Progress in Critical Current Density (<Emphasis Type="Italic">J</Emphasis><Subscript><Emphasis Type="Italic">c</Emphasis></Subscript>) in Sintered MgB<Subscript>2</Subscript> Bulks

The present paper focuses on methods of further improving the flux pinning and critical current density of disk-shaped MgB₂ bulk superconductors by adding excess Mg metal in combination with an optimum silver content and optimized processing conditions. Bulk MgB₂ samples were produced by in situ solid-state reaction in Ar gas ambient using high purity commercial powders of Mg metal and 1.5 wt% carbon-coated amorphous B powders mixed in a fixed ratio of Mg/B = 1.1:2. Further, 4 wt% silver was added to improve flux pinning as well as mechanical performance of the bulk MgB₂ material. The magnetization measurements confirmed a sharp superconducting transition with T_c,onset at around 37 K, which is only by 1 K lower than in bulk MgB₂ material produced without carbon-coated amorphous boron. The critical current density (J_c) values significantly improved in the MgB₂ material with 4 wt% of silver and 1.5 wt% of carbon-coated amorphous boron, sintered at 775 ^°C for 3 h. At 20 K, this sample showed J_c at around 500 and 350 kA/cm² in the self-field and 1 T, respectively, which makes it suitable for several industrial applications.     

Superconductivity in Ca<Subscript>0.5</Subscript>La<Subscript>0.5</Subscript>FBiSe<Subscript>2</Subscript>

Through the measurement of resistivity, magnetic susceptibility, and Hall effect, we discovered a novel BiSe₂-based superconductor Ca_0.5La_0.5FBiSe₂ with T _c of 3.9 K. A strong diamagnetic signal below T _c in susceptibility χ(T) is observed indicating the bulk superconductivity. The negative Hall coefficient throughout the whole temperature regime implies the dominant electron-type carriers in the sample. Different to most of BiS₂-based compounds where superconductivity develops from a semiconducting-like normal state, its resistivity in the present compound exhibits a metallic behavior down to T _c . Together with the enhanced T _c , the metallic character of the normal state implies that the electronic structure of Ca_0.5La_0.5FBiSe₂ may be different to those in the other BiS₂-based compounds.     

Inducement of Itinerant Electron Transport in Charge-Ordered Pr<Subscript>0.6</Subscript>Ca<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript> by Ba Doping

The effects of Ba ²⁺ doping on the electrical and magnetic properties of charge-ordered Pr_0.6Ca_0.4MnO₃ were investigated through electrical resistivity and AC susceptibility measurements. X-ray diffraction data analysis showed an increase in unit cell volume with increasing Ba ²⁺ content indicating the possibility of substituting Ba ²⁺ for the Ca-site. Electrical resistivity measurements showed insulating behavior and a resistivity anomaly at around 220 K. This anomaly is attributed to the existence of charge ordering transition temperature, \(T^{\mathrm {R}}_{\text {CO}}\) for the x = 0 sample. The Ba-substituted samples exhibited metallic to insulator transition (MI) behavior, with transition temperature, T _MI, increasing from ～98 K (x = 0.1) to ～122 K (x = 0.3). AC susceptibility measurements showed ferromagnetic to paramagnetic (FM-PM) transition for Ba-substituted samples with FM-PM transition temperature, T _c, increasing from ～121 K (x = 0.1) to ～170 K (x = 0.3), while for x = 0, an antiferromagnetic to paramagnetic transition behavior with transition temperature, T _N, ～170 K was observed. In addition, inverse susceptibility versus T plot showed a deviation from the Curie–Weiss behavior above T _c, indicating the existence of the Griffiths phase with deviation temperature, T _G, increasing from 160 K (x = 0.1) to 206 K (x = 0.3). Magnetoresistance, MR, behavior indicates intrinsic MR mechanism for x = 0.1 which changed to extrinsic MR for x > 0.2 as a result of Ba substitution. The weakening of charge ordering and inducement of ferromagnetic metallic (FMM) state as well as increase in both T _c and T _MI are suggested to be related to the increase of tolerance factor, τ, and increase of e _g ?electron bandwidth as average ionic radius at A-site, <r _A> increased with Ba substitution. The substitution may have reduced MnO₆ octahedral distortion and changed the Mn–O–Mn angle which, in turn, promotes itinerancy of charge carrier and enhanced double exchange mechanism. On the other hand, increase in A-site disorder, which is indicated by the increase in σ ² is suggested to be responsible for the widening of the difference between T _c and T _MI.     

Superconducting Properties of NdO<Subscript>0.5</Subscript><Emphasis Type="Bold">F</Emphasis><Subscript>0.5</Subscript>BiS<Subscript>2</Subscript> Single Crystals

We report on superconducting properties of high-quality single crystals of F-substituted NdOBiS₂ using low-temperature magnetization and transport measurements. Using the mixture of CsCl and KCl as the flux, we have synthesized our single crystals. This compound exhibits bulk superconductivity with a transition temperature of about T _c～4.6 K. The critical current density J _c as a function of temperature has been derived and decreases with the increasing temperature. We construct the phase diagram H _c2(T). The zero-temperature value for \(H_{\mathrm {c2}}^{B\parallel c}\) for value for \(T_{c}^{90~\%}\) and \(T_{c}^{0~\%}\) is estimated to be approximately 2.17 and 1.72 T respectively by using Werthamer-Helfand-Hohenberg model.     

Structural and Thermal Validations of Y<Subscript>3</Subscript>Ba<Subscript>5</Subscript>Cu<Subscript>8</Subscript>O<Subscript>18</Subscript> Composites Synthesized via Citrate Sol-Gel Spontaneous Combustion Method

The fabrication of single-phase superconductors enabled promising advancements in a wide range of technological applications. Numerous parameters including processing temperature, thermal cycle, chemical composition, doping, and atmosphere will be carefully addressed and optimized. This paper investigates phase stability and compound formation of Y₃Ba₅Cu₈O_y (Y-358) preform powders which were sintered at different temperatures. The precursor powder synthesized via chemical route and employing spontaneous combustion technique, respectively. The presence of Y-358 and YBa₂Cu₃O_7-δ (Y-123) phases in composites sintered at different temperatures with varied phase fractions were further confirmed through Rietveld refinement. The formation of Y-123 phase is dominant in all samples and composite was sintered at 900 °C, which was exhibited higher as compared to Y-358 phase content. The decomposition of different phases present in the composites and reaction temperatures were investigated with simultaneous differential thermal and thermogravimetry analysis.     

Appearance of Superconductivity at 15.9 K in Layered V<Subscript>2</Subscript>AlN

A bulk polycrystalline sample with the nominal compositions represented by V₂AlN_1?δ was synthesized by a two-step solid-state reaction. The structural characterization has been done via X-ray diffraction, followed by Rietveld refinements, which revealed that the layered V₂AlN is crystalized in cubic Fm3m space group with lattice parameters a = b = c = 6.127 Å. Both DC resistivity and magnetization measurements confirmed that V₂AlN is a bulk superconductor with superconducting transition temperature (T _c ) of 15.9 K.     

Anomalous Impact of Hydrostatic Pressure on Superconductivity of Polycrystalline LaO<Subscript>0.5</Subscript>F<Subscript>0.5</Subscript>BiSe<Subscript>2</Subscript>

We report bulk superconductivity at 2.5 K in LaO_0.5F_0.5BiSe₂ compound through the DC magnetic susceptibility and electrical resistivity measurements. The synthesized LaO_0.5F_0.5BiSe₂ compound is crystallized in tetragonal structure with space group P4/nmm and Reitveld refined lattice parameters are a = 4.15(1) Å and c = 14.02(2) Å. The lower critical field of H _c1 = 40 Oe, at temperature 2 K is estimated through the low field magnetization measurements. The LaO_0.5F_0.5BiSe₂ compound showed metallic normal state electrical resistivity with residual resistivity value of 1.35 m Ω cm. The compound is a type-II superconductor, and the estimated H _c2(0) value obtained by WHH formula is above 20 kOe for 90 % ρ _n criteria. The superconducting transition temperature decreases with applied pressure till around 1.68 GPa and with further higher pressures a high- T _c phase emerges with possible onset T _c of above 5 K for 2.5 GPa.     

Methods of Extracting Current Density Dependence of the Effective Activation Energy <Emphasis Type="Italic">U</Emphasis><Subscript>eff</Subscript>(J) in High <Emphasis Type="Italic">T</Emphasis><Subscript>c</Subscript> Superconductors

We have reviewed the methods of extracting current density dependence of the effective activation energy U_eff(J) from experimental data, including transport measurements and magnetic relaxations. Then we applied the method proposed by Maley etc. on our single-phase HgBaCaCuO-1223 sample to obtain the effective activation energy. The effective activation energy U_eff(J, H = 1~T) is extracted from the magnetization relaxation data. On the other hand, U_eff(J) can be theoretically estimated for the model of a sinusoidal washboard potential in superconductors. By comparing the two results we believe that the single curve obtained in the former way can be seen as real current density dependence of effective activation energy U_eff(J). In addition, we have analyzed the reasons why the magnetic decay data at various temperatures can be scaled onto a single curve. The pinning mechanism in the measured temperature range does not change, and the activation energy depends separately on the three variables: T, B, and J are thought as two important factors for this. In the temperature close to zero and near T_c, thermally assisted flux motion would no longer valid since other processes predominate.     

Influence of coronene addition on some superconducting properties of bulk MgB<Subscript>2</Subscript>

This study reports the effect of coronene (C₂₄H₁₂) addition on some superconducting properties such as critical temperature (T_c), critical current density (J_c), flux pinning force density (F_p), irreversibility field (H_irr), upper critical magnetic field (H_c2), and activation energy (U₀), of bulk MgB₂ superconductor by means of magnetisation and magnetoresistivity measurements. Disk-shaped polycrystalline MgB₂ samples with varying C₂₄H₁₂ contents of 0, 2, 4, 6, 8, 10 wt%, were produced at 850 °C in Ar atmosphere. The obtained results show an increase in field-J_c values at 10 and 20 K resulting from the strengthened flux pinning, and a decrease in critical temperature (T_c) because of C substitution into MgB₂ lattice, with increasing amount of C₂₄H₁₂ powder. The H_c2(0) and H_irr(0) values are respectively found as 144, 181, 172 kOe, and 128, 161, 145 kOe for pure, 4 wt% and 10 wt% C₂₄H₁₂ added samples. The U₀ depending on the magnetic field curves were plotted using thermally activated flux flow model. The maximum U₀ values are respectively obtained as 0.20, 0.23 and 0.12 eV at 30 kOe for pure, 4 wt% and 10 wt% C₂₄H₁₂ added samples. As a result, the superconducting properties of bulk MgB₂ at high fields was improved using C₂₄H₁₂, active carbon source addition, because of the presence of uniformly dispersed C particles with nanometer order of magnitude, and acting as effective pinning centres in MgB₂ structure.     

Effect of preparation conditions on the optical and photoluminescent properties of glassy As<Subscript>2</Subscript>S<Subscript>3</Subscript>

We have studied the 77-K photoluminescent properties of As₂S₃ semiconducting glass prepared at different temperatures (T ₁ = 870 K; T ₂ = 1120 K; T ₃ = 1370 K) and cooling rates (v ₁ = 10^?2 K/s, v ₂ = 1.5 K/s, v ₃ = 1.5 × 10² K/s). The results demonstrate that the structural, optical, and photoluminescent properties of semiconducting chalcogenide glasses can be tuned over a considerable range by varying the preparation conditions.     

Investigation of Magnetic,Magnetocaloric, and Critical Properties of La<Subscript>0.5</Subscript>Ba<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript> Manganite

We present an extensive study of the magnetic properties of a novel La_0.5Ba_0.5MnO₃ perovskite material prepared by the hydrothermal method. The explored sample was structurally studied by the x-ray diffraction (XRD) method which confirms the formation of a pure cubic phase of a perovskite structure with Pm3m space group. The magnetic properties were probed by employing temperature M (T) and external magnetic field M (μ_oH) dependence of magnetization measurements. A magnetic phase transition from ferromagnetic to paramagnetic phase occurs at 339 K in this sample. The maximum magnetic entropy change (\(\left | {{\Delta } S}_{M}^{\max } \right |\)) took a value of 1.4 J kg^??1 K^??1 at the applied magnetic field of 4.0 T for the explored sample and has also been found to occur at Curie temperature (T_C). This large entropy change might be instigated from the abrupt reduction of magnetization at T_C. The magnetocaloric effect (MCE) is maximum at T_C as represented by M (μ_oH) isotherms. The relative cooling power (RCP) is 243.2 J kg^??1 at μ_oH =?4.0 T. Moreover, the critical properties near T_C have been probed from magnetic data. The critical exponents δ, β, and γ with values 3.82, 0.42, and 1.2 are close to the values predicted by the 3D Ising model. Additionally, the authenticity of the critical exponents has been confirmed by the scaling equation of state and all data fall on two separate branches, one for T < T_C and the other for T > T_C, signifying that the critical exponents obtained in this work are accurate.     

High-temperature crystal chemistry of Na<Subscript>6</Subscript>(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>O(MoO<Subscript>4</Subscript>)<Subscript>4</Subscript>

Thermal deformations of Na₆(UO₂)₂O(MoO₄)₄ were studied by high-temperature powder X-ray diffraction. The compound crystallizes in the triclinic system, space group Р\(\bar 1\), a = 7.636(7), b = 8.163(6), c = 8.746(4) Å, α = 72.32(9)°, β = 79.36(4)°, γ = 65.79(5)°, V = 472.74(4) ų. It is stable in the temperature interval 20–700°С. The thermal expansion coefficients (TECs) are α₁₁ = 25.5 × 10^–6, α₂₂ = 7.8 × 10^–6, and α₃₃ = 1.1 × 10^–6 (°C)^–1. The orientation of the TEC pattern relative to the crystallographic axes is a₃₃^Z = 45°, a₃₃^X = 122°, a₂₂^Z = 59°, and a₂₂^X = 66°. The anisotropy of the thermal expansion is due to specific features of the crystal structure of the compound.     

Photoluminescence of Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>:Eu nanocrystals

The photoluminescence (PL) of Ga₂S₃-5 mol % Eu₂O₃ nanocrystals prepared by mechanical comminution of the initial compound has been studied in the temperature range from 77 to 300 K. It is established that the PL spectrum of nanocrystals, in comparison to that of a massive sample, extends over a broader wavelength interval (430–620 nm) and has two maxima (at 507 and 556 nm) instead of one. The intensity of emission from nanocrystals is significantly higher than that from the massive crystal. The halfwidth in both cases varies with the temperature in proportion to T ^1/2. The intensity of emission at 556 nm for nanocrystals depends on the temperature as lgI ～ 1/T, this dependence having three linear portions corresponding to an activation energy of 0.04, 0.16, and 0.43 eV. The PL bands with maxima at 507 and 556 nm are assigned to the intracenter 4f ⁶5d4f ⁷ transitions in Eu²⁺ ions.     

Formation of High-Field Pinning Centers in Superconducting MgB<Subscript>2</Subscript> Wires by Using High Hot Isostatic Pressure Process

This paper demonstrates the effects of hot isostatic pressure (HIP) on the structure and transport critical parameters of in situ MgB₂ wires without a barrier. Our results show that only HIP and nano-boron allow the formation of more high-field pinning centers, which lead to the increase in critical current density (J _c) at high applied magnetic fields. Nano-boron and annealing at a low pressure increase the J _c in the low magnetic field. This indicates that nano-particles create more high-field pinning centers. In addition, the results show that nano-boron improves the connection between the grains. Scanning electron microscope results show that HIP increases the reaction rate between Mg and B, density, and homogeneity of the MgB₂ material. Additionally, HIP allows to create a structure with small grains and voids and eliminates the significance of the number of voids. High isostatic pressure allows to obtain high J _c of 10 A/mm² (at 4.2 K) in 10 T and increases irreversible magnetic field (B _irr) and upper critical field (B _c2). Measurements show that these wires have high critical temperature of 37 K.     

Effect of Cooling Rate on Structure,Composition, and Superconducting Properties of FeTe<Subscript>0.6</Subscript>Se<Subscript>0.4</Subscript> Prepared by Self-Flux Technique

We have reported the synthesis and characterization of FeTe_0.6Se_0.4 prepared by self-flux technique with two different cooling rates, namely 0.8 and 4.5^°C/h. The effect of cooling rate on the samples has been characterized by using scanning electron microscopy (SEM) together with energy dispersive X-ray (EDX) spectrometer, X-ray diffraction (XRD), magnetization and magnetic hysteresis techniques. Four strong peaks were observed in the powder XRD patterns of both samples corresponding to the reflected intensities from the (001), (002), (003), and (004) planes of the tetragonal structure having space group P4/nmm. However, sample 2 has extra peaks corresponding to various non-superconducting binary phases of FeSe and FeTe. It can be concluded that the multiphase behavior of system increases with increasing cooling rate. The critical current value at 5 K, J _c (0), deduced from the M ? H loops is approximately 5.6 × 10⁴ A/cm² for sample 1 and 7.5 × 10⁴ A/cm² for sample 2. Increasing in the critical current value can be attributed to non-superconducting binary phases acting as effective pinning centers in the system.     

Magnetic,magnetocaloric properties,and critical behavior in a layered perovskite La<Subscript>1.4</Subscript>(Sr<Subscript>0.95</Subscript>Ca<Subscript>0.05</Subscript>)<Subscript>1.6</Subscript>Mn<Subscript>2</Subscript>O<Subscript>7</Subscript>

We report the results of magnetic, magnetocaloric properties, and critical behavior investigation of the double-layered perovskite manganite La_1.4(Sr_0.95Ca_0.05)_1.6Mn₂O₇. The compounds exhibits a paramagnetic (PM) to ferromagnetic (FM) transition at the Curie temperature T _C = 248 K, a Neel transition at T _N = 180 K, and a spin glass behavior below 150 K. To probe the magnetic interactions responsible for the magnetic transitions, we performed a critical exponent analysis in the vicinity of the FM–PM transition range. Magnetic entropy change (??S _M) was estimated from isothermal magnetization data. The critical exponents β and γ, determined by analyzing the Arrott plots, are found to be T _C = 248 K, β = 0.594, γ = 1.048, and δ = 2.764. These values for the critical exponents are close to the mean-field values. In order to estimate the spontaneous magnetization M _S(T) at a given temperature, we use a process based on the analysis, in the mean-field theory, of the magnetic entropy change (??S _M) versus the magnetization data. An excellent agreement is found between the spontaneous magnetization determined from the entropy change [(??S _M) vs. M ²] and the classical extrapolation from the Arrott curves (µ₀H/M vs. M ²), thus confirming that the magnetic entropy is a valid approach to estimate the spontaneous magnetization in this system and in other compounds as well.     

Synthesis and Superconductivity of Layered Compounds with Orthogonal [Zr<Subscript>2</Subscript>N<Subscript>2</Subscript>] Network

Layered α-form ZrNX (X: Cl and Br) compounds with high quality were prepared by chemical vapor transport. The intercalation of alkali metal A (A: Li, Na, K, Rb) was carried out to realize electron doping into the orthogonal [Zr₂N₂] layers. The Rietveld refinement analysis reveals that the [Zr₂N₂] crystalline layers in the intercalation compounds shift mutually in the ab plane when compared with the hosts. Magnetic measurements show that the intercalation compounds A _x ZrNX are changed into superconductors with transition temperature T _c of up to 12 K. Upon the cointercalation of solvent molecules such as THF, T _c decreases to as low as 6.1 K with increasing the interlayer spacing d up to 14 Å, which is similar to the d dependence of T _c recently found in electron-doped α-form TiNX series. We also succeeded in synthesizing another new polymorph of α-Zr₂N₂S by the topochemical reaction between α-form ZrNX and Na₂S. α-Zr₂N₂S (space group: Immm, a = 4.1375(1) Å, b = 3.5422(1) Å, and c = 11.5204(3) Å) has the same α-[Zr₂N₂] layers, whereas the interlayer spacing between two adjacent [Zr₂N₂] layers is effectively decreased by 1/3 when compared with the parent compounds of ZrNX.     

Compounds WAl<Subscript>4</Subscript>, WAl<Subscript>3</Subscript>, W<Subscript>3</Subscript>Al<Subscript>7</Subscript>, and WAl<Subscript>2</Subscript> and Al-W-N combustion products

X-ray diffraction data are presented for combustion products in the Al-W-N system. New, nonequilibrium intermetallic compounds have been identified, their diffraction patterns have been indexed, and their unit-cell parameters have been determined. The phases α-and β-WAl₄ are shown to exist in three isomorphous forms, differing in unit-cell centering. The phases α′-, α″-, and α?-WAl₄ are monoclinic, with a ₀ = 5.272 Å, b ₀ = 17.770 Å, c ₀ = 5.218 Å, β = 100.10°; point groups C12/c1, A12/n1, I12/a1, respectively. The phases β′-, β″-, and β?-WAl₄ are monoclinic, with a ₀ = 5.465 Å, b ₀ = 12.814 Å, c ₀ = 5.428 Å, β = 105.92°; point groups A112/m, B112/m, I112/m, respectively. The compounds WAl₂ and W₃Al₇, identified each in two isomorphous forms, differ in cell metrics (doubling) but possess the same point group: P222. WAl ₂ ^′ : orthorhombic, a ₀ = 5.793 Å, b ₀ = 3.740 Å, c ₀ = 6.852 Å. WAl ₂ ^″ : orthorhombic, a ₀ = 11.586 Å, b ₀ = 3.740 Å, c ₀ = 6.852 Å. W₃Al ₇ ^′ : orthorhombic, Pmm2, a ₀ = 6.225 Å, b ₀ = 4.806 Å, c ₀ = 4.437 Å. W₃Al ₇ ^″ : orthorhombic, Pmm2, a ₀ = 12.500 Å, b ₀ = 4.806 Å, c ₀ = 8.874 Å. The new phase WAl₃: triclinic, P1, a ₀ = 8.642 Å, b ₀ = 10.872 Å, c ₀ = 5.478 Å, α = 104.02°, β = 64.90°, γ = 107.15°.     

The calorimetry and thermodynamic functions of Nd Mg<Stack><Subscript>3</Subscript><Superscript>I</Superscript></Stack>Mn<Subscript>4</Subscript>O<Subscript>12</Subscript> (Me<Superscript>I</Superscript>-Li,Na, K) manganites in the range from 298.15 to 673 K

The ceramic technology is employed for synthesizing manganites of composition Nd Mg ₃ ^I Mg₃Mn₄O₁₂(Me^I-Li, Na, K). The X-ray technique is used to find that the compounds crystallize in tetragonal syngony. The parameters of their crystal lattices are determined. Their heat capacities are experimentally determined in the range from 298.15 to 673 K, which enables one to reveal second-order phase transitions. In view of these transitions, equations describing the C _p ^° ～ f(T) dependence are derived, and the thermodynamic functions C _p ^° (T), H°(T)-H°(298.15), S°(T), and Φ ^xx (T) are calculated.     

Crystal structure of [CH<Subscript>3</Subscript>NH<Subscript>3</Subscript>][(UO<Subscript>2</Subscript>)(H<Subscript>2</Subscript>AsO<Subscript>4</Subscript>)<Subscript>3</Subscript>]

The crystal structure of a previously unknown compound [CH₃NH₃][(UO₂)(H₂AsO₄)₃] was solved by direct methods and refined to R ₁ = 0.038 for 3041 reflections with |F _hkl | >-4σ |F _hkl |. The compound crystallizes in the monoclinic system, space group P2₁/c, a = 8.980(1), b = 21.767(2), c = 7.867(1) Å, β = 115.919(5)°, V = 1383.1(3) ų, Z = 4. In the structure of the compound, pentagonal bipyramids of uranyl ions, sharing bridging atoms with tetrahedral [H₂AsO₄]^? anions, form strongly corrugated layered complexes [(UO₂)(H₂AsO₄)₃]^? arranged parallel to the (100) plane. The protonated methylamine molecules [CH₃NH₃]⁺ form unidimensional tapelike packings parallel to the c axis and linked by hydrophilic-hydro-phobic interactions. The topology of the layered uranyl arsenate complex [(UO₂)(H₂AsO₄)₃]^? is unusual for uranyl compounds and was not observed previously. A specific feature of this topology is the presence of monodentate arsenate “branches” arranged within the layer.