Reactive electrospinning of poly(vinyl alcohol) nanofibers

We aim to couple the electrospinning in‐line with solution chemistry to fabricate novel crosslinked polymer nanofibers. Poly(vinyl alcohol) (PVA) was used as a model polymer due to its high amount of hydroxyl groups. To obtain ideal parameters for electrospinning, pure PVA was explored primarily. To gain crosslinked fibers, PVA was first crosslinked partially with glutaraldehyde (GA) followed by transferring this precursor to a long hot tube which was used as reactor and then electrospun right before gelation. The preheating time and tube‐passing time were determined with viscometer and rheometer. The reactive as‐spun fibers could maintain their original morphology after water immersion due to their high crosslinking degree. The thermal stability and mechanical property of reactive as‐spun fibers were improved drastically compared with pure and GA vapor crosslinked PVA fibers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Hydrophilic non-wovens made of cross-linked fully-hydrolyzed poly(vinyl alcohol) electrospun nanofibers

Fully-hydrolyzed poly (vinyl alcohol) (PVA) nanofibers were successfully electrospun from aqueous solutions of PVA in the presence of acetic acid. A continuous spinning of uniform PVA nanofibers proceeded by the addition of acetic acid due to the changes of electronic conductivity and surface tension of aqueous solution of PVA. When cross-linking agent 1 was added to aqueous solution of PVA and subsequent thermal treatment of as-spun nanofibers, chemically cross-linked PVA nanofibers were achieved to resist disintegration in contact with hot water and the tensile mechanical property of nanofiber non-wovens was greatly improved by the formation of cross-linking points. Magnetite was deposited uniformly onto the hydrophilic surface of cross-linked PVA nanofibers and the resulted nanofibers decorated with magnetite showed a magnetic responsiveness. The deposition of magnetite on the PVA nanofibers can generate self-standing magnetic non-wovens.     

One-step fabrication of branched poly(vinyl alcohol) nanofibers by magnetic coaxial electrospinning

Branching has been emerging in 3-D interconnecting building blocks. Branched and hyperbranched poly(vinyl alcohol) (PVA) nanofibers were fabricated by coaxially electrospinning two-liquids under an alternating magnetic field in a facile manner. Both the PVA nanofiber trunks with diameter of 100–200 nm and the PVA nanofiber branches with diameter of 10–30 nm were formed in a single step. The length and the morphology of the branched PVA nanofibers could be controlled through a rational design of the magnetic field. The facile technique may readily be extended to prepare 3-D branched nanofibers from other materials such as various polymers and polymer–ceramic materials. Moreover, the multifunctional and multicomponent materials with branched nanostructure could be expected by using the magnetic coaxial electrospinning technique. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermal and structural characterization of nanofibers of poly(vinyl alcohol) produced by electrospinning

Poly(vinyl alcohol) (PVOH) was obtained from the alkaline hydrolysis of poly(vinyl acetate) (PVAc). Nonwoven membranes (mats) of PVOH nanofibers were produced by electrospinning of solutions of PVOH in water with and without aluminum chloride. The concentration of the PVOH/water solution was 12.4% w/v. The morphology of the mats was analyzed by scanning electron microscopy (SEM). The thermal properties and the degree of crystallinity of the nanofibers were measured by differential scanning calorimetry (DSC); the crystal structure of the mats was evaluated by wide‐angle X‐ray diffraction. The best nanofibers were obtained by electrospinning the PVOH/water solution with aluminum chloride (45% w/v) in which an electrical field of 3.0 kV/cm was applied. It was observed that the addition of the aluminum chloride and the increase in the applied electrical field decreased the number‐average nanofibers diameters. The mats without aluminum chloride had higher melting temperatures and higher degrees of crystallinity than the mats with the salt. The crystal structure of the mats was found to be monoclinic; however, the mats were neither highly oriented nor have a high degree of crystallinity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of graphene oxide/poly(vinyl alcohol) composite nanofibers via electrospinning

Graphene oxide (GO) was well dispersed in poly(vinyl alcohol) (PVA) diluted aqueous solution, and then the mixture was electrospun into GO/PVA composite nanofibers. Electron microscopy and Raman spectroscopy on the as‐prepared and calcined samples confirm the uniform distribution of GO sheets in the nanofibers. The thermal and mechanical properties of the nanofibers vary considerably with different GO filler contents. The decomposition temperatures of the GO/PVA composite nanofiber dropped by 38–50°C compared with pure PVA. A very small loading of 0.02 wt % GO increases the tensile strength of the nanofibers by 42 times. A porous 3D structure was realized by postcalcining nanofibers in H₂. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of antimicrobial electrospun poly(vinyl alcohol) nanofibers containing benzyl triethylammonium chloride

The aim of this study was to characterize antimicrobial electrospun poly(vinyl alcohol) (PVA) nanofibers containing benzyl triethylammonium chloride (BTEAC) as an antimicrobial agent. The antimicrobial BTEAC-PVA nanofibers were prepared through electrospinning at the optimal conditions of 15 kV voltage and a 1.0 mL h^− 1 flow rate. Based on the minimum inhibitory concentration (MIC) test results against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and Klebsiella pneumonia, BTEAC-PVA nanofibers containing 2.6% BTEAC were fabricated to test the antibacterial and antiviral activities. The average diameter of the BTEAC-PVA nanofibers increased from 175.7 to 464.7 nm with increasing BTEAC concentration from 0 to 2.6%. The antimicrobial activities of the BTEAC-PVA nanofibers were tested against bacteria. The antibacterial tests with 2.6% BTEAC-PVA nanofibers demonstrated that bacterial reduction in PVA nanofibers was similar to the control value, indicating that PVA had a minimal effect on bacteria death. For the BTEAC-PVA nanofibers, the bacterial reduction ratio increased with increasing contact time, demonstrating that BTEAC-PVA nanofibers successfully inhibited the growth of bacteria. In addition, the antiviral tests against viruses (bacteriophages MS2 and PhiX174) showed that the BTEAC-PVA nanofibers inactivated both MS2 and PhiX174.     

Preparation and surface-enhanced Raman performance of electrospun poly(vinyl alcohol)/ high-concentration-gold nanofibers

A facile approach to prepare electrospun poly(vinly alcohol) (PVA) nanofibers with high concentration of gold nanoparticles (Au NPs) on the fibers, had been developed. These PVA/Au nanofibers could be used as flexible surface-enhanced Raman scattering (SERS) substrates. Relatively high concentration of PVA aqueous solution (10 wt %) was used as the stabilizing agent for gold salt precursor, as well as the starting solution for electrospinning. This method was demonstrated to be effective to prepare high-concentration-gold nanoparticles without aggregation and precipitation by reducing high concentration of gold salt in the presence of PVA aqueous solution. SEM and TEM images showed that both the amount and the size of Au NPs which embedded in PVA nanofibers, increased with increasing the gold salt content, while the gap between the adjacent NPs decreased. Raman spectra showed an apparent enhancement in the signal of 4-mercaptobenzoic acid (4-MBA) molecules pre-absorbed from its ethanol solution onto the PVA/Au nanofibers. The high SERS activity to 4-MBA in solution with a relatively low concentration (10⁻⁶ M), could be mainly attributed to the reduced gap of Au NPs.     

Preparation and surface-enhanced Raman performance of electrospun poly(vinyl alcohol)/ high-concentration-gold nanofibers

Isomeric (4, 4??-methylenediphenoxyl) bis (phthalic anhydride)s (BPFDAs)were synthesized and their structures were determined via IR spectra and ¹H NMR. Polyimides were then prepared from isomeric BPFDAs and aromatic diamines in N, N-Dimethylacetamide (DMAc) via the conventional two-step method. Polyimides based on 3, 3??-BPFDA are soluble in common organic solvents at room temperature, while polyimides based on 4, 4??-BPFDA were only partially soluble in high-boiling-point solvent even upon heating. The 5% weight-loss temperatures (T _5% ) of these polyimides were in the range of 430?C500?°C in air. Dynamic mechanical thermal analysis (DMTA) indicated that the glass-transition temperatures of polyimides from 3, 3??-BPFDA are around 10?C20?°C higher than those of polyimides from 4, 4??-BPFDA. The wide-angle X-ray diffraction showed that all polyimides are amorphous.     

Antibacterial electrospun chitosan/poly(vinyl alcohol) nanofibers containing silver nitrate and titanium dioxide

Chitosan/poly(vinyl alcohol) (PVA) nanofibers with antibacterial activity were prepared by the electrospinning of a chitosan/PVA solution with a small amount of silver nitrate (AgNO₃) and titanium dioxide (TiO₂). Nanofibers with diameters of 270–360 nm were obtained. The yield of low‐viscosity chitosan (LCS)/PVA nanofibers was higher than that of high‐viscosity chitosan (HCS)/PVA, and the water content of the HCS/PVA nanofibers and the LCS/PVA nanofibers were 430 and 390%, respectively. The nanofibers developed in this study exhibited antibacterial activities of 99 and 98% against Staphylococcus aureus and Escherichia coli, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of atactic poly(vinyl alcohol)/silver composite nanofibers by electrospinning and their characterization

Poly(vinyl alcohol) (PVA)/silver composite nanofibers were successfully prepared by the electrospinning method. Water‐based colloidal silver in a PVA solution was directly mixed without any chemical or structural modifications into PVA polymer fibers to form organic–inorganic composite nanofibers. The ratio of silver colloidal solution to PVA played an important role in the formation of the PVA/silver composite nanofibers. We prepared two different atactic PVA/silver nanocomposites with number‐average degrees of polymerization of 1700 and 4000 through electrospinning with various processing parameters, such as initial polymer concentration, amount of silver colloidal solution, applied voltage, and tip‐to‐collector distance. The PVA/silver composite nanofibers were characterized by field emission scanning electron microscopy and transmission electron microscopy (TEM). TEM images showed that silver nanoparticles with an average diameter of 30–50 nm were obtained and were well distributed in the PVA nanofibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of monodispersed silica spheres and electrospinning of poly(vinyl alcohol)/silica composite nanofibers

In this study, monodispersed silica spheres were successfully synthesized by seed‐growth method and they can be highly dispersed in the poly(vinyl alcohol)(PVA) solution. PVA/silica composite fibers were fabricated by electrospinning the composite solutions containing different amount of silica. Further investigation showed that the size distribution of silica sphere was monodispersed and the spheres were homogeneously dispersed in the fibers individually. The composite fibers showed an uniform and continuous morphology with a average diameter of 298–345 nm. The as‐spun nanofibers were characterized by Field Emission Scanning Electron Microscope (FE‐SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and thermal gravimetric analysis (TGA). POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Fabrication and characterization of electrospun bionanocomposites of poly (vinyl alcohol)/nanohydroxyapatite/cellulose nanofibers

The aim of the present study was preparation, optimization, and systematic characterization of electrospun bionanocomposite fibers based on polyvinyl alcohol (PVA) as matrix and nanohydroxy apatite (nHAp) and cellulose nanofibers (CNF) as nanoreinforcements. The presence of nHAp and nHAp-CNF affected the morphology of electrospun mats and reduced fiber diameter, particularly at a higher content of nanofillers. The obtained results of FTIR, DSC, and WAXS proved the crystallinity reduction of electrospun nancomposites. Both nHAp and nHAp-CNF addition led to a significant increase of Young modulus with the highest stiffness for nanocomposite fibers at 10 wt% of nHAp and 3 wt% of CNF.     

含氯化钠的聚乙烯醇静电纺丝研究

研究了不同聚合度聚乙烯醇与少量氯化钠盐混合物水溶液的静电纺丝,并与单纯聚乙烯醇水溶液的静电纺丝进行了对比。利用扫描电镜观察纤维的形态、直径变化。结果表明:聚乙烯醇水溶液中加入少量氯化钠,由于离子的作用可以使喷射流表面电荷密度增大,静电纺丝可得到比单纯聚乙烯醇更细的纳米纤维。     

Properties of electrospun poly(vinyl alcohol) hydrogel nanofibers crosslinked with 1,2,3,4‐butanetetracarboxylic acid

ABSTRACT: Electrospun nanofibrous hydrogel membranes have been gaining significant importance due to the combination of unique physical properties of nanofibers and biocompatibility of hydrogels. Thus, they are considered as potential candidates for medical textile applications. This study deals with electrospinning of poly(vinyl alcohol) (PVA) hydrogel nanofibrous membranes. The chemical crosslinking of PVA with proportionate quantities of 1,2,3,4 butanetetracarboxylic acid (BTCA) was undertaken to form hydrogel structures. Cross‐linked membranes were characterized by scanning electron microscopy, FT‐IR and thermogravimetric analysis, water swelling, and durability tests. FT‐IR analysis demonstrated the formation of ester linkages between PVA and BTCA and thermogravimetric analysis showed that crosslinking improved the thermal stability of the nanofibrous structure. Furthermore, the results indicated that crosslinking with BTCA improved water stability of PVA membranes and the nanofibrous structure was preserved after water treatment. It is envisaged that use of BTCA as a cross‐linker to form hydrogel nanofibers could be a practical and a promising method for medical textile applications, especially for wound dressings given its nontoxicity and immiscibility with polymer solutions. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Crystallinity,reversibility, and injectability of physically crosslinked poly(vinyl alcohol) and poly(ethylene glycol) hydrogels

Crystallite regions within a hydrogel network contribute to its mechanical strength, which is crucial for use in load-bearing applications. However, high amounts of crystallinity can negatively impact the ability for hydrogels to be injected, an attractive property that could replace the need for highly invasive surgical procedures. The reversibility of crystallinity and its lasting impact on the injectability of poly(vinyl alcohol) and poly(ethylene glycol) hydrogels was evaluated in this paper. The relative percent crystallinity in hydrogels was evaluated after storage and autoclaving in syringes in weekly intervals using X-ray diffraction. Results indicate that crystallinity increased over time and significantly decreased after autoclaving for all samples, where postautoclaved samples contained comparable crystallinity percentages to freshly made gels (p > 0.05). Injectability was evaluated using calculated viscosity. Aged samples were able to be injected after autoclaving, yet there was no determination established between viscosity and storage times based on the data. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48706.     

A study on UV-protection property of poly(vinyl alcohol)-montmorillonite composite nanofibers

The aim of this research is to investigate the possibility of barrier effect of poly(vinyl alcohol) (PVA)/montmorillonite (MMT) nanofiber, against the UV radiation in different electrospinning situations. For this purpose, nanofibers with different weight ratio of PVA and nanoclay (MMT) were electrospun under different circumstances, and the amount of protect that is created by the nanofiber web against UV radiation by examining the rate of degradation of methylene blue dye that was protected by the same web was estimated. The UV-vis spectrometry was used for the analysis of methylene blue color. In order to investigate the morphology and miscibility of PVA-MMT composite nanofiber, X-ray diffraction, scanning election microscope, and Fourier transform infrared spectrometer have been used. Thermal gravimetric analysis is used to investigate and explore how nanofibers behave against heat.     

Rotating-disk electrospinning: needleless electrospinning of poly(caprolactone), poly(lactic acid) and poly(vinyl alcohol) nanofiber mats with controlled morphology

As a contribution to the feasibility of high-throughput electrospinning, here we report on the investigation into the production of polymer nanofiber mats through needleless electrospinning. For this study, we used poly(caprolactone) (PCL), poly(lactic acid) (PLA) and poly(vinyl alcohol) (PVA), widely used polymers in the field of electrospinning. Optimization studies were carried out to devise the characteristics of the rotating-disk electrospinning system in order to assess the processing window for each polymer. Other factors were also considered, where the production rate, fiber size distribution, and morphology of the specimens acquired by rotating-disk electrospinning and conventional electrospinning techniques were compared. Our studies also illustrate the similarities of this novel “bottom-up” process compared to the conventional one, where a high resolution image confirmed the formation of a cone-jet structure and a Taylor Cone.     

Discharge behaviors and jet profiles during electrospinning of poly(vinyl alcohol)

Relations between beads formation and jet profiles, and beads formation and electric discharge during electrospinning were investigated by changing sample parameters and spinning conditions. The jet profiles were obtained as a function of the position along the spinning line by using photographs. As the molecular weight or concentration increased, the elongational viscosity of jet at the onset of bending instability was increased, and beads formation was suppressed. In addition, beads formation was enhanced with increasing voltage. The electric discharge spark from the apex of cone was observed by using image intensified high‐speed camera. It was found that the beads were also formed easily when the electric discharge generated. POLYM. ENG. SCI., 50:1788–1796, 2010. © 2010 Society of Plastics Engineers     

On the electrospinning of poly(vinyl alcohol) nanofiber mats: A revisit

Electrospinning was used to fabricate mats of poly(vinyl alcohol) (PVA; M_w = 72,000 Da, degree of hydrolysis ≈ 97.5–99.5) nanofibers from PVA solutions in reverse osmotic water. The effects of solution concentration, applied electrical potential, sonication, and collection distance on morphological appearance and diameters of the as‐spun fiber mats as well as those of the individual fibers were carefully investigated mainly by scanning electron microscopy. The effect of the distance from the center of the as‐spun fiber mat on morphological appearance and diameters of the as‐spun fibers was also investigated. The mechanical integrity of some as‐spun PVA fiber mats was also investigated. At all concentrations and applied electrical potentials investigated, the average diameters of the as‐spun PVA fibers ranged between 85 and 647 nm. The use of sonication to prepare a PVA solution caused the viscosity of the solution to decrease; hence, the observed decrease in the average diameters of the as‐spun fibers and the average diameters of the as‐spun fibers were practically the same throughout the as‐spun fiber mat. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008