Preparation the Key Intermediate of Angiotensin‐Converting Enzyme (ACE) Inhibitors: High Enantioselective Production of Ethyl (R)‐2‐Hydroxy‐4‐Phenylbutyrate with Candida boidinii CIOC21

Forty microorganisms belonging to different taxonomical groups were used to catalyze the enantioselective reduction of ethyl 2‐oxophenylbutyrate to afford the corresponding ethyl 2‐hydroxy‐4‐phenylbutyrate. Several microorganisms led to over 99% ee of ethyl (S)‐2‐hydroxy‐4‐phenylbutyrate. Especially, we firstly found that the Candida boidinii CIOC21 could be effectively used for the enantioselective preparation the ethyl (R)‐2‐hydroxy‐4‐phenylbutyrate in pure aqueous medium with 99% ee, a key intermediate in the production of angiotensin‐converting enzyme (ACE) inhibitors.     

Synthesis and Biological Characterization of (3R,4R)‐4‐(2‐(Benzhydryloxy)ethyl)‐1‐((R)‐2‐hydroxy‐2‐phenylethyl)‐piperidin‐3‐ol and Its Stereoisomers for Activity toward Monoamine Transporters

A novel series of optically active molecules based on a 4‐(2‐(benzhydryloxy)ethyl)‐1‐((R)‐2‐hydroxy‐2‐phenylethyl)‐piperidin‐3‐ol template were developed. Depending on stereochemistry, the compounds exhibit various degrees of affinity for three dopamine, serotonin, and norepinephrine transporters. These molecules have the potential for treating several neurological disorders such as drug abuse, depression, and attention deficit hyperactivity disorder.

     

Stereo‐Controlled Asymmetric Bioreduction of α,β‐Dehydroamino Acid Derivatives

α,β‐Dehydroamino acid derivatives proved to be a novel substrate class for ene‐reductases from the ‘old yellow enzyme’ (OYE) family. Whereas N‐acylamino substituents were tolerated in the α‐position, β‐analogues were generally unreactive. For aspartic acid derivatives, the stereochemical outcome of the bioreduction using OYE3 could be controlled by variation of the N‐acyl protective group to furnish the corresponding (S)‐ or (R)‐amino acid derivatives. This switch of stereopreference was explained by a change in the substrate binding, by exchange of the activating ester group, which was proven by ²H‐labelling experiments.     

A Convenient Synthesis of 2,2′,6,6′‐Tetramethoxy‐ 4,4′‐bis(dicyclohexylphosphino)‐3,3′‐bipyridine (Cy‐P‐Phos): Application in Rh‐Catalyzed Asymmetric Hydrogenation of α‐(Acylamino)acrylates

The first example of the synthesis of an axially chiral bis(aryldicyclohexylphosphine) dioxide via catalytic hydrogenation of the optically resolved parent bis(aryldiphenylphosphine) dioxide was reported. The procedure for the synthesis of Cy‐P‐Phos ( 4d ) has thus successfully avoided the need for an otherwise lengthy synthetic route owing to the π‐excessive nature of one of the aryl groups in the latter. The use of Cy‐P‐Phos in the Rh(I)‐catalyzed asymmetric hydrogenation of the derivatives of methyl (Z)‐2‐acetamidocinnamate gave significantly higher rates of reaction as compared to the use of the previously reported optimal ligand Xyl‐P‐Phos ( 4c ) whilst the level of enantioselectivity was essentially maintained.     

Discovery of 5′′‐Chloro‐N‐[(5,6‐dimethoxypyridin‐2‐yl)methyl]‐2,2′:5′,3′′‐terpyridine‐3′‐carboxamide (MK‐1064): A Selective Orexin 2 Receptor Antagonist (2‐SORA) for the Treatment of Insomnia

The field of small‐molecule orexin antagonist research has evolved rapidly in the last 15 years from the discovery of the orexin peptides to clinical proof‐of‐concept for the treatment of insomnia. Clinical programs have focused on the development of antagonists that reversibly block the action of endogenous peptides at both the orexin 1 and orexin 2 receptors (OX₁R and OX₂R), termed dual orexin receptor antagonists (DORAs), affording late‐stage development candidates including Merck’s suvorexant (new drug application filed 2012). Full characterization of the pharmacology associated with antagonism of either OX₁R or OX₂R alone has been hampered by the dearth of suitable subtype‐selective, orally bioavailable ligands. Herein, we report the development of a selective orexin 2 antagonist (2‐SORA) series to afford a potent, orally bioavailable 2‐SORA ligand. Several challenging medicinal chemistry issues were identified and overcome during the development of these 2,5‐disubstituted nicotinamides, including reversible CYP inhibition, physiochemical properties, P‐glycoprotein efflux and bioactivation. This article highlights structural modifications the team utilized to drive compound design, as well as in vivo characterization of our 2‐SORA clinical candidate, 5′′‐chloro‐N‐[(5,6‐dimethoxypyridin‐2‐yl)methyl]‐2,2′:5′,3′′‐terpyridine‐3′‐carboxamide (MK‐1064), in mouse, rat, dog, and rhesus sleep models.     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Atom transfer radical polymerization of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene

Atom transfer radical polymerization (ATRP) of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene ((R)‐MAMBN) mediated by different amine ligands, copper(I) chloride and ethyl 2‐bromopropionate in different solvents, and reverse ATRP of (R)‐MAMBN were studied. It was shown that optically active polymers were obtained, with poor control of the molecular weights, and low polydispersities. Specific rotation of the polymers increased with increasing molecular weights. By comparison with (R)‐MAMBN, poly((R)‐MAMBN)s exhibits higher specific rotation and a positive Cotton effect. Copyright © 2003 Society of Chemical Industry     

Stereoselective Prostereogenic 3‐Oxo Ester Reduction Mediated by a Novel Yeast Alcohol Dehydrogenase Derived from Kluyveromyces marxianus CBS 6556

A yeast alcohol dehydrogenase (ADH) has been purified up to a purification factor value of 21,731‐fold from Kluyveromyces marxianus CBS 6556. The purification procedure consisted of two chromatographic steps (DEAE‐anion exchange and affinity chromatography). The optimal pH was 7, its optimal temperature was 40 °C and its co‐factor was NADPH. This novel ADH efficiently mediated the reduction of 3‐oxo esters with a high degree of stereoselectivity, providing chiral alcohols having the (S) absolute configuration at the newly formed stereogenic centre by delivering the hydride from the re‐face of the prochiral carbonyl compounds.     

3‐Hydroxy‐2‐[1′‐phenyl‐3′‐(p‐chlorophenyl)‐4′‐pyrazolyl]‐4‐oxo‐4H‐1‐benzopyran as a spectrophotometric reagent for trace determination of tungsten(vi)

3‐Hydroxy‐2‐[1′‐phenyl‐3′‐(p‐chlorophenyl)‐4′‐pyrazolyl]‐4‐oxo‐4H‐1‐benzopyran solution in acetone forms a yellow‐coloured complex with tungsten(vi ) in perchloric acid medium which is extractable into chloroform after equilibration. In this study, tests were carried out on this compound and it was found to be quite stable and to obey Beer’s law. Interactions with various ions were studied and the molar absorptivity, Sandell’s sensitivity and relative standard deviation were also investigated. Job’s method, the mole ratio method and the equilibrium‐shift method were also used. The ratio of metal to ligand was measured using a method that was simpler, more accurate, sensitive, rapid and selective as compared with existing methods. This method is applicable to the analysis of various samples of varied composition.     

Enantioenriched Calcium‐(R)‐5,5′,6,6′,7,7′,8,8′‐Octahydro‐BINOL (H8‐BINOL): An Efficient Catalyst for the Creation of a Quaternary Stereocenter#

An efficient catalyst for the creation of a quaternary stereocenter has been developed utilizing easily available, eco‐friendly CaCl₂ and applied for enantioselective carbon‐carbon bond forming reactions. Among the surveyed ligands, it was found that (R)‐5,5′,6,6′,7,7′,8,8′‐octahydro‐BINOL‐Ca ( 2f ) gave maximum ee (72%) with excellent yields.     

Synthesis and Characterization of 4,4′,5,5′‐Tetranitro‐2,2′‐Bi‐1H‐imidazole (TNBI)

We synthesized 4,4′,5,5′‐tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI), which may serve as a new energetic filler for high explosive formulations. TNBI was synthesized by treating an excess amount of sodium nitrate with 2,2′‐bi‐1H‐imidazole (BI), which was produced from glyoxal and ammonia gas. The overall synthetic yield was 32%. The synthesized TNBI was characterized by performing various chemical analyses including NMR, IR, and CHN analyses. Small scale sensitivity tests were carried out at both research institutes (ADD and ARDEC). The sensitivity results varied from ‘more sensitive than RDX’ to ‘substantially less sensitive than RDX’ according to the purity and conditions of the test samples. Based on our careful characterizations, this large variation in sensitivity was attributed to the moisture content that was present in the test samples due to a hygroscopic nature of TNBI. We also found that the hygroscopic nature of TNBI changed significantly due to the amount of impurities, especially sulfates.     

Influence of α′‐/α‐crystal polymorphism on properties of poly(l‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a biodegradable and biocompatible thermoplastic polyester produced from renewable sources, widely used for biomedical devices, in food packaging and in agriculture. It is a semicrystalline polymer, and as such its properties are strongly affected by the developed semicrystalline morphology. As a function of the crystallization temperature, PLLA can form different crystal modifications, namely α′‐crystals below about 120 °C and α‐crystals at higher temperatures. The α′ modification is therefore of special importance as it may be the preferred polymorph developing at processing‐relevant conditions. It is a metastable modification which typically transforms into the more stable α‐crystals on annealing at elevated temperature. The structure, kinetics of formation and thermodynamics of α′‐ and α‐crystals of PLLA are reviewed in this contribution, together with the effect of α′‐/α‐crystal polymorphism on the properties of PLLA. © 2018 Society of Chemical Industry     

Stabilization of Telomeric I‐Motif Structures by (2′S)‐2′‐Deoxy‐2′‐C‐Methylcytidine Residues

G‐quadruplexes and i‐motifs are tetraplex structures present in telomeres and the promoter regions of oncogenes. The possibility of producing nanodevices with pH‐sensitive functions has triggered interest in modified oligonucleotides with improved structural properties. We synthesized C‐rich oligonucleotides carrying conformationally restricted (2′S)‐2′‐deoxy‐2′‐C‐methyl‐cytidine units. The effect of this modified nucleoside on the stability of intramolecular i‐motifs from the vertebrate telomere was investigated by UV, CD, and NMR spectroscopy. The replacement of selected positions of the C‐core with C‐modified residues induced the formation of stable intercalated tetraplexes at near‐neutral pH. This study demonstrates the possibility of enhancing the stability of the i‐motif by chemical modification.     

Synthesis of Substituted 2,2′‐Bipyridines and 2,2′:6′,2′′‐Terpyridines by Cobalt‐Catalyzed Cycloaddition Reactions of Nitriles and α,ω‐Diynes with Exclusive Regioselectivity

A variety of substituted 2,2′‐bipyridines were synthesized by a 1,2‐bis(diphenylphosphino)ethane (dppe)/cobalt chloride hexahydrate (CoCl₂⋅6 H₂O)/zinc‐catalyzed [2+2+2] cycloaddition reaction of diynes and nitriles, with all reactions exhibiting exclusive regioselectivity. Thus, symmetrical and unsymmetrical 1,6‐diynes and 2‐cyanopyridine reacted in the presence of 5 mol % of dppe, 5 mol % of CoCl₂⋅6 H₂O and 10 mol % of zinc powder to provide the corresponding 2,2′‐bipyridines. Under identical reaction conditions, 1‐(2‐pyridyl)‐1,6‐diynes and nitriles reacted smoothly with exclusive regioselectivity to produce 2,2′‐bipyridines in good yield. 2,2′‐Bipyridines were also obtained by the double [2+2+2] cycloaddition reaction of 1,6,8,13‐tetraynes with nitriles. Similarly, 2,2′:6′,2′′‐terpyridines were synthesized from 1‐(2‐pyridyl)‐1,6‐diyne and 2‐cyanopyridine. The regiochemistry observed can be explained by considering the electronic nature of cobaltacyclopentadiene intermediates and nitriles. A survey of the exclusive regiochemical trend gives reasonable credence to the synthetic potential of the present method.     

Catalytic Asymmetric 1, 3‐Dipolar Cycloaddition Reaction of Nitrones with α′‐Phosphoric Enones by a Chiral Ligand‐ Copper(II) Triflate Complex

Using the C₂‐symmetric bis‐oxazoline copper(II) catalyst 6f as a chiral Lewis acid, α′‐phosphoric enones 2 undergo 1,3‐dipolar cycloaddition with nitrones 3 to provide isoxazolidines 4 with very high enantioselectivity and endo/exo selectivity.     

Structure‐Based Insight into the Asymmetric Bioreduction of the CC Double Bond of α,β‐Unsaturated Nitroalkenes by Pentaerythritol Tetranitrate Reductase

Biocatalytic reduction of α‐ or β‐alkyl‐β‐arylnitroalkenes provides a convenient and efficient method to prepare chiral substituted nitroalkanes. Pentaerythritol tetranitrate reductase (PETN reductase) from Enterobacter cloacae st. PB2 catalyses the reduction of nitroolefins such as 1‐nitrocyclohexene ( 1 ) with steady state and rapid reaction kinetics comparable to other old yellow enzyme homologues. Furthermore, it reduces 2‐aryl‐1‐nitropropenes ( 4a–d ) to their equivalent (S)‐nitropropanes 9a–d . The enzyme shows a preference for the (Z)‐isomer of substrates 4a–d , providing almost pure enantiomeric products 9a–d (ees up to>99%) in quantitative yield, whereas the respective (E)‐isomers are reduced with lower enantioselectivity (63–89% ee) and lower product yields. 1‐Aryl‐2‐nitropropenes ( 5a , b ) are also reduced efficiently, but the products (R)‐ 10 have lower optical purities. The structure of the enzyme complex with 1‐nitrocyclohexene ( 1 ) was determined by X‐ray crystallography, revealing two substrate‐binding modes, with only one compatible with hydride transfer. Models of nitropropenes 4 and 5 in the active site of PETN reductase predicted that the enantioselectivity of the reaction was dependent on the orientation of binding of the (E)‐ and (Z)‐substrates. This work provides a structural basis for understanding the mechanism of asymmetric bioreduction of nitroalkenes by PETN reductase.     

Adhesion property of novel polyimides with 1‐[3′,5′‐bis(trifluoromethyl)phenyl] pyromellitic dianhydride

Novel polyimides were synthesized from 1‐[3′,5′‐bis(trifluoromethyl)phenyl] pyromellitic dianhydride (6FPPMDA) by a conventional two‐step process: the preparation of poly(amic acid) followed by solution imidization via refluxing in p‐chlorophenol. The diamines used for polyimide synthesis included bis(3‐aminophenyl)‐3,5‐bis(trifluoromethyl)phenyl phosphine oxide, bis(3‐aminophenyl)‐4‐trifluoromethylphenyl phosphine oxide, and bis(3‐aminophenyl)phenyl phosphine oxide. The synthesized polyimides were designed to have a molecular weight of 20,000 g/mol by off‐stoichiometry and were characterized by Fourier transform infrared, NMR, differential scanning calorimetry, and thermogravimetric analysis. In addition, their intrinsic viscosity, solubility, water absorption, and coefficient of thermal expansion (CTE) were also measured. The adhesion properties of the polyimides were evaluated via a T‐peel test with bare and silane/Cr‐coated Cu foils, and the failure surfaces were investigated with scanning electron microscopy. The 6FPPMDA‐based polyimides exhibited high glass‐transition temperatures (280–299°C), good thermal stability (>530°C in air), low water absorption (1.46–2.16 wt %), and fairly low CTEs (32–40 ppm/°C), in addition to good adhesion properties (83–88 g/mm) with silane/Cr‐coated Cu foils. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1801–1809, 2005     

Crosslinking of 1,9‐bis[glycidyloxypropyl]penta‐ (1′H,1′H,2′H,2′H‐perfluoroalkylmethylsiloxane)s with α,ω‐diaminoalkanes: The cure behavior and film properties

A series of nine films were prepared via phenol‐catalyzed thermal crosslinking reactions of 1,9‐bis‐ [glycidyloxypropyl]pentasiloxanes {1,9‐bis[glycidyloxypro‐ pyl]decamethylpentasiloxane (I), 1,9‐bis[glycidyloxypropyl]‐3,5,7‐tris(3′,3′,3′‐trifluoropropyl)heptamethylpentasiloxane (II), and 1,9‐bis[glycidyloxypropyl]‐3,5,7‐tris(1′H,1′H,2′H, 2′H‐perfluorooctyl)heptamethylpentasiloxane (III)} with α,ω‐diaminoalkanes [1,6‐diaminohexane (a), 1,8‐diaminooctane (b), and 1,12‐diaminododecane (c)]. The crosslink density was controlled by the choice of a–c. The cure behavior of I–III with a–c was studied with differential scanning calorimetry. The mechanical properties of the films were determined by dynamic mechanical thermal analysis. Their thermal stability was analyzed by thermogravimetric analysis. The surface properties of the films were evaluated with static contact‐angle measurements. These films represented a novel class of epoxies with an unusual combination of properties: high flexibility (low glass‐transition temperature), good thermal stability, and hydrophobic surfaces. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 203–210, 2004