Achieving single domain in rhombohedral and tetragonal Mn-doped Pb(In1/2Nb1/2)-Pb(Mg1/3Nb2/3)-PbTiO3 crystals for infrared detecting applications

The [111]-oriented rhombohedral Mn-doped 0.15Pb(In_1/2Nb_1/2)-0.55Pb(Mg_1/3Nb_2/3)O₃-0.30PbTiO₃ (Mn:PIMNT(15/55/30)) crystal and the [001]-oriented tetragonal Mn-doped 0.29Pb(In_1/2Nb_1/2)-0.29Pb(Mg_1/3Nb_2/3)O₃-0.42PbTiO₃ (Mn:PIMNT(29/29/42)) crystal were poled under different conditions. The pyroelectric performance of the two crystals as a function of poling temperature, as well as the relationship with ferroelectric domain configuration and phase structure was investigated systematically. The pyroelectric properties of the two crystals enhance with rising the poling temperature, which can be attributed to the improvement of the single state. And for the rhombohedral Mn:PIMNT(15/55/30) crystal locating near morphotropic phase boundary (MPB), the increase of tetragonal phase induces the deterioration of pyroelectric properties. Due to more residual tetragonal phase, the pyroelectric coefficient of the Mn:PIMNT(15/55/30) crystal poled at 150°C is lower than that poled at 100°C. In general, both the crystals poled above T_C achieve nearly single state, exhibiting the best pyroelectric properties with relatively high Curie temperature (T_C), where P = 9.71 × 10⁻⁴ C m⁻² K⁻¹, F_i = 3.88 × 10⁻¹⁰ m V⁻¹, F_v = 0.068 m² C⁻¹ and F_d = 29.7 × 10⁻⁵ Pa^−1/2 for the rhombohedral Mn:PIMNT(15/55/30) crystal (T_C = 171°C) and P = 6.78 × 10⁻⁴ C m⁻² K⁻¹, F_i = 2.71 ×10⁻¹⁰ mV⁻¹, F_v = 0.1 m² C⁻¹, F_d = 23.54 × 10⁻⁵ Pa^−1/2 for the tetragonal Mn:PIMNT(29/29/42) single crystal (T_C = 251°C), meeting the stable operation of infrared detector at relatively high environmental temperatures.     

Enhanced pyroelectric performance in potassium sodium niobate-based ceramics via multisymmetries coexistence design

Achieving excellent pyroelectric performance remains a challenge for lead-free piezoelectric ceramics. To meet the requirements of both an enhanced pyroelectric coefficient at room temperature and good thermal stability during the encapsulation of pyroelectric devices, (1–x)K_0.48Na_0.52NbO₃–xBi_0.5Ag_0.5ZrO₃–0.2%Fe₂O₃ (KNN–BAZ–Fe) lead-free ferroelectric ceramics with high Curie temperatures were prepared to obtain improved pyroelectric performance via the coexistence of multiple symmetries. The variation of BAZ content led to the formation of rhombohedral–orthorhombic–tetragonal phase boundary and promoted grain growth, resulting in the best pyroelectric coefficient (p = 5.09 × 10⁻⁴ C m⁻²°C⁻¹) and enhanced figures of merit (F_i = 0.2084 × 10⁻⁹ (m V⁻¹), F_v = 0.0142 m² C⁻¹, F_d = 0.0947 × 10⁻⁴ Pa^−1/2, and F_e = 17.66 J m⁻³ K⁻²) for infrared (IR) detection when x = 0.05. The room-temperature pyroelectric coefficient obtained in this study is approximately four times that of the pure KNN ceramic and is the maximum value reported for niobate-based piezoelectric ceramics. Moreover, compared with the poor thermal stability of barium titanate- and bismuth sodium titanate-based ceramics because of their ultralow Curie temperature or thermal depolarization temperature, the ceramics investigated here exhibit much better thermal stability because of their high Curie temperature (T_C > 300°C) and diffused phase-transition behavior, making them more adaptable for practical applications. These results suggest that KNN–xBAZ–Fe ceramics are attractive candidates for applications in the field of IR sensors.     

Significantly enhanced pyroelectric performance in novel sodium niobate-based lead-free ceramics by compositional tuning

In this study, (1 − x)NaNbO₃–xBa_0.6(Bi_0.5K_0.5)_0.4TiO₃ (abbreviated as NN-xBBKT, x = 0.05, 0.10, 0.15, and 0.20) lead-free pyroelectric ceramics were synthesized by conventional solid-state reaction method. Moreover, their microstructure, phase structure, dielectric, ferroelectric, piezoelectric, and pyroelectric characteristics were studied systematically. The X-ray diffraction result showed that the phase structure of NN-xBBKT ceramics changed from orthorhombic to tetragonal and finally became pseudocubic symmetry. The ferroelectric-paraelectric phase transition temperature and depolarization temperature shifted to lower temperature with the increase in BBKT content. Furthermore, with increasing BBKT content, piezoelectric coefficient, figures of merit, and pyroelectric coefficient first increased and then decreased. The optimum pyroelectric properties (eg F_d = 0.81 × 10⁻⁵ Pa^−1/2, F_v = 1.02 × 10⁻² m² C⁻¹, F_i = 1.04 × 10⁻¹⁰ m V⁻¹, and p = 3.11 × 10⁻⁸ C cm⁻² K⁻¹) were observed in sample composition with x = 0.15. More importantly, the pyroelectric coefficient of ceramic with x = 0.15 also displayed relatively high thermal stability because of high depolarization temperature (~110°C). These parameters demonstrate that the novel Pb-free NaNbO₃-based ceramics form an important class of pyroelectric material with broad range of application prospect.     

High pyroelectric performance in Pb0.99Nb0.02[(Zr0.57Sn0.43)0.94Ti0.06]0.98O3/Al2O3 composites by design

High pyroelectric performance around human body temperature is essential for ultra-sensitive infrared detectors of medical systems. Herein, toward human health monitoring, composite ceramics (1-x)Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_0.94Ti_0.06]_0.98O₃/xAl₂O₃ (x = 0, 0.1, and 0.2) were designed. A metastable ferroelectric (FE) phase was induced in the anti-FE matrix by the Al₂O₃ component-induced internal stress, and in turn FE-anti-FE phase boundary was constructed. The ceramics at x = 0.2 exhibit high pyroelectric coefficient with p = 10.9 × 10⁻⁴ C·m⁻²·K⁻¹ and figures of merit with current responsivity F_i = 6.23 × 10⁻¹⁰ m·V⁻¹, voltage responsivity F_v = 12.71 × 10⁻² m²·C⁻¹, and detectivity F_d = 7.03 × 10⁻⁵ Pa^−1/2 around human body temperature. Moreover, the enhanced pyroelectric coefficients exist in a broad operation temperature range with a large full width at half maximums of 18.5°C and peak value of 29.2 × 10⁻⁴ C·m⁻²·K⁻¹ at 48.2°C. The designed composite ceramic is a promising candidate for infrared thermal imaging technology of noncontact human health monitoring system.     

High pyroelectric response in Pb0.99Nb0.02[(Zr0.57Sn0.43)1−xTix]0.98O3 ceramics

Both high pyroelectric coefficient and figure of merits of ferroelectric materials are desirable for infrared detection. In this work, we prepared Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_1−xTi_x]_0.98O₃ (0.060 ≤ x ≤ 0.080) ceramics, and the microstructure and electric properties were studied systematically. It is observed that the composition x = 0.07 shows enhanced pyroelectric properties around ambient temperature due to the ferroelectric–antiferroelectric phase transition, with the pyroelectric coefficient p = 6.83 × 10⁻⁴ C m⁻² K⁻¹ and the figures of merit F_i = 5.04 × 10⁻¹⁰ m V⁻¹, F_v = 7.61 × 10⁻² m² C⁻¹, and F_d = 3.46 × 10⁻⁵ Pa^−1/2 at room temperature and the highest pyroelectric coefficient of 695.5 × 10⁻⁴ C m⁻² K⁻¹ and F_i = 1410.46 × 10⁻¹⁰ m V⁻¹, F_v = 1587.39 × 10⁻² m² C⁻¹, and F_d = 1182.94 × 10⁻⁵ Pa^−1/2 at 36.7°C. These values are superior to other pyroelectric materials. These results indicate that this system is a promising pyroelectric material for the applications of infrared detectors.     

Electrocaloric effect and pyroelectric performance in (K,Na)NbO3-based lead-free ceramics

The issue of how to achieve an electrocaloric effect (ECE) and pyroelectric effect in a material simultaneously remains to be a challenge for developing practical solid-state cooling devices and RF-detectors. Here, we structure a polymorphic phase transition (PPT) region by doping modification in KNN-based ceramics, which are developed to achieve the ECE. The direct measured ECE and pyroelectric properties are investigated in lead-free (1-x)K_0.5Na_0.5NbO₃-xBi_0.5Na_0.5ZrO₃ (KNN-xBNZ) ceramics. The adiabatic temperature change (∆T) of 0.22 K at 100°C, 0.14 K at 70°C and 0.16 K at 30°C can be obtained under an electric field of 35 kV cm^–1 for x = 0.03, 0.04 and 0.05, respectively. In addition, the temperature dependence of pyroelectric coefficient (p) is established for all compositions via the Byer-Roundy method. A large p of 454.46 × 10^–4 C m^–2 K^–1 is detected at Curie temperature (T_C) in the ceramics with x = 0.03. Achieving electrocaloric effect and pyroelectric performance simultaneously may shed light and provide a feasible design scheme for developing practically useful electrocaloric and pyroelectric materials.     

Large pyroelectricity via engineered ferroelectric-relaxor phase boundary

With growing demand for high-sensitivity infrared detectors in industrial temperature monitoring and medical systems, high-performance pyroelectric materials are vitally required. In this work, large pyroelectric performance is achieved in (1 − x)Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_0.937Ti_0.063]_0.98O₃–xBaTiO₃ (1 − x)PNZST–xBT ceramics by tuning the ferroelectric (FE)-relaxor phase boundary near room temperature. The FE- and ergodic-relaxor phase boundaries are engineered by breaking the long-range antiferroelectric order with the introduction of BaTiO₃. It is found that the ceramics with x = 0.15 exhibit a large pyroelectric coefficient of 11.3 × 10^–4 C m^–2 K^–1 and figures of merit of F_i = 20.1 × 10^–10 m V^–1, F_v = 3.44 × 10^–2 m² C^–1, and F_d = 3.87 × 10^–5 Pa^–1/2 around room temperature due to engineered phase boundary. Our results provide the potential technological application for ultrasensitive infrared detector and scientific insights into pyroelectric ceramic design.     

Enhancement of pyroelectric properties of lead-free 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics by La doping

Lead-free 0.94NBT-0.06BT-xLa ceramics at x = 0.0–1.0 (%) were synthesized by a conventional solid-state route. XRD shows that the compositions are at a morphotropic phase boundary where rhombohedral and tetragonal phases coexist. With increasing La³⁺ content pyroelectric coefficient (p) and figures of merits greatly increase; however, the depolarization temperature (T_d) decreases. p is 7.24 × 10⁻⁴C m⁻² °C⁻¹ at RT at x = 0.5% and 105.4 × 10⁻⁴C.m^−2 °C⁻¹ at T_d at x = 0.2%. F_i and F_v show improvements at RT from 1.12 (x = 0%) to 2.65 (x10 ⁻¹⁰ m v⁻¹) (x = 0.5%) and from 0.021 to 0.048 (m².C⁻¹) respectively. F_i and F_v show a huge increase to 37.6 × 10⁻¹⁰ m v⁻¹ and 0.56 m² C⁻¹ respectively at T_d at x = 0.2%. F_C shows values of 2.10, 2.89, and 2.98 (x10⁻⁹C cm⁻² °C⁻¹) at RT at 33, 100 and 1000 (Hz) respectively. Giant pyroelectric properties make NBT-0.06BT-xLa at x = 0.2% and 0.5% promising materials for many pyroelectric applications.     

Investigations on the polymorphism of K4CaSi6O15 at elevated temperatures

In the present study, single crystals and polycrystalline material of K₄CaSi₆O₁₅ were prepared from solid-state reactions between stoichiometric mixtures of the corresponding oxides/carbonates. Heat capacity (C_p) measurements above room temperature using a differential scanning calorimeter indicated that two thermal effects occurred at approximately T₁ = 462 K and T₂ = 667 K, indicating the presence of structural phase transitions. The standard third-law entropy of K₄CaSi₆O₁₅ was determined from low-temperature C_p’s measured by relaxation calorimetry using a Physical Properties Measurement System and amounts to S°(298K) = 524.3 ± 3.7 J·mol⁻¹·K⁻¹. For the 1^st transition, the enthalpy change ΔH^tr1 = 1.48 kJ·mol and the entropy change ΔS^tr1 = 3.25 J·mol⁻¹·K⁻¹, whereas ΔH^tr2 = 3.33 kJ·mol⁻¹ and ΔS^tr2 = 5.23 J·mol⁻¹·K⁻¹ were determined for the 2^nd transition. The compound was further characterized by in-situ single-crystal X-ray diffraction between ambient temperature and 1063 K. At 773 K, the high-temperature phase stable above T₂ has the following basic crystallographic data: monoclinic symmetry, space group P2₁/c, a = 6.9469(4) Å, b = 9.2340(5) Å, c = 12.2954(6) Å, β = 93.639(3)°, V = 787.13(7) ų, Z = 2. It belongs to the group of interrupted framework silicates and is based on tertiary (Q³-type) [SiO₄]-tetrahedra. Together with the octahedrally coordinated Ca-cations, a three-dimensional mixed polyhedral network structure is formed, in which the remaining K-ions provide charge balance by occupying voids within the net. The intermediate temperature modification stable between T₁ and T₂ shows a (3+2)-dimensional incommensurately modulated structure that is characterized by the following q-vectors: q₁ = (0.057, 0.172, 0.379), q₂ = (-0.057, 0.172, -0.379). The crystal structures of the high- and the previously studied ambient temperature polymorph (space group Pc) are topologically equivalent and show a group-subgroup relationship. The index of the low- in the high-symmetry group is six and involves both, losses in translation as well as point group symmetry. The distortion is based on shifts of the different atom species and tilts of the 4- and 6-fold coordination polyhedra. Actually, for some of the oxygen atoms, the displacements exceed 0.5 Å. A more detailed analysis of the distortions relating to both structures has been performed using mode analysis, which revealed that the primary distortion mode transforms according to the Λ₁ irreducible representation of P2₁/c. However, other modes with smaller distortion amplitudes are also involved.     

The decrease of depolarization temperature and the improvement of pyroelectric properties by doping Ta in lead-free 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics

Ta-doped lead-free 0.94NBT-0.06BT-xTa (x=0.0–1.0%) ceramics were synthesized by a conventional solid-state route. XRD shows that the compositions are at a morphotropic phase boundary where rhombohedral and tetragonal phases coexist. The depolarization temperature (T_d) shifted to lower temperature with the increase of Ta content. The pyroelectric coefficient (p) of doped ceramics greatly enhanced compared with undoped material and reached a maximum of 7.14×10⁻⁴ C m⁻² °C⁻¹ at room temperature (RT) and 146.1×10⁻⁴ C m⁻² °C⁻¹ at T_d at x=0.2%. The figure of merits, F_i and F_v, also showed a great improvement from 1.12×10⁻¹⁰ m v⁻¹ and 0.021 m² C⁻¹ at x=0.0 to 2.55×10⁻¹⁰ m v⁻¹ and 0.033 m² C⁻¹ at x=0.2% at RT. Furthermore, F_i and F_v show the huge improvement to 52.2×10⁻¹⁰ m v⁻¹ and 0.48×10⁻¹⁰ m v⁻¹ respectively at T_d at x=0.2%. F_C shows a value between 2.26 and 2.42 ×10⁻⁹ C cm⁻² °C⁻¹ at RT at x=0.2%. The improved pyroelectric properties make NBT-0.06BT-0.002Ta ceramics a promising infrared detector material.     

Enhanced pyroelectric properties in (Bi0.5Na0.5)TiO3–BiAlO3–NaNbO3 ternary system lead‐free ceramics

High pyroelectric performance and good thermal stability of pyroelectric materials are desirable for the application of infrared thermal detectors. In this work, enhanced pyroelectric properties were achieved in a new ternary (1?x)(0.98(Bi_0.5Na_0.5)(Ti_0.995Mn_0.005)O₃–0.02BiAlO₃)–xNaNbO₃ (BNT–BA–xNN) lead‐free ceramics. The effect of NN addition on the microstructure, phase transition, ferroelectric, and pyroelectric properties of BNT–BA–xNN ceramics were investigated. It was found that the average grain size decreased as x increased to 0.03, whereas increased with further NN addition. The pyroelectric coefficient p at room temperature (RT) was significantly increased from 3.87 × 10^?8Ccm^?2K^?1 at x = 0 to 8.45 × 10^?8Ccm^?2K^?1 at x = 0.03. The figures of merit (FOMs), F_i, F_v and F_d, were also enhanced with addition of NN. Because of high p (7.48 × 10^?8Ccm^?2K^?1) as well as relatively low dielectric permittivity (~370) and low dielectric loss (~0.011), the optimal FOMs at RT were obtained at x = 0.02 with F_i = 2.66 × 10^?10 m/V, F_v = 8.07 × 10^?2 m²/C, and F_d = 4.22 × 10^?5 Pa^?1/2, which are superior to other reported lead‐free ceramics. Furthermore, the compositions with x ≤ 0.03 exhibited excellent temperature stability in a wide temperature range from 20 to 80°C because of high depolarization temperature (≥110°C). Those results unveil the potential of BNT–BA–xNN ceramics for infrared detector applications.     

Phase diagram and properties of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 polycrystalline ceramics

yPb(In_1/2Nb_1/2)O₃-(1 − x − y)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ (yPIN-(1 − x − y)PMN-xPT) polycrystalline ceramics with morphotropic phase boundary (MPB) compositions were synthesized using columbite precursor method. X-ray diffraction results indicated that the MPB of PIN-PMN-PT was located around PT = 0.33-0.36, confirmed by their respective dielectric, piezoelectric and electromechanical properties. The optimum properties were found for the MPB composition 0.36PIN-0.30PMN-0.34PT, with dielectric permittivity ?_r of 2970, piezoelectric coefficient d₃₃ of 450 pC/N, planar electromechanical coupling k_p of 49%, remanent polarization P_r of 31.6 μC/cm² and T_C of 245 °C. According to the results of dielectric and pyroelectric measurements, the Curie temperature T_C and rhombohedral to tetragonal phase transition temperature T_R-T were obtained, and the “flat” MPB for PIN-PMN-PT was achieved, indicating that the strongly curved MPB in PMN-PT system was improved by adding PIN component, offering the possibility to grow single crystals with high electromechanical properties and expanded temperature usage range (limited by T_R-T).     

Negative thermal expansion coefficient of Sc-doped indium tungstate ceramics synthesized by co-precipitation

Co-precipitation was successfully applied to synthesize the Sc³⁺ doped In_2-xSc_x (WO₄)₃ (x = 0, 0.3, 0.6, 0.9 and 1.2) compounds. The composition- and temperature-induced structural phase transition and thermal expansion behaviors of Sc³⁺ doped In₂(WO₄)₃ were investigated. Results indicate that In_2-xSc_x (WO₄)₃ crystalizes in a monoclinic structure at 300 °C for x ≤ 0.3 and changes into hexagonal structure for x ≥ 0.6. Hexagonal In_1.1Sc_0.9(WO₄)₃ displays negative thermal expansion (NTE) with an average linear coefficient of thermal expansion (CTE) of −1.85 × 10⁻⁶ °C ⁻¹. After sintering at 700 °C and above, a phase transition from hexagonal to orthorhombic phase was observed in In_2-xSc_x (WO₄)₃ (x ≥ 0.6). Sc³⁺ doping successfully reduce the temperature-induced phase transition temperature of In_2-xSc_x (WO₄)₃ ceramics from 250 °C (x = 0) to room temperature (x = 0.9). When x = 0.9 and 1.2, the average linear CTEs of In_2-xSc_x (WO₄)₃ ceramics are −5.45 × 10⁻⁶ °C⁻¹ and -4.43 × 10⁻⁶ °C⁻¹ in a wider temperature range of 25–700 °C, respectively.     

Pyroelectric energy harvesting using low–TC (1–x)(Ba0.7Ca0.3)TiO3–xBa(Zr0.2Ti0.8)O3 bulk ceramics

Lead‐free ferroelectric ceramics (1–x)(Ba_0.7Ca_0.3)TiO₃–xBa(Zr_0.2Ti_0.8)O₃ (BCTZ100x) with x = 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, and 0.80 were evaluated for their pyroelectric energy harvesting performance, using the Olsen cycle. As the composition ratio x increased, the crystal phase changed to tetragonal, orthorhombic, rhombohedral, and cubic; the phase boundaries crossed each other in the vicinity of BCTZ70. The crossover phase transition behavior between first‐order and diffuse phase transition changed to only the diffusion phase transition with increasing x. A pinching effect occurred because an increase in dielectric constant was also observed. Energy densities N_D of 229 mJ/cm³ and 256 mJ/cm³ for BCTZ50 and BCTZ80 were obtained, respectively, in temperature of 30°C‐100°C and an electric field of 0‐30 kV/cm. These N_D values are over two times higher than that of soft–Pb(Ti,Zr)O₃ (PZT), which exhibits piezoelectric performance equivalent to BCTZ50 at room temperature. Compared with soft–PZT, BCTZ50 and BCTZ80 exhibited larger N_D values owing to their lower Curie temperatures (T_C ~ 50°C‐110°C). We conclude that low–T_C ferroelectrics are useful for pyroelectric energy conversion based on the Olsen cycle even if they are unsuitable for piezoelectric applications at high temperatures.     

Dynamic of polar nanoregions and its impact on the pyroelectric and dielectric properties in paraelectric KTN materials

The origin of the excellent properties of KTN-based materials around Curie temperature (T_C), which should be originated form the motion of polar nanoregions (PNRs), has attracted considerable research interest. In this paper, the relaxation of a KTa_0.63Nb_0.37O₃ single crystal is discussed with the temperature dependence of permittivity. Moreover, its pyroelectric effect above T_C is investigated. In detail, the pyroelectric coefficient decreases from ∼110.0 to ∼13.0 μC/(m² K), with the temperature increasing from 22 to 33°C, and finally reduces to 0 at 100°C with PNRs disappear. Moreover, the dynamic dielectric nonlinearity for the KTN single crystal is studied in the paraelectric phase. To investigate these mechanisms, the amplitude and phase angle of the first and third harmonics under various electric fields, frequencies, and temperatures are analyzed. As a result, the motions of PNRs induced by electric field, which is pinned and depinned by the defect, are presented to explain the nonlinear dielectric response observed in the paraelectric KTN single crystal.     

Enhanced pyroelectric properties of lead-free BNT-BA-KNN ceramics for thermal energy harvesting

In this work, (1−x)(0.98Bi_0.5Na_0.5TiO₃-0.02BiAlO₃)-x(Na_0.5K_0.5)NbO₃ (BNT-BA-xKNN) lead-free pyroelectric ceramics were prepared by a solid-state reaction method. The effect of Na_0.5K_0.5NbO₃ (KNN) content on microstructure, phase transition, and electrical properties of the BNT-BA-xKNN ceramics were systematically investigated. The results show that the appropriate content of KNN can induce the formation of the tetragonal structure, which results in the decreased ferroelectric-antiferroelectric phase transition temperature as a result of the break of long-range translational symmetry of BNT lattices. Therefore, the ferroelectric and pyroelectric properties of the BNT-BA-xKNN near room temperature are improved. The room-temperature pyroelectric coefficient significantly increases from 3.66 × 10⁻⁴ C/m²/K at x = 0 to 8.04 × 10⁻⁴ C/m²/K at x = 0.02, making a great contribution to the superior pyroelectric energy harvesting. The output energy density in one cycle of the BNT-BA-0.02KNN is 23.32 μJ/cm³, which is twice as high as that of the pristine samples. The enhancement of material properties suggests that the pyroelectric energy harvesting can be efficiently optimized by the adequate control of the phase structure.     

Grain growth anomaly and piezoelectric properties of liquid phase sintered high TC 0.36BiScO3 - 0.64PbTiO3 ceramics with sillenite Bi12PbO19

The sintering behavior of 0.36BiScO₃-0.64PbTiO₃ (0.36BS-0.64 PT) ceramics was studied to investigate the effect of grain growth by the sillenite Bi₁₂PbO₁₉ (BP) phase on their piezoelectric properties for application in high-temperature piezoelectric devices. The BP phase formed during calcination at temperatures <750 °C led to a grain growth anomaly of the 0.36BS-0.64 PT ceramics sintered at 1000 °C. This phase assisted the grain growth of the 0.36BS-0.64 PT ceramics by liquid phase sintering. In particular, the 0.36BS-0.64 PT ceramic calcined at 700 °C exhibited excellent piezoelectric properties with a d₃₃ of 531 pC/N, g₃₃ of 41×10⁻³ Vm/N, k_p of 61.8%, and Q_m of 16. In addition, the 0.36BS-0.64 PT ceramics exhibited ferroelectric relaxor-like characteristics with an extremely large relaxation coefficient (γ) of 1.94 along with high maximum dielectric permittivity temperature (426 °C).     

Phase structure analysis and pyroelectric energy harvesting performance of Ba(HfxTi1-x)O3 ceramics

Ba(Ti_1-xHf_x)O₃ ceramics were synthesized by a solid-state reaction process. The evolution of the phase structure was identified by XRD spectrum, dielectric spectroscopy, and temperature-dependent Raman spectroscopy for the Ba(Ti_1-xHf_x)O₃ ceramics. In addition, pyroelectric energy harvesting properties based on the Olsen cycle were investigated for the first time. A maximum pyroelectric energy harvesting density value of N_D = 491.30 kJ/m³ (ΔT = 120°C, E_H = 50 kV/cm) was achieved in the Ba(Hf_0.05Ti_0.95)O₃ ceramic. Compared with those of BT, the values of N_D more than doubled in the temperature range from ΔT = 60°C to ΔT = 100°C in the Ba(Hf_0.05Ti_0.95)O₃ ceramic and even increased 3.2 times at ΔT = 80°C near the Curie temperature (T_C) of the Ba(Hf_0.05Ti_0.95)O₃ sample. In addition, a larger pyroelectric energy harvesting density value of N_D = 367.10 kJ/m³ (ΔT = 120°C, E_H = 50 kV/cm) was acquired in the Ba(Hf_0.12Ti_0.88)O₃ ceramic. Values of N_D-BHT5/N_D-BT and N_D-BHT12/N_D-BT were analyzed in the Ba(Ti_1-xHf_x)O₃ ceramics. The optimal pyroelectric properties can be obtained in the vicinity of the ferroelectric to paraelectric phase-transition region.     

Structure and properties of Bi(Zn½Ti½)O3-modified Pb(Zr,Ti)O3 piezo-/ferroelectric ceramics around the ternary morphotropic phase boundary

To develop high-performance piezo-/ferroelectric materials, Bi(Zn_½Ti_½)O₃–PbZrO₃–PbTiO₃ (BZT–PZ–PT) ternary solid solution with compositions around the morphotropic phase boundary (MPB) is synthesized by solid-state reaction. The crystal structure and electric properties are investigated systematically by X-ray powder diffraction (XRD), dielectric spectroscopy, and ferroelectric and piezoelectric measurements. On the basis of the results of the XRD, dielectric and ferroelectric measurements, the pseudo-binary phase diagram of the yBi(Zn_½Ti_½)O₃–(1 − y)[(1 − x)PbZrO₃–xPbTiO₃] system has been constructed for three series, namely, y = 0.05, 0.10, and 0.15. It is found that the introduction of BZT into the PZT system makes the paraelectric to ferroelectric phase transition more diffuse, brings the MPB to a lower PT content, and enlarges the MPB region. The best properties with an improved dielectric constant ε' = 1248, and a large remnant polarization P_r = 33 μC/cm², as well as a relatively high T_C = 286°C, and a high coercive field E_c = 23 kV/cm was achieved in the y = 0.15 series with MPB composition x = 0.425, making it a promising material for high-power piezoelectric applications.     

Growth and electrical properties of high-Curie point rhombohedral Mn-Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 thin films

High-quality ternary relaxor ferroelectric (100)-oriented Mn-doped 0.36Pb(In_1/2Nb_1/2)O₃-0.36Pb(Mg_1/3Nb_2/3)O₃-0.28PbTiO₃ (Mn-PIMNT) thin films were grown on SrRuO₃-buffered SrTiO₃ single-crystal substrate in a wide deposition temperature range of 550-620°C using the pulsed laser deposition method. The phase structure, ferroelectric, dielectric, piezoelectric properties, and nanoscale domain evolution were studied. Under the deposition temperature of 620°C, the ferroelectric hysteresis loops and current-voltage curves showed that the film owned significantly enhanced remnant ferroelectric polarization of 34.5 μC/cm² and low leakage current density of 2.7 × 10⁻¹⁰ A/cm². Moreover fingerprint-type nanosized domain patterns with polydomain structures and well-defined macroscopic piezoelectric properties with a high normalized strain constant of 40 pm/V was obtained. Under in situ DC electric field, the domain evolution was investigated and 180° domain reversal was observed through piezoelectric force microscope. These global electrical properties make the current Mn-PIMNT thin films very promising in piezoelectric MEMS applications.