快淬纳米晶/非晶Mg2-xLaxNi (x=0～0.6)合金的贮氢动力学

为了改善Mg2Ni型合金气态及电化学贮氢动力学性能,用La部分替代合金中的Mg,用快淬技术制备了Mg2-xLaxNi(x=0,0.2,0.4,0.6)合金,用XRD,SEM,HRTEM分析了铸态及快淬态合金的微观结构;用自动控制的Sieverts设备测试了合金的气态贮氢动力学性能,用程控电池测试仪测试了合金的电化学贮氢动力学.结果发现,快淬无La合金具有典型的纳米晶结构,而快淬含La合金显示了以非晶相为主的结构,表明La替代Mg提高Mg2Ni型合金的非晶形成能力.La替代Mg明显地改变Mg2Ni型合金的相组成.当La替代量x=0.4时,合金的主相改变为(La,Mg) Ni3+ LaMg3.合金的气态及电化学吸放氢动力学对La含量及快淬工艺敏感,La替代使合金的吸氢动力学降低,但适量的La替代可以明显改善合金的放氢动力学及高倍率放电能力.适当的快淬处理可以提高合金的气态及电化学贮氢动力学,但获得最佳贮氢动力学的快淬工艺与合金的成分密切相关.     

Hydrogen storage thermodynamic and kinetic characteristics of PrMg12-type alloys synthesized by mechanical milling

To improve the hydrogen storage performance of PrMg_(12)-type alloys,Ni was adopted to replace partially Mg in the alloys. The PrMg_(11)Ni+x wt.% Ni( x = 100,200) alloys were prepared via mechanical m illing. The phase structures and m orphology of the experim ental alloys were investigated by X-ray diffraction and transm ission electron microscopy. The results show that increasing milling time and Ni content accelerate the form ation of nanocrystalline and am orphous structure. The gaseous hydrogen storage properties of the experim ental alloys were determ ined by differential scanning calorim etry( DSC) and Sievert apparatus. In addition,increasing milling time makes the hydrogenation rates of the alloys augment firstly and decline subsequently and the dehydrogenation rate always increases. The maximum capacity is 5. 572 wt. % for the x = 100 alloy and 5. 829 wt. % for the x = 200 alloy,respectively. The enthalpy change( ΔH),entropy change( ΔS) and the dehydrogenation activation energy( E_k~(de)) markedly lower with increasing the milling time and the Ni content due to the generation of nanocrystalline and amorphous structure.     

Structure and electrochemical hydrogen storage characteristics of Ce-Mg-Ni-based alloys synthesized by mechanical milling

The substituting Mg with Ni and milling as-cast alloy with Ni were adopted to obtain nanocrystalline/amorphous CeMgnNi+x wt.%Ni(x=100,200) alloys and promote the electrochemical hydrogen storage performances of CeMg_(12)-type alloys.Analyzing the structural features of the alloys provided a mechanism for ameliorating the electrochemical hydrogen storage properties.The electrochemical tests demonstrated that all the alloys just needed one cycle to be activated.Rising Ni proportion had an obvious role on charge-discharge reaction.The discharge capacities of the as-milled(60 h) alloys increased sharply from 182.0 mAh/gfor x=100 alloy to 1010.2 mAh/gfor x=200 alloy at current density of 60 mAh/g.Furthermore,milling time largely determined the performances of electrochemical reaction.The discharge capacity continued to grow along with prolonging milling time,while the cycle stability obviously decreased for x=100 alloy,and first declined and then augmented for the x=200 alloy with milling time extending.In addition,there was an optimal value with milling time varying for the high rate discharge abilities(HRD),which was 80.3%for x=100 alloys and 86.73%for x=200,respectively.     

A study on hydrogen storage and electrochemical properties of La_（0.55）Pr_（0.05）Nd_（0.15）Mg_（0.25）Ni_（3.5） （Co_（0.5）Al_（0.5））_x （x=0.0, 0.1, 0.3, 0.5） alloys

The La0.55Pr0.05Nd0.15Mg0.25Ni3.5(Co0.5Al0.5)x(x=0.0, 0.1, 0.3, 0.5) alloys were prepared by magnetic levitation melting under an Ar atmosphere, and the effects of Co and Al on the hydrogen storage and electrochemical properties were systematically investigated by pressure composition isotherms, cyclic voltammetry, Tafel polarization and electrochemical impedance spectroscopy testing. The results showed that the alloy phases were mainly consisted of (La,Pr)(Ni,Co)5, LaMg2Ni9, (La,Nd)2Ni7 and LaNi3 phases, and the cell volumes of (La,Pr)(Ni,Co)5, LaMg2Ni9, (La,Nd)2Ni7 and LaNi3 phases expanded with Co and Al element added. The hydrogen storage capacity initially increased from 1.36 (x=0) to 1.47 wt.% (x=0.3) and then decreased to 1.22 wt.% (x=0.5). The discharge capacity retention and cycle stability of the alloy electrodes were improved with the increase of Co and Al contents. The La0.55Pr0.05Nd0.15Mg0.25Ni3.5(Co0.5Al0.5)0.3 alloy electrode possessed better electrochemical kinetic characteristic.     

Structure and electrochemical hydrogen storage behaviors of Mg-Ce-Ni-Al-based alloys prepared by mechanical milling

The influences of milling time and Ce content on the electrochemical property and micro structure of asmilled Mg_(1-x)Ce_xNi_(0.9)Al_(0.1)(x=0,0.02,0.04,0.06,0.08)+50 wt%Ni alloys were investigated systematically.The as-milled alloys have an outstanding activation property.The cycle stability conspicuously grows up with milling time and Ce proportion increasing.The capacity retention rate at 100 th cycle of x=0.02 alloy augments from 47% to 63% when prolonging milling time from 5 to 30 h and it grows from55% to 82% for the 30 h milled alloy with Ce content growing from 0 to 0.08.The discharge capacity of x=0.02 alloy grows up invariably with milling time prolonging,while that of the 30 h milled alloys has the maximal value of 578.4 mAh/g with Ce content increasing.Moreover,the electrochemical kinetic properties of alloys significantly improve with milling duration extending,while they have the maximal values with Ce proportion varying.     

Hydriding and dehydriding characteristics of nanocrystalline and amorphous Mg20-xLaxNi10（X=0-6） alloys prepared by melt-spinning

In order to improve the hydrogenation and dehydrogenation performances of the Mg2Ni-type alloys, Mg was partially substituted by La in the alloy, and melt spinning technology was used for the preparation of the Mg20-xLaxNi10 (x=0, 2, 4, 6) hydrogen storage alloys. The structures of the alloys were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). It was found that no amorphous phase formed in the as-spun La-free alloy, but the as-spun alloys containing La held a major amorphous phase. When La content x≤2, the major phase in the as-cast alloys was Mg2Ni phase, but with further increase of La content, the major phase of the as-cast alloys changed into LaNi5+LaMg3 phase. Thermal stability of the as-spun alloys was studied by differential scanning calorimetry (DSC), showing that spinning rate was a negligible factor on the crystallization temperature of the amor-phous phase. The hydrogen absorption and desorption kinetics of the as-cast and as-spun alloys were measured using an automatically con-trolled Sieverts apparatus, confirming that the hydrogen absorption and desorption capacities and kinetics of the as-cast alloys clearly in-creased with rising La content. For La content x=2, the as-spun alloy displayed optimal hydrogen desorption kinetics at 200 ℃.     

Enhanced hydrogen storage performance of Mg-Cu-Ni system catalyzed by CeO_2 additive

In this paper,the as-cast Mg_(85)Cu_5Ni_(10) alloy and Mg_(85)Cu_5Ni_(10)-x wt% CeO_2(x=0,4,8) alloys were prepared successfully by vacuum induction smelting and ball milling.The microstructure,hydrogen absorption/desorption kinetics and thermodynamics performances of the alloys were studied in detail.The results show that the Mg_(85)Cu_5Ni_(10) alloys with CeO_2 additive have faster hydrogenation/dehydrogenation kinetics and better thermodynamic properties.The dehydrogenation activation energy is reduced to 81.211 kJ/mol from 119.142 by adding 8 wt% CeO_2.CeO_2 contributes to producing structural defects,nanocrystallines,grain boundaries,partial amorphous,lattice dislocations and cracks which are favorable to provide more hydrogen diffusion channels during hydriding/dehydriding process.Meanwhile,CeO_2 additive weakens the bond energy of Mg-H.These micro structural changes caused by CeO_2 additive improve the hydrogen storage performance of Mg_(85)Cu_5Ni_(10) markedly.     

Microstructure and improved hydrogen storage properties of Mg based alloy powders prepared by modified milling method

Abstract

In this study, the modified preparation method of combining planetary and vibratory ball milling was proposed to prepare Mg based hydrogen storage alloy powders. The comparison of micromorphology and hydrogen storage behaviour between Mg₂Ni prepared using the modified and conventional preparation methods were investigated experimentally. The comparison results showed that the combination of first planetary and then vibratory ball milling has more favourable effect on improving both the kinetics and the thermodynamics of ball milled Mg₂Ni alloys. The sample synthesised by first planetary milling for 40 h and then vibratory milling for 30 h has faster hydrogen absorption kinetics and lower dehydriding onset temperature than those prepared by the single method of planetary or vibratory milling and hydriding combustion synthesis owing to its popcorn-like microstructure. Moreover, this kind of modified method reduces the reaction enthalpy and activation energy by up to ～18 and 22% respectively.     

制备工艺对无钴AB5型贮氢合金的相结构和电化学性能的影响

用真空熔炼、快淬工艺以及球磨工艺制备稀土基无钴AB5型La（NiMnAlFe）5贮氢合金，用XRD测试了合金的相结构，并测试了不同制备工艺下合金的电化学性能。研究了制备工艺对无钴合金的相结构和电化学性能的影响。结果表明，由真空熔炼和快淬工艺制备的合金为CaCu5型单相结构，球磨合金由CaCu5型相和游离Ni相组成，并出现了非晶化趋势。快淬和球磨均使合金的放电容量降低，循环稳定性提高，但球磨工艺的影响更为显著，主要原因是球磨后合金中出现非晶化趋势。     

Effect of Ni/（La＋Mg） Ratio on Structure and Electrochemical Performance of La-Mg-Ni Alloy System

As the alloy with the most suitable Ni/(La+ Mg) ratio has higher capacity and good cycle stability,theeffects of Ni/(La+Mg) ratios on the electrochemical performances of the La0.80 Mg0.20 Nix (x= 3.5 to 5.0) alloys have been investigated to find the most suitable Ni/(La+ Mg) ratio.The results of XRD and SEM observations show that the phase composition of the alloys varies with different Ni/(La+Mg) ratios.When Ni/(La+Mg) is notmore than 4.25,all the alloys contain LaNi5 and (La,Mg)2Ni7 phases,in addition,the LaMg and (La,Mg)Ni3 phases exist in the x=3.5 and 3.75 alloys,respectively.The LaMg2Ni9 phase exists in the x=4.25 alloy.There are the LaNi5 and LaMg2 Ni9 phases in the x= 4.5,4.75,and 5.0 alloys.The phase abundance and cell volume change with different Ni content.When the Ni/(La+Mg) ratio is not more than 4.25,the alloys possess excellent activation capability,however,the activation capabilities of the alloys decrease with a further increase in the Ni/(La+Mg)ratio.With increasing the Ni/(La+ Mg) ratio,the maximum discharge capacities,the medium voltages,and the cycle stabilities of the alloys first increase and then decrease.When the Ni/(La+Mg) ratio is 3.75,the corresponding alloyhas the maximum discharge capacity among all the alloys.However,the cycle stability of the Ni/(La+ Mg)= 4.0 alloy is better than that of the others.     

Effect of praseodymium substitution for lanthanum on structure and properties of La0.65-xPrxNd0.12Mg0.23Ni3.4Al0.1（X=0.00-0.20） hydrogen storage alloys

In order to investigate the effect of substituting La with Pr on structural and hydrogen storage properties of La-Mg-Ni system (AB3.5-type) hydrogen storage alloys, a series of La0.65-xPrxNd0.12Mg0.23Ni3.4Al0.1(x=0, 0.10, 0.15, 0.2) hydrogen storage alloys were prepared. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS) analyses revealed that two alloys (x=0.0 and 0.10) were composed of (La, Mg)2(Ni,Al)7 phase, La(Ni,Al)5 phase and (La,Mg)Ni2 phase, while other alloys (x=0.15 and 0.20) consisted of (La,Mg)2(Ni,Al)7 phase, La(Ni,Al)5 phase, (La,Mg)Ni2 phase and (La, Mg)(Ni,Al)3 phase. All alloys showed, however, only one pressure plateau in P-C isotherms. The Pr/La ratio in alloy composition influenced hydrogen storage capacity and kinetics properties. Elec-trochemical studies showed that the discharge capacity decreased from 360 mAh/g (x=0.00) to 335 mAh/g (x=0.20) as x increased. But the high-rate dischargeability (HRD) of alloy electrodes increased from 26% (x=0.00) to 56% (x=0.20) at a discharge current density of Id=1800 mA/g. Anode polarization measurements were done to further understand the electrochemical kinetics properties after Pr substitution.     

添加钕对Mg2Ni储氢合金的结构和电极性能的影响

利用两步法制备了一系列添加Nd的三元Mg2-xNdxNi合金。XRD分析证实，当x=0．05，0．1时，制得的三元Mg2-xNdxNi合金均为Mg2Ni单相合金；三元Mg18Nd0．2Ni(x=0．2，0．3)合金为三相合金，三相分别为Mg2Ni，NdNi，NdMgNi4。模拟电池测试结果表明，同Mg2Ni合金相比，球磨10h的三元Mg1．8Nd0．2Ni合金和Mg17Nd03Ni合金电极的放电容量提高明显，且Mg17Nd03Ni合金电极的循环性能有明显改善。这极有可能与合金中NdMgNi4相的存在以及球磨形成的微结构有关。     

Effect of annealing treatment on hydrogen storage properties of La-Ti-Mg-Ni-based alloy

The present study dealt with investigations on the effects of annealing on the hydrogen storage properties of La 1.6 Ti 0.4 MgNi 9 alloys.The experimental alloys were prepared by magnetic levitation melting followed by annealing treatment.For La 1.6 Ti 0.4 MgNi 9 alloys,LaNi 5,LaNi 3 and LaMg 2 Ni 9 were the main phases,Ti 2 Ni phase appeared at 900℃.Annealing not only enhanced the maximum and effective hydrogen storage capacity,improved the hydrogen absorption/desorption kinetics,but also increased the discharge capacity.The cyclic stability had been improved markedly by annealing,e.g.,when the discharge capacity reduced to 60% of maximum discharge capacity,the charge/discharge cycles increased from 66(as-cast) to 89(annealed at 800℃) and 127 times(annealed at 900℃).La 1.6 Ti 0.4 MgNi 9 alloy annealed at 900℃ exhibited better electrochemical properties compared to the other two alloy electrodes.     

Co含量对La0.55Pr0.05Nd0.15Mg0.25Ni3.5-xCoxAl0.25（x=0～0.4）储氢合金电极性能的影响

采用电磁感应悬浮炉制备La0.55Pr0.05Nd0.15Mg0.25Ni3.5-xCoxAl0.25(x=0,0.1,0.2,0.3,0.4)系列合金,研究Co含量对合金的相结构、吸放氢性能和电化学性能的影响。研究结果表明,该系列合金主要由LaNi5、Nd2Ni7相组成。当Co含量大于0.2时,合金中出现La2Ni7相。压强-吸氢量-温度(Pressure-Content-Temprature)测试显示在303 K温度下,合金具有良好的吸氢性能,当x=0.4时合金的最大吸氢量为1.29(质量分数,%)。电化学测试表明:随x值变化,合金电极的最大放电容量分别为340.0(x=0.0)、346.6(x=0.1)、370.0(x=0.2)、320.0(x=0.3)和346.6(mA.h)/g(x=0.4);随Co含量增加,合金电极容量保持率不断增加,高倍率放电性能先增加后减小,循环伏安曲线、氢在合金体中的扩散系数D共同反映了合金电极的动力学特性。     

La0.8Mg0.2(Ni2.7Co0.6Al0.1Mn0.1)x贮氢合金的电化学性能分析

采用恒电位法、EIS分析及双电极系统对La0.8Mg0.2(Ni2.7Co0.6Al0.1Mn0.1)x(x=0.9～1.10)系列合金进行电化学性能分析。结果表明,x=1.05的合金具有较好的自放电性能(CR=97.3%),而x=1.10的合金有较高的电化学容量(369 mAh.g-1)。合金电极的电化学阻抗谱(EIS)表明,随着化学计量比x的增大,合金电极的电荷迁移电阻先减小后增大,动力学性能先增强后减弱。线性极化测试表明,随着化学计量比x的增大,合金电极表面的电化学反应速率先增大后减小。通过合金电极阳极电流对时间响应的半对数曲线计算的氢扩散系数D随着化学计量比x的增大先增大后降低,说明合金内部的氢扩散能力先增强后降低。     

Phase Structure and Electrochemical Properties of RE-Mg Based Composite Hydrogen Storage Alloys

Rareearth basedAB5 typealloy ,akindofhy drogenstoragealloyusedasnegativeelectrodemateri alsofthenickel/metalhydride (Ni/MH )secondarybattery ,haseasyinitialactivation ,longcyclelifeandlowcost ,butstillasmalldischargecapacity ,poorhigh ratedischargeability(HRD)andpoorpropertiesatlowtemperature[1,2 ] .Therefore ,howtoincreaseitsdischargecapacityandtoimproveotherelectrochemi calpropertiesismeaningfulbothintheoryandinpracticalapplication .Mg basedhydrogenstorageal loysareremarkablebecauseofitsr…     

Mg_(10)Al_((7-x))Li_2Ti_x(x=0,1,2,3)合金的制备及储氢性能研究

在氩气保护下,采用机械合金化法制备Mg_(10)Al_((7-x))Li_2Ti_x(x=0,1,2,3)合金,并通过XRD、SEM以及DSC等手段对合金进行表征。结果表明,适量的Ti替代Al可以提高合金的吸氢量、降低合金的初始氢化/脱氢温度和提高合金氢化/脱氢动力学性能。Mg_(10)Al_((7-x))Li_2Ti_x(x=1,2,3)合金样品比Mg10Al7Li2合金的初始氢化温度都降低了62K,而初始脱氢温度则分别降低了77、98和59K。当Ti的替代量为x=2时,合金的综合储氢性能最好。     

Phase structure and hydrogen storage properties of LaMg3.93Ni0.21 alloy

The phase structure and hydrogen storage property of LaMg3.93Ni0.21 alloy were studied.XRD and SEM results exhibited that LaMg3.93Ni0.21 alloy consisted mainly of LaMg3,La2Mg17 and LaMg2Ni phases;after hydriding/dehydriding process,all the three phases transformed,La3H7 phase existed and the actual hydrogen absorption phases were Mg and Mg2Ni phases.Pressure-composition-temperature (P-C-T)measurement showed that the reversible hydrogen storage capacity of LaMg3.93Ni0.21 alloy was 2.63 wt.%,and the absorption time for reaching 90%of the storage capacity was 124 s at 523 K,and it was 1850 s for deabsorbing 90%of the maximum dehydrogen capacity.The hydriding process of LaMg3.93Ni0.21 alloy followed the nucleation and growth mechanisms.The enthalpy and entropy for hydriding and dehydriding reactions of the Mg phase in LaMg3.93Ni0.21 alloy were calculated to be-66.38±1.10 kJ/mol H2,-100.96±1.96 J/(K·mol)H2 and 68.50±3.87 kJ/mol H2,98.28±5.48 J/(K·mol)H2,respectively.A comparison of these data with those of MgH2(-74.50 kJ/mol H2,-132.30 J/K·mol H2)suggested that the hydride of LaMg3.93Ni0.21 alloy was less stable than MgH2.The existence of La hydride and synergetic effect of multiphase led to higher reversible hydrogen storage capacity and better kinetic property at lower temperature for LaMg3.93Ni0.21 alloy.     

Hydriding/dehydriding properties of NdMgNi alloy with catalyst CeO2

Hydrogen storage composites Nd2Mg17-50 wt.%Ni-x wt.%CeO2（x=0, 0.5, 1.0, 1.5, 2.0） were obtained by induction-ball milling method. The catalytic effect of CeO₂ on hydriding kinetics of Nd₂Mg17-50 wt.%Ni composite was investigated. X-ray diffraction（XRD） and high resolution transmission electron microscopy（HRTEM）, selected area electron diffraction（SAED） analyses showed that Nd₂Mg17-50 wt.%Ni alloy had a multiphase structure, consisting of NdMg12, NdMg₂Ni, Mg₂Ni and Ni phases and the addition of catalyst CeO₂ prompted the composites to be partly transformed into amorphous strucutre. The CeO₂ improved the maximum hydrogen capacity of Nd₂Mg17-50 wt.%Ni alloy from 3.192 wt.% to 3.376 wt.%（x=1.0）. What’s more, the increment of diffusion coefficient D led to the faster hydriding kinetics, which was calculated by Avrami-Erofeev equation. The dehydrogenation temperature reduced from 515.54 to 504.72 K was mainly caused by the decrease of activation energy from 93.28 to 69.36 kJ /mol, which was proved by the Kissinger equation.     

A comparison study of hydrogen storage performances of SmMg11Ni alloys prepared by melt spinning and ball milling

The melt spinning(MS) and ball milling(BM) technologies are thought to be efficient to prepare nanostructured Mg and Mg-based alloys for improving their hydrogen storage performances. In this paper, two technologies, viz. melt spinning and ball milling, were employed to fabricate the SmMg_(11)Ni alloy. The structure and hydrogen storage performance of these two kinds of alloys were researched in detail. The results reveal that the as-spun and milled alloys both contain nanocrystalline and amorphous structures. By means of the measurement of PCT curves, the thermodynamic parameters of the alloys prepared by MS and BM are ΔN_(Ms)(des) = 82.51 kJ/mol and ΔH_(BM)(des) = 81.68 kJ/mol, respectively, viz.ΔH_(MS)(des) ΔH_(BM)(des). The as-milled alloy shows a larger hydrogen absorption capacity as compared with the as-spun one. The as-milled alloy exhibits lower onset hydrogen desorption temperature than the as-spun one. As to the as-milled and spun alloys, the onset hydrogen desorption temperatures are557.6 and 565.3 K, respectively. Additionally, the as-milled alloy shows a superior hydrogen desorption property than the as-spun one. On the basis of time that required by desorbing hydrogen of 3 wt% H_2, the as-milled alloy needs 1488.574,390 and 192 s corresponding to hydrogen desorption temperatures 593,613,633 and 653 K, while the as-spun alloy needs 3600,1020,778 and 306 s corresponding to the same temperatures. The dehydrogenation activation energies of the as-milled and spun alloys are 100.31 and105.56 kJ/mol, respectively, the difference of which is responsible for the much faster dehydriding rate of the as-milled alloy.