Removal of Ni(II), Zn(II) and Cr(VI) from aqueous solution by Alternanthera philoxeroides biomass

Alternanthera philoxeroides biomass, a type of freshwater macrophyte, was used for the sorptive removal of Ni(II), Zn(II) and Cr(VI) from aqueous solutions. Variables of the batch experiments include solution pH, contact time, particle size and temperature. The biosorption capacities are significantly affected by solution pH. Higher pH favors higher Ni(II), Zn(II) removal, whereas higher uptake of Cr(VI) is observed as the pH is decreased. A two-stage kinetic behavior is observed in the biosorption of Ni(II), Zn(II) and Cr(VI): very rapid initial biosorption in a few minutes, followed by a long period of a slower uptake. It is noted that an increase in temperature results in a higher Ni(II), Zn(II) and Cr(VI) loading per unit weight of the sorbent. Decreasing the particle sizes of the Alternanthera philoxeroides biomass leads to an increase in the Ni(II), Zn(II) and Cr(VI) uptake per unit weight of the sorbent. All isothermal data are fairly well fitted with Langmuir equations. The thermodynamic parameter, DeltaG degrees, were calculated. The negative DeltaG degrees values of Cr(VI), Ni(II) and Zn(II) at various temperatures confirm the adsorption processes are spontaneous.     

Comparative study of the biosorption of Pb(II), Ni(II) and Cr(VI) ions onto S. cerevisiae: determination of biosorption heats

In this study, the biosorption of Pb(II), Ni(II) and Cr(VI) ions onto inactive Saccharomyces cerevisiae was investigated as a function of initial pH, initial metal ion concentration and temperature. The Langmuir model was applied to experimental equilibrium data of Pb(II), Ni(II) and Cr(VI) biosorption depending on temperature and the maximum metal ions uptake at optimum biosorption temperature of 25 °C, were found to be 270.3, 46.3 and 32.6 mg g⁻¹, respectively. Using the Langmuir constant, b values obtained at different temperatures, the biosorption heats of Pb(II), Ni(II) and Cr(VI) were determined as −1.125, −1.912 and −2.89 kcal mol⁻¹, respectively. The results indicated that the biosorption of Pb(II), Ni(II) and Cr(VI) ions to S. cerevisiae is by the physical adsorption and has an exothermic nature.     

Adsorption of Cr(VI) from aqueous solution by hydrous zirconium oxide

A type of ZrO₂·nH₂O was synthesized and its Cr(VI) removal potential was investigated in this study. The kinetic study, adsorption isotherm, pH effect, thermodynamic study and desorption were examined in batch experiments. The kinetic process was described by a pseudo-second-order rate model very well. The Cr(VI) adsorption tended to increase with a decrease of pH. The adsorption data fitted well to the Langmuir model. The adsorption capacity increased from 61 to 66 mg g^?1 when the temperature was increased from 298 to 338 K. The positive values of both ΔH° and ΔS° suggest an endothermic reaction and increase in randomness at the solid–liquid interface during the adsorption. ΔG° values obtained were negative indicating a spontaneous adsorption process. The effective desorption of Cr(VI) on ZrO₂·nH₂O could be achieved using distilled water at pH 12.     

Removal of Zn(II), Cu(II), Ni(II), Ag(I) and Cr(VI) present in aqueous solutions by aluminium electrocoagulation

The performance of an electrocoagulation system with aluminium electrodes for removing heavy metal ions (Zn2+, Cu2+, Ni2+, Ag+, Cr2O7(2-)) on laboratory scale was studied systematically. Several parameters - such as initial metal concentration, numbers of metals present, charge loading and current density - and their influence on the electrocoagulation process were investigated. Initial concentrations from 50 to 5000 mg L(-1) Zn, Cu, Ni and Ag did not influence the removal rates, whereas higher initial concentrations caused higher removal rates of Cr. Increasing the current density accelerated the electrocoagulation process but made it less efficient. Zn, Cu and Ni showed similar removal rates indicating a uniform electrochemical behavior. The study gave indications on the removal mechanisms of the investigated metals. Zn, Cu, Ni and Ag ions are hydrolyzed and co-precipitated as hydroxides. Cr(VI) was proposed to be reduced first to Cr(III) at the cathode before precipitating as hydroxide.     

Removal of Cr(VI) and As(V) from aqueous solutions by HDTMA-modified zeolite Y

The synthesized zeolite NaY from rice husk ash (RHA) and the commercial zeolite NaY both modified with surfactants in amounts equal to 50%, 100% and 200% of their external cation exchange capacity (ECEC) were used to remove chromate and arsenate anions from aqueous solutions. While the unmodified zeolite Y had little or no affinity for the Cr(VI) and As(V) anionic species, the surfactant-modified zeolite Y (SMZY) showed significant ability to remove of these anions from the aqueous solutions. The highest chromates and arsenates adsorption efficiency was observed from solutions of pH values 3 and 8, respectively because of the dominance of the univalent species of both anions. The adsorption equilibrium data were best fitted with the Langmuir isotherm model with the highest removal capacities observed for the SMZY initially prepared considering the hexadecyltrimethyl ammonium (HDTMA) amount equal to the 100% of the ECEC of zeolite Y. Synthesized SMZY remove Cr(VI) and As(V) more than the corresponding commercial one due to its lower silica to alumina ratio. Thus, the HDTMA-covered modified zeolite Y synthesized using RHA can be used to remove Cr(VI) and As(V) from water.     

Removal of Cr(VI) from aqueous solutions by low-cost biosorbents: marine macroalgae and agricultural by-products

In this study, adsorption of Cr(VI) onto the four low-cost biosorbents (Laminaria japonica, P. yezoensis Ueda, rice bran and wheat bran) was investigated depending on solution pH, contact time, adsorbent concentration and adsorption isotherms by employing batch adsorption technique. The adsorption capacities were significantly influenced by solution pH, with lower pH favoring higher Cr(VI) removal for various biosorbents. The ionic strength of NaCl was also observed to have a significant impact on the Cr(VI) adsorption due to the competition of Cl(-) in the aqueous solutions. The batch equilibrium data were correlated to Langmuir and Freundlich isotherms and the data fitted better to the Freundlich isotherm equation. The apparent thermodynamic parameters were calculated for each of the four biosorbents and the obtained numerical values showed that the Cr(VI) adsorption onto the various low-cost biosorbents is spontaneous, entropy-driven and endothermic processes. The batch kinetic data were correlated to the pseudo-first order and pseudo-second order models and the data fitted better to the pseudo-second order equation. An intraparticle diffusion model was applied to investigate the adsorption mechanisms. The adsorption capacities for various biosorbents studied in this work were inversely proportional to the adsorbent concentrations.     

Removal of chromium(VI) from aqueous solution by activated carbons: kinetic and equilibrium studies

The objective of this study is to assess the uptake of hexavalent chromium (Cr(VI)) from aqueous solutions onto activated carbons (AC) produced from wood. Two activated carbons are tested, a KOH-activated carbon and a commercial H3PO4-activated carbon (Acticarbone CXV). The adsorption of Cr(VI) is maximal at the lowest values of pH (pH 3) and increases with temperature for both adsorbents. The KOH-activated carbon shows higher capacity for adsorption of Cr(VI) than Acticarbone. The sorption isotherms fit the Langmuir model accurately. The adsorption reaction was found to obey a pseudo second-order rate. The activation energy and the pre-exponential factor as well as the thermodynamic functions related to adsorption reaction, DeltaS degrees , DeltaH degrees , DeltaG degrees , were determined. Nevertheless, the global reaction rate is probably controlled by the intra-particular diffusion of Cr(VI) and the mass diffusivity of Cr(VI) was evaluated.     

Magnetic chitosan nanoparticles for removal of Cr(VI) from aqueous solution

A simple method was introduced to prepare magnetic chitosan nanoparticles by co-precipitation via epichlorohydrin cross-linking reaction. The average size of magnetic chitosan nanoparticles is estimated at ca. 30 nm. It was found that the adsorption of Cr(VI) was highly pH-dependent and its kinetics follows the pseudo-second-order model. Maximum adsorption capacity (at pH 3, room temperature) was calculated as 55.80 mg·g^? 1, according to Langmuir isotherm model. The nanoparticles were thoroughly characterized before and after Cr(VI) adsorption. From this result, it can be suggested that magnetic chitosan nanoparticles could serve as a promising adsorbent for Cr(VI) in wastewater treatment technology.     

Removal of copper(II) from aqueous solution by Jordanian pottery materials

The aim of this work was to assess the possibility of removing some heavy metals from water by a low-cost adsorbent, like Jordanian raw pottery. Five types of raw and modified pottery materials have been investigated. The effects of initial metal concentration, agitation time, pH and temperature on the removal of Cu(II) were studied. A pseudo-first order was used to test the adsorption kinetics. In order to investigate the sorption isotherm, two equilibrium models, the Freundlich and Langmuir isotherms, were analyzed. The effect of solution pH on the adsorption onto pottery was studied in the pH range 1-5. The adsorption was exothermic at ambient temperature and the computation of the parameters, DeltaH, DeltaS and DeltaG, indicated the interactions to be thermodynamically favorable.     

Removal of Cr(VI) from aqueous solutions using agricultural waste 'maize bran'

Novel biosorbent 'maize bran' has been successfully utilized for the removal of Cr(VI) from aqueous solution. The effect of different parameters such as contact time, sorbate concentration, pH of the medium and temperature were investigated and maximum uptake of Cr(VI) was 312.52 (mgg(-1)) at pH 2.0, initial Cr(VI) concentration of 200mgL(-1) and temperature of 40 degrees C. Effect of pH showed that maize bran was not only removing Cr(VI) from aqueous solution but also reducing toxic Cr(VI) into less toxic Cr(III). The sorption kinetics was tested with first order reversible, pseudo-first order and pseudo-second order reaction and it was found that Cr(VI) uptake process followed the pseudo-second order rate expression. Mass transfer of Cr(VI) from bulk to the solid phase (maize bran) was studied at different temperatures. Different thermodynamic parameters, viz., DeltaG degrees , DeltaH degrees and DeltaS degrees have also been evaluated and it has been found that the sorption was feasible, spontaneous and endothermic in nature. The Langmuir and Freundlich equations for describing sorption equilibrium were applied and it was found that the process was well described by Langmuir isotherm. Desorption studies was also carried out and found that complete desorption of Cr(VI) took place at pH of 9.5.     

Removal of Cr(VI) from aqueous solutions using modified red pine sawdust

The adsorption of Cr(VI) from aqueous solutions on sawdust (SD), base extracted sawdust (BESD) and tartaric acid modified sawdust (TASD) of Turkish red pine tree (Pinus nigra), a timber industry waste, was studied at varying Cr(VI) concentrations, adsorbent dose, modifier concentration and pH. Batch adsorption studies have been carried out. Sawdust was collected from waste timber industry and modified with various amount of tartaric acid (TA) (0.1-1.5M). The batch sorption kinetics has been tested and the applicability of the Langmuir and Freundlich adsorption isotherms for the present system has been tested at 25+/-2 degrees C. Under observed test conditions, the equilibrium adsorption data fits the linear Freundlich isotherms. An initial pH of 3.0 was most favorable for Cr(VI) removal by all adsorbents. Maximum Cr(VI) was sequestered from the solution within 120 min after the beginning for every experiment. The experimental result inferred that chelation and ion exchange is one of the major adsorption mechanisms for binding metal ions to the SD. Percentage removal of Cr(VI) was maximum at the initial pH of 3.0 (87.7, 70.6 and 55.2% by TASD, BESD, and SD, respectively). Adsorption capacities range from 8.3 to 22.6 mg/g for SD samples.     

Efficient removal of Cr(VI) from aqueous solution by natural pyrite/rhodochrosite derived materials: Performance,kinetic and mechanism

In this work, pyrite/rhodochrosite (Py_xRh_y) composite synthesized from natural pyrite and rhodochrosite to remediate Cr(VI) containing wastewater was systematically investigated and evaluated. Results show that pyrite/rhodochrosite (1:1) showed the best Cr(VI) removal performance. XRD showed that emergence of MnS and pyrrhotite contributed to a significant increasing Cr(VI) reduction rate. The estimated maximum adsorption capacity was 95.58 mg/g at pH value of 6, temperature of 303.15 k, which was larger than other iron and manganese-based materials. Additionally, thermodynamic study illuminated that Cr(VI) removal by Py₁Rh₁ was a spontaneous and endothermic process. Taffel curve and EIS result presented higher corrosion current and lower electrical resistance for Py₁Rh₁, respectively, which was more favorable for the electron transfer. The surface cyclic regeneration of Fe(II) and Mn(II) provided long-term electron transfer to the Cr(VI) reduction. Our results demonstrated the great potentials of natural pyrite and rhodochrosite synthetic materials in the remediation of Cr(VI) polluted water.     

Removal of Cu(II) from aqueous solution by adsorption onto acid-activated palygorskite

A series of activated palygorskite clay by HCl with different concentrations was prepared and applied as adsorbents for removal of Cu(II) from aqueous solutions. The effects of contact time, adsorbent dosages and pHs of suspension on the adsorption capacities for Cu(II) were investigated. The results showed that adsorption capacity of activated palygorskites increased with increasing the HCl concentration and the maximum adsorption capacity with 32.24 mg/g for Cu(II) is obtained at 12 mol/L of HCl concentration. The variations in IR spectra and pH of solution after adsorption Cu(II) confirmed that the numerous amount of silanol groups (Si-OH) originated by acid treatment were mainly responsible for Cu(II) adsorption onto acid-activated palygorskite. Kinetic studies indicated that the adsorption mechanisms in the Cu(II)/acid-activated palygorskite system followed the pseudo-second-order kinetic model with a relatively small contribution of film diffusion. Equilibrium data fitted well with Freundlich isotherm model compared to Langmuir isotherm model, indicating that adsorption takes place on heterogeneous surfaces of the acid-activated palygorskite. Adsorption-desorption studies presented that activated palygorskite has lower adsorption and desorption efficiencies using Cu(CH3COO)2 than that of other inorganic copper salts, such as CuSO4, Cu(NO3)2, and CuCl2.     

Enhancing the electrochemical Cr(VI) reduction in aqueous solution

In this study we present the cathodic Cr(VI) reduction using electrodissolution of iron anode. In batch experiments we tested four different cathodic materials; the best conditions were found when copper was used. It is observed that when more current is applied into the electrochemical cell faster reduction rates are achieved. Continuous experiments also reveal that Cr(VI) reduction could be done in a very efficient way. To confirm the experimental data, cyclic voltammetry was used and it was found that the cathodic Cr(VI) reduction is taking place.     

Removal of Pb(II) from aqueous solution by oxidized multiwalled carbon nanotubes

Oxidized multiwalled carbon nanotubes (MWCNTs) were employed as sorbent to study the sorption characteristic of Pb(II) from aqueous solution as a function of contact time, pH, ionic strength, foreign ions, and oxidized MWCNTs' contents under ambient conditions using batch technique. The results indicate that sorption of Pb(II) on oxidized MWCNTs is strongly dependent on pH values, and independent of ionic strength and the type of foreign ions. The removal of Pb(II) to oxidized MWCNTs is rather quickly and the kinetic sorption can be described by a pseudo-second-order model very well. Sorption of Pb(II) is mainly dominated by surface complexation rather than ion exchange. The efficient removal of Pb(II) from aqueous solution is limited at pH 7-10. X-ray photoelectron spectroscopy (XPS) is performed to study the sorption mechanism at a molecular level and thereby to identify the species of the sorption processes. The 3-D relationship of pH, Ceq and q indicates that all the data of Ceq-q lie in a straight line with slope -V/m and intercept C0V/m for the same initial concentration of Pb(II) and same content of oxidized MWCNTs of each experimental data.     

Effective removal and fixation of Cr(VI) from aqueous solution with Friedel's salt

Friedel's salt (3CaO·Al₂O₃·CaCl₂·10H₂O or Ca₄Al₂(OH)₁₂Cl₂(H₂O)₄) is a calcium aluminate hydrate formed by hydrating cement or concrete in seawater at a low cost. In the current study, we carefully examined the adsorption behaviors of Friedel's salt for Cr(VI) from aqueous solution at different concentrations and various initial pHs. The adsorption kinetic data are well fitted with the pseudo-first-order Lageren equation at the initial Cr(VI) concentration from 0.10 to 8.00 mM. Both the experimental and modeled data indicate that Friedel's salt can adsorb a large amount of Cr(VI) (up to 1.4 mmol Cr(VI)/g) very quickly (t_1/2 = 2–3 min) with a very high efficiency (>99% Cr(VI) removal at [Cr] < 4.00 mM with 4.00 g/L of adsorbent) in the pH range of 4–10. In particular, the competitive adsorption tests show that the Cr(VI) removal efficiency is only slightly affected by the co-existence of Cl⁻ and HCO₃⁻. The Cr(VI)-fixation stability tests show that only less than 0.2% adsorbed Cr(VI) is leaching out in water at pH 4–10 for 24 h because the adsorption/exchange of Cr(VI) with Friedel's salt leads to the formation of a new stable phase (3CaO·Al₂O₃·CaCrO₄·10H₂O). This research thus suggests that Friedel's salt is a potential cost-effective adsorbent for Cr(VI) removal in wastewater treatment.     

Removal of chromium (VI) from aqueous solution using treated oil palm fibre

This study proposed an oil palm by-product as a low-cost adsorbent for the removal of hexavalent chromium [Cr (VI)] from aqueous solution. Adsorption of Cr (VI) by sulphuric acid and heat-treated oil palm fibre was conducted using batch tests. The influence of pH, contact time, initial chromium concentration and adsorbent dosage on the removal of Cr (VI) from the solutions was investigated. The optimum initial pH for maximum uptake of Cr (VI) from aqueous solution was found to be 1.5. The removal efficiency was found to correlate with the initial Cr (VI) concentration, adsorbent dosage as well as the contact time between Cr (VI) and the adsorbent. The adsorption kinetics tested with pseudo first order and pseudo second order models yielded high R(2) values from 0.9254 to 0.9870 and from 0.9936 to 0.9998, respectively. The analysis of variance (ANOVA) showed significant difference between the R(2) values of the two models at 99% confidence level. The Freundlich isotherm (R(2)=0.8778) described Cr (VI) adsorption slightly better than the Langmuir isotherm (R(2)=0.8715). Difficulty in desorption of Cr (VI) suggests the suitability of treated oil palm fibre as a single-use adsorbent for Cr (VI) removal from aqueous solution.     

Grape waste as a biosorbent for removing Cr(VI) from aqueous solution

Grape waste generated in wine production is a cellulosic material rich in polyphenolic compounds which exhibits a high affinity for heavy metal ions. An adsorption gel was prepared from grape waste by cross-linking with concentrated sulfuric acid. It was characterized and utilized for the removal of Cr(VI) from synthetic aqueous solution. Adsorption tests were conducted in batch mode to study the effects of pH, contact time and adsorption isotherm of Cr(VI), which followed the Langmuir type adsorption and exhibited a maximum loading capacity of 1.91 mol/kg at pH 4. The adsorption of different metal ions like Cr(VI), Cr(III), Fe(III), Zn(II), Cd(II) and Pb(II) from aqueous solution at different pH values 1-5 has also been investigated. The cross-linked grape waste gel was found to selectively adsorb Cr(VI) over other metal ions tested. The results suggest that cross-linked grape waste gel has high possibility to be used as effective adsorbent for Cr(VI) removal.     

A mechanism study of light-induced Cr(VI) reduction in an acidic solution

The mechanisms of photo-catalytic reduction of Cr(VI) were investigated in acidic solutions with and without Fe(III). In a system without Fe(III), no Cr(VI) reduction was observed in dark conditions; conversely, under light conditions, the reduction reaction rate increased to 0.011 and 0.020microM min(-1) at pH 2 and pH 1, respectively, indicating the occurrence of Cr(VI) photo-reduction. The Cr(VI) photo-reduction reaction was induced by the photolysis of water molecules, leading to O(2) production. Upon the addition of Fe(III), the photo-reduction rate of Cr(VI) was significantly enhanced due to the formation of Fe(II), which is the photolytic product of FeCl(2)(+) and the electron donor for Cr(VI) reduction. However, with the same concentration of FeCl complexes, a strong inhibition of Cr(VI) reduction at pH 2 was observed, compared with pH 1. A possible explanation is that FeOH(2+) becomes predominant with increasing pH and that its photolytic product, the OH free radical, is an oxidant for Fe(II) and Cr(III) and can compromise Cr(VI) reduction. The kinetic result of each photo-reduction reaction pathway shows zero-order kinetics, suggesting that the photolysis reaction of H(2)O or FeCl(2+) is the rate-determining step in each pathway. The results also show the potential of developing a homogeneous photo-catalytic method to treat Cr(VI)-containing water.