Immobilization and stabilization of <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> SRT9 lipase on tri(4-formyl phenoxy) cyanurate

Lipase was extracted and purified from Pseudomonas aeruginosa SRT9. Culture conditions were optimized and highest lipase production amounting to 147.36 U/ml was obtained after 20 h incubation. The extracellular lipase was purified on Mono QHR5/5 column, resulting in a purification factor of 98-fold with specific activity of 12307.81 U/mg. Lipase was immobilized on tri (4-formyl phenoxy) cyanurate to form Schiff’s base. An immobilization yield of 85% was obtained. The native and immobilized lipases were used for catalyzing the hydrolysis of olive oil in aqueous medium. Comparative study revealed that immobilized lipase exhibited a shift in optimal pH from 6.9 (free lipase) to 7.5 and shift in optimal temperature from 55 °C to 70 °C. The immobilized lipase showed 20–25% increase in thermal stability and retained 75% of its initial activity after 7 cycles. It showed good stability in organic solvents especially in 30% acetone and methanol. Enzyme activity was decreased by ∼60% when incubated with 30% butanol. The kinetic studies revealed increase in K _M value from 0.043 mM (native) to 0.10 mM for immobilized lipase. It showed decrease in the V _max of immobilized enzyme (142.8 μmol min⁻¹ mg⁻¹), suggesting enzyme activity decrease in the course of covalent binding. The immobilized lipase retained its initial activity for more than 30 days when stored at 4 °C in Tris-HCl buffer pH 7.0 without any significant loss in enzyme activity.     

Production of MLM-Type Structured Lipids Catalyzed by Immobilized Heterologous <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> Lipase

This work aims to produce triacylglycerols (TAG) containing a medium-chain fatty acid (M) at positions sn-1,3 and a long-chain fatty acid (L) at sn-2 position, i.e. TAG of MLM type, by acidolysis of virgin olive oil with caprylic (C8:0) or capric (C10:0) acids, catalyzed by 1,3-selective Rhizopus oryzae heterologous lipase (rROL) immobilized in Eupergit^® C and modified sepiolite. This lipase was produced by the methylotrophic yeast Pichia pastoris. Reactions were performed at 25 and 40 °C, for 24 h, either in solvent-free or in n-hexane media, at a molar ratio 1:2 (olive oil:free fatty acid). Higher incorporations of C8:0 (21.6 mol%) and C10:0 (34.8 mol%) into the TAG were attained in solvent-free media, at 40 °C, when rROL immobilized in Eupergit^® C was used. In organic media, at 40 °C, only 15.9 and 14.1 mol%, incorporation of C8:0 or C10:0 were, respectively observed. Lower incorporations were attained for both acids (3.4–7.0 mol%) when native ROL (nROL) in both supports and rROL in modified sepiolite were used. rROL in Eupergit^® C maintained its activity during the first four or three 23-h batches, respectively when C8:0 (half-life time, t _1/2 = 159 h) or C10:0 (t _1/2 = 136 h) were used, decreasing thereafter following a time delay model.     

Immobilization of Pseudomonas cepacia lipase by sol-gel entrapment and its application in the hydrolysis of soybean oil

The immobilization of Lipase PS from Pseudomonas cepacia by entrapment within a chemically inert hydrophobic solgel support was studied. The gel-entrapped lipase was prepared by the hydrolysis of tetramethoxysilane (TMOS) with methyltrimethoxysilane (MTMS), isobutyltrimethoxysilane (iso-BTMS), and n-butyltrimethoxysilane. The immobilized lipase was subsequently used in the hydrolysis of soybean oil to determine its activity, recyclability, and thermostability. The biocatalyst so prepared was equal to or better than the free enzyme in its hydrolytic activity. The catalytic activity of the entrapped lipase strongly depended on the type of precursor that was used in its preparation. The lipase entrapped within TMOS/iso-BTMS showed the highest activity. The catalytic activity of the immobilized lipase was more pronounced during the earlier stages of the reaction. Thermostability of the lipase was significantly improved in the immobilized form. The immobilized lipase was stable up to 70°C, whereas for the free enzyme, moderate to severe loss of activity was observed beyond 40°C. The immobilized lipase was consistently more active and stable than the free enzyme. The immobilized lipase also proved to be very stable, as it retained more than 95% of its initial activity after twelve 1-h reactions.     

Thermostability and esterification of a polyethylene‐immobilized lipase from Bacillus coagulans BTS‐3

Extracellular lipase from Bacillus coagulans BTS‐3 was immobilized on activated (alkylated, 2.5% glutaraldehyde) and native (nonactivated) polyethylene powder, and its thermostability and esterification efficiency were studied. Immobilization on activated support was found to enhance thermostability as well as esterification efficiency. The optimum time for immobilization on activated (AS) and nonactivated (NS) polyethylene support was found to be 10 min, and the binding of the lipase was markedly higher on AS. Lipase was more efficiently bound to AS (64%) than to NS (30%) at an optimum temperature of 37°C. The pH and temperature optima for AS‐ and NS‐bound lipase were 9.0 and 55°C and 8.5 and 55°C respectively. At 55°C the free lipase, which had a half‐life of 2 h, lost most of its activity at elevated temperatures. In contrast, AS‐bound lipase retained 60%–80% of its original activity at 55°C, 60°C, 65°C, and 70°C for 2 h. Exposure to organic solvents resulted in enhanced lipase activity in n‐hexane (45%) and ethanol (30%). Both AS‐ and NS‐bound biocatalysts were recyclable and retained more than 85% of their initial activity up to the fourth cycle of hydrolysis of p‐nitrophenyl palmitate. The AS‐bound lipase efficiently performed maximum esterification (98%) of ethanol and propionic acid (300 mM each, 1 : 1) in n‐hexane at 55°C. With free or NS‐bound lipase in similar conditions, the conversion of reactants into ester was relatively low (40%). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3986–3993, 2006     

Optimized Production of MLM Triacylglycerols Catalyzed by Immobilized Heterologous <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> Lipase

Response surface methodology was used to model and optimize the acidolysis of virgin olive oil with caprylic (C8:0) or capric (C10:0) acids, aimed at the production of low caloric triacylglycerols (TAG) of MLM type, in solvent free media, catalyzed by the heterologous Rhizopus oryzae lipase (r-ROL) immobilized in Eupergit^® C. This lipase was produced in the methylotrophic yeast Pichia pastoris Mut^s phenotype (experiments with C10:0) or a Mut⁺ phenotype (experiments with C8:0), under different operational conditions. The r-ROL used in experiments with C10:0 presented a hydrolytic activity about 5 times of that presented by r-ROL used in acidolysis with C8:0. The experiments were carried out following a central composite rotatable design, as a function of the molar ratio (MR) medium chain fatty acid/TAG (1.6–4.4) and temperature (25–55 °C). Convex surfaces described by second order polynomials as a function of MR and temperature were well fitted to fatty acid incorporation values. After 24-h reaction, the predicted maximum incorporation of caprylic (15.5 mol%) or capric (33.3 mol%) acids in olive oil occurs at 37 and 35 °C, respectively, and at C8:0/TAG of 2.8:1 or C10:0/TAG of 3:1. These predicted optima were experimentally validated. Fermentation conditions used in r-ROL production highly affected hydrolytic activity and to a lesser extent interesterification activity.     

The effect of immobilization on the hydrolytic/interesterification activity of lipase from Rhizopus niveus

Lipase from Rhizopus niveus was immobilized by physical adsorption on Celite 545 and glass beads. The results showed that the highest immobilization efficiency and specific hydrolytic activity of 96% and 9.2 meq/mg protein/min, respectively, were obtained with Celite as the carrier. However, the specific hydrolytic activity of lipase adsorbed on glass beads by acetone precipitation was similar to that obtained by the Celite carrier, although the protein loading capacity was relatively low. The results showed that lipase immobilized on glass beads exhibited similar activity profiles with respect to reaction time, different enzyme concentrations, and water content, using trimyristin and tripalmitin as substrates, to those obtained with the free enzyme. In contrast, the immobilized lipase on Celite exhibited a considerably lower hydrolytic activity. However, the results also showed that the lipase activities of the free enzyme and the immobilized Celite enzyme were similar when the more hydrophilic triolein was used as the substrate. The interesterification of a mixture of tripalmitin and trimyristin or triolein was carried out using both the free and immobilized enzymes. The results indicated that the hydrolytic activity of lipase was similar in both cases for the first 24 h, after which it decreased dramatically. These findings suggest that at this late stage an equilibrium between the hydrolytic and interesterification reactions was reached.     

Properties of poly(AAc‐co‐HPMA‐cl‐EGDMA) hydrogel‐bound lipase of Pseudomonas aeruginosa MTCC‐4713 and its use in synthesis of methyl acrylate

Microbial lipases (E.C. 3.1.1.3) are preferred biocatalysts for the synthesis of esters in organic solvents. Various extracellular thermoalkaliphilic lipases have been reported from Pseudomonas sp. In the present study, a purified alkaline thermoalkalophilic extracellular lipase of Pseudomonas aeruginosa MTCC‐4713 was efficiently immobilized onto a synthetic poly(AAc‐co‐HPMA‐cl‐EGDMA) hydrogel by adsorption and the bound lipase was evaluated for its hydrolytic potential towards various p‐nitrophenyl acyl esters varying in their C‐chain lengths. The bound lipase showed optimal hydrolytic activity towards p‐nitrophenyl palmitate (p‐NPP) at pH 8.5 and temperature 45°C. The hydrolytic activity of the hydrogel‐bound lipase was markedly enhanced by the presence of Hg²⁺, Fe³⁺, and NH salt ions in that order. The hydrogel‐immobilized lipase (25 mg) was used to perform esterification in various n‐alkane(s) that resulted in ～ 84.9 mM of methyl acrylate at 45°C in n‐heptane under shaking (120 rpm) after 6 h, when methanol and acrylic acid were used in a ratio of 100 mM:100 mM, respectively. Addition of a molecular sieve (3Å × 1.5 mm) to the reaction system at a concentration of 100 mg/reaction vol (1 mL) resulted in a moderate enhancement in conversion of reactants into methyl acrylate (85.6 mM). During the repetitive esterification under optimum conditions, the hydrogel‐bound lipase produced 71.3 mM of ester after 10th cycle of reuse. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 183–191, 2007     

Synthesis of geranyl butyrate with the poly(acrylic acid‐co‐hydroxy propyl methacrylate‐cl‐ethylene glycol dimethacrylate) hydrogel immobilized lipase of Pseudomonas aeruginosa MTCC‐4713

Microbial lipases (E.C. 3.1.1.3) are the preferred biocatalysts for the synthesis of various fragrance compounds, such as linalool acetate, citronellal acetate, and geranyl acetate, in organic solvents over chemical synthesis. In this study, a purified alkaline extracellular lipase of Pseudomonas aeruginosa MTCC‐4713 was efficiently immobilized onto a synthetic poly(AAc‐co‐HPMA‐cl‐EGDMA) hydrogel by surface adsorption, and the bound lipase was evaluated for its hydrolytic potential toward various p‐nitrophenyl acyl esters, which differed in their C‐chain length. Among four series of hydrogels prepared by the variation of the concentrations of monomer and crosslinker, two hydrogels, namely, I_5d and I_20d, that exhibited relatively higher protein (lipase activity) bindings were selected to perform hydrolytic and synthetic (geranyl butyrate) reactions in aqueous and organic solvents. The hydrogel‐bound lipase was highly hydrolytic toward p‐nitrophenyl ester (C: 16; p‐nitrophenyl palmitate). The hydrogel‐immobilized lipase was quite stable and retained approximately 57.6% of its original hydrolytic activity after the fifth cycle of reuse under optimized conditions (pH 8.5, 65°C). The hydrogel‐immobilized lipase when used to perform the esterification of geraniol/butyric acid (400 : 100 mM) in n‐heptane resulted in 98.8 mM geranyl butyrate at 65°C under shaking (120 rpm) after 15 h of reaction time. The addition of a molecular sieve (3 Å × 1.5 mm) to the reaction system at a concentration of 100 mg per reaction volume (1 mL) resulted in the complete conversion of the reactants into geranyl butyrate. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Immobilization of lipase from Candida rugosa on synthetic polymer beads for use in the synthesis of fatty esters

Lipase from Candida rugosa was immobilized on three different supports, i.e. Amberlite XAD7, poly(methylmethacrylate) (PMMA) and celite. With the conditions tested, maximum adsorption can be achieved after 30 min. The activities of the immobilized lipases were determined by the esterification reaction of oleic acid and butanol. The immobilized lipases were found to be very effective in the esterification reaction. The immobilized activities generally were high in apolar organic solvents with log P values from 2·0 to 4·0. The preference for fatty acids as acyl donors differed in all cases of immobilized lipases. Lipase immobilized on XAD7 and PMMA exhibited high preference of acyl donors (fatty acids) with chain lengths 12–18 and 8–18, respectively. Lipase immobilized on celite, however, showed high activity in all cases of fatty acids. The nucleophile (alcohol) selectivity studies showed that lipase immobilized on XAD7 and celite was more accessible to alcohols of chain lengths 3–12. However, lipase immobilized on PMMA showed a significant preference towards alcohols of chain lengths from 3 to 10.     

Enhancement of enantioselectivity and reaction rate on the synthesis of (S)‐ketoprofen hydroxyalkyl ester in organic solvents via isopropanol‐dried immobilized lipase

Lipase‐catalyzed enantioselective esterification between (R,S)‐ketoprofen and alkanediol in organic solvents was developed to produce (S)‐ketoprofen hydroxyalkyl esters. The acyl acceptor of 1,6‐hexanediol for the resolution of (R,S)‐ketoprofen yielded only the enantioselectivity (the enantiomeric ratio of initial rate for (S)‐ketoprofen to that of (R)‐ketoprofen) V_S/V_R = 8, when crude Lipase MY originating from Candida rugosa was used. However, isopropanol‐dried immobilized lipases (IPA‐dried IM‐lipase) effectively enhanced the enantioselectivity to greater than 20 in the esterification of (R,S)‐ketoprofen when 1,4‐butanediol, 1,5‐pentanediol or 1,6‐hexanediol was employed. IPA‐dried IM‐lipase and isooctane were selected to use for optimally immobilized lipase and reaction medium, respectively. The IPA‐dried IM‐lipase exhibited the highest enantioselectivity, E = 26.7, to the (S)‐enantiomer with 1,5‐pentanediol and the best enzyme activity to the (S)‐enantiomer with 1,4‐butanediol. The finding indicates that the carbon chain length of the alkanediol strongly affected the enzyme activity and enantioselectivity of lipase‐catalyzed esterification. A maximum enantioselectivity of 37 at 27 °C was generated by IPA‐dried IM‐lipase for the enantioselective esterification of racemic ketoprofen with 1,4‐butanediol. IPA‐dried IM‐lipase can effectively increase the enantioselectivity of lipase. Copyright © 2005 Society of Chemical Industry     

Immobilization of hydrophobic lipase derivatives on to organic polymer beads

A simple and effective method of lipase immobilization is described. Lipase from Candida rugosa was first modified with several hydrophobic modifiers before being adsorbed on to organic polymer beads. The soluble hydrophobic lipase derivatives adsorbed more strongly on to the various polymers as compared with the native lipase. The optimal adsorption temperature of the native and modified lipases on all the polymers was 40°C. The optimal pH of adsorption was between 6 and 7. Lipase immobilized in this manner produced high catalytic recoveries which were affected by the type of modifiers, degree of modification and type of supports used. Monomethoxypolyethylene glycol (1900) activated with p-nitrophenyl chloroformate was found to be the best modifier of the enzyme at 95% modification, for adsorption to the polymers. Increasing the degree of modification of the enzyme increased the activity which was immobilized. Generally, both native and hydrophobic lipase derivatives showed higher specific activities when immobilized on polar polymers compared with non-polar polymers.     

Lipase immobilized on poly (vinyl alcohol) modified polysulfone membrane: application in hydrolytic activities for olive oil

The advancement of membrane research closely relates to the activities of ‘immobilization of enzymes’. The modification of polymeric membrane surfaces according to tailor-made specifications is considered an art and useful in this arena. In this study, lipase is immobilized on Polyvinyl alcohol photomodified Polysulfone (PS–PVA) membranes. The maximum immobilization (1.48 mg/cm²) for PS–PVA membranes is achieved. The amount of immobilized lipase directly relates on the PVA content on the membrane. Scanning Electron Microscope and X-ray diffraction patterns show the evidences of lipase immobilization on membranes. The hydrolytic performances of lipase immobilized PS and PS–PVA–glu membranes for olive oil are studied. The free fatty acid (FFA %) and acid value (AV) parameters are determined by titrimetic analysis (1.53 and 3.04 for PS–PVA–glu) and compared with esterification GC-mass analysis data. The K _m and V _max values are 105 mM and 0.9 mM/min for lipase immobilized on PS–PVA–glu and 153.8 mM and 0.51 mM/min for lipase on PS. The reusability feature shows the lipase immobilized on PS–PVA–glu matrix have better stability (10.7% decrease) compared to lipase immobilized on PS matrix (33.3% decrease) after five cycles.     

Catalytic potential of a poly(AAc‐co‐HPMA‐cl MBAm)‐matrix‐immobilized lipase from a thermotolerant Pseudomonas aeruginosa MTCC‐4713

A purified alkaline thermo‐tolerant lipase from Pseudomonas aeruginosa MTCC‐4713 was immobilized on a series of five noble weakly hydrophilic poly(AAc‐co‐HPMA‐cl MBAm) hydrogels. The hydrogel synthesized by copolymerizing acrylic acid and 2‐hydroxy propyl methacrylate in a ratio of 5 : 1 (HG_5:1 matrix) showed maximum binding efficiency for lipase (95.3%, specific activity 1.96 IU mg^?1 of protein). The HG_5:1 immobilized lipase was evaluated for its hydrolytic potential towards p‐NPP by studying the effect of various physical parameters and salt‐ions. The immobilized lipase was highly stable and retained ～92% of its original hydrolytic activity after fifth cycle of reuse for hydrolysis of p‐nitrophenyl palmitate at pH 7.5 and temperature 55°C. However, when the effect of pH and temperature was studied on free and bound lipase, the HG_5:1 immobilized lipase exhibited a shift in optima for pH and temperature from pH 7.5 and 55°C to 8.5 and 65°C in free and immobilized lipase, respectively. At 1 mM concentration, Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions promoted and Co²⁺ ions inhibited the hydrolytic activities of free as well as immobilized lipase. However, exposure of either free or immobilized lipase to any of these ions at 5 mM concentration strongly increased the hydrolysis of p‐NPP (by ～3–4 times) in comparison to the biocatalysts not exposed to any of the salt ions. The study concluded that HG_5:1 matrix efficiently immobilized lipase of P. aeruginosa MTCC‐4713, improved the stability of the immobilized biocatalyst towards a higher pH and temperature than the free enzyme and interacted with Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions to promote rapid hydrolysis of the substrate (p‐NPP). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4252–4259, 2006     

Designing acrylamide‐ and methacrylate‐based novel supports for lipase immobilization

To design efficient polymeric supports for lipase immobilization, two series of hydrogels based on acrylamide and three methacrylates were prepared via crosslinking with ethylene glycol methacrylate and N,N‐methylenebisacrylamide. The three methacrylates used to prepare these hydrogels had different alkyl chain lengths: C₁ (methyl methacrylate), C₁₂ (dodecyl methacrylate), and C₁₈ (octadecyl methacrylate). In the reaction scheme, only the feed concentration of the hydrophobic component (methacrylate) was varied. The characterization of the hydrogels was carried out with Fourier transform infrared, scanning electron microscopy, and nitrogen analysis to establish their structural aspects and to obtain evidence for network formation; the swelling and water uptake of the hydrogels were studied as functions of the time, temperature, and pH. Lipase immobilization on selected hydrogels was studied as a function of the concentration of the methacrylate used in the feed and the nature of the crosslinker. The activity of the hydrogel series that showed the highest activity of the immobilized lipase was investigated further as a function of the methacrylate feed concentration, pH, and temperature. Some organic solvents were studied to investigate the effect of the nature of the solvent on the activity of the immobilized lipase. The activity of the immobilized lipase was more than that of the free lipase and was affected by the structural attributes of the polymeric supports and by the nature of the solvent. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Systemic Concocting of Cross-Linked Enzyme Aggregates of Candida antarctica Lipase B (Novozyme 435) for the Biomanufacturing of Rhamnolipids

In the present study, Candida antarctica lipase B was immobilized on amine-functionalized silica microspheres as cross-linked enzyme aggregates (CLEA) and utilized for the biomanufacturing of rhamnolipids (RL). Lipase CLEA synthesized under optimized conditions of 2.0:1.0 by volume of silica microsphere/enzyme concentration, a 1.0:2.5 (v/v) ratio of enzyme/2-propanol, 7 mM glutaraldehyde concentration, when incubated at pH 9.0 and 40 °C, for a cross-linking time of 30 min were observed to exhibit superior biocatalytic properties and a maximum enzyme load of 770 U g⁻¹. Lipase CLEA exhibited enhanced pH stability in acidic and alkaline media and increased temperature resistance as compared to free lipase. Both free and CLEA lipases were used to synthesize RL in different solvent systems. After 12 h, from initiation of the esterification, the degree of esterification (molar conversion yield) reached 46% and 71% in the batch mode. ¹H and ¹³C nuclear magnetic resonance (NMR) and high-performance liquid chromatographic (HPLC) analysis confirm RL production by CLEA lipase. The CLEA showed greater confrontation to enzyme-mediated bioprocess approach as compared to its soluble counterpart and exhibited excellent RL production and catalytic activity even after its tenth successive reuse.     

Enzymic synthesis of fatty esters by hydrophobic lipase derivatives immobilized on organic polymer beads

Lipase fromCandida rugosa was modified with several hydrophobic modifiers before being adsorbed onto organic polymer beads. The effects of different enzyme modifiers, supports, solvents, reaction temperatures, fatty acids, and alcohols on the activity of the immobilized enzyme were investigated. The immobilized lipases were good biocatalysts for esterification reactions in organic solvents. They exhibited high activities in all solvents tested, including polar solvents. The activity seemed to depend on the type of support rather than on the modifier of the enzyme. The medium polar support, XAD7, appeared to be the best for the modified lipases. The immobilized lipase favored the medium-chain fatty acids rather than the long-chain fatty acids as acyl donors. The alcohol selectivity of the enzyme was unchanged upon immobilization. The native and immobilized lipases favored the short-chain and terpene alcohols as nucleophiles.     

Esterification of n‐butyric acid with n‐butyl alcohol and transesterification of (R, S)‐phenylethanol by lipase immobilized on cellulose acetate–TiO2 gel fibre

Lipase (EC 3.1.1.3) was immobilized on cellulose acetate–TiO₂ gel fibre by the sol–gel method. The immobilized lipases were used for esterification of n‐butyric acid with n‐butyl alcohol and enantioselective acylation of (R, S)‐phenylethanol using vinyl acetate as an acyl donor. Compared with native lipase, the activity of the immobilized lipase was stable and relatively unaffected by the water content of the solvent and the substrate concentration. The data indicate that the lipases are immobilized on the fibre surface and that enzyme activity is influenced by bound water. However, the thermal reactivity and enantioselectivity of the immobilized lipase were less than those of native lipase. This may not reflect thermal inactivation of the enzyme but rather significant thermal contraction of the gel fibre by cellulose crystallization, resulting in liberation of bound water and a decrease in the amount of enzyme which is available for the reaction. Copyright © 2001 Society of Chemical Industry     

Synthesis of (Z)‐3‐hexen‐1‐yl acetate by lipase immobilized in polyvinyl alcohol nanofibers

Polyvinyl alcohol (PVA)‐nanofibers‐immobilized lipase were formed by electrospinning. The specific surface area of the nanofiber (5.96 m²/g) was about 250 times larger than that of PVA‐film‐immobilized lipase (0.024 m²/g). The PVA‐nanofibers‐immobilized lipase were used as the catalyst for the esterification of (Z)‐3‐hexen‐1‐ol (leaf alcohol) with acetic acid in hexane. The activity of the nanofiber is equivalent to that of commercially available immobilized lipase (Novozym‐435). The ester conversions of the nanofibers, Novozym‐435, the film and lipase powder reached 99.5% at 5 h, 100% at 5 h, 11.5% at 6 h, and 81.1% at 5.75 h, respectively. The nanofibers‐immobilized lipase showed higher activity for the esterification than the film‐immobilized lipase and lipase powder, probably because it has high specific surface area and high dispersion state of lipase molecules in PVA matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Properties and application of poly(methacrylic acid‐co‐dodecyl methacrylate‐cl‐N,N‐methylene bisacrylamide) hydrogel immobilized Bacillus cereus MTCC 8372 lipase for the synthesis of geranyl acetate

A range of fatty acid esters is now being produced commercially with immobilized microbial lipases (glycerol ester hydrolases; EC) in nonaqueous solvents. In this study, a synthetic hydrogel was prepared by the copolymerization of methacrylic acid and dodecyl methacrylate in the presence of a crosslinker, N,N‐methylene bisacrylamide. A purified alkaline thermotolerant bacterial lipase from Bacillus cereus MTCC 8372 was immobilized on a poly(methacrylic acid‐co‐dodecyl methacrylate‐cl‐N,N‐methylene bisacrylamide) hydrogel by an adsorption method. The hydrogel showed a 95% binding efficiency for the lipase. The bound lipase was evaluated for its hydrolytic potential toward various p‐nitrophenyl acyl esters with various C chain lengths. The bound lipase showed optimal hydrolytic activity toward p‐nitrophenyl palmitate at a pH of 8.5 and a temperature of 55°C. The hydrolytic activity of the hydrogel‐bound lipase was enhanced by Hg²⁺, Fe³⁺, and NH ions at a concentration of 1 mM. The hydrogel‐bound lipase was used to synthesize geranyl acetate from geraniol and acetic acid in n‐heptane. The optimization of the reaction conditions, such as catalyst loading, effect of substrate concentration, solvent (n‐pentane, n‐hexane, n‐heptane, n‐octane, and n‐nonane), reaction time, temperature, molecular sieve (3 Å × 1.5 mm) and scale up (at 50‐mL level), was studied. The immobilized lipase (25 mg/mL) was used to perform an esterification in n‐alkane(s) that resulted in the synthesis of approximately 82.8 mM geranyl acetate at 55°C in n‐heptane under continuous shaking (160 rpm) after 15 h when geraniol and acetic acid were used in a ratio of 100 : 100 mM. The addition of a molecular sieve (3 Å × 1.5 mm) to the reaction system at a concentration of 40 mg/mL in reaction volume (2 mL) resulted in an increase in the conversion of reactants into geranyl acetate (90.0 mM). During the repetitive esterification under optimum conditions, the hydrogel‐bound lipase produced ester (37.0 mM) after the eighth cycle of reuse. When the reaction volume was scaled up to 50 mL, the ester synthesized was 58.7 mM under optimized conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and application of partially porous poly(styrene‐divinylbenzene) particles for lipase immobilization

Partially porous poly(styrene‐divinylbenzene) (PS‐DVB) particles in the micron size range were prepared by the method of multistep swelling and polymerization involving the use of polymeric porogens. Polystyrene (PS) seeds prepared by dispersion polymerization were expanded in particle size by absorbing styrene and initiator, and then polymerized to form polymeric porogen particles. The newly synthesized PS chains served as the porogens of the PS‐DVB particles, resulting from the copolymerization of styrene and divinylbenzene in the swollen polymeric porogen particles. PS‐DVB particles with a specific surface area of up to 34 m²/g and a pore volume of up to 0.15 cm³/g were obtained. The average pore diameter of PS‐DVB particles was in the range of 15–24 nm. An increasing amount of toluene used in the copolymerization step increased the pore volume and specific surface area. Lipase from Candida rugosa was immobilized on the prepared PS‐DVB by physical adsorption. The optimum temperature for enzymatic activity was increased and the thermal deactivation of enzyme in organic solvent was slowed down by the immobilization. However, compared with soluble enzyme, the immobilized lipase on PS‐DVB retained a less activity after the first stage deactivation, suggesting a possible change in the conformation of enzyme molecule by immobilization. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 39–46, 2001