复合沟道氟离子增强型AlGaN/GaN HEMT的研究

提出一种复合沟道氟离子(F-)增强型AlGaN/GaN HEMT(Hybrid-channel enhancement-mode AlGaN/GaN HEMT,HCE-HEMT)新结构。该结构引入高、低浓度F-复合沟道,其中高浓度F-注入区位于沟道靠近源漏两端以调制阈值电压,获得增强型器件;低浓度F-区位于沟道中部以调制肖特基栅电极的正向开启电压,增加器件承受的栅电压摆幅,但它对其下方二维电子气的耗尽作用很弱。同时,高浓度区只占栅长的40%,减轻高浓度F-对沟道的影响,提升器件的电流能力。利用Sentaurus软件仿真,结果显示,与传统F-增强型AlGaN/GaN HEMT相比,HCE-HEMT载流能力提高了40.3%,比导通电阻下降了23.3%,同时反向耐压仅下降了5.3%。     

增强型AlGaN/GaN HEMT器件工艺的研究进展

随着高压开关和高速射频电路的发展,增强型GaN基高电子迁移率晶体管(HEMT)成为该领域内的研究热点。增强型GaN基HEMT只有在加正栅压才有工作电流,可以大大拓展该器件在低功耗数字电路中的应用。近年来,国内外对增强型GaN基HEMT阈值电压的研究主要集中以下两个方面:在材料生长方面,通过生长薄势垒、降低Al组分、生长无极化电荷的AlGaN/GaN异质材料、生长InGaN或p-GaN盖帽层,来控制二维电子气浓度;在器件工艺方面,采用高功函数金属、MIS结构、刻蚀凹栅、F基等离子体处理,来控制表面电势,影响二维电子气浓度。从影响器件阈值电压的相关因素出发,探讨了实现和优化增强型GaN基HEMT的各种工艺方法和发展方向。     

AlGaN/GaN材料HEMT器件优化分析与I-V特性

在考虑AlGaN/GaN异质结中的压电极化和自发极化效应的基础上,自洽求解了垂直于沟道方向的薛定谔方程和泊松方程.通过模拟计算,研究了AlGaN/GaN HEMT器件掺杂层Al的组分、厚度、施主掺杂浓度以及栅偏压对二维电子气特性的影响.用准二维物理模型计算了AlGaN/GaN HEMT器件的输出特性,给出了相应的饱和电压和阈值电压,并对计算结果和AlGaN/GaN HEMT器件的结构优化进行了分析.     

场板结构对AlGaN/GaN HEMT温度场的影响北大核心CSCD

用Silvaco的ATLAS软件仿真研究了场板结构对AlGaN/GaN高电子迁移率晶体管(HEMT)的温度场分布的影响,分析了场板结构影响器件温度场分布的可能因素。模拟结果表明,加入场板结构后,器件沟道二维电子气浓度减小,电场分布发生变化,器件栅极漏侧边缘处的沟道峰值温度降低。加入栅场板和源场板结构后,场板边缘处都有一个新的温度峰值出现,器件的沟道温度峰值在加入单层和双层栅场板及源场板后由511K分别下降到487、468和484K,这种降低作用会随着栅场板层数的增加而有所增强。仿真结果说明场板结构通过改变AlGaN/GaN HEMT器件沟道载流子浓度和电场分布,影响器件内部的温度场分布。优化器件的场板结构是提高AlGaN/GaN HEMT的可靠性有效途径之一。     

Ka波段AlGaN/GaN HEMT栅结构仿真研究

为了研究适合Ka波段AlGaN/GaN HEMT的栅结构尺寸,借助二维器件仿真软件Silvaco Atlas,在完善仿真模型的基础上研究了Γ型栅各部分对AlGaN/GaN HEMT特性的影响,包括栅长与短沟道效应的关系、栅与沟道距离对短沟道效应和饱和漏电流的影响,以及栅金属厚度对fmax,栅场板对fT、fmax和内部电场的影响。根据典型器件结构和材料参数的仿真表明,为了提高频率并减轻短沟道效应,栅长应取0.15～0.25μm;减小栅与沟道的距离可略微改善短沟道效应,但会明显降低器件的饱和漏电流,综合考虑栅调制能力、饱和漏电流、短沟道效应三个方面,栅与沟道距离应取10～20nm;为了提高fmax,栅金属厚度应大于0.4μm;缩小栅场板长度可有效提高器件的频率,兼顾Ka波段应用和提高击穿电压,栅场板长度应在0.3～0.4μm左右。仿真得出的器件性能随结构参数的变化趋势以及尺寸数据对于Ka波段AlGaN/GaN HEMT的研究具有参考意义。     

GaN基HEMT器件特性建模及表征方法研究

目前,GaN基HEMT器件以其优越的性能而受到广泛的关注.在器件结构的设计中,器件的尺寸、材料的物理参数都严重影响GaN基HEMT器件的优越性能.基于器件仿真软件ISE-TCAD,本文研究了器件各部分的尺寸、各种材料的物理参数对器件沟道中二维电子气(2DEG)密度、器件直流特性等参数的影响.结果表明器件沟道中的二维电子...     

Ka波段GaN HEMT栅结构仿真研究

为了研究适合Ka波段GaN HEMT的栅结构尺寸,借助二维器件仿真软件Silvaco Atlas,在完善仿真模型的基础上研究了T型栅各部分对GaN HEMT特性的影响,包括栅长与短沟道效应的关系、栅与沟道距离对短沟道效应和饱和漏电流的影响,以及栅金属厚度对最大震荡频率,栅场板对截止频率、最大震荡频率和内部电场的影响。根据典型器件结构和材料参数的仿真表明,为了提高频率并减轻短沟道效应,栅长应取0.15~0.25um;减小栅与沟道的距离可略微改善短沟道效应,但会明显降低器件的饱和漏电流,综合考虑栅调制能力、饱和漏电流、短沟道效应三个方面,栅与沟道距离应取10~20nm;为了提高最大振荡频率,栅金属厚度应大于0.4um;缩小栅场板长度可有效提高器件的频率,兼顾Ka波段应用和提高击穿电压,栅场板长度应在0.3~0.4um左右。仿真得出的器件性能随结构参数的变化趋势以及尺寸数据对于Ka波段GaN HEMT的研究具有参考意义。     

具有栅源间本征GaN调制层的AlGaN/GaN HEMT

为解决常规AlGaN/GaN高电子迁移率晶体管(HEMT)因源极电子注入栅极右侧高场区造成的雪崩击穿,并提高器件的击穿电压,提出了一种具有栅源间本征GaN (i-GaN)调制层的新型AlGaN/GaN HEMT结构.新结构器件在反向耐压时将调制层下方部分区域的二维电子气(2DEG)完全耗尽,扩展了沟道的夹断区,有效阻止了源极电子向栅极右侧高场区的注入.仿真结果表明,通过设置适当的调制层长度和厚度,器件的击穿电压可从常规结构的862 V提升至新结构的1086 V,增幅达26％.同时,GaN调制层会微幅增大器件的比导通电阻,对阈值电压也具有一定的提升作用.     

输出功率密度为2.23W/mm的X波段AlGaN/GaN功率HEMT器件

MOCVD技术在蓝宝石衬底上制备出具有高迁移率GaN沟道层的AlGaN/GaN HEMT材料.高迁移率GaN外延层的室温迁移率达741cm2/(V·s),相应背景电子浓度为1.52×1016cm-3;非有意掺杂高阻GaN缓冲层的室温电阻率超过108Ω·cm,相应的方块电阻超过1012Ω/□.50mm HEMT外延片平均方块电阻为440.9Ω/□,方块电阻均匀性优于96％.用此材料研制出了0.2μm栅长的X波段HEMT功率器件,40μm栅宽的器件跨导达到250mS/mm,特征频率fT为77GHz;0.8mm栅宽的器件电流密度达到1.07A/mm,8GHz时连续波输出功率为1.78W,相应功率密度为2.23W/mm,线性功率增益为13.3dB.     

AlN阻挡层对AlGaN/GaN HEMT器件的影响

利用低压MOCVD技术在蓝宝石衬底上生长了AlGaN/GaN异质结和AlGaN/AlN/GaN异质结二维电子气材料,采用相同器件工艺制造出了AlGaN/GaN HEMT器件和AlGaN/AlN/GaN HEMT器件.通过对两种不同器件的比较和讨论,研究了AlN阻挡层的增加对AlGaN/GaN HEMT器件性能的影响.     

Recessed-gate structure approach toward normally off high-Voltage AlGaN/GaN HEMT for power electronics applications

A recessed-gate structure has been studied with a view to realizing normally off operation of high-voltage AlGaN/GaN high-electron mobility transistors (HEMTs) for power electronics applications. The recessed-gate structure is very attractive for realizing normally off high-voltage AlGaN/GaN HEMTs because the gate threshold voltage can be controlled by the etching depth of the recess without significant increase in on-resistance characteristics. With this structure the threshold voltage can be increased with the reduction of two-dimensional electron gas (2DEG) density only under the gate electrode without reduction of 2DEG density in the other channel regions such as the channel between drain and gate. The threshold-voltage increase was experimentally demonstrated. The threshold voltage of fabricated recessed-gate device increased to -0.14 V while the threshold voltage without the recessed-gate structure was about -4 V. The specific on-resistance of the device was maintained as low as 4 m/spl Omega//spl middot/cm/sup 2/ and the breakdown voltage was 435 V. The on-resistance and the breakdown voltage tradeoff characteristics were the same as those of normally on devices. From the viewpoint of device design, the on-resistance for the normally off device was modeled using the relationship between the AlGaN layer thickness under the gate electrode and the 2DEG density. It is found that the MIS gate structure and the recess etching without the offset region between recess edge and gate electrode will further improve the on-resistance. The simulation results show the possibility of the on-resistance below 1 m/spl Omega//spl middot/cm/sup 2/ for normally off AlGaN/GaN HEMTs operating at several hundred volts with threshold voltage up to +1 V.     

多栅指AlGaN/GaN HEMT器件自热效应研究

Self-heating in multi-finger AlGaN/GaN high-electron-mobility transistors(HEMTs) is investigated by measurements and modeling of device junction temperature under steady-state operation.Measurements are carried out using micro-Raman scattering to obtain the detailed and accurate temperature distribution of the device.The device peak temperature corresponds to the high field region at the drain side of gate edge.The channel temperature of the device is modeled using a combined electro-thermal model considering 2DEG transport characteristics and the Joule heating power distribution.The results reveal excellent correlation to the micro-Raman measurements, validating our model for the design of better cooled structures.Furthermore,the influence of layout design on the channel temperature of multi-finger AlGaN/GaN HEMTs is studied using the proposed electro-thermal model, allowing for device optimization.     

不同AlGaN层厚度的AlGaN/GaN高电子迁移率晶体管的静态特性

利用金属有机化合物气相外延技术研究了AlGaN/GaN高电子迁移率晶体管(HEMT)结构的外延生长及器件制作,重点比较了具有不同AlGaN层厚度的HEMT器件的静态特性.实验发现具有较薄AlGaN隔离层的结构表现出较好的器件特性.栅长为1μm的器件获得了650mA/mm的最大饱和电流密度和100mS/mm的最大跨导.     

Investigation of Self-Heating Effects in Submicrometer GaN/AlGaN HEMTs Using an Electrothermal Monte Carlo Method

An electrothermal Monte Carlo (MC) method is applied in this paper to investigate electron transport in submicrometer wurtzite GaN/AlGaN high-electron mobility transistors (HEMTs) grown on various substrate materials including SiC, Si, GaN, and sapphire. The simulation method is an iterative technique that alternately runs an MC electronic simulation and solves the heat diffusion equation using an analytical thermal resistance matrix method. Results demonstrate how the extent of the thermal droop in the I_d-V_ds characteristics and the device peak temperature depend upon both the biasing conditions and the substrate material type. Polarization effects are considered in the simulations, as they greatly influence electron transport in GaN/AlGaN HEMTs by creating a highly concentrated two-dimensional electron gas (2DEG) at the GaN/AlGaN interface. It is shown that a higher 2DEG density provides the devices with a better current handling capability but also increases the importance of the thermal effects     

InAlN/AlN/GaN HEMT器件特性研究

通过利用MOCVD生长的高质量蓝宝石衬底InAlN/AlN/GaN异质结材料,获得了高的二维电子气面密度,其值为1.65×10<'13>cm<'-2>.通过该结构制备了0.15 μm栅长InAlN/AIN/GaN HEMT器件,获得了相关的电学特性:最大电流密度为1.3A/mm,峰值跨导为260mS/ram,电流增益截...     

AlGaN/GaN/AlGaN双异质结材料生长及性质研究

基于能带理论设计并利用MOCVD技术在76.2 mm蓝宝石衬底上生长了不同GaN沟道层厚度的AlGaN/GaN/AlGaN双异质结材料.室温霍尔测试结果表明:双异质结材料的二维电子气面密度随沟道层厚度增加有所升高并趋于饱和;二维电子气迁移率则随沟道厚度增加明显升高.200 nm厚GaN沟道的双异质结材料方块电阻平均值3...     

Improved temperature model of AlGaN/GaN HEMT and device characteristics at variant temperature

In this paper, an improved temperature model for AlGaN/GaN high electron mobility transistor (HEMT) is presented. Research is being conducted for a high-performance building block for high frequency applications that combine lower costs with improved performance and manufacturability. The effects of channel conductance in the saturation region and the parasitic resistance due to the undoped GaN buffer layer have been included. The effect of both spontaneous and piezoelectric polarization induced charges at the AlGaN/GaN heterointerface has been incorporated. The proposed model is used to determine the transfer characteristics, output current-voltage characteristics and small-signal microwave parameters of HEMTs. The investigated temperature range is from 100–600 K. The small signal microwave parameters have been evaluated to determine the unity current gain cut-off frequency (f _T ). High f _T (10–70 GHz) values and high current levels (～550 mA/mm) are achieved for a 1 μm AlGaN/GaN HEMTs. A custom DC measurement system is used to facilitate the DC characterization of the unpackaged GaN HEMT test device. The calculated critical parameters and the simulation results suggest that the performance of the proposed device degrades at elevated temperatures.     

Characteristics of AlGaN/GaN/AlGaN double heteroj unction HEMTs with an improved breakdown voltage

正We studied the performance of AlGaN/GaN double heterojunction high electron mobility transistors (DH-HEMTs) with an AlGaN buffer layer,which leads to a higher potential barrier at the backside of the twodimensional electron gas channel and better carrier confinement.This,remarkably,reduces the drain leakage current and improves the device breakdown voltage.The breakdown voltage of AlGaN/GaN double heterojunction HEMTs (~ 100 V) was significantly improved compared to that of conventional AlGaN/GaN HEMTs(~50 V) for the device with gate dimensions of 0.5 x 100μm and a gate-drain distance of 1μm.The DH-HEMTs also demonstrated a maximum output power of 7.78 W/mm,a maximum power-added efficiency of 62.3%and a linear gain of 23 dB at the drain supply voltage of 35 V at 4 GHz.