Electrocaloric behavior and piezoelectric effect in relaxor NaNbO3-based ceramics

We firstly reported the electrocaloric properties in relaxor (1−x−y)NaNbO₃–yBaTiO₃–xCaZrO₃ ceramics, and high electrocaloric effect (∆T ~0.451 K and∣∆T/∆E∣~0.282 Km/MV) can be realized in the ceramics (x = 0.04 and y = 0.10) under low temperature and low electric field. Relaxor behavior of NaNbO₃ ceramics can be found by doping both BaTiO₃ and CaZrO₃. In addition, optimized piezoelectric effects (d₃₃ ~235 pC/N and d₃₃* ~230 pm/V) can be observed in the ceramics (x = 0.04 and y = 0.10) due to the involved morphotropic phase boundary (MPB). Excellent piezoelectric effect (ie, d₃₃~330 pm/V at 41°C, and d₃₃*~332 pm/V at 60°C) can be found because of the characteristics of MPB. Good temperature reliability of piezoelectric effect can be shown because of both MPB and relaxor behavior. We believe that the ceramics with high electrocaloric effect and good piezoelectric effect can be considered as one of the most promising lead-free materials for piezoelectric devices.     

Modified Pb(Mg1/3Nb2/3)O3-PbZrO3–PbTiO3 ceramics with high piezoelectricity and temperature stability

There is a great demand to develop ferroelectric ceramics with both high piezoelectric coefficient and broad temperature usage range for emerging electromechanical applications. Herein, a series of Sm³⁺-doped 0.25Pb(Mg_1/3Nb_2/3)O₃-(0.75−x)PbZrO₃-xPbTiO₃ ceramics were fabricated by solid-state reaction method. The phase structure, dielectric and piezoelectric properties were investigated, where the optimum piezoelectric coefficient d₃₃ = 745 pC/N and electromechanical coupling factor k₃₃ = 0.79 were obtained at the morphotropic phase boundary composition x = 0.39, with good Curie temperature T_C of 242°C. Of particular importance is that high-temperature stability of the piezoelectric and field-induced strain was obtained over the temperature range up to 230°C for the tetragonal compositions of x = 0.40. The underlying mechanism responsible for the high piezoelectricity and temperature stability is the synergistic contribution of the MPB and local structural heterogeneity, providing a good paradigm for the design of high-performance piezoelectric materials to meet the challenge of piezoelectric applications at elevated temperature.     

Enhanced temperature stability in the O–T phase boundary of (K,Na)NbO3-based ceramics

In order to obtain excellent electrical properties and its temperature stability of KNN-based ceramics to meet the practical applications, a new lead-free material system of (1−x)K_0.5Na_0.5Nb_0.96Sb_0.04O₃-xBi_0.5Na_0.5Zr_0.8Sn_0.2O₃ (KNNS-xBNZS, 0 ≤ x ≤ 0.060) was designed, and the enhanced electrical properties (eg, d₃₃ ~ 465 pC/N, ε_r ~ 3318, S_uni ~ 0.133%) is obtained in the ceramics with x = 0.04. The physical origin of enhanced electric properties should be ascribed to the phase instability of R-T, resulting in a low-energy barrier, which can greatly facilitate the polarization switching. Moreover, the temperature stable of piezoelectric constant (d₃₃ or d₃₃*) is measured by three distinctive methods in different phase boundaries (O, O-T, R-T) at the temperature range 20°C-180°C, revealing that the O-T phase boundary has a relatively good temperature stability. A mode is used to show how to effectively modified the piezoelectric constant (d₃₃ or d₃₃*) and its temperature stability, we believe that such a strategy may further improve the temperature stability of d₃₃ or d₃₃* value in KNN-based ceramics.     

Piezoelectric properties of (Na0.5K0.5)(Nb1‐xSbx)O3‐SrTiO3 ceramics with tetragonal‐pseudocubic PPB structure

CuO‐added 0.96(Na_0.5K_0.5)(Nb_1‐xSb_x)O₃‐0.04SrTiO₃ ceramics sintered at the low temperature of 960°C for 10 hours showed dense microstructures and high relative densities. The specimens with 0.0 ≤  x ≤ 0.04 had orthorhombic‐tetragonal polymorphic phase boundary (PPB) structure. Tetragonal‐pseudocubic PPB structure was observed in specimens with 0.05 ≤  x ≤ 0.07, while the specimen with x = 0.08 has a pseudocubic structure. The structural variation in the specimens is explained by the decreases in the orthorhombic‐tetragonal transition temperature and Curie temperature with the addition of Sb⁵⁺ ions. The specimens with 0.05 ≤  x ≤ 0.07, which have tetragonal‐pseudocubic PPB structure, had large electric field‐induced strains of 0.14%‐0.016%. Moreover, these specimens also showed increased d₃₃ values between 280 pC/N and 358 pC/N. In particular, the specimen with x = 0.055 showed particularly enhanced piezoelectric properties: d₃₃ of 358 pC/N, k_p of 0.45, and the electric field‐induced strain of 0.16% at 4.5 kV/mm.     

Creating adjoining polymorphic phase transition (PPT) regions in ferroelectric (Ba,Sr)(Zr,Ti)O3 ceramics

In this work, we report the polymorphic phase transitions(PPT) in ferroelectric Ba_0.95Sr_0.05Zr_xTi_(1-x)O₃ (BSZT, x = 0.01–0.10) ceramics synthesized by using a solid-state reaction method. The doping elements and composition ratios were selected to create adjoining PPT phase boundaries near room temperature, hence to achieve a broadened peak of piezoelectric performance with respect to composition. The temperature-composition phase diagram was constructed and the effects of PPT on the electromechanical and ferroelectric properties of the ceramics were investigated. It was revealed that the two adjacent PPT regions at room temperature showed different characteristics in property enhancement. However, due to the proximity of the phase boundaries, Ba_0.95Sr_0.05Zr_xTi_(1-x)O₃ ceramics in a fairly broad range of compositions (0.02 ≤ x ≤ 0.07) showed excellent piezoelectric properties, including a large piezoelectric constant (312 pC/N ≤ d₃₃ ≤ 365 pC/N) and a high electromechanical coupling coefficient k_p (0.42 ≤ k_p ≤ 0.49).     

Structures and Properties of Pb(Zr0.5Ti0.5)O3−Pb(Zn1/3Nb2/3)O3− Pb(Ni1/3Nb2/3)O3 Ceramics for Energy Harvesting Devices

Piezoelectric ceramics with large energy density coefficient d₃₃·g₃₃ value have been found suitable for piezoelectric energy harvesting applications. In this study, the phase structures and piezoelectric properties of xPb(Zr_0.5Ti_0.5)O₃?yPb(Zn_1/3Nb_2/3)O₃?(1?x?y)Pb(Ni_1/3Nb_2/3)O₃ (xPZT?yPZN?(1?x?y)PNN) ceramic were investigated with systematically varying PZN and PNN components. The ternary phase diagram of PZT?PZN?PNN system was illustrated and the composition region of morphotropic phase boundary (MPB) was determined. Piezoelectric and dielectric measurements verify that the materials in MPB region all present large d₃₃ and d₃₃·g₃₃ values. In particular, very high d₃₃·g₃₃ coefficients of 20162.2 × 10^?15 m²/N and 21026.3 × 10^?15 m²/N are observed from samples 0.75PZT?0.15PZN?0.1PNN and 0.8PZT?0.05PZN?0.15PNN with compositions located on the rhombohedral phase side near MPB because the dielectric coefficient ε₃₃^T/ε₀ decreases faster than the d₃₃ coefficient at this side.     

High and temperature-insensitive piezoelectric performance in the lead-free Sm-doped BiFeO3–BaTiO3 ceramics with high Curie temperature

Large sensor piezoelectric constant (d₃₃ = 334 pC/N) and superior actuator piezoelectric constant (d₃₃* = 552 pm/V) as well as a high Curie temperature (T_C = 454 °C) were obtained simultaneously in the lead-free 0.67Bi_1.03FeO₃-0.33Ba_1-xSm_xTiO₃ ceramics. Such an excellent and temperature-insensitive piezoelectric performance with only 10% temperature variation of piezoelectric strain at the range of 25–125 °C is highly desirable for real applications. The structural origin of the enhanced piezoelectric performance is mainly attributed to the morphotropic phase boundary and the highest known tetragonality (c_T/a_T = 1.02) in such materials. Transmission electron microscopy and electro-mechanical phenomenological theory demonstrate that the superior d₃₃ and d₃₃* are associated with the hybrids nanodomains (60–90 nm) and flattened thermodynamic energy profile owing to the local structure heterogeneity. These results are superior as the piezoelectric properties are temperature-independent and the material has large d₃₃*, and high T_C compared to other lead-free piezoelectric ceramics.     

Crystal structure,microstructure and electrical properties of (1−x−y)Bi0.5Na0.5TiO3–xBi0.5K0.5TiO3–yBiFeO3 ceramics near MPB prepared via the combustion technique

(1?x?y)Bi_0.5Na_0.5TiO₃–xBi_0.5K_0.5TiO₃–yBiFeO₃ (BNKFT-x/y with 0.12≤x≤0.24, 0≤y≤0.07) lead-free piezoelectric ceramics have been prepared by the combustion technique. The effects of amounts of x and y on structures and electrical properties were examined. Powders and ceramics can be well calcined and sintered at 750 °C for 2 h and 1025–1050 °C, respectively. The results indicated that the crystalline structure and microstructure changed with the increase of x and y concentrations. XRD results of BNKFT-x/0.03 and BNKFT-0.18/y ceramics with 0.12≤x≤0.24 and 0≤y≤0.07 showed the rhombohedral–tetragonal morphotropic phase boundary (MPB). The addition of y caused a promoted grain growth while the addition of x suppressed the grain growth. The highest density (ρ=5.85 g/cm³), superior dielectric properties at T_c (ε_r=7846 and tan δ=0.02), remnant polarization measured at 40 kV/cm (P_r = 20.1 μC/cm²) and piezoelectric coefficient (d₃₃=213 pC/N) were obtained for x=0.18 and y=0.03.     

Large Piezoelectric Response and Polarization in Relaxor Ferroelectric PbTiO3–Bi(Ni1/2Zr1/2)O3

New binary system (1?x) PbTiO₃?xBi(Ni_1/2Zr_1/2)O₃ (PT–100x BNZ) with x ≤ 0.45 were synthesized via solid‐state reaction route. A morphotropic phase boundary (MPB) was identified around x = 0.40 by X‐ray diffraction (XRD) method. The ceramics with MPB composition exhibit enhanced ferroelectric properties. A large piezoelectric coefficient (d₃₃) up to 400 pC/N was obtained for the PT–40BNZ, which is comparable with the PbTiO₃–BiScO₃ (PT–BS, 450 pC/N).The frequency dependence of dielectric permittivity of PT–40BNZ shows characteristic of a strong relaxor feature and a transition temperature around 290°C (1 MHz). Temperature effect on the unipolar strain was also investigated. The present system with high d₃₃ is a competitive piezoelectric material, as no expensive oxide is used here compared with the PT–BS.     

Characterization of the High‐Temperature Ferroelectric (100−x−y)BiScO3–(x)Bi(Zr0.5Zn0.5)O3–(y)PbTiO3 Perovskite Ternary Solid Solution

Ternary compositions based on Bi(B′B″)O₃–PbTiO₃‐type compounds have been investigated for high‐temperature piezoelectric applications. Compositions in the ternary were chosen to be near the binary morphotropic phase boundary (MPB) composition of BiScO₃–PbTiO₃ (BS–PT). Ternary compositions in (100?x?y)BiScO₃–(x)Bi(Zr_0.5Zn_0.5)O₃–(y)PbTiO₃ [(100?x?y)BS–xBZZ–yPT] have been investigated with x ≤ 7.5. For compositions with x > 10, the Curie temperature (T_C) decreased below 400°C. Dielectric, piezoelectric, and electromechanical properties were characterized as a function of temperature, frequency, and electric field. Small additions of BZZ were shown to increase the electromechanical properties with only a small loss in T_C. The electromechanical properties were temperature stable up to the depoling temperature. The most promising composition exhibited a T_C of 430°C, piezoelectric coefficient (d₃₃) of 520 pC/N, and a planar coupling factor (k_p) of 0.45 that remained unchanged up to depoling temperature at 385°C.     

Systematic study of structure and piezoelectric properties of Pb(Ni1/3Nb2/3)O3-PbTiO3 by in situ synchrotron diffraction

Lead-based ferroelectric materials are extensively employed in industrial applications and everyday life due to their excellent ferroelectric and piezoelectric performance. Pb(Ni_1/3Nb_2/3)O₃-PbTiO₃ (PNN-PT) is a typical binary relaxor ferroelectric system, whose refined structure and piezoelectric properties have not been systematically investigated. In this study, evolution of electric field-based crystal structure and variation of ferroelectric, piezoelectric, as well as dielectric properties with composition and temperature of (1 − x)PNN-xPT (0.32 ≤ x ≤ 0.36) ceramics were studied in full detail. The optimal performance is obtained at 0.66PNN-0.34PT with maximum piezoelectric coefficient d₃₃ of 560 pC/N and large dielectric constant of 28 684. In situ high-energy synchrotron diffraction was employed to determine structural origins of enhanced properties of 0.66PNN-0.34PT. Interestingly, crystal structure of poled 0.66PNN-0.34PT ceramic is determined to be single monoclinic phase. Furthermore, both its lattice parameters and volume variation present butterfly shape under electric field. It is demonstrated that macroscopic strain of 0.66PNN-0.34PT stems mainly from intrinsic structure. The present study provides evidence for the relationship between microstructure and macroscopic properties, which is beneficial to the design of new materials with piezoelectric properties.     

The Composition and Temperature‐Dependent Structure Evolution and Large Strain Response in (1−x)(Bi0.5Na0.5)TiO3−xBa(Al0.5Ta0.5)O3 Ceramics

The (1?x) (Bi_0.5Na_0.5)TiO₃?xBa(Al_0.5Ta_0.5)O₃((1?x)BNT‐xBAT) lead‐free piezoceramics was fabricated using a conventional solid‐state reaction method. The temperature and composition‐dependent strain behavior, dielectric, ferroelectric (FE), piezoelectric, and pyroelectric properties have been systematically investigated to develop lead‐free piezoelectric materials with large strain response for actuator application. As the BAT content increased, the FE order is disrupted resulting in a degradation of the remanent polarization, coercive field, and the depolarization temperature (T_d). A large strain of 0.36% with normalized strain d₃₃* = 448pm/V was obtained for the optimum composition x = 0.045 at room temperature. The bipolar and unipolar strains for the compositions x = 0.035 and x = 0.04 reach almost identical maximum values when the temperature is in the vicinity of their respective depolarization temperature (T_d). The Raman‐spectra analysis, macroscopic properties, thermal depolarization results, and temperature‐dependent relationships of both polarization and strain demonstrated that the origin of the large strain response for this investigated system is attributed to a field‐induced relaxor to FE phase transformation.     

Enhanced Piezoelectric Properties of (Ba1−xCax)(Ti0.92Sn0.08)O3 Lead‐Free Ceramics

(Ba_1?xCa_x)(Ti_0.92Sn_0.08)O₃ (x = 0.00–0.06 mol) ceramics with a high relative density over 96% were prepared by a conventional sintering method at 1480°C. At room temperature, a polymorphic phase transition from orthorhombic phase to tetragonal phase was confirmed by the XRD patterns in the composition range of 0.04 ≤ x ≤ 0.06. A high piezoelectric coefficient d₃₃ up to 568 pC/N was obtained at x = 0.05 mol, which is higher than the other component of (Ba,Ca)(Ti,Sn)O₃ system. At the same time, the corresponding planar electromechanical coupling factor k_p, converse piezoelectric coefficient dS/dE, and dielectric constant ε_r reach 47.7%, 1013 pm/V, and 23000, respectively. These results indicate that the (Ba,Ca)(Ti,Sn)O₃ ceramics are a promising candidate to replace for the lead‐based piezoelectric materials.     

Orthorhombic‐pseudocubic phase transition and piezoelectric properties of (Na0.5K0.5)(Nb1−xSbx)‐SrZrO3 ceramics

0.96(Na_0.5K_0.5)(Nb_1?xSb_x)‐0.04SrZrO₃ ceramics with 0.0≤x≤0.06 were well sintered at 1060°C for 6 hours without a secondary phase. Orthorhombic‐tetragonal transition temperature (T_O‐T) and Curie temperature (T_C) decreased with the addition of Sb₂O₅. The decrease in T_C was considerable compared to that in T_O‐T, and thus the tetragonal phase zone disappeared when x exceeded 0.03. Therefore, a broad peak for orthorhombic‐pseudocubic transition as opposed to that for orthorhombic‐tetragonal transition appeared at 115°C‐78.2°C for specimens with 0.04≤x≤0.06. An orthorhombic structure was observed for specimens with x≤0.03. However, the polymorphic phase boundary structure containing orthorhombic and pseudocubic structures was formed for the specimens 0.04≤x≤0.06. Furthermore, a specimen with x=0.055 exhibited a large piezoelectric strain constant of 325 pC/N, indicating that the coexistence of orthorhombic and pseudocubic structures could improve the piezoelectric properties of (Na_0.5K_0.5)NbO₃‐based lead‐free piezoelectric ceramics.     

Room temperature constructing rhombohedral-tetragonal phase boundary in novel (Bi,Na)(Zr,Ti)O3 modified (K,Na)(Nb,Sb)O3 ceramics: Phase structure,defect and piezoelectric performance

Lead-free (1-x)(K_0.5Na_0.5)(Nb_0.96Sb_0.04)O₃-x(Bi_0.5Na_0.5)(Zr_0.8Ti_0.2)O₃ ceramics (abbreviated as (1-x)KNNS-xBNZT, x = 0, 0.01, 0.02, 0.03, 0.035 and 0.04) were synthesized by the solid-state method, and the dependence of phase evolution, microstructure, oxygen vacancy defect and electrical properties on compositions were carefully investigated. All ceramics had a pure perovskite structure and a dense microstructure. The phase transition temperatures (T_R-O and T_O-T) of the ceramics were adjusted by adding BNZT, and the rhombohedral-tetragonal (R-T) phase coexistence boundary was successfully constructed at room temperature when x = 0.03, the excellent piezoelectric performance (d₃₃ ～ 323 pC/N, k_p ～ 0.372) and high Curie temperature (T_C ～ 276 °C) have been achieved at this time. The grain size of the ceramics showed a strong difference on x content, and the maximum relative density value of 95.42% was obtained. The domain structure characterized by PFM confirmed that the ceramics possess small-sized nano-domains and complex domains at x = 0.03, which are the origin of enhanced piezoelectric properties. Moreover, the oxygen vacancy defect that can pin the domain walls was increased with the addition of (Bi_0.5Na_0.5)(Zr_0.8Ti_0.2)O₃. As a result, the doping with BNZT can significantly affect the phase structure and electrical properties of the ceramics, indicating that the (1-x)KNNS-xBNZT ceramics system with a R-T phase boundary is a promising lead-free piezoelectric material.     

Transition in temperature scaling behaviors and super temperature stable polarization in BiScO3–PbZrO3–PbTiO3 system

Temperature scaling of dynamic ferroelectric hysteresis for the morphotropic phase boundary (MPB) compositions in xBiScO₃–(1-x-y)PbZrO₃–yPbTiO₃ (xBS–(1-x-y)PZ–yPT, 0.018 ≤ x ≤ 0.264) ternary system was systematically investigated. The power-law relation was obtained for remanent polarization P_r and temperature T, that is, P_r ∝ T^β. It is interesting to find that the power-law exponent β could be modulated by BiScO₃ content x. With the increase of x from 0.018 to 0.264, β varies from −1.09398 to 2.44147. Transition of β from negative to positive produces in the vicinity of 0.054BS–0.476PZ–0.470PT ceramic. At this composition, the magnitude of β is very close to zero with value of only −0.01567, implying an almost temperature-independent polarization characteristic of the ceramic. Comparing with the conventional PZT-based piezoelectric ceramics that usually with negative exponent β, when x > 0.054, the xBS–(1-x-y)PZ–yPT ceramics show positive β value, so that the ferroelectric polarization is enhanced with increasing temperature. Such a positive temperature dependence of ferro-/piezoelectric property makes the ternary system a promising candidate for high-temperature applications.     

Pb(In1/2Nb1/2)O3-PbZrO3-PbTiO3 ternary ceramics with temperature-insensitive and superior piezoelectric property

The development of ferroelectric ceramics with both large piezoelectric responses and broad service temperature range is still a key challenge for practical applications due to the so-called d₃₃-T_C trade-off. Here we report the strategy to utilize the synergistic contribution of morphotropic phase boundary and enhanced local structural heterogeneity, in which an excellent piezoelectric coefficient d₃₃ of 680 pC/N and a high Curie temperature of 330 ℃ are simultaneously achieved in Sm modified 0.25PIN-0.325PZ-0.425PT ceramics. The underlying mechanism responsible for the high dielectric and piezoelectric properties is studied based on cryogenic dielectric measurement and Rayleigh analysis. Of particular interest is that, a high field-induced strain of 0.19% is achieved in 0.25PIN-0.32PZ-0.43PT at electric field of 20 kV/cm, corresponding to a piezoelectric d₃₃ * of 945 pm/V, showing an excellent temperature stability with minimal variation of 7% up to 310 °C. This work demonstrates the introduction of high temperature end members and rare earth doping are conducive to ferroelectric solid solutions with desired broad usage temperature range and superior piezoelectric properties, which will greatly benefit high temperature actuator applications.     

Crystallographic texture and phase structure induced excellent piezoelectric performance in KNN-based ceramics

It is difficult to maintain strong piezoelectric properties over a wide temperature range in (K,Na)NbO₃ (KNN)-based ceramics owing to the polymorphic phase boundary (PPB). Here, we propose advantageously utilizing the synergistic effect of crystal orientation and phase structure to address this issue. The 〈0 0 1〉_pc textured (1 − x)(K_0.48Na_0.52)(Nb_0.96Sb_0.04)O₃–x(Bi_0.5Ag_0.5)ZrO₃ (KNNS–xBAZ) ceramics with different phase structures were synthesized via the templated grain growth method. A high piezoelectric coefficient (d₃₃) of 505 ± 25 pC/N, an electric field-induced strain of 0.21%, and a superior temperature stability (d₃₃ exhibited a high retention of ≥78% at the temperature up to 200°C; strain maintained within 5.7% change over a temperature range of 30–150°C) were simultaneously achieved in textured KNNS–0.03BAZ ceramics. The flattened Gibbs free energy induced by the R–O–T multiphase coexistence, the strong anisotropy of crystals, and the abundant nanodomains contributed to the enhanced piezoelectric properties. The contribution of the strong anisotropy of crystals in 〈0 0 1〉_pc textured ceramics compensates for the deterioration of the piezoelectric properties caused by the phase structure deviation from the PPB with increasing temperature, which benefits the superior temperature stability of the textured KNNS–0.03BAZ ceramics. The previous merits prove that utilizing the synergistic effect of crystal orientation and phase structure is an effective strategy to boost the piezoelectricity and their temperature stability of KNN-based ceramics.     

Piezoelectric Property and Strain Behavior of Pb(Yb0.5Nb0.5)O3–PbHfO3–PbTiO3 Polycrystalline Ceramics

(1?x)Pb(Hf_1?yTi_y)O₃–xPb(Yb_0.5Nb_0.5)O₃ (x = 0.10–0.44, y = 0.55–0.80) ceramics were fabricated. The morphotropic phase boundary (MPB) of the ternary system was determined by X‐ray powder diffraction. The optimum dielectric and piezoelectric properties were achieved in 0.8Pb(Hf_0.4Ti_0.6)O₃–0.2Pb(Yb_0.5Nb_0.5)O₃ ceramics with MPB composition, where the dielectric permittivity ε_r, piezoelectric coefficient d₃₃, planar electromechanical coupling k_p, and Curie temperature T_c were found to be on the order of 1930,480 pC/N, 62%, and 360°C, respectively. The unipolar strain behavior was evaluated as a function of applied electric field up to 50 kV/cm to investigate the strain nonlinearity and domain wall motion under large drive field, where the high field piezoelectric d₃₃* was found to be 620 pm/V for 0.82Pb(Hf_0.4Ti_0.6)O₃–0.18Pb(Yb_0.5Nb_0.5)O₃. In addition, Rayleigh analysis was carried out to study the extrinsic contribution, where the value was found to be in the range 2%–18%.     

Effect of a lattice distortion strategy on the phase transition and properties in KNN-based ceramics

High performance lead-free piezoelectric ceramics are of great importance to the sustainable development of the environment. To obtain excellent comprehensive performance KNN-based lead-free piezoelectric ceramics, a lattice distortion strategy combined with domain configuration was designed in (1 − x)K_0.5Na_0.5Nb_0.95Sb_0.05O₃–xCaHfO₃ ((1 − x)KNNS–xCH) system by introduced Ca²⁺ into the A-site and Hf⁴⁺ into the B-site. The results demonstrated that the rhombohedral–orthorhombic–tetragonal polymorphic phase boundary (PPB) was constructed in 0.02 ≤ x ≤ 0.04 and significant lattice distortion occurred in R- and T-phase. Moreover, the 0.97KNNS–0.03CH sample exhibited excellent electrical performance (e.g., k_p ∼ 43.8%, d^*₃₃ ∼ 478.6 pm/V, and d₃₃ ∼ 392 pC/N) together with a high Curie temperature (T_C ∼ 295°C) profited from the PPB and domain configurations. The ceramics also showed the optimal thermal stability, which was beneficial to promote the development of KNN-based ceramics.