Extended focused imaging for digital holograms of macroscopic three-dimensional objects

When a digital hologram is reconstructed, only points located at the reconstruction distance are in focus. We have developed a novel technique for creating an in-focus image of the macroscopic objects encoded in a digital hologram. This extended focused image is created by combining numerical reconstructions with depth information extracted by using our depth-from-focus algorithm. To our knowledge, this is the first technique that creates extended focused images of digital holograms encoding macroscopic objects. We present results for digital holograms containing low- and high-contrast macroscopic objects.     

Application of the correlation coefficient method for determination of the focal plane to digital particle holography

The correlation coefficient (CC) method, which was proposed by our research group, is applied to digital particle holography to locate the focal plane of particles. It uses the fact that the CC is maximum at the focal plane. The factors influencing this method are discussed with a numerical simulation of holograms. For real holograms, the Wiener filter was proposed to process both recorded holograms and reconstructed images. The application results using the dot array target showed that the Wiener filter is a very effective tool for processing holography-related images. The effects of the dot size and the object distance on the errors in the determination of the focal plane by the CC method were investigated by using the calibration target.     

Reconstruction dynamics of recorded holograms in photochromic glass

We have investigated the dynamics of the record-erase process of holograms in photochromic glass using continuum Nd:YVO? laser radiation (λ=532 nm). A bidimensional microgrid pattern was formed and visualized in photochromic glass, and its diffraction efficiency decay versus time (during reconstruction step) gave us information (D, Δn) about the diffusion process inside the material. The recording and reconstruction processes were carried out in an off-axis setup, and the images of the reconstructed object were recorded by a CCD camera. Measurements realized on reconstructed object images using holograms recorded at a different incident power laser have shown a two-stage process involved in silver atom kinetics.     

Quantization noise and its reduction in lensless Fourier digital holography

Digital holography is an imaging technique that enables recovery of topographic 3D information about an object under investigation. In digital holography, an interference pattern is recorded on a digital camera. Therefore, quantization of the recorded hologram is an integral part of the imaging process. We study the influence of quantization error in the recorded holograms on the fidelity of both the intensity and phase of the reconstructed image. We limit our analysis to the case of lensless Fourier off-axis digital holograms. We derive a theoretical model to predict the effect of quantization noise and we validate this model using experimental results. Based on this, we also show how the resultant noise in the reconstructed image, as well as the speckle that is inherent in digital holography, can be conveniently suppressed by standard speckle reduction techniques. We show that high-quality images can be obtained from binary holograms when speckle reduction is performed.     

High resolution digital holographic microscopy with a wide field of view based on a synthetic aperture technique and use of linear CCD scanning

Theoretical analysis shows that, to improve the resolution and the range of the field of view of the reconstructed image in digital lensless Fourier transform holography, an effective solution is to increase the area and the pixel number of the recorded digital hologram. A new approach based on the synthetic aperture technique and use of linear CCD scanning is presented to obtain digital holographic images with high resolution and a wide field of view. By using a synthetic aperture technique and linear CCD scanning, we obtained digital lensless Fourier transform holograms with a large area of 3.5 cm x 3.5 cm (5000 x 5000 pixels). The numerical reconstruction of a 4 mm object at a distance of 14 cm by use of a Rayleigh-Sommerfeld integral shows that a theoretically minimum resolvable distance of 2.57 microm can be achieved at a wavelength of 632.8 nm. The experimental results are consistent with the theoretical analysis.     

Compression defects in different reconstructions from phase-shifting digital holographic data

Three principal strategies for the compression of phase-shifting digital holograms (interferogram domain-, hologram domain-, and reconstruction domain-based strategies) are reviewed and their effects in the reconstruction domain are investigated. Images of the reconstructions are provided to visually compare the performances of the methods. In addition to single reconstructions the compression effects on different depth reconstructions and reconstructions corresponding to different viewing angles are investigated so that a range of the 3D aspects of the holograms may be considered. Although comparable at low compression rates, it is found that depth and perspective information is degraded in different ways with the different techniques at high compression rates. A hologram of an object with sufficient details at different depths is used so that both parallax and depth effects can be illustrated.     

Improvement of color reproduction in color digital holography by using spectral estimation technique

We propose a color digital holography by using spectral estimation technique to improve the color reproduction of objects. In conventional color digital holography, there is insufficient spectral information in holograms, and the color of the reconstructed images depend on only reflectances at three discrete wavelengths used in the recording of holograms. Therefore the color-composite image of the three reconstructed images is not accurate in color reproduction. However, in our proposed method, the spectral estimation technique was applied, which has been reported in multispectral imaging. According to the spectral estimation technique, the continuous spectrum of object can be estimated and the color reproduction is improved. The effectiveness of the proposed method was confirmed by a numerical simulation and an experiment, and, in the results, the average color differences are decreased from 35.81 to 7.88 and from 43.60 to 25.28, respectively.     

Digitized holography: modern holography for 3D imaging of virtual and real objects

Recent developments in computer algorithms, image sensors, and microfabrication technologies make it possible to digitize the whole process of classical holography. This technique, referred to as digitized holography, allows us to create fine spatial three-dimensional (3D) images composed of virtual and real objects. In the technique, the wave field of real objects is captured in a wide area and at very high resolution using the technique of synthetic aperture digital holography. The captured field is incorporated in virtual 3D scenes including two-dimensional digital images and 3D polygon mesh objects. The synthetic field is optically reconstructed using the technique of computer-generated holograms. The reconstructed 3D images present all depth cues like classical holograms but are digitally editable, archivable, and transmittable unlike classical holograms. The synthetic hologram printed by a laser lithography system has a wide viewing zone in full-parallax and give viewers a strong sensation of depth, which has never been achieved by conventional 3D systems. A real hologram as well as the details of the technique is presented to verify the proposed technique.     

Fast computation for generating CGH of a 3D object by employing connections between layers

An approximate method for generating computer-generated holograms (CGH) of a 3D object with six times faster speed than the conventional algorithm is presented. In the conventional algorithm, a 3D object is sliced into many layers and treated as a collection of self-illuminated point light source. The propagation process of a light ray from every point of an object to all the points on the hologram plane is simulated and interfered with by the reference beam to form a CGH. In our proposed method, under the assumption that the depth of a 3D object is much smaller than the recording distance, we just need to calculate the oblique distance between the first layer and the hologram plane, and then the oblique distances from the other layers to the hologram plane can be obtained from a simple relation, thus the computational time is much reduced. The CGH is optically reconstructed and the quality of the reconstructed image agrees well with that from the conventional algorithm.     

In-line hologram reconstruction using Hartley transform

In reconstruction of in-line recorded holograms, zero-order and conjugate images appear on the same physical location as the object image. Here we propose a method, new to our knowledge, to separate the object image from the others by using two quadrature phase-shifted holograms. The method uses the Hartley transform and a phase retrieval type of algorithm on the difference hologram.     

Submicrometer optical tomography by multiple-wavelength digital holographic microscopy

We present a method for submicrometer tomographic imaging using multiple wavelengths in digital holographic microscopy. This method is based on the recording, at different wavelengths equally separated in the k domain, in off-axis geometry, of the interference between a reference wave and an object wave reflected by a microscopic specimen and magnified by a microscope objective. A CCD camera records the holograms consecutively, which are then numerically reconstructed following the convolution formulation to obtain each corresponding complex object wavefront. Their relative phases are adjusted to be equal in a given plane of interest and the resulting complex wavefronts are summed. The result of this operation is a constructive addition of complex waves in the selected plane and destructive addition in the others. Tomography is thus obtained by the attenuation of the amplitude out of the plane of interest. Numerical variation of the plane of interest enables one to scan the object in depth. For the presented simulations and experiments, 20 wavelengths are used in the 480-700 nm range. The result is a sectioning of the object in slices 725 nm thick.     

Short Communication

The fidelity of reconstruction of 3-dimensional images by reflection and transmission holograms is investigated, concentrating on the measurement and theoretical modelling of large-scale geometric distortions in holograms illuminated by white or monochromatic light. Variable parameters include: recording and replay wavelengths; object position at recording; emulsion thickness and refractive index; replay light-source angle and distance; presence of a glass substrate, its thickness and refractive index. Holograms were recorded on Agfa 8E56HD photographic plates, and measurements made of image-point directions as a function of position on the hologram, revealing considerable image distortions even for modest changes in parameter values between recording and replay. The results are accurately modelled by the theory, which gives numerical values for point-by-point image positions, without any resort to paraxial approximations.     

基于改进双流卷积递归神经网络的RGB-D物体识别方法

为了提高基于图像的物体识别准确率,提出一种改进双流卷积递归神经网络的RGB-D物体识别算法(Re-CRNN).将RGB图像与深度光学信息结合,基于残差学习对双流卷积神经网络(CNN)进行改进:增加顶层特征融合单元,在RGB图像和深度图像中学习联合特征,将提取的RGB和深度图像的高层次特征进行跨通道信息融合,继而使用So...     

Three-dimensional color holographic display

Three-dimensional (3D) color holograms are recorded in a cerium-doped, strontium barium niobate (SBN:60) photorefractive crystal. These holograms are shown to reconstruct true color reproductions of the original object with an observable field of view of 37 degrees . Angle multiplexing of two or more 3D color holograms is also demonstrated with angle tuning of the reference beam corresponding to a separation angle between stored images of 0.082 degrees . Each of these results is compared with corresponding theoretical predictions.     

Simultaneous measurement of in-plane and out-of-plane displacement derivatives using dual-wavelength digital holographic interferometry

The paper introduces a method for simultaneously measuring the in-plane and out-of-plane displacement derivatives of a deformed object in digital holographic interferometry. In the proposed method, lasers of different wavelengths are used to simultaneously illuminate the object along various directions such that a unique wavelength is used for a given direction. The holograms formed by multiple reference-object beam pairs of different wavelengths are recorded by a 3-color CCD camera with red, green, and blue channels. Each channel stores the hologram related to the corresponding wavelength and hence for the specific direction. The complex reconstructed interference field is obtained for each wavelength by numerical reconstruction and digital processing of the recorded holograms before and after deformation. Subsequently, the phase derivative is estimated for a given wavelength using two-dimensional pseudo Wigner-Ville distribution and the in-plane and out-of-plane components are obtained from the estimated phase derivatives using the sensitivity vectors of the optical configuration.     

Holographic Methods of Visualization and Measurement in Engineering

Holographic recording has advantages over other techniques of information storage in that a means is provided for reconstructing amplitude and phase distributions, for reconstructing three dimensional images, and for presenting differential effects resulting from the interaction of situations which did not exist simultaneously.

Examples are given of the use of holography as an intermediate step in photographic recording.

Two examples are also included of the possibility of making and using holograms with only simple means.     

Three-dimensional Displacement Analysis by Windowed Phase-shifting Digital Holographic Interferometry

Abstract:  Phase-shifting digital holography is a new method for measuring the displacement distribution on the surface of an object. The authors previously proposed a windowed phase-shifting digital holographic interferometry (windowed PSDHI). This method provides accurate displacement distributions by decreasing the effect of speckle patterns. In this study, the method is extended to analyse three-dimensional displacement components in a microscope. Three object laser beams in the optical system are used. Four phase-shifted holograms are recorded for each object laser beam. The complex amplitude of each reconstructed light at the object is calculated by the Fresnel diffraction integral of the complex amplitude of the hologram. The reconstructed distance is obtained at the point with the maximum of the standard deviation of the intensities of the object reconstructed with changing the reconstruction distance. The three phase-difference values between before and after deformation provide the three-dimensional displacement components. Theoretical treatment and experimental results of three-dimensional displacement measurement using this method are shown.     

Volume holographic imaging in transmission geometry

We address the performance of transmission geometry volume holograms as depth-selective imaging elements. We consider two simple implementations using holograms recorded with spherical and plane beams. We derive the point-spread function (PSF) of these systems using volume diffraction theory and use the PSF to estimate depth resolution. Furthermore, we show that appropriately designed objective optics can significantly improve the depth resolution or the working distance of plane-wave reference holographic imaging systems. These results are confirmed experimentally and demonstrated for objects with millimeter axial features, imaged from the 5- to 50-cm range.     

Effects of quantization in phase-shifting digital holography

We discuss quantization effects of hologram recording on the quality of reconstructed images in phase-shifting digital holography. We vary bit depths of phase-shifted holograms in both numerical simulation and experiments and then derived the complex amplitude, which is subjected to Fresnel transformation for the image reconstruction. The influence of bit-depth limitation in quantization has been demonstrated in a numerical simulation for spot-array patterns with linearly varying intensities and a continuous intensity object. The objects are provided with uniform and random phase modulation. In experiments, digital holograms are originally recorded at 8 bits and the bit depths are changed to deliver holograms at bit depths of 1 to 8 bits for the image reconstruction. The quality of the reconstructed images has been evaluated for the different quantization levels.     

Calculation of holograms from elemental images captured by integral photography

We describe a method in which holograms can be produced by calculation from images captured by integral photography (IP). We present a basic algorithm obtained by simulating IP reconstruction, in which conditions are set so as not to cause aliasing in the holograms after the calculations. To reduce the calculation load, we also propose a way to limit the range of calculation considering the distribution of light and a way to shift the optical field on the exit plane of microlenses in a lens array. Finally, by optical experiments, we confirm that three-dimensional images can be reconstructed from holograms calculated from an integral photograph of a real object captured with an IP camera.