共查询到20条相似文献,搜索用时 504 毫秒
1.
2.
冶金硅氢氯化流化床是目前多晶硅生产工艺中实现四氯化硅(silicon tetrachloride, STC)循环利用的关键反应器。基于MP-PIC方法建立了冶金硅氢氯化流化床反应器模型。模型中反应源项采用总包反应动力学进行计算。在网格以及计算颗粒包含的真实颗粒数量无关性检验的基础上,对反应器内三氯氢硅(trichlorosilane, TCS)初始浓度进行了无关性检验。模型验证结果表明,模拟结果与实验值符合良好。反应器特征分析结果表明:TCS产率受化学平衡与气固两相流动因素共同控制;反应器操作压力对TCS产率的影响较小;提高进口H2/STC摩尔比,可以提高TCS产率但会降低H2的转化率。 相似文献
3.
冶金硅氢氯化流化床是目前多晶硅生产工艺中实现四氯化硅(silicon tetrachloride, STC)循环利用的关键反应器。基于MP-PIC方法建立了冶金硅氢氯化流化床反应器模型。模型中反应源项采用总包反应动力学进行计算。在网格以及计算颗粒包含的真实颗粒数量无关性检验的基础上,对反应器内三氯氢硅(trichlorosilane, TCS)初始浓度进行了无关性检验。模型验证结果表明,模拟结果与实验值符合良好。反应器特征分析结果表明:TCS产率受化学平衡与气固两相流动因素共同控制;反应器操作压力对TCS产率的影响较小;提高进口H2/STC摩尔比,可以提高TCS产率但会降低H2的转化率。 相似文献
4.
生物质流化床空气-水蒸气气化模型研究 总被引:2,自引:0,他引:2
根据流化床反应器特点,结合生物质气化动力学反应机理,建立了生物质在流化床内气化的等温稳态、一维二相动力学模型。该模型所做的主要假定如下:流化床分为气泡相和乳相,在气泡相和乳相内均存在化学反应,考虑二相内的轴向气体扩散,生物质热解过程瞬时完成,主要考虑焦碳以及CO,CO2,H2,H2O,CH4等在流化床内发生的8个主要化学反应。数学模型属于常微分方程组边值问题,利用数值计算软件M atlab7.0进行编程求解。以木粉为原料,将模型结果与实验结果进行了对比,模拟结果与试验数据符合良好,在一定程度上证明了模型的有效性和可靠性。 相似文献
5.
对工业乙烯氧氯化挡板流化床反应器建立了以两相理论为基础的多釜串联反应器模型,利用大量工业数据求解模型参数并检验模型,计算结果表明模拟值与工业值基本吻合.在此基础上,对反应器操作条件进行优化,得到不同生产负荷下的最优操作条件. 相似文献
6.
7.
以甲烷化循环流化床反应器为研究对象,采用计算颗粒流体力学(CPFD)方法,耦合了甲烷化反应动力学模型,实现了甲烷化在循环流化床中的反应过程。将模拟结果同文献中的实验数据进行了对比验证,获得了反应器的内部流场、温度场以及组分浓度分布。数值模拟研究了不同操作条件对甲烷化特性的影响规律。结果表明:催化剂颗粒在反应器内的流化行为对反应影响显著,反应器提升管固体密相区是反应进行的主要区域;通过提高反应压力和H2/CO(物质的量之比),降低空速,可以提高CO转化率和CH4收率。 相似文献
8.
基于神经网络和宏观动力学模型的流化床反应器离线故障诊断 总被引:1,自引:1,他引:0
采用人工神经网络与流化床反应器宏观动力学模型相结合的方法,对丙烯氨氧化流化床反应器的不正常操作进行了故障诊断.经过训练和可靠检验的神经网络能准确辨认故障的发生和类型,流化床反应器宏观动力学模型能根据其知识规则判断引起故障的原因,并提出相应的调节方法,直至反应器操作正常. 相似文献
9.
生物质催化气化实验研究 总被引:1,自引:0,他引:1
在常压流化床上进行了生物质在水蒸气条件下的实验研究。实验装置主体由常压流化床反应器和固定床催化裂解反应器组合而成。生物质原料为木屑,焦油裂解催化剂分别选用煅烧白云石和镍基重整催化剂。实验结果表明,H2/CO(H/C)的摩尔比随着气化温度、水蒸气质量/生物质质量(S/B)的升高迅速增加,但催化裂解温度变化对H/C的影响较小。另外,在催化裂解反应器中使用催化剂种类不同,H/C也不同。本文采用两段催化裂解,一段催化剂采用煅烧白云石,二段采用镍基催化剂,焦油裂解率达到96.70%。采用两段催化裂解,不但可以提高焦油的裂解率,增加了H2和CO收率,净化生物质裂解气,而且可以防止镍基重整催化剂失活,延长其使用寿命。 相似文献
10.
基于NiO载氧体的煤化学链燃烧实验 总被引:2,自引:2,他引:2
采用流化床反应器并以水蒸气作为气化-流化介质,研究了以NiO为载氧体在800~960℃内的煤化学链燃烧反应特性。实验结果表明,载氧体与煤气化产物在反应器温度高于900℃体现了高的反应活性。随着流化床反应器温度的提高,气体产物中CO2的体积浓度(干基)呈单调递增;CO、H2、CH4的体积浓度(干基)呈单调递减;煤中碳转化为CO2的比率逐渐递增,碳的残余率逐渐递减。反应器出口气体CO2、CO、H2、CH4的生成率随反应时间呈单峰特性,H2生成率的峰值远小于CO的峰值;且随反应器温度升高,CO2生成率升高,CO、H2、CH4的生成率降低。反应温度高于900℃时,流化床反应器NiO载氧体煤化学链燃烧在9 min之内就基本完成,CO2含量高于92%。 相似文献
11.
12.
M. S. J. Simmonds W. M. Blaney F. Delle Monache M. Marquina Mac-Quhae G. B. Marini Bettolo 《Journal of chemical ecology》1985,11(12):1593-1599
Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria. 相似文献
13.
14.
Cheng-Le Zhao Shane Porzio Alan Smith Haiyan Ge H. T. Davis L. E. Scriven 《Journal of Coatings Technology and Research》2006,3(2):109-115
Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively.
There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized.
High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without
the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of
fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to
achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic
SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve
F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender
particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing,
and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing
or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually
preserves suspension stability during freezing.
Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago,
IL. Tied for first place in The John A. Gordon Best Paper Competition. 相似文献
15.
Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US
In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae
and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted
in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures
(release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species
(Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species
to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were
exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of
separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles
from the southeastern region of the US. 相似文献
16.
17.
18.
Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed. 相似文献
19.
中蓝晨光化工研究院有限公司《塑料工业》编辑部 《塑料工业》2009,37(3)
收集了2007年7月~2008年6月世界塑料工业的相关资料,介绍了2007~2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍. 相似文献
20.
中蓝晨光化工研究院《塑料工业》编辑部 《塑料工业》2007,35(3):1-25,67
收集了2005年7月~2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。 相似文献