Highly strong and conductive carbon nanotube/cellulose composite paper

Carbon nanotube (CNT)/cellulose composite materials were fabricated in a paper making process optimized for a CNT network to form on the cellulose fibers. The measured electric conductivity was from 0.05 to 671 S/m for 0.5–16.7 wt.% CNT content, higher than that for other polymer composites. The real permittivities were the highest in the microwave region. The unique CNT network structure is thought to be the reason for these high conductivity and permittivity values. Compared to other carbon materials, our carbon CNT/cellulose composite material had improved parameters without decreased mechanical strength. The near-field electromagnetic shielding effectiveness (EMI SE) measured by a microstrip line method depended on the sheet conductivity and qualitatively matched the results of electromagnetic field simulations using a finite-difference time-domain simulator. A high near-field EMI SE of 50-dB was achieved in the 5–10 GHz frequency region with 4.8 wt.% composite paper. The far-field EMI SE was measured by a free space method. Fairly good agreement was obtained between the measured and calculated results. Approximately 10 wt.% CNT is required to achieve composite paper with 20-dB far-field EMI SE.     

Liquid sensing properties of melt processed polypropylene/poly(ε-caprolactone) blends containing multiwalled carbon nanotubes

The sensing properties of polypropylene (PP)/poly(ε-caprolactone) (PCL) blends containing multiwalled carbon nanotubes (MWNT) were studied in terms of their electrical resistance change in presence of liquids (solvents). The preparation of co-continuous blends based on the double percolation concept was done by melt mixing of electrically conductive PCL composites containing 3 wt.% MWNT and neat PP in ratios of 30:70, 40:60, and 50:50. The electrical resistance change of the PCL-MWNT composites and blends was monitored in a solvent immersion/drying cycle. Various solvents, such as n-hexane, ethanol, methanol, water, toluene, chloroform, and tetrahydrofuran were successfully detected, yielding different responses and reversibility of the resistance changes.PP and PCL were tested separately for solvent sorption using ethanol and n-hexane, both showing a low sorption of n-hexane. Ethanol sorption was large for PCL and almost absent for PP. The 50/50 blend composites with 3 wt.% MWNT in the PCL phase presented larger resistance changes for n-hexane, showing larger sensing ability for this solvent compared to PCL composites with 1 and 3 wt.% loadings. The opposite response was observed for immersion in ethanol where the PCL-MWNT composites showed larger changes than the blends. As the ratio of the conductive PCL phase over PP in the blend composition (i.e. the overall MWNT content) decreased, larger resistance changes were observed. The liquid sensing properties of compression-moulded discs and melt-drawn filaments were compared indicating higher responses for the discs.     

Fabrication of polypropylene/carbon nanotubes composites via a sequential process of (rotating solid-state mixing)-plus-(melt extrusion)

In this study, a simple but effective method to realize excellent comprehensive performances in polypropylene (PP)/multi-walled carbon nanotubes (MWNTs) was developed. Before melt extrusion, solid-state iPP powders and MWNTs were pre-mixed upon high-speed rotating. By this way, the dispersion extent of nanotubes was significantly improved as comparing to the common one-step melt extrusion strategy. As validated by scanning electron microscopy, most of MWNTs exist as a form of filament bundles with size of hundreds nanometers; no obvious agglomerate was found even at high MWNTs content, 5%. The improvements of the major mechanical properties and electric conductivity were much efficient for the composites obtained via the two-step process of rotating solid-state mixing (RSSM)-plus-melt extrusion. The tensile strength, Young’s modulus and impact strength at 5% MWNTs content were enhanced for 35%, 42% and 45%, respectively, indicating an excellent strength-rigidity-toughness balance, which was hardly achieved in polyolefin/carbon nanotubes composite. It is believed that the method developed in this study is so far the most effective and convenient for efficiently dispersing nanotubes into the nonpolar, intractable thermoplastics and resulting in good properties, among a variety of fabrication method suggested in the previous researches. Importantly, the used RSSM equipment is a kind of frequently used dispersion machine, thus it has tremendous potential to be applied in industrial producing immediately.     

Fabrication and mechanical properties of well-dispersed multiwalled carbon nanotubes/epoxy composites

Multiwalled carbon nanotubes (MWCNTs)/epoxy nanocomposites were fabricated by using ultrasonication and the cast molding method. In this process, MWCNTs modified by mixed acids were well dispersed and highly loaded in an epoxy matrix. The effects of MWCNTs addition and surface modification on the mechanical performances and fracture morphologies of composites were investigated. It was found that the tensile strength improved with the increase of MWCNTs addition, and when the content of MWCNTs loading reached 8 wt.%, the tensile strength reached the highest value of 69.7 MPa. In addition, the fracture strain also enhanced distinctly, implying that MWCNTs loading not only elevated the tensile strength of the epoxy matrix, but also increased the fracture toughness. Nevertheless, the elastic modulus reduced with the increase of MWCNTs loading. The reasons for the mechanical property changes are discussed.     

Manufacturing techniques and property evaluations of conductive composite yarns coated with polypropylene and multi-walled carbon nanotubes

This study uses a melt extrusion method, a method for producing wires, to coat polyester (PET) yarns with polypropylene (PP) and multi-walled carbon nanotubes (MWCNTs). The resulting PP/MWCNTs-coated PET conductive yarns are tested for their tensile properties, processability, morphology, melting and crystallization behaviors, electrical conductivity, and applications. The test results indicate that tensile strength of the conductive yarns increases with an increase in the coiling speed that contributes to a more single-direction-orientated MWCNTs arrangement as well as a greater adhesion between PP/MWCNTs and PET yarns. 8 wt% MWCNTs results in an 18 °C higher crystallization temperature (T_c) of PP and an electrical conductivity of 0.8862 S/cm. The test results of this study have proven that this form of processing technology can prepare PP/MWCNTs-coated PET conductive yarns that have satisfactory tensile properties and electrical conductivity, and can be used in functional woven fabrics and knitted fabrics.     

Selective location and conductive network formation of multiwalled carbon nanotubes in polycarbonate/poly(vinylidene fluoride) blends

Multiwalled carbon nanotubes (MWCNTs)-filled polycarbonate (PC), poly(vinylidene fluoride) (PVDF) and PC/PVDF conductive composites were fabricated using melt mixing, respectively. The dynamic process of MWCNTs conductive network formation in the composites was in situ traced by recording the variation of electrical resistivity with time during annealing treatments. As a result, the percolation threshold for the MWCNTs-filled PC/PVDF system was much lower than those of MWCNTs-filled individual polymers and the MWCNTs were selectively located in the PC phase of PC/PVDF composite, which had been verified by scanning electron microscopy measurements. The activation energy of conductive network formation for PC/PVDF/MWCNTs composite was close to that of the PC/MWCNTs system, which further confirmed that MWCNTs were dispersed mainly in the PC phase. Furthermore, the assembly velocity of MWCNTs in the polymer melt increased with annealing temperature.     

A strategy for improving mechanical properties of a fiber reinforced epoxy composite using functionalized carbon nanotubes

Carbon fiber reinforced epoxy composite laminates are studied for improvements in quasi static strength and stiffness and tension-tension fatigue cycling at stress-ratio (R-ratio) = +0.1 through strategically incorporating amine functionalized single wall carbon nanotubes (a-SWCNTs) at the fiber/fabric-matrix interfaces over the laminate cross-section. In a comparison to composite laminate material without carbon nanotube reinforcements there are modest improvements in the mechanical properties of strength and stiffness; but, a potentially significant increase is demonstrated for the long-term fatigue life of these functionalized nanotube reinforced composite materials. These results are compared with previous research on the cyclic life of this carbon fiber epoxy composite laminate system reinforced similarly with side wall fluorine functionalized industrial grade carbon nanotubes. Optical and scanning electron microscopy and Raman spectrometry are used to confirm the effectiveness of this strategy for the improvements in strength, stiffness and fatigue life of composite laminate materials using functionalized carbon nanotubes.     

A comparative study of the electrical and mechanical properties of epoxy nanocomposites reinforced by CVD- and arc-grown multi-wall carbon nanotubes

In this study, three different types of multi-wall carbon nanotubes (MWCNTs) were compared as nanostructured reinforcements in epoxy polymers: commercially available CVD-MWCNTs, synthesised in an industrial process, aligned-CVD-MWCNTs and arc-grown MWCNTs, both obtained from a lab-scale processes. The nanocomposite properties were characterised by means of electron microscopy, rheological, electrical and mechanical methods. Industrial CVD-MWCNTs are favourable for the implication of an electrical conductivity in the epoxy due to their high tendency to form conducting networks. The less entangled structure of aligned-CVD-MWCNTs turns out to be favourable for an easy dispersion and low viscosity in epoxy at similar conductivities compared to the CVD-MWCNTs. Additionally, they provide the highest increase in fracture toughness (∼17%). Arc-grown MWCNTs do not offer any electrical conductivity in epoxy without sufficient purification methods. Their high level of impurities and short length further complicate the transfer of their good electrical and mechanical properties into the nanocomposite.     

Preparation and properties of poly (p-phenylene sulfide)/multiwall carbon nanotube composites obtained by melt compounding

In this paper, electrical and mechanical properties of Poly (p-phenylene sulfide) (PPS)/multi-wall carbon nanotubes (MWNTs) nanocomposites were reported. The composites were obtained just by simply melt mixing PPS with raw MWNTs without any pre-treatment. The dispersion of MWNTs and interfacial interaction were investigated through SEM &TEM and Raman spectra. The rheological test and crystallization behavior were also investigated to study the effects of MWNTs concentration on the structure and chain mobility of the prepared composites. Though raw MWNTs without any pre-treatment were used, a good dispersion and interaction between PPS and MWNTs have been evidenced, resulting in a great improvement of electrical properties and mechanical properties of the composites. Raman spectra showed a remarkable decrease of G band intensity and a shift of D bond, demonstrating a strong filler–matrix interaction, which was considered as due to π–π stacking between PPS and MWNTs. The storage modulus (G′) versus frequency curve presented a plateau above the percolation threshold of about 2–3 wt% with the formation of an interconnected nanotube structure, indicative of ‘pseudo-solid-like’ behavior. Meanwhile, a conductive percolation threshold of 5 wt% was achieved and the conductivity of nanocomposites increased sharply by several orders of magnitude. The difference between electrical and rheological percolation threshold, and the effect of critical percolation on the chain mobility, especially on crystallization behavior of PPS, were discussed. In summary, our work provides a simple and fast way to prepare PPS/MWNTs nanocomposites with good dispersion and improved properties.     

Multifunctional CuO nanowire embodied structural supercapacitor based on woven carbon fiber/ionic liquid–polyester resin

Novel structural supercapacitors based on CuO nanowires and woven carbon fiber (WCF) has been developed for the first time employing vacuum assisted resin transfer molding (VARTM) process. The growth of CuO nanowires on WCF is an efficient process and can be used in structural capacitors which can trigger the electric vehicle industries toward a new direction. The specific surface area of the carbon fiber was enhanced by NaOH etching (41.36 m² g⁻¹) and by growing CuO nanowires (132.85 m² g⁻¹) on the surface of the WCF. The specific capacitance of the CuO–WCF based supercapacitor was 2.48 F g⁻¹, compared with 0.16 F g⁻¹ for the bare WCF-based supercapacitor. The usage of ionic liquid and lithium salt improved the capacitance to 5.40 and 6.75 F g⁻¹ with lowest ESR and R_p values of 133 and 1240 Ω along with improving mechanical properties within an acceptable range. The energy and power densities were also increased up to 106.04 mW h kg⁻¹ and 12.57 W kg⁻¹. Thus, this study demonstrated that growing CuO nanowires on the surface of WCF is a novel approach to improve multifunctionality that could be exploited in diverse applications such as electric cars, unmanned aerial vehicles (UAVs), and portable electronic devices.     

Highly conducting poly(methyl methacrylate)/carbon nanotubes composites: Investigation on their thermal, dynamic-mechanical, electrical and dielectric properties

Nanocomposites of poly(methyl methacrylate) (PMMA) containing various multi-walled carbon nanotubes (MWCNT) contents were prepared using melt mixing. Several techniques were employed to study the influence of the MWCNT addition on the thermal, mechanical, electrical and dielectric properties of the PMMA matrix. The electrical percolation threshold (p_c) was found to be 0.5 vol.% by performing AC and DC conductivity measurements. Significantly high conductivity levels (σ_dc) were achieved: σ_dc exceeds 10⁻² S/cm already at 1.1 vol.%, the criterion for EMI shielding (σ_dc > 10⁻¹ S/cm) is fulfilled at 2.9 vol.%, and the highest loaded sample (5.2 vol.%) gave a maximum value of 0.5 S/cm. Dielectric relaxation spectroscopy measurements in broad frequency (10⁻¹−10⁶ Hz) and temperature ranges (−150 to 170 °C) indicated weak polymer-filler interactions, in consistency with differential scanning calorimetry and dynamic-mechanical analysis findings. Weak polymer-filler interactions and absence of crystallinity facilitate the achievement of high conductivity levels in the nanocomposites.     

Morphological changes of carbon nanotubes in polyethylene matrices under oscillatory tests as determined by dielectrical measurements

By combining a high sensitive dielectric sensor into a parallel plate rheometer, the time evolution of the dielectric properties of polyethylene/carbon nanotube composites was measured in the molten state under oscillatory shear. Composites with single- (SWCNT) or multiwall (MWCNT) carbon nanotubes initially decrease its conductivity proportional to the oscillatory shear-strain applied. After this initial drop, some composites increase the conductivity under these non-quiescent conditions reflecting a possible shear-induced agglomeration process. The latter based on the complex permittivity spectrum showing a shortening in the CNT-CNT distances in these composites after shear. At concentrations below the electrical percolation threshold, the presence of both SWCNTs and MWCNTs reduces the DC conductivity of the molten matrices. This result shows that carbon nanotubes can act as a scavenger for impurities or additives present in commercial polyethylenes.     

Highly conductive graphite/carbon fiber/cellulose composite papers

Papermaking techniques were used to produce graphite/carbon fiber/cellulose fiber composite papers with tunable electrical conductivity and good mechanical properties.     

Electrical and mechanical characterization of stretchable multi-walled carbon nanotubes/polydimethylsiloxane elastomeric composite conductors

Stretchable, elastomeric composite conductor made of multi-walled carbon nanotubes (MWNTs) and polydimethylsiloxane (PDMS) has been fabricated by simple mixing. Electrical percolation threshold, amount of filler at which a sharp decrease of resistance occurs, has been determined to be ∼0.6 wt.% of MWNTs. The percolation threshold composition has also been confirmed from swelling experiments of the composite; the equilibrium swelling ratio slightly increases up to ∼0.6 wt.%, then decreases at higher amount of filler MWNTs. Upon cyclic stretching/release of the composite, a fully reversible electrical behavior has been observed for composites having filler content below the percolation threshold value. On the other hand, hysteretic behavior was observed for higher filler amount than the threshold value, due to rearrangement of percolative paths upon the first cycle of stretching/release. Finally, mechanical moduli of the composites have been measured and compared by buckling and microtensile test. The buckling-based measurement has led to systematically higher (∼20%) value of moduli than those from microtensile measurement, due to the internal microstructure of the composite. The elastic conductor may help the implementation of various stretchable electronic devices.     

Synthesis and characterization of conductive polypyrrole/multi-walled carbon nanotubes composites with improved solubility and conductivity

High conductivity and solubility of polypyrrole (PPy)/multi-walled carbon nanotubes (MWCNT) composites has been successfully synthesized by in situ chemical oxidation polymerization using various concentrations of cationic polyelectrolyte poly(styrenesulfonate) (PSS) and ammonium peroxodisulfate (APS). Raman spectroscopy, FTIR, EPR, FESEM and HRTEM were used to characterize their structure and morphology. These images of FESEM and HRTEM showed that the fabricated PPy/MWCNT composites are one-dimensional core-shell structures with the average thickness of the PPy/MWCNT composites without PSS is about 250 nm and considerably decreases to 100–150 nm by adding the PSS content. The results of Raman spectrum, FTIR and UV–Vis indicate the synthesized PPy/MWCNT composites are in the doped state. The conductivities of PPy/MWCNT composites synthesized with the weight ratio of PSS/pyrrole monomer at 0.5 are about two times of magnitude higher than that of PPy/MWCNT composites without PSS. These results are perhaps due to the part of cationic electrolyte served as a dopant can be incorporated to the PPy structure to improve the conductivity of fabricated PPy/MWCNT composites.     

Liquid sensing properties of fibres prepared by melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes

Poly(lactic acid) (PLA)/multi-walled carbon nanotube (MWNT) composites were melt spun with different take-up velocities (max. 100 m/min) to obtain electrically conductive fibres. The incorporation of MWNT contents between 0.5 and 5.0 wt.% was realised in a previous melt mixing process using twin-screw extrusion. The relative resistance change of the fibres caused by contact with different solvents (water, n-hexane, ethanol, methanol) and solvent concentrations was used as liquid sensing response, whereas the time dependent resistance was recorded during immersion and drying cycles. Transmission electron microscopy and Raman spectroscopy indicated enhanced orientation of MWNT along the fibre axis with take-up velocity, resulting in decreased sensitivity during solvent contact. Additionally, sensitivity decreased as the weight content of MWNT increased and was furthermore dependent on the characteristics of used solvents. In context with the targeted application of leakage detection, fibres with low MWNT amount and low draw down ratio (as extruded fibres with 2 wt.% MWNT) are suitable, as they showed relative resistance changes of up to 87% after 10 min immersion in methanol even if the recovery upon drying was suppressed significantly.     

Influence of single-walled carbon nanotubes on the effective elastic constants of poly(ethylene terephthalate)

Poly(ethylene terephthalate) (PET) is one of the most extensively used thermoplastic polyesters out on the market, and it has been implemented in many forms. There has been limited work in the area of PET reinforced with single-walled carbon nanotubes (SWCNT) in mechanical properties. Nanocomposites based on PET with small contents of SWCNT were prepared by in situ polymerization. Elastic constants were determined by tensile tests performed on specimens instrumented with strain gauges. Assuming random orientation distribution of nanotubes, experimental Young’s modulus and Poisson’s ratio values were compared to some micromechanical models (Cox and Krenchel, Halpin–Tsai and Mori–Tanaka) which take into account orientation and aspect ratio of the nanotubes. However, the waviness of the nanotubes is a factor that influences the reinforcing efficiency.     

Processing and electrical properties of carbon nanotube/vinyl ester nanocomposites

Vinyl ester resins are often utilized in advanced naval composite structures due to the relatively low viscosity of the resin and the capability to cure at ambient temperatures. These qualities facilitate the production of large naval composite structures using resin infusion techniques. Vinyl ester monomer was synthesized from the epoxy resin to overcome processing challenges associated with volatility of the styrene monomer in vinyl ester resin. In this research we have investigated the use of a calendering approach for dispersion of multi-walled carbon nanotubes in vinyl ester monomer, and the subsequent processing of nanotube/vinyl ester composites. The high aspect ratios of the carbon nanotubes were preserved during processing and enabled the formation of a conductive percolating network at low nanotube concentrations. An electrical percolation threshold below 0.1 wt.% carbon nanotubes in vinyl ester was observed. Formation of percolating carbon nanotube networks at low concentration holds promise for the utilization of carbon nanotubes as in situ sensors for detecting deformation and damage in advanced naval composites.     

Piezoresistive and compression resistance relaxation behavior of water blown carbon nanotube/polyurethane composite foam

The in-situ bulk polycondensation process in combination with a ball milling dispersion process was used to prepare the water blown multiwall carbon nanotubes (CNT)/polyurethane (PU) composite foam. The mechanical properties, piezoresistive properties, strain sensitivity, stress and resistance relaxation behaviors of the composite foams were investigated. The results show that the CNT/PU composite foam has a better compression strength than the unfilled polyurethane foams and a negative pressure coefficient behavior under uniaxial compression. The resistance response of CNT/PU nanocomposites foam under cyclic compressive loading was quite stable. The nanocomposite foam containing a weight fraction of carbon nanotubes close to the percolation threshold presents the largest strain sensitivity for the resistance. The characteristic of resistance relaxation of CNT/PU composite foam is different from the stress relaxation due to the different relaxation mechanism. During compressive stress relaxation, the CNT/PU foam composites have excellent resistance recoverability while poor stress recoverability.     

Electrical and thermal properties of polyamide 12 composites with hybrid fillers systems of multiwalled carbon nanotubes and carbon black

Hybrid filler systems of multiwalled carbon nanotubes (MWCNTs) and carbon black (CB) were incorporated into two types of polyamide 12 (PA12) using small-scale melt mixing in order to identify potential synergistic effects on the interaction of these two electrical conductive fillers. Although no synergistic effects were observed regarding the electrical percolation threshold, at loadings well above the percolation threshold higher volume conductivities were obtained for samples containing both, MWCNT and CB, as compared to single fillers. This effect was more pronounced when using a higher viscous PA12 matrix. The formation of a co-supporting network can be assumed. The combined use of CB and MWCNTs improved the macrodispersion of MWCNT agglomerates, which can be assigned as a synergistic effect. DSC measurements indicated an effect of the nanofiller on crystallisation temperatures of PA12; however this was independent of the kind or amount of the carbon nanofiller.