Immobilization of Pycnoporus sanguineus laccase by metal affinity adsorption on magnetic chelator particles

BACKGROUND: Immobilized enzymes provide many advantages over free enzymes including repeated or continuous reuse, easy separation of the product from reaction media, easy recovery of the enzyme, and improvement in enzyme stability. In order to improve catalytic activity of laccase and increase its industrial application, there is great interest in developing novel technologies on laccase immobilization. RESULTS: Magnetic Cu²⁺‐chelated particles, prepared by cerium‐initiated graft polymerization of tentacle‐type polymer chains with iminodiacetic acid (IDA) as chelating ligand, were employed for Pycnoporus sanguineus laccase immobilization. The particles showed an obvious high adsorption capacity of laccase (94.1 mg g^?1 support) with an activity recovery of 68.0% after immobilization. The laccase exhibited improved stability in reaction conditions over a broad temperature range between 45 °C and 70 °C and an optimal pH value of 3.0 after being adsorbed on the magnetic metal‐chelated particles. The value of the Michaelis constant (K_m) of the immobilized laccase (1.597 mmol L^?1) was higher than that of the free one (0.761 mmol L^?1), whereas the maximum velocity (V_max) was lower for the adsorbed laccase. Storage stability and temperature endurance of the immobilized laccase were found to increase greatly, and the immobilized laccase retained 87.8% of its initial activity after 10 successive batch reactions. CONCLUSION: The immobilized laccase not only can be operated magnetically, but also exhibits remarkably improved catalytic capacity and stability properties for various parameters, such as pH, temperature, reuse, and storage time, which can provide economic advantages for large‐scale biotechnological applications of laccase. Copyright © 2007 Society of Chemical Industry     

Immobilization of invertase onto dimer acid‐co‐alkyl polyamine

Invertase was immobilized onto the dimer acid‐co‐alkyl polyamine after activation with 1,2‐diamine ethane and 1,3‐diamine propane. The effects of pH, temperature, substrate concentration, and storage stability on free and immobilized invertase were investigated. Kinetic parameters were calculated as 18.2 mM for K_m and 6.43 × 10^?5 mol dm^?3 min^?1 for V_max of free enzyme and in the range of 23.8–35.3 mM for K_m and 7.97–11.71 × 10^?5 mol dm^?3 min^?1 for V_max of immobilized enzyme. After storage at 4°C for 1 month, the enzyme activities were 21.0 and 60.0–70.0% of the initial activity for free and immobilized enzyme, respectively. The optimum pH values for free and immobilized enzymes were determined as 4.5. The optimum temperatures for free and immobilized enzymes were 45 and 50°C, respectively. After using immobilized enzyme in 3 days for 43 times, it showed 76–80% of its original activity. As a result of immobilization, thermal and storage stabilities were increased. The aim of this study was to increase the storage stability and reuse number of the immobilized enzyme and also to compare this immobilization method with others with respect to storage stability and reuse number. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1526–1530, 2004     

Immobilization of glucoamylase on magnetic poly(styrene) particles

Magnetic poly(styrene) particles including active groups were prepared for enzyme immobilization without any activation process. Glucoamylase, which is widely used in industry, was immobilized onto these particles. The effects of pH, buffer concentration, and temperature on immobilization were investigated; moreover, the effect of immobilization temperature on immobilized glucoamylase activity was determined for the hydrolysis of maltose. The acetate buffer with the concentration of 6 × 10⁻⁴ M at pH 4 and 20–30°C was found as the most suitable medium for the immobilization of the glucoamylase. The amount of bound protein is 8 mg/g particle with the immobilization yield of 70%. The maximum activity obtained with immobilized glucoamylase is approximately 70% of the free one. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 69–73, 1999     

Cinnamic ester of D‐sorbitol for immobilization of mushroom tyrosinase

Mushroom tyrosinase was immobilized by adsorption onto the totally cinnamoylated derivative of D ‐sorbitol. The polymerization and cross‐linking of the derivative initially obtained was achieved by irradiation in the ultraviolet region, where this prepolymer shows maximum sensitivity. Immobilization of tyrosinase on this support involves a process of physical adsorption and intense hydrophobic interactions between the cinnamoyl groups of the support and related groups of the enzyme. The pH value, enzyme concentration and immobilization time were all important parameters affecting immobilization efficiency; also, enzyme immobilization efficiency correlated well with the tyrosinase isoelectric point. The immobilized enzyme showed an optimum measuring pH of 3.5 and greater activity at acid and neutral pH values than the soluble enzyme. The optimal reaction temperature was 35 °C and the temperature profile was broader than that of the free enzyme or of the enzyme immobilized on other supports. The apparent Michaelis constant of mushroom tyrosinase immobilized on the SOTCN derivative acting on 4‐tert‐butylcatechol (TBC) was 0.40 ± 0.02 mmol dm^?3, which was lower than for the soluble enzyme, suggesting that the affinity of this enzyme for this substrate was greater when immobilized than when in solution. Immobilization stabilized the enzyme and made it less susceptible to activity loss during storage at pH values in the range 4–5.5, and the suicide inactivation of the immobilized tyrosinase was null or negligible in a reaction medium with 4‐tert‐butylcatechol at a concentration of 0.4 mmol dm^?3. The results show that cinnamic carbohydrate esters of D ‐sorbitol are an appropriate support for tyrosinase immobilization and could be of use for several tyrosinase applications. Copyright © 2005 Society of Chemical Industry     

One‐Pot Lipase Entrapment Within Silica Particles to Prepare a Stable and Reusable Biocatalyst for Transesterification

In order to enhance the reusability, Rhizomucor miehei lipase was entrapped in a single step within silica particles having an oleic acid core (RML@SiO₂). Characterization of RML@SiO₂ by scanning and transmission electron microscopy and Fourier transform infrared studies supported the lipase immobilization within silica particles. The immobilized enzyme was employed for transesterification of cottonseed oil with methanol and ethanol. Under the optimum reaction conditions of a methanol‐to‐oil molar ratio of 12:1 or ethanol‐to‐oil molar ratio of 15:1, stirring speed of 250 revolutions/min (flask radius = 3 cm), reaction temperature of 40 °C, and biocatalyst concentration of 5 wt% (with respect to oil), more than 98 % alkyl ester yield was achieved in 16 and 24 h of reaction duration in case of methanolysis and ethanolysis, respectively. The immobilized enzyme did not require any buffer solution or organic solvent for optimum activity; hence, the produced biodiesel and glycerol were free from metal ion or organic molecule contamination. The activation energies for the immobilized enzyme‐catalyzed ethanolysis and methanolysis were found to be 34.9 ± 1.6 and 19.7 ± 1.8 kJ mol^?1, respectively. The immobilized enzyme was recovered from the reaction mixture and reused in 12 successive runs without significant loss of activity. Additionally, RML@SiO₂ demonstrated better reusability as well as stability in comparison to the native enzyme as the former did not lose the activity even upon storage at room temperature (25–30 °C) over an 8‐month period.     

Comparative study of poly(vinyl alcohol)‐based support materials for the immobilization of glucose oxidase

BACKGROUND: The performances of four types of glucose oxidase (GOD) immobilization materials based on poly(vinyl alcohol) (PVA) were compared. The matrices of interest were chemically‐linked PVA, freeze‐thawed PVA cryogel, tetramethoxysilane (TMOS) sol‐gel‐PVA hybrid material, and alumina sol‐gel‐PVA hybrid material. RESULTS: Overall, the membranes showed good sensitivity except for the chemically cross‐linked PVA. However, the main differences with the enzyme immobilization methods were enzyme leakage and values of K_m^app. CONCLUSION: Freeze‐thawed PVA‐GOD membranes and TMOS‐PVA, which showed satisfactory sensitivity and adequate value of K_m^app, were quite promising as support materials for immobilizing GOD. Copyright © 2007 Society of Chemical Industry     

Immobilization of polyphenol oxidase on carboxymethylcellulose hydrogel beads: preparation and characterization

Carboxymethylcellulose (CMC) beads were prepared by a liquid curing method in the presence of trivalent ferric ions, and epicholorohydrin was covalently attached to the CMC beads. Polyphenol oxidase (PPO) was then covalently immobilized onto CMC beads. The enzyme loading was 603 µg g⁻¹ bead and the retained activity of the immobilized enzyme was found to be 44%. The K_m values were 0.65 and 0.87 mM for the free and the immobilized enzyme, and the V_max values were found to be 1890 and 760 U mg⁻¹ for the free and the immobilized enzyme, respectively. The optimum pH was 6.5 for the free and 7.0 for the immobilized enzyme. The optimum reaction temperature for the free enzyme was 40 °C and for the immobilized enzyme was 45 °C. Immobilization onto CMC hydrogel beads made PPO more stable to heat and storage, implying that the covalent immobilization imparted higher conformational stability to the enzyme. © 2000 Society of Chemical Industry     

<Emphasis Type="Italic">Penicillium</Emphasis> sp. ZD-Z1 chitosanase immobilized on DEAE cellulose by cross-linking reaction

Chitosanase obtained fromPenicillium sp.ZD-Z1 was immobilized on DEAE cellulose with glutaraldehyde by cross-linking reaction. The optimal conditions of immobilization were as follows: 0.1 g DEAE cellulose was treated with 5 ml 5% glutaraldehyde solution; then 2.3 mg chitosanase was immobilized on the carrier. The optimal temperature and pH was 60 °C and 4.0, and the K _m value was 18.87 g/L. Under optimal conditions, the activity of immobilized enzyme is 1.5 U/g, and the recovery of enzyme activity is 81.3%. After immobilization, the optimal temperature and K _m value increased (from 50 °C to 60 °C, from 2.49 g/L to 18.87 g/L), whereas the optimal pH was reduced (from 5.0 to 4.0). The enzyme activity loss was less than 20% after 10 times batch reaction; the immobilized enzyme showed good operation stability.     

Covalent immobilization of penicillin G acylase onto amine-functionalized PVC membranes for 6-APA production from penicillin hydrolysis process. II. Enzyme immobilization and characterization

This article describes the covalent immobilization of penicillin G acylase (PGA) onto glutaraldehyde-activated NH₂-PVC membranes. The immobilized enzyme was used for 6-aminopenicillanic acid production from penicillin hydrolysis. Parameters affecting the immobilization process, which affecting the catalytic activity of the immobilized enzyme, such as enzyme concentration, immobilization's time and temperature were investigated. Enzyme concentration and immobilization's time were found of determine effect. Higher activity was obtained through performing enzyme immobilization at room temperature. Both optimum temperature (35°C) and pH (8.0) of immobilized enzyme have not been altered upon immobilization. However, immobilized enzyme acquires stability against changes in the substrate's pH and temperature values especially in the higher temperature region and lower pH region. The residual relative activities after incubation at 60°C were more than 75% compared to 45% for free enzyme and above 50% compared to 20% for free enzyme after incubation at pH 4.5. The apparent kinetic parameters K_M and V_M were determined. K_M of the immobilized PGA (125.8 mM) was higher than that of the free enzyme (5.4 mM), indicating a lower substrate affinity of the immobilized PGA. Operational stability for immobilized PGA was monitored over 21 repeated cycles. The catalytic membranes were retained up to 40% of its initial activity after 10.5 working h. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of Cu(II)‐chelated poly(vinyl alcohol) nanofibrous membranes for catalase immobilization

Poly(vinyl alcohol) (PVA) nanofibers were formed by electrospinning. Metal chelated nanofibrous membranes were prepared by reaction between Cu(II) solution and nanofibers, and which were used as the matrix for catalases immobilization. The constants of Cu(II) adsorption and properties of immobilized catalases were studied in this work. The Cu(II) concentration was determined by atomic absorption spectrophotometer (AAS), the immobilized enzymes were confirmed by the Fourier transform infrared spectroscopy (FTIR), and the amounts of immobilized enzymes were determined by the method of Bradford on an ultraviolet spectrophotometer (UV). Adsorption of Cu(II) onto PVA nanofibers was studied by the Langmuir isothermal adsorption model. The maximum amount of coordinated Cu(II) (q_m) was 2.1 mmol g⁻¹ (dry fiber), and the binding constant (K_l) was 0.1166 L mmol⁻¹. The immobilized catalases showed better resistance to pH and temperature inactivation than that of free form, and the thermal and storage stabilities of immobilized catalases were higher than that of free catalases. Kinetic parameters were analyzed for both immobilized and free catalases. The value of V_max (8425.8 μmol mg⁻¹) for the immobilized catalases was smaller than that of the free catalases (10153.6 μmol mg⁻¹), while the K_m for the immobilized catalases were larger. It was also found that the immobilized catalases had a high affinity with substrate, which demonstrated that the potential of PVA‐Cu(II) chelated nanofibrous membranes applied to enzyme immobilization and biosensors. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Invertase immobilized on spacer‐arm attached poly(hydroxyethyl methacrylate) membrane: Preparation and properties

Microporous poly(2‐hydroxyethyl methacrylate) (pHEMA) membrane was prepared by UV‐initiated photopolymerization. The spacer arm (i.e., hexamethylene diamine) was attached covalently and then invertase was immobilized by the condensation reaction of the amino groups of the spacer arm with carboxyl groups of the enzyme in the presence of carbodiimides. The values of the Michael's constant K_m of invertase were significantly larger (ca. 2.5 times) upon immobilization, indicating decreased affinity by the enzyme for its substrate, whereas V_max was smaller for the immobilized invertase. Immobilization improved the pH stability of the enzyme as well as its temperature stability. Thermal stability was found to increase with immobilization and at 70°C the half times for the activity decay were 12 min for the free enzyme and 41 min for the immobilized enzyme. The immobilized enzyme activity was found to be quite stable in repeated experiments. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1685–1692, 2000     

Immobilization of invertase onto crosslinked poly(p‐chloromethylstyrene) beads

Invertase was immobilized onto poly(p‐chloromethylstyrene) (PCMS) beads that were produced by a suspension polymerization with an average size of 186 μm. The beads had a nonporous but reasonably rough surface. Because of this, a reasonably large external surface area (i.e., 14.1 m²/g) could be achieved with the proposed carrier. A two‐step functionalization protocol was followed for the covalent attachment of invertase onto the bead surface. For this purpose, a polymeric ligand that carried amine groups, polyethylenimine (PEI), was covalently attached onto the bead surface by a direct chemical reaction. Next, the free amine groups of PEI were activated by glutaraldehyde. Invertase was covalently attached onto the bead surface via the direct chemical reaction between aldehyde and amine groups. The appropriate enzyme binding conditions and the batch‐reactor performance of the immobilized enzyme system were investigated. Under optimum immobilization conditions, 19 mg of invertase was immobilized onto each gram of beads with 80% retained activity after immobilization. The effects of pH and temperature on the immobilized invertase activity were determined and compared with the free enzyme. The kinetic parameters K_M and V_M were determined with the Michealis–Menten model. K_M of immobilized invertase was 1.75 folds higher than that of the free invertase. The immobilization caused a significant improvement in the thermal stability of invertase, especially in the range of 55–65°C. No significant internal diffusion limitation was detected in the immobilized enzyme system, probably due to the surface morphology of the selected carrier. This result was confirmed by the determination of the activation energies of both free and immobilized invertases. The activity half‐life of the immobilized invertase was approximately 5 times longer than that of the free enzyme. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1268–1279, 2002     

Covalent immobilization of trypsin onto thermo‐sensitive poly(N‐isopropylacrylamide‐co‐acrylic acid) microspheres with high activity and stability

Poly(N‐isopropylacrylamide‐co‐acrylic acid) (P(NIPAM‐co‐AA)) microspheres with a high copolymerized AA content were fabricated using rapid membrane emulsification technique. The uniform size, good hydrophilicity, and thermo sensitivity of the microspheres were favorable for trypsin immobilization. Trypsin molecules were immobilized onto the microspheres surfaces by covalent attachment. The effects of various parameters such as immobilization pH value, enzyme concentration, concentration of buffer solution, and immobilization time on protein loading amount and enzyme activity were systematically investigated. Under the optimum conditions, the protein loading was 493 ± 20 mg g^?1 and the activity yield of immobilized trypsin was 155% ± 3%. The maximum activity (V_max) and Michaelis constant (K_m) of immobilized enzyme were found to be 0.74 μM s^?1 and 0.54 mM, respectively. The immobilized trypsin showed better thermal and storage stability than the free trypsin. The enzyme‐immobilized microspheres with high protein loading amount still can show a thermo reversible phase transition behavior. The research could provide a strategy to immobilize enzyme for application in proteomics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43343.     

Catalytic potential of a poly(AAc‐co‐HPMA‐cl MBAm)‐matrix‐immobilized lipase from a thermotolerant Pseudomonas aeruginosa MTCC‐4713

A purified alkaline thermo‐tolerant lipase from Pseudomonas aeruginosa MTCC‐4713 was immobilized on a series of five noble weakly hydrophilic poly(AAc‐co‐HPMA‐cl MBAm) hydrogels. The hydrogel synthesized by copolymerizing acrylic acid and 2‐hydroxy propyl methacrylate in a ratio of 5 : 1 (HG_5:1 matrix) showed maximum binding efficiency for lipase (95.3%, specific activity 1.96 IU mg^?1 of protein). The HG_5:1 immobilized lipase was evaluated for its hydrolytic potential towards p‐NPP by studying the effect of various physical parameters and salt‐ions. The immobilized lipase was highly stable and retained ～92% of its original hydrolytic activity after fifth cycle of reuse for hydrolysis of p‐nitrophenyl palmitate at pH 7.5 and temperature 55°C. However, when the effect of pH and temperature was studied on free and bound lipase, the HG_5:1 immobilized lipase exhibited a shift in optima for pH and temperature from pH 7.5 and 55°C to 8.5 and 65°C in free and immobilized lipase, respectively. At 1 mM concentration, Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions promoted and Co²⁺ ions inhibited the hydrolytic activities of free as well as immobilized lipase. However, exposure of either free or immobilized lipase to any of these ions at 5 mM concentration strongly increased the hydrolysis of p‐NPP (by ～3–4 times) in comparison to the biocatalysts not exposed to any of the salt ions. The study concluded that HG_5:1 matrix efficiently immobilized lipase of P. aeruginosa MTCC‐4713, improved the stability of the immobilized biocatalyst towards a higher pH and temperature than the free enzyme and interacted with Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions to promote rapid hydrolysis of the substrate (p‐NPP). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4252–4259, 2006     

Covalent immobilization of naringinase for the transformation of a flavonoid

Naringinase (EC 3.2.1.40) from Penicillium sp was immobilized by covalent binding to woodchips to improve its catalytic activity. The immobilization of naringinase on glutaraldehyde‐coated woodchips (600 mg woodchips, 10 U naringinase, 45 °C, pH 4.0 and 12h) through 1% glutaraldehyde cross‐linking was optimized. The pH–activity curve of the immobilized enzyme shifted toward a lower pH compared with that of the soluble enzyme. The immobilization caused a marked increase in thermal stability of the enzyme. The immobilized naringinase was stable during storage at 4 °C. No loss of activity was observed when the immobilized enzyme was used for seven consecutive cycles of operations. The efficiency of immobilization was 120%, while soluble naringinase afforded 82% efficacy for the hydrolysis of standard naringin under optimal conditions. Its applicability for debittering kinnow mandarin juice afforded 76% debittering efficiency. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of PMMA composites activated with starch for immobilization of L‐asparaginase

Poly (methyl methacrylate) (PMMA)–starch composites were prepared by emulsion polymerization technique for L‐asparaginase (L‐ASNase) immobilization as highly activated support. The hydroxide groups on the prepared composites offer a very simple, mild and firm combination for enzyme immobilization. The pure PMMA and PMMA‐starch composites were characterized as structural, thermal and morphological. PMMA‐starch composites were found to have better thermal stability and more hydrophilic character than pure PMMA. L‐ASNase was immobilized onto PMMA‐starch composites contained the different ratio of starch (1, 3, 5, and 10 wt %). Immobilized L‐ASNase showed better performance as compared to the native enzyme in terms of thermal stability and pH. K_m value of immobilized enzyme decreased approximately eightfold compared with the native enzyme. In addition to, immobilized L‐ASNase was found to retain 60% of activity after 1‐month storage period at 4 °C. Therefore, PMMA‐starch composites can be provided more advantageous in terms of enzymatic affinity, thermal, pH and storage stability as L‐ASNase immobilization matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43421.     

Urease immobilization on an ion‐exchange textile for urea hydrolysis

Ion‐exchange textiles are used as organic supports for urease immobilization with the aim of developing reactive fibrous materials able to promote urea removal. A non‐woven, polypropylene‐based cation‐exchange textile was prepared using UV‐induced graft polymerization. Urease was covalently immobilized onto the cation‐exchange textile using three different coupling agents: N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride (EDC), N‐cyclohexyl‐N′‐(b‐[N‐methylmorpholino]ethyl)carbodiimide p‐toluenesulfonate (CMC), and glutaraldehyde (GA). The immobilized biocatalyst was characterized by means of FT‐IR spectrometry, SEM micrographs, dependence of the enzyme activity on pH and temperature, and according to the kinetic constants of the free and immobilized ureases. The biotextile prepared with EDC in the presence of N‐hydroxysuccinimide performs best. The optimum pH was 7.2 for the free urease and 7.6 for the immobilized ureases. The reactivity was maximal at 45 °C for free urease, 50 °C for biotextiles prepared using EDC or CMC, and 55 °C for biotextiles prepared with GA. The activation energy for the immobilized ureases was 4.73–5.67 kcal mol^?1, which is somewhat higher than 4.3 kcal mol^?1 for free urease. The urea conversion for a continuous‐flow immobilized urease reactor is nearly as good as a continuously stirred tank reactor having a much longer residence time, suggesting that the packed bed reactor had sufficient diffusive mixing and residence time to reach nearly optimal results. Urease immobilized on a biotextile using EDC has good storage and operational stability. Copyright © 2006 Society of Chemical Industry     

Immobilization of horseradish peroxidase on electrospun poly(vinyl alcohol)–polyacrylamide blend nanofiber membrane and its use in the conversion of phenol

Electrospun nanofibers, with their porous structures, high surface-to-volume ratio, and good mechanical properties, are used as a support material for enzyme immobilization. In this study, the poly(vinyl alcohol) and polyacrylamide bicomponent (PVA–PAAm) nanofibers were fabricated via the electrospinning method. Synthesized PAAm was characterized with size exclusion chromatography (SEC). Nanofibers were characterized by fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscope (SEM). DSC and TGA analyses showed that the nanofibers were more durable than PVA and PAAm polymers. SEM images demonstrated that all nanofibers possessed uniform and smooth structures (average diameter about 300 nm). FTIR results have shown that PAAm successfully participates in nanofiber structure. The produced nanofibers were used as support material for covalent immobilization of horseradish peroxidase (HRP). The optimum temperature for free HRP was 45 °C, whereas it was 50 °C for the immobilized enzyme. The immobilized HRP showed better storage and thermal stability than free HRP. The kinetic parameters (K _m and V _max) were found to be 2.42 mM and 0.027 U for the immobilized HRP and 1.86 mM and 0.079 U for the free HRP, respectively. The immobilized enzyme could be used effectively for 25 cycles with 54% retention of the activity. The immobilized HRP was also used for the conversion of phenol. Phenol removal was found to be about 29.68% at 180 min in real wastewater. The novel PVA–PAAm nanofibrous material was successfully used as a support material for covalent immobilization of HRP. Immobilized enzymes such as oxido-reductases onto the PVA–PAAm bicomponent nanofiber could be recommended in the treatment of organic pollutants in industrial effluents.

     

Chemoselective hydrolysis of methyl 2‐acetoxybenzoate using free and entrapped esterase in K‐carrageenan beads

Porcine liver esterase was entrapped in natural polysaccharides K‐carrageenan and retention of its activity was determined using p‐nitrophenyl acetate as the substrate. The optimum pH for esterase activity of entrapped enzyme showed a little shift towards acidic side. Immobilized enzyme showed improved thermal and storage stability. The entrapped esterase retained 50% of its activity after eight repetitive cycles. Michaelis constant K_m for the free and entrapped enzymes was almost same indicting no conformational change during immobilization. Maximum velocity V_max was observed to decrease on immobilization. The free and entrapped esterase was used for selective hydrolysis of methyl 2‐acetoxybenzoate to methyl 2‐hydroxybenzoate in batch process as well as in a fixed bed reactor. The hydrolysis was observed to be 99% within 2 h for free as well as immobilized enzyme in batch process. The rate of hydrolysis was found to depend on pH. The turn over number of selective hydrolysis in batch and fixed bed reactor was 3.08 × 10⁶ and 1.19 × 10⁷, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Stabilization of penicillin V acylase from Streptomyces lavendulae by covalent immobilization

Penicillin V acylase from the actinomycete Streptomyces lavendulae ATCC 13664 has been immobilized to epoxy‐activated acrylic beads (Eupergit C®) by covalent binding. Further linkage of bovine serum albumin after enzyme immobilization was carried out in order to remove the remaining oxirane groups of the support. The obtained immobilized biocatalyst displayed double exponential deactivation kinetics at temperatures below 55 °C, while the native enzyme followed single exponential decay at the same temperatures. We concluded that soluble penicillin acylase was deactivated in one step, whereas the immobilized enzyme showed an enzymatic intermediate state which is highly thermostable. As a consequence of the immobilization process, the enzyme displayed a 10‐fold increase in its half‐life at 40 °C. At this temperature, the enzymatic intermediate state was progressively destabilized as the pH of the medium was increased. Thus, the optimum pH range for the immobilized enzyme preparation was established as being from 7.0 to 8.0. Higher pH values led to quicker enzyme deactivation. © 2001 Society of Chemical Industry