首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 593 毫秒
1.
针对薄宽带钢冷轧过程中易发多发的局部型中浪瓢曲缺陷,引入非均匀载荷宽度、弹性约束系数及平均张应力建立了屈曲变形的解析计算模型。应用能量最低原理对屈曲变形区域进行搜索求解,得到了局部型中浪屈曲临界条件(包括临界应力、屈曲波长和屈曲波宽),获得了其与非均匀载荷宽度、弹性约束系数、平均张应力的关系,并发现平均张应力是产生局部型中浪的重要影响因素。应用样条有限元方法对局部型中浪进行数值仿真分析,验证了屈曲解析计算方法的正确性。在实验轧机上进行了轧制研究,通过轧制获得了局部型中浪屈曲模态,对实验结果分析得到了相对应的屈曲临界条件,与解析法和样条有限元法结果基本吻合,证明了样条有限元计算方法与解析计算方法的正确性及其工程应用价值。  相似文献   

2.
Structural design simultaneously governed by earthquakes and environmental vibrations has received a lot of attention in recent years.Base-isolated composite structures are typically used in the above-mentioned structural design.The corresponding analysis involves validating structural safety under earthquakes and human comfort under environmental vibrations through a time-history analysis.Thus,a reasonable damping model is essential.In this work,the representatives of viscous damping model and rate-independent damping model,namely the Rayleigh damping model and uniform damping model,were adopted to investigate the influence of damping models on the time-history analysis of such structural designs.The energy dissipation characteristics of the above-mentioned damping models were illustrated via a dynamic test of recycled aggregate concrete specimens.A case study was performed on a base-isolated steelconcrete composite structure.The dynamic responses under the excitation of earthquakes and environmental vibrations were compared using different damping models.The uniform damping model was found to be more flexible than the Rayleigh damping model in dealing with excitations with different frequency components.The uniform damping model is both theoretically advantageous and easy to use,demonstrating its potential in dynamic analysis of structures designed simultaneously governed by earthquakes and environmental vibrations.  相似文献   

3.
Effective vibration recognition can improve the performance of vibration control and structural damage detection and is in high demand for signal processing and advanced classification.Signal-processing methods can extract the potent time-frequency-domain characteristics of signals;however,the performance of conventional characteristics-based classification needs to be improved.Widely used deep learning algorithms(e.g.,convolutional neural networks(CNNs))can conduct classification by extracting high-dimensional data features,with outstanding performance.Hence,combining the advantages of signal processing and deep-learning algorithms can significantly enhance vibration recognition performance.A novel vibration recognition method based on signal processing and deep neural networks is proposed herein.First,environmental vibration signals are collected;then,signal processing is conducted to obtain the coefficient matrices of the time-frequency-domain characteristics using three typical algorithms:the wavelet transform,Hilbert-Huang transform,and Mel frequency cepstral coefficient extraction method.Subsequently,CNNs,long short-term memory(LSTM)networks,and combined deep CNN-LSTM networks are trained for vibration recognition,according to the time-frequencydomain characteristics.Finally,the performance of the trained deep neural networks is evaluated and validated.The results confirm the effectiveness of the proposed vibration recognition method combining signal preprocessing and deep learning.  相似文献   

4.
全球数字3D电影领域的领头羊Real D公司于10月17日与欧洲投资商Terra Firma公司旗下在泛西欧拥有1600块银幕的Odeon院线以及UCI院线签署协议,将于未来2年中在英国、爱尔兰、德国、奥地利以及葡萄牙合作安装500块数字3D银幕.  相似文献   

5.
<正>本刊讯2014年12月23日,由中国建设报社、浙江省住房和城乡建设厅、绍兴市人民政府主办的第十二届中国建筑企业高峰论坛在绍兴市举行。来自全国各地的建筑行业主管部门、行业协会负责人,专家学者及企业代表等300余人齐聚一堂,围绕"创新融合,开放共赢"主题,共同分享了一场建筑行业思想盛宴。中国建设报社党委书记杜久才、社长翟建和中国建筑装饰协会会长李秉仁、中国土木工程协会副理事长刘  相似文献   

6.
<正>阅兵是展示辉煌的时刻,而为这一辉煌采取的所有的标准,不啻也是宝贵的财富,应当成为践行标准的榜样……这个月最令人难忘、最引人自豪、最提振国威的事情,当属"9.3"大阅兵,它有着以往没有的多重的亮点:首次以纪念抗日战争暨世界反法西斯战争胜利为阅兵主题,彰显维护和平是全世界人民共同的愿望。首次邀请外国军队代表参加分列式,体现纪念大会的国际性。首次组织抗战老兵包括国民党老兵参加,体现了对历史的尊重,体现全民族抗战的特色。首次编组英模部队方队受阅,展示中国共产党在抗战中定海  相似文献   

7.
汽车能满足人们生活、娱乐、工作的各种需求,为生活添加乐趣.商务车、房车、越野车或轿车,不管是驰骋还是安静地停放,都具有他们独特的气质,外型、轮廓、结构、颜色、车漆的纹理及其光泽度各有特点.拍摄广告就是要把汽车的这些独到之处提炼、表达出来,在观赏者印象中建立一个全方位的立体形象,激发消费者的购买愿望,这里就必须用到一个非凡的摄影手段--光线.  相似文献   

8.
Non-fullerene organic solar cell(NFOSC)has attracted tremendous attention due to their great potential for commercial applications.To improve its power conversion efficiency(PCE),generally,sequential solution deposition(SSD)methods have been employed to construct the graded vertical phase separation(VPS)of the bulk-heterojunction(BHJ)active layer for efficient exciton separation and charge transition.However,a variety of orthogonal solvents used in the SSD may lead to the unpredicted change in the BHJ morphology and introduce additional defects inside the BHJ bulk thus complicate the fabrication process.Here,a simple oscillating stratification preprocessing(OSP)is developed to facilitate the formation of graded VPS among the BHJ layer.As a result,a significant improvement is obtained in PCE from 10.96%to 12.03%,which is the highest value reported among PBDB-T:ITIC based NFOSC.  相似文献   

9.
Silicon is a low price and high capacity ancxje material for lithium-ion batteries.The yolk-shell structure can effectively accommodate Si expansion to improve stability.However,the limited rate performance of Si anodes can't meet people's growing demand for high power density.Herein,the phosphorus-doped yolk-shell Si@C materials(P-doped Si@C)were prepared through carbon coating on P-doped Si/SiOxmatrix to obtain high power and stable devices.Therefore,the as-prepared P-doped Si@C electrodes delivered a rapid increase in Coulombic efficiency from 74.4%to 99.6%after only 6 cycles,high capacity retention of-95%over 800 cycles at 4 A·g-1,and great rate capability(510 mAh·g-1at 35 A·g-1).As a result,P-doped Si@C anodes paired with commercial activated carbon and LiFePO4cathode to assemble lithium-ion capacitor(high power density of?61,080 W·kg-1at 20 A·g-1)and lithium-ion full cell(good rate performance with 68.3 mAh·g-1at 5 C),respectively.This work can provide an effective way tofurther improve power density and stability for energy storage devices.  相似文献   

10.
CIG前驱膜叠层方式对CIGS膜成分和结构的影响   总被引:1,自引:1,他引:0  
采用中频交流磁控溅射方法制备了三种不同叠层方式的CuInGa(CIG)前驱膜。采用固态法硒化,获得了CIGS吸收层。采用SEM和XRD观察和分析了薄膜的成分、组织结构和表面形貌。着重分析不同叠层方式的CIG前驱膜对CIGs吸收层薄膜成分、晶体结构的影响。结果表明,三种叠层方式的前驱膜都可以获得成分均匀、结构一致的CIGS吸收层薄膜。Ga可以有效抑制In2Se挥发相生成,保持成分的稳定性。以CuGa(top)/CuIn(bottom)形式的前驱膜有利于形成紧密晶粒排列的CIGS。  相似文献   

11.
The patent information currently available for the former USSR, EAPO, Russian Federation, Turkmenistan, Belarus, Tajikistan, Kazakhstan, Azerbaijan, Moldova, Armenia, Ukraine, Georgia, Kyrgyzstan, the Baltic countries and Uzbekistan is described. It is a complicated scene, in terms of the extent and depth of coverage, the media employed (paper, CD, on-line), and the use of open access, charged INTERNET access and commercial databases.  相似文献   

12.
A survey of experimental data for HFC-32 was prepared at the Institute of Thermomechanics in connection with planned experiments. In tabular form, surveys of thermodynamic, transport, and other property measurements, including pvT behavior, second virial coefficient, vapor pressure, saturation densities, critical parameters, heat capacities, speed of sound, thermal conductivity, viscosity, surface tension, refractive index, dielectric constant, and dipole moment, are presented. Tables include author)s) name(s), reference, year of publication, ranges of measurements, number of points, stated uncertainty, sample purity, and experimental method.  相似文献   

13.
高强度高模量玻璃纤维特性与应用   总被引:1,自引:0,他引:1  
与传统E玻璃纤维相比,高强度高模量玻璃纤维在拉伸强度、弹性模量、抗冲击性能、耐高温性能、耐腐蚀性能、电绝缘性和介电性能等方面都具有明显优势,可广泛地应用于航空航天、国防军事、风力发电、交通运输、体育休闲、压力容器、建筑工程、管道、环境处理、石油、机械等许多领域,成为本行业研究与开发的热点和重点.  相似文献   

14.
This research explores the injury severity of pedestrians in motor-vehicle crashes. It is hypothesized that the variance of unobserved pedestrian characteristics increases with age. In response, a heteroskedastic generalized extreme value model is used. The analysis links explanatory factors with four injury outcomes: fatal, incapacitating, non-incapacitating, and possible or no injury. Police-reported crash data between 1997 and 2000 from North Carolina, USA, are used. The results show that pedestrian age induces heteroskedasticity which affects the probability of fatal injury. The effect grows more pronounced with increasing age past 65. The heteroskedastic model provides a better fit than the multinomial logit model. Notable factors increasing the probability of fatal pedestrian injury: increasing pedestrian age, male driver, intoxicated driver (2.7 times greater probability of fatality), traffic sign, commercial area, darkness with or without streetlights (2-4 times greater probability of fatality), sport-utility vehicle, truck, freeway, two-way divided roadway, speeding-involved, off roadway, motorist turning or backing, both driver and pedestrian at fault, and pedestrian only at fault. Conversely, the probability of a fatal injury decreased: with increasing driver age, during the PM traffic peak, with traffic signal control, in inclement weather, on a curved roadway, at a crosswalk, and when walking along roadway.  相似文献   

15.
In 1985, the CODATA Bulletin published a Report of its Task Group on Thermophysical Properties of Solids which analyzed available data on, and gave recommended values for, the heat capacity of Cu, Fe, W, and Al2O3, the thermal expansion of Cu, Si, W, and Al2O3, the electrical resistivity of Cu, Fe, Pt, and W, the thermal conductivity of Al, Cu, Fe, and W, and the absolute thermopower of Pb, Cu, Pt, and W. The analysts for the different properties were R. B. Castanet, S. J. Collocott, P. D. Desai, C. Y. Ho, J. G. Hust, R. B. Roberts, C. A. Swenson, and G. K. White. The present paper is an updated version of the earlier report and includes more recent data which change some of the recommended values. notably the heat capacity of Cu and W and the thermal expansion of Si and W.  相似文献   

16.
The USPTO’s 21st century strategic plan represents a fundamental reappraisal of the tasks, responsibilities, working practices and priorities of the office. It has gone through several versions in seeking the most effective and acceptable way forward. In this article the author reviews the key factors, opinions and changes at each stage of the plan’s development, primarily from the patent perspective. In doing so, he refers to patent pendency and related timeliness issues, such as staffing, productivity, and potential outsourcing of search, classification, reclassification and examination functions. Quality initiatives, such as search tool enhancements, review by second examiner and e-government, are also described, as are wider issues affecting the plan, such as fee diversion, government outsourcing, and globalization issues such as trilateral efforts to share workloads. In concluding, the author points out that, although not fully finalised, the strategic plan is now largely agreed in a form that meets the key requirements for quicker processing, better quality and a rapid move towards e-government, within realistic fee increases, without concomitant massive staff increases, and in stages, with each stage being preceded by firm proof of concept procedures.  相似文献   

17.
Activity recognition is a challenging task in computer vision that finds widespread applications in various fields, such as motion capture, video retrieval, security, and video surveillance. The objective of this work is to present a technique for recognizing human activities in videos using Dragon Deep Belief Network (DDBN) and hybrid features, which comprises of features like shape, coverage factor, and Space-Time Interest (STI) points. Initially, the keyframes from the input video sequence are extracted using Structural Similarity (SSIM) measure. Then, the features, such as shape, coverage factor, and STI points, are extracted from the keyframes. Based on the feature vector extracted, the proposed DDBN classifier, which is designed by the effective combination of DBN and Dragonfly Algorithm (DA), a classification on human activities, such as walk, bend, etc. in videos. In DDBN, the weights in the network are selected optimally using DA. The weight update using the DA for each incoming feature improves the performance of the DDBN classifier. Further it improves the accuracy in classification of actions. The proposed DDBN classifier is experimented using KTH and Weizmann datasets based on three evaluation parameters, such as accuracy, sensitivity, and specificity. From the performance evaluation, the proposed DDBN classifier could attain better performance with the probability of 98.5% accuracy, 0.96 sensitivity, and 0.959 specificity, respectively.  相似文献   

18.
多波束测深系统多子阵检测法的改进及其性能分析   总被引:1,自引:0,他引:1       下载免费PDF全文
多波束测深系统中,相位检测法是实现超宽覆盖测量的关键技术之一。分析了分裂子阵相位检测法和多子阵检测法,并基于对子阵结构的分析,改进了多子阵检测法,给出了多子阵检测法输出信噪比的表达式,讨论了子阵结构对输出信噪比的影响,在理论分析基础上选择了三种子阵结构对海上试验数据进行了处理,验证了分析结果。处理结果表明,在优化参数基础上,多子阵检测法不但可实现多波束测深系统的超宽覆盖,而且可改善系统对海底的检测性能。  相似文献   

19.
This paper discusses a mathematical model for computing the thermodynamic properties of propane, n-butane, isobutane, and their mixtures, in the fluid phase using a method based upon statistical chain theory. The constants necessary for computations such as the characteristic temperatures of rotation, electronic state, etc. and the moments of inertia are obtained analytically applying a knowledge of the atomic structure of the molecule. The paper presents a procedure for calculating thermodynamic properties such as pressure, speed of sound, the Joule-Thomson coefficient, compressibility, enthalpy, and thermal expansion coefficient. This paper will discuss, for the first time, the application of statistical chain theory for accurate properties of binary and ternary mixtures including propane, n-butane, and isobutane, in their entire fluid phases. To calculate the thermodynamic properties of Lennard-Jones chains, the Liu-Li-Lu model has been used. The thermodynamic properties of the hydrocarbon mixtures are obtained using the one-fluid theory. Paper presented at the Fifteenth Symposium on Theremophysical Properties, June 22–27, 2003, Boulder, Colorado, U.S.A.  相似文献   

20.
黄慧  陈雨 《无机材料学报》2022,37(11):1151-1169
临床医学和生物材料的蓬勃发展, 促进了多种疾病的诊断成像、有效治疗和精准诊疗。材料与医学交叉学科(简称“材料医学”)的发展旨在克服传统临床医学面临的主要障碍和挑战, 如系统性毒性、生物利用度差、靶向部位特异性低、诊断/治疗效果不理想等。本文系统地阐述了近年来各种医学材料在疾病诊断、治疗和诊疗方面的应用进展, 特别是纳米医学材料的研究进展。首先, 重点讨论癌症治疗领域的生物医学成像(如光学成像、磁共振成像、超声成像、计算机断层成像等)和治疗策略(如光热治疗、动力学治疗、免疫治疗、协同治疗等)。此外, 我们还重点介绍了医学材料对骨组织工程、呼吸系统、中枢神经系统等疾病的诊断和治疗的最新进展, 并重点阐述了用于生物传感和抗微生物等其他代表性生物医学领域的医学材料。最后, 我们讨论了这些独特的医学材料在实际临床转化和应用中所面临的挑战和未来的机遇, 以促进其早日实现临床转化, 推动医学进步和造福患者。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号