y(MoO₄)_y:Eu³⁺, Sm³⁺, Bi³⁺ is an efficient red-emitting phosphor for light-emitting diode applications.     

Near-ultraviolet light–induced dazzling red emission in CaGd2(MoO4)4:2xSm3+ compounds for phosphor-converted WLEDs

The Sm³⁺-activated CaGd₂(MoO₄)₄ phosphors were prepared through a sol-gel reaction route. From the results of excitation spectrum, three-dimensional emission spectra and contour lines, it was confirmed that the near-ultraviolet (NUV) light was the proper excitation light source for the synthesized phosphors. Under 405 nm irradiation, the luminescent behaviors of the studied samples were revealed to be dependent on the Sm³⁺ ion concentration and its optimal value of 0.03 mol was obtained. Through theoretical analysis, it is evident that the dipole-dipole interaction can be responsible for the involved concentration quenching mechanism in the final products and the critical distance was 39.7 Å. Moreover, the temperature-dependent emission spectra demonstrated that the studied samples had admirable thermal stability and the activation energy was decided to be 0.21 eV. Furthermore, the internal quantum efficiency of the Sm³⁺-activated CaGd₂(MoO₄)₄ phosphors was found to be 21.6%. Finally, to explore the practical applications of obtained compounds for indoor illumination, a white light-emitting diode (WLED) device which contained a NUV chip, prepared phosphors, and commercial blue-emitting and green-emitting phosphors was packaged. The packaged WLEDs device can emit dazzling white light with satisfied color coordinate of (0.305, 0.318), proper color rendering index (82.6), and correlated color temperature (7069 K).     

Synthesis,structural characterization,and photoluminescence properties of Eu3+‐doped Mg3‐xEux(BO3)2 phosphor

Eu³⁺‐doped Mg_3‐xEu_x(BO₃)₂ (x = 0.000, 0.005, 0.010, 0.020, 0.050, and 0.100) phosphors were synthesized for the first time by solution combustion synthesis method, which is a fast synthesis method for obtaining nano‐sized borate powders. The optimization of the synthesis conditions of phosphor materials was performed by TG/DTA method. These phosphors were characterized by XRD, FTIR, SEM‐EDX, and photoluminescence, PL analysis. The XRD analysis exhibited that all of the prepared ceramic compounds have been crystallized in orthorhombic structure with space group Pnnm. Also, the influence of europium dopant ions on unit cell parameters of host material was analyzed using Jana2006 program and the crystalline size was determined by Debye‐Scherrer's formula. The luminescence properties of all Eu³⁺‐doped samples were investigated by excitation and emission spectra. The excitation spectra of Mg_3‐xEu_x(BO₃)₂ phosphors show characteristic peak at 420 nm in addition to other characteristic peaks of Eu³⁺ under emission at 613 nm. The emission spectra of Eu³⁺‐doped samples indicated most intensive red emission band dominated at 630 nm belonging to ⁵D₀→⁷F₂ magnetic dipole transition. Furthermore, the optimum or quenching concentration of Eu³⁺ ion has been determined as x = 0.010 showed the maximum emission intensity when it was excited at 394 nm.     

The doping concentration dependent tunable yellow luminescence of Sr5(PO4)2(SiO4):Eu

Color tunable yellow-emitting phosphors of Sr_5−5xEu_5x(PO₄)₂SiO₄ (x = 0.05-0.15) were prepared by conventional solid-state reaction method. The X-ray powder diffraction patterns, the photoluminescence excitation and emission spectra were measured. The main excitation bands of the phosphors locate at a broad band extending from 300 to 500 nm, which can match the emission of ultraviolet- and blue-emitting diode chips. The tunable luminescence color was realized by the changing Eu²⁺ doping in Sr₅(PO₄)₂SiO₄. The structure and luminescence properties were investigated. Sr_5−5x(PO₄)₂SiO₄:Eu_5x displays two typical luminescence centers, which originate from two different Sr²⁺ (Eu²⁺) sites in the host. The site-occupation, the luminescence intensity and energy transfer between the Eu²⁺ ions occupying two different crystallographic Sr²⁺ sites were discussed on the base of the luminescence spectra and crystal structure. This is helpful to improve this phosphor for a potential application as a white light emitting diode phosphor.     

High luminescent brightness and thermal stability of red emitting Li3Ba2Y3(WO4)8:Eu3+ phosphor

A series of Li₃Ba₂Y_3−x(WO₄)₈:xEu³⁺ (x=0.1, 1, 1.5, 2 and 2.8) phosphors were synthesized by a high temperature solid-state reaction method. Under the excitation of near ultraviolet (NUV) light, the as-prepared phosphor exhibits intense red luminescence originating from the characteristic transitions of Eu³⁺ ions, which is 1.8 times as strong as the commercial Y₂O₂S:Eu³⁺ phosphor. The optimal doping concentration of Eu³⁺ ions here is confirmed as x=1.5. The electric dipole-quadrupole (D-Q) interaction is deduced to be responsible for concentration quenching of Eu³⁺ ions in the Li₃Ba₂Y₃(WO₄)₈ phosphor. The analysis of optical transition and Huang-Rhys factor reveals a weak electron-phonon coupling interaction. The temperature-dependent emission spectra also indicate that the as-prepared Li₃Ba₂Y₃(WO₄)₈:Eu³⁺ phosphor has better thermal stability than that of the commercial Y₂O₂S:Eu³⁺ phosphor. Therefore, our results show that the as-prepared Li₃Ba₂Y₃(WO₄)₈:Eu³⁺ phosphor is a promising candidate as red emitting component for white light emitting diodes (LEDs).     

Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Y(PO4)3 red phosphors

A series of red-emitting phosphors Eu³⁺-doped Sr₃Y(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Y(PO₄)₃:Eu³⁺ phosphors exhibit peaks associated with the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The integral intensity of the emission spectra of Sr₃Y_0.94(PO₄)₃:0.06Eu³⁺ phosphors excited at 392 nm is about 3.4 times higher than that of Y₂O₃:Eu³⁺ commercial red phosphor. The Commission Internationale de l’Eclairage chromaticity coordinates, the quantum efficiencies and decay times of the phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Y(PO₄)₃ phosphors are promising red-emitting phosphors pumped by near-UV light.     

Anti-thermal quenching of Eu3+ luminescence in negative thermal expansion Zr(WO4)2

Thermal quenching of luminescence is the most critical problem for rare earth doped phosphors used in light-emitting diodes (LEDs). Herein, we demonstrate that thermal quenching can be considerably suppressed via the negative thermal expansion effect in Zr(WO₄)₂ that serves as host for Eu³⁺ red emission. The photoluminescence (PL) intensity is surprisingly enhanced by 130% when the temperature is raised from room temperature to 100 °C. As temperature further increases to 160 °C, the PL intensity turns to reduce, which is still 1.4 times of that at room-temperature. Moreover, Zr(WO₄)₂:15%Eu phosphor has good durability, which still exhibits strong red luminescence (only 13% loss) after being kept in 85 °C/85% relative humidity chamber for 240 h. The anti-thermal quenching of Eu³⁺ luminescence can be ascribed mainly to the following two factors: first one is the thermal-enhanced energy transfer between Eu³⁺ ions induced by the contraction of Zr(WO₄)₂ unit-cell volume that leads to the strong structural rigidity of host lattice; second one would be electron traps in the host that favors the increase of electrons on the excited energy levels. This important anti-thermal quenching effect induced from the negative thermal expansion of the host matrix may stimulates a novel and efficient approach to design highly thermal stable phosphors for next-generation LEDs.     

Effect of A+ (A = Li,Na and K) co-doping on enhancing the luminescence of Ca5(PO4)2SiO4:Eu3+ red-emitting phosphors as charge compensator

A series of Ca_5-x(PO₄)₂SiO₄:xEu³⁺ red-emitting phosphors were synthesized through solid-state reaction, and alkali metal ions A⁺ (A = Li, Na and K) were co-doped in Ca₅(PO₄)₂SiO₄:Eu³⁺ to improve its luminescence property. The impacts of synthesis temperature, luminescence center Eu³⁺ concentration and charge compensator A⁺ on the structure and luminescence property of samples were studied in detail. X-ray diffraction results indicated that prepared Ca₅(PO₄)₂SiO₄:Eu³⁺, A⁺ had a standard Ca₅(PO₄)₂SiO₄ structure with space group P6₃/m. Under the excitation of 392 nm, Ca₅(PO₄)₂SiO₄:Eu³⁺ phosphors showed a red emission consisting of several emission peaks at 593 nm, 616 nm and 656 nm, relevant to ⁵D₀→⁷F₁, ⁵D₀→⁷F₂ and ⁵D₀→⁷F₄ electron transitions of Eu³⁺ ions, respectively. Luminescence intensity and lifetime of Ca₅(PO₄)₂SiO₄:Eu³⁺ can be significantly enhanced through co-doping alkali metal ion A⁺, which play an important role as charge compensator. The results suggest that Ca₅(PO₄)₂SiO₄:Eu³⁺, A⁺ red phosphors with excellent luminescence property are expectantly served as red component for white light-emitting diodes excited by near-ultraviolet.     

Synthesis,crystal structure,and anti-thermal quenching performance of Lu2Sr(1−x)Al4SiO12:xEu2+ phosphors

With high-temperature solid-state reaction method, a series of Lu₂Sr_(1−x)Al₄SiO₁₂:xEu²⁺ phosphors have been synthesized. With Rietveld refinement method, the crystal structure of Lu₂SrAl₄SiO₁₂ has been refined. Under the excitation of the ultraviolet and violet band light, Lu₂Sr_(1−x)Al₄SiO₁₂:xEu²⁺ emits the Eu²⁺ characteristic blue broadband light. The photoluminescence properties of concentration quenching, emission peak shift, reflectance spectra, and luminescence decay have been investigated. With the structure analyses, the corresponding physical mechanisms have been discussed. With the increased temperature, this phosphor shows well thermal stabilities. For the x_Eu = 0.06, 0.08, and 0.1 phosphors, the strong anti-thermal quenching performance has been observed. The reason for the anti-thermal quenching of this phosphor has been discussed. The trap capture mechanism may be the suitable physical mechanism to explain the anti-thermal quenching of this phosphor. This phosphor shows the potential applications in the white LED lighting fields.     

Structure and Luminescence of New Red‐Emitting Materials‐Eu3+‐Doped Triple Orthovanadates NaALa(VO4)2 (A = Ca,Sr, Ba)

The new red‐emitting phosphors of Eu³⁺‐doped triple orthovanadates NaALa(VO₄)₂ (A = Ca, Sr, Ba) were prepared by the high‐temperature solid‐state reaction. The formation of single phase compound with isostructural structure of Ba₃(VO₄)₂ was verified through X‐ray diffraction (XRD) studies. The photoluminescence excitation and emission spectra, the fluorescence decay curves and the dependence of luminescence intensity on doping level were investigated. The phosphor can be efficiently excited by near UV and blue light to realize an intense red luminescence (613 nm) corresponding to the electric dipole transition ⁵D₀→⁷F₂ of Eu³⁺ ions. Their potential applications as red‐emitting phosphors for solid‐state lighting were evaluated in comparison with the Eu³⁺‐doped lanthanum orthovanadate LaVO₄ and other reported references. The luminescence was discussed in detail on the base of the crystal structures. The luminescence thermal stability on temperature was investigated and the thermal activated energy was calculated. The phosphors can be suggested to be a potential red‐emitting phosphor for the application on white LEDs under irradiation of near‐UV or blue chips.