Effect of carbon nanotubes on the mechanical properties and crystallization behavior of poly(ether ether ketone)

Pristine carbon nanotubes (CNTs) and noncovalently functionalized carbon nanotubes (f-CNTs) were used to prepare poly(ether ether ketone) (PEEK) composites (CNTs/PEEK and f-CNTs/PEEK) via melt blending. Noncovalently functionalized multiwalled nanotubes were synthesized using hydrogen-bonding interactions between sulfonic groups of sulfonated poly(ether ether ketone) (SPEEK) and carboxylic groups of nanotubes treated by acid (CNTs–COOH). The effects of these two kinds of nanotubes on the mechanical properties and crystallization behavior of PEEK were investigated. CNTs improved mechanical properties and promoted the crystallization rate of PEEK as a result of heterogeneous nucleation. Better enhancement of mechanical properties appeared in the f-CNTs/PEEK composites, which is ascribed to the good interaction between f-CNTs and PEEK. However, the strong interaction of f-CNTs and PEEK chains decreased the crystallization rate of PEEK for high content of f-CNTs.     

Overall behavior and microstructural deformation of R-CNT/polymer composites

Carbon nanotubes (CNTs) are an excellent candidate for the reinforcement of composite materials owing to their distinctive mechanical and electrical properties. Reticulate carbon nanotubes (R-CNTs) with a 2D or 3D configuration have been manufactured in which nonwoven connected CNTs are homogeneously distributed and connected with each other. A composite reinforced by R-CNTs can be fabricated by infiltrating a polymer into the R-CNT structure, which overcomes the inherent disadvantages of the lack of weaving of the CNTs and the low strength of the interface between CNTs and the polymer. In this paper, a 2D plane strain model of a R-CNT composite is presented to investigate its micro-deformation and effective stiffness. Using the two-scale expansion method, the effective stiffness coefficients and Young’s modulus are determined. The influences of microstructural parameters on the micro-deformation and effective stiffness of the R-CNT composite are studied to aid the design of new composites with optimal properties. It is shown that R-CNT composites have a strong microstructure-dependence and better effective mechanical properties than other CNT composites.     

In situ polymerized nanocomposites: Polystyrene/CNT and Poly(methyl methacrylate)/CNT composites

Carbon nanotubes (CNTs) were incorporated into polystyrene (PS) and poly(methyl methacrylate) (PMMA) matrices via in situ emulsion and emulsion/suspension polymerization methods. The polymerizations were carried out using various initiators, surfactants, and carbon nanotubes to determine their influence on polymerization and on the properties of the composites. The loading of CNTs in the composites varied from 0 to 15 wt.%, depending on the CNTs used. Morphology and dispersion of the CNTs were analyzed by transmission and scanning electron microscopy techniques. The dispersion of multi-walled carbon nanotubes (MWCNT) in the composites was excellent, even at high CNT loading. The mechanical properties, and electrical and thermal conductivities, of the composites were also analyzed. Both electrical and thermal conductivities were improved.     

Interface enhancement of carbon nanotube/mesocarbon microbead isotropic composites

Carbon nanotubes (CNTs) are incorporated into mesocarbon microbead (MCMB)-derived isotropic graphite to improve their mechanical properties. CNTs are homogenously distributed on the MCMB surface by acid-treatment and mechanical mixing. The composites are prepared by cold isostatic pressing, carbonization, and graphitization. The mechanical properties and isotropy ratios of the CNT/MCMB composites are determined by four-point bend tests and thermal expansion measurements, respectively. The addition of CNTs improves the flexural strength by ca. 20%, while keeps a low isotropy ratio. CNTs dispersed on particle interfaces improve the interfacial strength, this reinforcing mechanism is confirmed by a fracture mode analysis with scanning electron microscope.     

Properties of composites of carbon nanotube fibres

Composites have set the standard for high strength materials for several decades. With the discovery of nanotubes, new possibilities for reinforced composites have arisen, with potential mechanical properties superior to those of currently available materials. This paper reports the properties of epoxy matrix reinforced with fibres of carbon nanotubes (CNTs) which, in many ways, are similar to standard composites reinforced with commercial fibres. The composites were formed by the back diffusion of the uncured epoxy into an array of aligned fibres of CNTs. The fibre density and volume fraction were measured from thermogravimetric analysis (TGA). Properties in tension and compression were measured, and the level of fibre–matrix interaction analysed fractographically. The results show the significant potential for this route to CNT reinforcement.     

Influence of carbon nanotube-polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene

Study was made of the effect of multiwall carbon nanotubes (MWCNTs) and polymeric compatibilizer on thermal, mechanical, and tribological properties of high density polyethylene (HDPE). The composites were prepared by melt mixing in two steps. Carbon nanotubes (CNTs) were melt mixed with maleic anhydride grafted polyethylene (PEgMA) as polymeric compatibilizer to produce a PEgMA-CNT masterbatch containing 20 wt% of CNTs. The masterbatch was then added to HDPE to prepare HDPE nanocomposites with CNT content of 2 or 6 wt%. The unmodified and modified (hydroxyl or amine groups) CNTs had similar effects on the properties of HDPE-PEgMA indicating that only non-covalent interactions were achieved between CNTs and matrix. According to SEM studies, single nanotubes and CNT agglomerates (size up to 1 μm) were present in all nanocomposites regardless of content or modification of CNTs. Addition of CNTs to HDPE-PEgMA increased decomposition temperature, but only slight changes were observed in crystallization temperature, crystallinity, melting temperature, and coefficient of linear thermal expansion (CLTE). Young’s modulus and tensile strength of matrix clearly increased, while elongation at break decreased. Measured values of Young’s moduli of HDPE-PEgMA-CNT composites were between the values of Young’s moduli for longitudinal (E₁₁) and transverse (E₂₂) direction predicted by Mori-Tanaka and Halpin-Tsai composite theories. Addition of CNTs to HDPE-PEgMA did not change the tribological properties of the matrix. Because of its higher crystallinity, PEgMA possessed significantly different properties from HDPE matrix: better mechanical properties, lower friction and wear, and lower CLTE in normal direction. Interestingly, the mechanical and tribological properties and CLTEs of HDPE-PEgMA-CNT composites lie between those of PEgMA and HDPE.     

碳纳米管增强金属基复合材料电学性能研究进展

碳纳米管(CNTs)具有极高的力学性能、优异的导电和导热性能,被视为理想的复合材料增强相。CNTs增强复合材料已成为一个极为重要的研究领域。然而,由于CNTs与金属基体间相容性、增强体空间分布难以控制、CNTs本身载流量高而电导率相对较低等,CNTs增强金属基复合材料尚未展现出对金属基体电学性能的显著提升,或者无法有效兼顾电学性能和力学性能,整体研究仍处于起步阶段。鉴于此,从预处理、制备方法和电学机制分析等方面概述了CNTs增强金属基复合材料电学性能的研究现状,并展望了该领域的未来发展趋势。      

Synthesis of sea urchin-like carbon nanotubes on nano-diamond powder

Carbon nanotubes (CNTs) have unique atomic structure and properties, such as a high aspect ratio and high mechanical, electrical and thermal properties. On the other hand, the agglomeration and entanglement of CNTs restrict their applications. Sea urchin-like multiwalled carbon nanotubes, which have a small aspect ratio, can minimize the problem of dispersion. The high hardness, thermal conductivity and chemical inertness of the nano-diamond powder make it suitable for a wide range of applications in the mechanical and electronic fields. CNTs were synthesized on nano-diamond powder by thermal CVD to fabricate a filler with suitable mechanical properties and chemical stability. This paper reports the growth of CNTs with a sea urchin-like structure on the surface of the nano-diamond powder. Nano-diamond powders were dispersed in an attritional milling system using zirconia beads in ethanol. After the milling process, 3-aminopropyltrimethoxysilane (APS) was added as a linker. Silanization was performed between the nano-diamond particles and the metal catalyst. Iron chloride was used as a catalyst for the fabrication of the CNTs. After drying, catalyst-attached nano-diamond powders could be achieved. The growth of the carbon nanotubes was carried out by CVD. The CNT morphology was examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mean diameter and length of the CNTs were 201 nm and 3.25 microm, respectively.     

State of the Art of Carbon Nanotube Fibers: Opportunities and Challenges

The superb mechanical and physical properties of individual carbon nanotubes (CNTs) have provided the impetus for researchers in developing high‐performance continuous fibers based upon CNTs. The reported high specific strength, specific stiffness and electrical conductivity of CNT fibers demonstrate the potential of their wide application in many fields. In this review paper, we assess the state of the art advances in CNT‐based continuous fibers in terms of their fabrication methods, characterization and modeling of mechanical and physical properties, and applications. The opportunities and challenges in CNT fiber research are also discussed.     

Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites

The interest in carbon nanotubes (CNTs) as reinforcements for aluminium (Al) has been growing considerably. Efforts have been largely focused on investigating their contribution to the enhancement of the mechanical performance of the composites. The uniform dispersion of CNTs in the Al matrix has been identified as being critical to the pursuit of enhanced properties. Ball milling as a mechanical dispersion technique has proved its potential. In this work, we use ball milling to disperse up to 5 wt.% CNT in an Al matrix. The effect of CNT content on the mechanical properties of the composites was investigated. Cold compaction and hot extrusion were used to consolidate the ball-milled Al–CNT mixtures. Enhancements of up to 50% in tensile strength and 23% in stiffness compared to pure aluminium were observed. Some carbide formation was observed in the composite containing 5 wt.% CNT. In spite of the observed overall reinforcing effect, the large aspect ratio CNTs used in the present study were difficult to disperse at CNT wt.% greater than 2, and thus the expected improvements in mechanical properties with increase in CNT weight content were not fully realized.     

Carbon nanotubes for biomedical applications

Carbon nanotubes (CNTs) have many unique physical, mechanical, and electronic properties. These distinct properties may be exploited such that they can be used for numerous applications ranging from sensors and actuators to composites. As a result, in a very short duration, CNTs appear to have drawn the attention of both the industry and the academia. However, there are certain challenges that need proper attention before the CNT-based devices can be realized on a large scale in the commercial market. In this paper, we report the use of CNTs for biomedical applications. The paper describes the distinct physical, electronic, and mechanical properties of nanotubes. The basics of synthesis and purification of CNTs are also reviewed. The challenges associated with CNTs, which remain to be fully addressed for their maximum utilization for biomedical applications, are discussed.     

Carbon nanotube reinforced polymer composites—A state of the art

Because of their high mechanical strength, carbon nanotubes (CNTs) are being considered as nanoscale fibres to enhance the performance of polymer composite materials. Novel CNT-based composites have been fabricated using different methods, expecting that the resulting composites would possess enhanced or completely new set of physical properties due to the addition of CNTs. However, the physics of interactions between CNT and its surrounding matrix material in such nano-composites has yet to be elucidated and methods for determining the parameters controlling interfacial characteristics such as interfacial shear stress, is still challenging. An improvement of the physical properties of polymer nanocomposites, based on carbon nanotubes (CNTs), is addicted to a good dispersion and strong interactions between the matrix and the filler.     

Carbon nanotubes based high temperature vulcanized silicone rubber nanocomposite with excellent elasticity and electrical properties

In the present study, we have fabricated a series of high temperature vulcanized silicone rubber (HTVSR)/carbon nanotubes (CNTs) nanocomposites with different CNT contents. The CNTs were pretreated by the chitosan salt before being incorporated into the HTVSR. The nanocomposites were then characterized in terms of morphological, thermal, mechanical and electrical properties. It was found that the chitosan salt pretreated CNTs dispersed uniformly within the HTVSR matrix, improving the thermal and mechanical properties of the HTVSR. The nanocomposites could remain conductive without losing inherent properties after 100 times of repeated stretching/release cycles by 100%, 200%, and even 300%. Moreover, the nanocomposites had good response to the compressed pressures. The results obtained from this study indicate that the fabricated nanocomposites are potential to be used in many electrical fields such as the conductive elastomer or the pressure sensor.     

Tribological behaviour and wear of carbon nanotubes grafted on carbon fibres

Carbon nanotubes (CNTs) grafted on fibres are widely used to reinforce composites in order to improve their mechanical properties. This study concerned the tribological properties of CNTs grafted on carbon fibres by the flame method. The aim of this study was to determine whether CNTs on fibres suffer damage under stress, similar to those applied during composite manufacturing, which can damage composite properties, particularly fibre/matrix adhesion. For this purpose, reciprocating friction tests were performed to examine the resistance of CNTs and highlight a wear mechanism. The results showed that the presence of CNTs increased the coefficient of friction in the first friction cycles and then decreased it to close to the COF of the fibre without CNTs. The wear mechanism showed that after a small number of friction cycles, the CNTs were flattened out and formed a transfer film.     

碳纳米管表面处理及其在铜基复合材料中的应用

碳纳米管因特殊结构带来的优异性能而被海内外学者广泛关注,以碳纳米管为增强相制备铜基复合材料是使铜基导体同时具有高强度和高导电性能的有效途径。然而,由于碳纳米管表面能高、表面反应活性低,碳纳米管/铜复合材料制备的过程中存在增强体分散性差和界面结合强度弱两大问题,从而阻碍了复合材料高性能的实现。在碳纳米管/铜复合材料的制备过程中,采用适当的方法对碳纳米管进行表面处理能改变碳纳米管的表面结构和反应活性,在改善碳纳米管的分散性的同时增强碳纳米管与铜基体的界面结合,从而提高碳纳米管的增强效率,保证复合材料良好的综合性能。然而,表面处理过程可能会破坏碳纳米管的结构完整性,影响碳纳米管的本征性能,进而影响其增强效果,或可能在基体中引入其他杂质,影响复合材料的导电和导热性能。因此,在进行表面处理时应综合考虑其对碳纳米管结构性能及复合材料增强作用的影响。近年来,研究者们通过优化碳纳米管表面处理工艺突破了碳纳米管/铜复合材料在制备过程的难点,在保证铜基体优异的导电、导热性能的同时,大幅提高了碳纳米管/铜复合材料的力学性能。碳纳米管表面处理工艺类型大致可分为机械球磨、化学表面改性、表面镀层和联合表面处理四类。传统的机械球磨表面处理对碳纳米管的结构破坏较大;化学表面改性又分为共价表面改性和非共价表面改性,非共价表面改性在保持碳纳米管完整的管状结构和优异性能的同时,提高了碳纳米管在溶液中的分散性,但用于复合材料制备时会给基体引入有机杂质,影响复合材料性能;共价表面改性和表面镀层是铜基复合材料制备过程中最为常用和有效的表面处理方法,其能够在提高碳纳米管在基体中的分散性能的同时改善碳纳米管表面的反应活性,从而形成碳纳米管和铜基体之间强度较高的反应结合界面,实现碳纳米管/铜复合材料高强高导的综合性能。此外,可通过综合利用各种表面处理方法,结合各表面处理工艺的优势,获得更为优异的改性效果。本文从碳纳米管表面处理工艺的基本类型以及碳纳米管表面处理对铜基复合材料结构和性能的影响两方面阐述了碳纳米管表面处理在铜基复合材料中的应用和研究进展,并对其未来的研究方向进行了展望。     

Development of sizing-free multi-functional carbon fibre nanocomposites

High quality multi-walled carbon nanotubes (CNTs) grown at high density using a low temperature growth method are used as an alternative material to polymer sizing and is utilised in a series of epoxy composites reinforced with carbon fibres to provide improved physical and electrical properties. We report improvements for sizing-sensitive mechanical and physical properties, such as the interfacial adhesion, shear properties and handling of the fibres, whilst retaining resin-infusion capability. Following fibre volume fraction normalisation, the carbon nanotube-modified carbon fibre composite offers improvements of 146% increase in Young’s modulus; 20% increase in ultimate shear stress; 74% increase in shear chord modulus and an 83% improvement in the initial fracture toughness. The addition of CNTs imparts electrical functionalisation to the composite, enhancements in the surface direction are 400%, demonstrating a suitable route to sizing-free composites with enhanced mechanical and electrical functionality.     

Mechanical behavior of self-assembled carbon nanotube reinforced nylon 6,6 fibers

The versatile electrospinning technique was used to successfully align and disperse multiwalled carbon nanotubes (MWCNT) in nylon 6,6 matrix to obtain composite fibers. The morphology of the composite fibers and the dispersion of the CNTs within the fibers were analyzed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. TEM analysis revealed that the CNTs were well-dispersed, separated and aligned along the fiber axis. The thermal and mechanical properties of the composite fibers were characterized as a function of weight fraction of the CNTs. Incorporation of the CNTs in the fibers resulted in an increase in glass-transition temperature (T_g) by ∼7 °C, indicating that the addition of CNTs has restricted the mobility of the polymer chains and provided confinement to neighboring molecular chains. Tensile and nanoindentation experiments were performed to investigate the mechanical deformation behavior of the composite fibers. The results suggested that incorporation of high strength and high aspect ratio CNTs into the fiber matrix enhanced significantly the stiffness and strength of nylon 6,6 fibers. An understanding of the structure–property relationships can provide fruitful insights to develop electrospun fibers with superior properties for miniaturized and load-bearing applications.     

Mechanical reinforcement while remaining electrical insulation of glass fibre/polymer composites using core–shell CNT@SiO2 hybrids as fillers

Carbon nanotubes (CNTs) have been widely used as mechanical reinforcement agents of composites. However, their aggregations, weak interfacial interaction with polymer, as well as high electrical conductivity limit their use in some especial applications. In this paper, the silicon oxide (SiO₂)-coated (CNT@SiO₂) core–shell hybrids with different SiO₂ thickness were prepared and employed to reinforce glass fibre-reinforced bismaleimide–triazine (BT) resin (GFRBT) composites. The results indicated the mechanical properties, including tensile strength and Young’s modulus increased with the increase of SiO₂ thickness and CNT@SiO₂ loading. Such enhanced mechanical properties were mainly attributed to the intrinsically nature of CNTs, homogeneous dispersion of the hybrids, as well as improved interfacial interaction. Meanwhile, the composites remained high electrical insulation (9.63 × 10¹² Ω cm) due to the existence of SiO₂ layer on CNT surface. This study will guide the design of functionalized CNTs and the construction of high-performance composites.     

Biomolecular Tuning of Electronic Transport Properties of Carbon Nanotubes via Antibody Functionalization

Carbon nanotubes (CNTs) are remarkable solid-state nanomaterials due to their unique electrical and mechanical properties. The electronic properties of nanotubes combined with biological molecules such as proteins could make miniature devices for biological sensing applications. In this paper, the noncovalent interaction of single-wall CNTs with antibodies is presented for its potential applications for detecting overexpressed cell surface receptors in breast cancer cells. The degree of binding of antibodies on CNTs was found to be more than 80% for an extended sampling area by confocal microscopy. The key to achieve such high degree of functionalization is due to the separation of CNTs using surfactants that leads to a high surface area to volume ratio and higher number of active sites for charge transfer that enhance binding. This paper also presents tuning of electronic transport properties of CNTs by monoclonal antibodies that are specific to insulin-like growth factor 1 receptor in breast cancer     

碳纳米管增强聚合物复合材料力学性能及摩擦磨损性能研究进展

本文主要就近几年来碳纳米管、增强聚合物复合材料制备及其力学性能、摩擦磨损性能影响方面研究进展,作一简要介绍.