共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
3.
4.
5.
广义模块化设计原理及方法 总被引:27,自引:0,他引:27
针对传统模块化设计的局限性,将参数化设计和变量化分析技术引入模块化设计,提出广义模块化设计方法,从而拓展模块化设计的应用领域,使其既可适用于系列分级特性比较明显的产品及其产品族的开发,又可满足工况复杂、大载荷,需要进行结构强度、刚度设计,系列分级特性不明显的机械产品的开发设计.对广义模块化设计原理、广义产品平台、基于广义模块组合和基于广义产品平台的产品族规划方法进行系统阐述.最后以液压机广义模块化设计和产品族规划为例,详细说明广义模块化设计的基本原理和方法. 相似文献
6.
基于广义模块化设计的产品重构技术研究 总被引:2,自引:0,他引:2
从广义模块化设计及其相关概念出发,讨论了广义模块化设计的适用范围,并从可重构产品族的规划、模型创建、模块扩展及其组合拼装等方面详细介绍了基于广义模块化设计的产品重构技术,并以组合框架式液压机产品族设计为例,详细说明了广义模块化的产品重构原理和方法. 相似文献
7.
8.
9.
10.
针对主动式、磁控型和磁流变型气囊抛光工具的不同结构特点和使用功能的有效集成问题,基于模块化理论,将产品需求多变性和主体结构标准化有效结合起来,充分利用共用性和组合优化效应,完成了模块化气囊抛光工具的设计,并为产品族规划打下了基础;开展了模块化基础理论、功能模块划分、结构细化设计和产品族规划等方面的分析与研究,通过柔性工作模块、磁场发生器模块、气控容腔模块、动力模块、连接板模块和传感测控模块等,充分保证了新型气囊抛光技术自动、柔性、可控、多变的特点;在以模块化气囊抛光工具为核心的机器人辅助模具自由曲面抛光平台上,进行了相关的试验研究。研究结果表明:将模块化气囊抛光工具应用于模具钢抛光,能获得Ra0.006μm的高质量表面。 相似文献
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献
18.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
19.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献