共查询到20条相似文献,搜索用时 359 毫秒
1.
叶轮是整个挖泥泵的核心过流部件,其质量要求很高。大型挖泥泵叶轮铸件容易出现缩孔、气孔、冷隔等铸造缺陷。详细分析了叶轮不同部位缺陷产生的原因,针对浇冒口系统、型砂工艺、涂料、浇注工艺及打箱清理工序制定了防止缺陷产生的相关对策,使生产的大型挖泥泵叶轮铸件合格率达到95%以上。 相似文献
2.
研究了挤压铸造工艺条件下,工艺参数(挤压力、浇注温度、模具温度、加压前延迟时间)对Al-Cu合金铸件缺陷的影响.结果表明,挤压铸造有两个临界挤压力,即消除收缩类缺陷的最小挤压力Psc,以及避免宏观偏析的最大挤压力PMS.仅当PSC<P<PMS时,才能获得既无收缩缺陷又无宏观偏析的挤压铸件.随着挤压力的增加,晶间共晶相及共晶团聚等偏析组织的尺寸有所减小,数量也相应减少.浇注温度过高容易造成气孔、夹杂的形成,且明显减小PMS,导致宏观偏析及共晶偏析缺陷的产生.适当的模具温度和较短的加压前延迟时间是获得无铸造缺陷挤压铸件的必要条件. 相似文献
3.
阀体类铸件内腔结构复杂,其内腔油道间和铸件表面不允许存在气孔缺陷。分析了阀体类铸件产生气孔缺陷的原因。通过在制芯、造型、熔炼、浇注工序采取针对性措施,减少了阀体类铸件的气孔缺陷,对提高整机品质和降低制造成本有积极意义。 相似文献
4.
对实型铸件分层缺陷的特征及其形成机理进行了分析,认为在各种因素中,阶梯式浇注系统底层内浇道截面积小于直浇道截面积是分层缺陷形成的原因。提高金属液浇注温度及改进涂料,选用低密度泡沫塑料作模样材料对避免产生分层缺陷有帮助。 相似文献
5.
通过分析实型铸件分层缺陷的特征及其形成机理 ,认为在各种因素中 ,阶梯式浇注系统底层内浇道截面积小于直浇道截面积是分层缺陷形成的关键。提高金属液浇注温度及改良涂料 ,选用低密度泡沫塑料作模样材料对避免产生分层缺陷有帮助。 相似文献
6.
通过分析实型铸造铸件分层缺陷的特征及其形成机理,认为在各种因素中,阶梯式浇注系统底层内浇道截面积小于直浇道截面积是分层缺陷形成的关键,而提高金属液浇注温度及改良涂料、选用低密度泡沫塑料作模样材料对避免产生分层缺陷有帮助。 相似文献
7.
8.
张永青唐洪伟胡俊康赵志罡李小龙 《中国铸造装备与技术》2021,(1):64-68
介绍了扬柴铸造厂生产轻型柴油发动机机体铸件出现的一种气孔缺陷,描述了气孔缺陷的产生位置和该缺陷解决的过程.采用金相显微镜、扫描电镜和能谱分析对缺陷进行分析,确定该气孔缺陷为卷入性气孔缺陷.通过对铸造工艺流程的逐项排查,确定了气体来自连续保温浇注机的浇注塞杆.铸造厂技术人员对连续保温浇注机塞杆结构进行优化,解决了该气孔缺... 相似文献
9.
夹渣是砂型铸造中常见的一种铸造缺陷,尤其是铸件需要进行MT和UT检测的时候,夹渣缺陷是导致铸件报废的重要缺陷之一。封闭式浇注系统的应用能够很好地解决铸件夹渣问题,但是,需注意防止“伪封闭式浇注系统”,不同类型的浇注系统的设计要点也各不相同。 相似文献
10.
11.
12.
13.
14.
A. A. Babakov 《Metal Science and Heat Treatment》1967,9(10):764-770
Conclusions Highly alloyed steels and alloys are produced in conformity with GOST or technical specifications in thick and thin sheets, beams and channels, bars, hot-rolled and cold-rolled pipe, and rod. Castings are produced in the specialized plant of the Ministry of Chemical and Petroleum Machine Building.The technology of welding stainless steels and alloys is given in [15] and [16].TsNIIChERMET. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 10, pp. 43–50, October, 1967. 相似文献
15.
模具渗硼工艺及其发展应用 总被引:4,自引:0,他引:4
渗硼是提高模具使用寿命的重要途径,是在金属表面形成高硬度的金属硼化层,显著提高其耐磨性,且具有良好的耐热性和耐蚀性。近年来,随着渗硼工艺逐步改进和完善,已发展了复合渗、多元共渗及低温渗硼工艺,取得了良好的经济效果。 相似文献
16.
17.
《稀有金属材料与工程》2006,23(4):23-26
结合近年来现场试验与施工实践,分析研究了中小型镍材(工业纯镍)设备与管道的特点、性能、焊接缺陷与产生原因,以及防止与消除其缺陷、优化制造施焊质量的工艺措施,并总结了若干条注意事项。 相似文献
18.
19.
A. Yu. Tsivadze G. V. Ionova V. K. Mikhalko 《Protection of Metals and Physical Chemistry of Surfaces》2010,46(2):149-169
The possibility of using unique properties of lanthanides in the nanotechnology is demonstrated. The origination of linear
and nonlinear optical properties of lanthanide compounds with phthalocyanines, porphyrins, naphthalocyanines, and their analogs
in solutions and condensed state and the prospects of obtaining novel materials on their basis are discussed. Based on the
electronic structure and properties of lanthanides and their compounds, namely, optical and magnetic characteristics, electronic
and ionic conductivity, and fluctuating valence, molecular engines are classified. High-speed storage engines or memory storage
engines; photoconversion molecular engines based on Ln(II) and Ln(III); electrochemical molecular engines involving silicate
and phosphate glasses; molecular engines whose operation is based on insulatorsemiconductor, semiconductor-metal, and metal-superconductor
types of conductivity phase transitions; solid electrolyte molecular engines; and miniaturized molecular engines for medical
analysis are distinguished. It is shown that thermodynamically stable nanoparticles of Ln
x
M
y
composition can be formed by d elements of the second halves of the series, i.e., those arranged after M = Mn, Tc, and Re.
Prospects of using lanthanide superconductors in nanotechnology are considered. 相似文献