Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

Synthesis of novel ABA triblock and (ABA)n multiblock copolymers comprised of polyisobutylene and poly(γ-benzyl-l-glutamate) segments

The synthesis of ABA triblock copolymers comprised of polyisobutylene (PIB) and poly(γ-benzyl-l-glutamate) (PBLG) segments has been demonstrated for the first time by the polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA) initiated with well-defined α,ω-primary amino-functional PIBs. The ammonium-mediated polymerization of BLG-NCA provided better control of molecular weights and lower polydispersity indices (PDIs) compared to the conventional polymerization. The compositional homogeneity of the block copolymers has been confirmed by GPC-MALLS and ¹H NMR spectroscopy. Since the resulting ABA triblock copolymer possessed primary amino groups at α,ω-ends, further extension reaction with 4,4′-methylene-bis(phenyldiisocyanate) was possible to afford a novel (ABA)_n multiblock copolymer.     

Polyisobutylene based thermoplastic elastomers: VI. Poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene) triblock copolymers by coupling of living poly (α-methylstyrene-b-isobutylene) diblock copolymers

Summary Poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene) (PαMeSt-PIB-PαMePSt) triblock copolymers have been prepared via coupling of living diblock copolymers in a one pot procedure. The PαMeSt-PIB diblock copolymers were synthesized by living sequential cationic polymerization in methylcyclohexane (MeChx)/methylchloride (MeCl) solvent mixtures at −80 °C using BCl₃ for αMeSt polymerization and TiCl₄ for IB polymerization as coinitiators. The crossover efficiency, however, was only ∼57 %, due to intermolecular alkylation (indanyl ring formation) after the addition of TiCl₄. By modifying the PαMeSt end with a short segment of p-chloro-α-methylstyrene before IB addition the crossover efficiency was increased to 90 %. Coupling of the living block copolymers with 2,2-bis[4-(1-phenylethenyl)phenyl]propane (BDPEP) was rapid and gave ∼ 90 % efficiency. Received: 13 July 2000/Accepted: 3 August 2000     

Synthesis,structure and behavior of new polycaprolactam copolymers based on poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) macroactivators derived from Pluronic block copolymers

Novel series of poly (CL–co–Pluronic) polymers were successfully synthesized in situ by ring-opening polymerization (ROP) of ε-caprolactam (ε-CL). The copolymerization was activated by new type macroactivators (MAs) based on hydroxyl-terminated poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) [PEO-PPO-PEO] triblock copolymers, known under the trade name Pluronic^®. Toluene-2,4-diisocyanate (TDI) was used to obtain the isocyanate-terminated Pluronic prepolymers. The corresponding MAs were synthesized in situ with an N-carbamoyllactam structure. As an initiator of the copolymerization processes was used sodium lactamate (NaCL). To confirm the influence over the copolymerization process, microstructure, composition and molecular weight of the polymeric products two new types MAs based on Pluronic (P123 and F68) have been varied from 2 to 10 wt.% (vs. the monomer ε-CL). The structure of the both Pluronic based macroactivators (MAs) and accordingly obtained two series poly (CL-co-Pluronic) polymers were confirmed by ¹H NMR and FT-IR analyses. Additionally, the structure, molecular weight, physicomechanical behavior, thermal stability and morphology of the new synthesized poly (CL–co–Pluronic) polymers have been investigated by Differential Scanning Calorimetry (DSC), Wide-Angle X-ray Diffraction (WAXD), Thermogravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM) analysis.     

Synthesis and properties of novel donor–acceptor copolymers based on thiophene and squaraine moieties

Two novel donor–acceptor copolymers were synthesized by Sonogashira cross-coupling of alkyl/alkoxy thiophene and dibromo-substituted squaraine moieties. The structures and properties of these polymers were characterized using FT–IR, NMR, UV–Vis, gel permeation chromatography, and cyclic voltammetry. Both copolymers are readily soluble in common organic solvents. The polymer films exhibit broad absorption in the wavelength range from 300 to 1000 nm with the maximum peaks over 750 nm. Electrochemical studies reveal that the band gaps of the polymers range from 1.05 to 1.36 eV. Compared to the alkyl thiophene, the alkoxy thiophene units can effectively lower the band gap and result in significant red-shift absorption spectrum of the resulted polymer. The strong overlap of the solar spectrum and the extremely low band gaps of the polymers suggest that they may be promising candidates for solar cells.     

Thermal properties of di- and triblock copolymers of poly(l-lactide) with poly(oxyethylene) or poly(ε-caprolactone)

High molecular weight di- and triblock copolymers of poly(l-lactide), PLLA, (80 wt%) with a crystallizable flexible second component such as poly(ε-caprolactone), PCL, or poly(oxyethylene), PEO, (20 wt%) were obtained in nearly quantitative yields by ring opening of l-lactide initiated by PCL or PEO hydroxy terminated macromers. The copolymers were characterized by ¹H NMR and FTIR spectroscopy and size exclusion chromatography and showed unimodal and narrow molecular weight distributions. X-ray diffraction measurements revealed high crystallinity (38-56%) of the PLLA blocks and gave no clear evidences of PCL or PEO crystallinity. DMTA and DSC techniques showed a melting behaviour of the copolymers (T_m=174-175 °C; ΔH_m=19-37 J/g) quite similar to that of PLLA. PCL and PLLA segments are immiscible, while PLLA and PEO segments are partially miscible in the amorphous phase. Stress-strain measurements indicated a ductile behaviour of the copolymers, characterized by lower tensile moduli (225-961 Pa) and higher elongations at break (25-134%) with respect to PLLA.     

The effect of silk fibroin nanoparticles on the morphology,rheology, dynamic mechanical properties,and toughness of poly(lactic acid)/poly(ε-caprolactone) nanocomposite

The silk fibroin nanoparticles (SFNPs) were extracted from silkworm cocoons and used as a nanofiller in poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blend. The nanoparticle localization was studied theoretically and experimentally and the effects of SFNP on the morphology, rheology, toughness, and dynamic mechanical properties of the blend were investigated. According to the calculated wetting coefficient, SFNP should be thermodynamically located in the PLA matrix during the melting process. The results of SEM illustrated a common sea-island structure for the PLA/PCL blend and the incorporation of SFNP reduced the PCL domain sizes from 1.170 ± 92 μm to 794 ± 46 nm. The atomic force microscopy results showed that the nanoparticles are mainly located in the PLA matrix and also, partially at the phase interface with a thickness of layers around 80 nm. The rheological tests displayed the network formation of SFNP in the prepared nanocomposites. The dynamic mechanical analysis revealed that by the addition of SFNP, the storage modulus of neat PLA and PLA/PCL blend were increased by around 57 and 50%, respectively and the glass transition temperatures (Tg) values of PLA and PCL shifted toward each other. Additionally, using SFNP caused a lower water uptake and higher impact strength (~64%) of the blend.     

Effects of molecular weight on poly(ω-pentadecalactone) mechanical and thermal properties

A series of poly(ω-pentadecalactone) (PPDL) samples, synthesized by lipase catalysis, were prepared by systematic variation of reaction time and water content. These samples possessed weight-average molecular weights (M_w), determined by multi-angle laser light scattering (MALLS), from 2.5 × 10⁴ to 48.1 × 10⁴. Cold-drawing tensile tests at room temperature of PPDL samples with M_w between 4.5 × 10⁴ and 8.1 × 10⁴ showed a brittle-to-ductile transition. For PPDL with M_w of 8.1 × 10⁴, inter-fibrillar slippage dominates during deformation until fracture. Increasing M_w above 18.9 × 10⁴ resulted in enhanced entanglement network strength and strain-hardening. The high M_w samples also exhibited tough properties with elongation at break about 650% and tensile strength about 60.8 MPa, comparable to linear high density polyethylene (HDPE). Relationships among molecular weight, Young's modulus, stress, strain at yield, melting and crystallization enthalpy (by differential scanning calorimetry, DSC) and crystallinity (from wide-angle X-ray diffraction, WAXD) were correlated for PPDL samples. Similarities and differences of linear HDPE and PPDL molecular weight dependence on their mechanical and thermal properties were also compared.     

Blends of photovoltaic-grade ethylene–vinylacetate copolymers and low-density ethylene–octene copolymers,their morphology and their thermal,mechanical, and rheological properties

Blends of photovoltaic-grade ethylene–vinyl acetate copolymer (EVA), defined by high VA-content and low crystallinity, and low-density ethylene–octene copolymer (EO) have been investigated with regard to their processing, thermal and mechanical properties as well as their morphology. It was found that the amount of EO in the blend has a strong influence on the shear thinning behavior, melt viscosity and therefore the required extrusion temperature and resulting ability to incorporate temperature-sensitive additives like a peroxidic crosslinking agent. A phase separated morphology was found for all blend compositions, though partial miscibility leading to co-crystallization was observed for EVA rich blends. EO rich blends show lower glass transition and higher melting point compared to neat EVA and exhibit higher elastic modulus at elevated temperatures as well as greater elongation at break during tensile testing while the light transmission is diminished. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47714.     

Stereocomplex formation in enantiomeric diblock and triblock copolymers of poly (ɛ-caprolactone) and polylactide

Summary Enantiomeric diblock and triblock copolymers from caprolactone and lactide with various compositions were synthesized using alcohol/tin octoate as initiator system. Stereocomplexes were formed between pairs of enantiomeric block copolymers and their thermal properties examined. The melting temperatures of the crystalline PCL and PLA phases are depending on the composition of block copolymers. A raise of approximately 55°C of the temperature of PLA phase is observed in the blends as a consequence of stereocomplex formation as well in diblock as in triblock copolymers. Received: 31 July 2000/Revised version: 11 October 2000/Accepted: 26 October 2000     

Enzymatic synthesis,thermal and crystalline properties of a poly(β–amino ester) and poly(lactone-co-β–amino ester) copolymers

Ethyl 3-(4-(hydroxymethyl)piperidin-1-yl)propanoate (EHMPP) was prepared in quantitative yield under mild conditions via Michael addition reaction of 4-piperidinemethanol with ethyl acrylate. EHMPP underwent condensation polymerization in the presence of a lipase catalyst (CALB) to form poly[3-(4-(methylene)piperidin-1-yl)propanoate] (poly(MPP) or PMPP). Ring-opening and condensation copolymerization of EHMPP with ω-pentadecalactone (PDL) led to the synthesis of novel poly(PDL-co-MPP) copolymers, whose compositions were readily controlled by varying the monomer feed ratio. NMR analyses, including statistical analysis on repeating unit sequence distribution, indicate that the copolymers are totally random polymers. TGA analysis revealed that the degradation temperature of PMPP is approximately 160 °C lower than that of PPDL and that all poly(PDL-co-MPP) copolymers degrade in two well defined weight loss steps attributable to thermal degradation of MPP and PDL unit fractions in the polymers. The crystallinity of the polymers was studied by DSC analysis. Although PMPP and the copolymers rich in MPP units do not easily crystallize upon cooling from melt, the homopolymer and all copolymers obtained via precipitation from solution are semi-crystalline materials. WAXS analysis showed that the copolymers rich in PDL (≥51 mol%) crystallize in PPDL lattice and those with ≤21 mol% PDL content develop PMPP-type crystals while in the copolymer with 36 mol% PDL, PMPP-type and PPDL-type crystals co-exist. PMPP and poly(PDL-co-MPP) represent a new type of biodegradable poly(β–amino esters) that are potentially useful biomaterials for specific biomedical applications (e.g., gene delivery).     

Synthesis and characterization of a novel amphiphilic poly (ethylene glycol)–poly (ε-caprolactone) graft copolymers

A series of amphiphilic graft copolymers PEO-g-PCL with different poly (ε-caprolactone) (PCL) molecular weight were successfully synthesized by a combination of anionic ring-opening polymerization (AROP) and coordination-insertion ring-opening polymerization. The linear PEO was produced by AROP of ethylene oxide (EO) and ethoxyethyl glycidyl ether initiated by 2-(2-methoxyethoxy) ethoxide potassium, and the hydroxyl groups on the backbone were deprotected after hydrolysis. The ring-opening polymerization of CL was initiated using the linear poly (ethylene oxide) (PEO) with hydroxyl group on repeated monomer as macroinitiator and Sn(Oct)₂ as catalyst, then amphiphilic graft copolymers PEO-g-PCL were obtained. By changing the ratio of monomer and macroinitiator, a series of PEO-g-PCL with well-defined structure, molecular weight control, and narrow molecular weight distribution were prepared. The expected intermediates and final products were confirmed by ¹H NMR and GPC analyzes. In addition, these amphiphilic graft copolymers could form spherical aggregates in aqueous solution by self-assemble, which were characterized by transmission electron microscopy, and the critical micelle concentration values of graft copolymers PEO-g-PCL were also examined in this article.     

Crystallization and morphology of poly(ethylene succinate) and poly(β-hydroxybutyrate) blends

Summary The melting and crystallization behavior of poly(β-hydroxybutyrate) (PHB) and poly(ethylene succinate) blends has been studied by differential scanning calorimetry and optical microscopy. The results indicate that PHB and PES are miscible in the melt. Consequently the blend exhibits a depression of the melting temperature of both PHB and PES. In addition, a depression of the equilibrium melting temperature of PHB is observed. The Flory-Huggins interaction parameter (χ₁₂ ), obtained from melting point depression data, is composition dependent, and its value is always negative. Isothermal crystallization in the miscible blend system PES/PHB is examined by polarized optical microscope. The presence of the PES component gives a wide variety of morphologies. The spherulites exhibit a banded structure and the band spacing decreases with increase PES content. Received: 29 June 1998/Revised version: 31 August 1998/Accepted: 10 September 1998     

Synthesis of poly(phenylene oxide) — aromatic polyester multiblock copolymers

Summary Poly(phenylene oxide) (PPO) — aromatic polyester multiblock copolymers were synthesized by polycondensation of bisphenol-A / isophthalic acid or m- and p-hydroxybenzoic acids in the presence of PPO having a carboxylic acid at one end and a phenolic hydroxy group at the other using triphenylphosphine / hexachloroethane as coupling agent. TG analysis showed that the multiblock copolymer showed relatively high thermal stability. Received: 5 January 1998/Accepted: 4 February 1998     

Spheres on spheres – a novel spherical multiphase morphology in polystyrene-block-polybutadiene-block-poly(methyl methacrylate) triblock copolymers

A novel morphology for linear ABC-triblock copolymers is presented, where A forms spherical microdomains, covered by small B-spheres and C forming the matrix. This morphology is characterized by transmission electron microscopy and small angle X-ray scattering. The morphology forms both in solution cast and melt extruded samples. Qualitative arguments to understand the thermodynamic stability of this morphology are given. Received: 2 December 1997/Accepted: 3 December 1997     

Morphological characteristics and thermal,rheological, and mechanical properties of cellulose nanocrystals-containing biodegradable poly(lactic acid)/poly(ε-caprolactone) blend composites

This work investigates the effect of cellulose nanocrystal (CN) loading on the properties of polylactide / poly(ε-caprolactone) (PLA/PCL) (70/30) blend processed in a twin-screw extruder as a potential material that can be utilized in various applications where biodegradation is highly desired. The morphological analysis revealed a reduction in droplet size of dispersed PCL phase upon addition of CN at low concentrations (1 and 2 wt %) with maximum reduction at 2 wt % which led to maximum improvement in mechanical properties. The reinforcing effect of CN in increasing the DMA storage modulus of the prepared systems was noticed when CN concentration was increased. Further, CN enhanced the crystallization of PCL, whereas the cold crystallization of PLA remained the same with CN addition. Both melt strength and viscosity of PLA improved with the incorporation of PCL and CN. In general, a green composite material with improved properties was successfully prepared using an environmentally friendly filler material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48665.     

Rheological properties of poly(ε-caprolactone) and poly(styrene-co-acrylonitrile) blends

Summary Rheological properties of poly(-caprolactone) (PCL) and Poly (styrene-co-acrylonitrile) (SAN) blends were examined as a function of the acrylonitrile (AN) content in SAN, to systematically understand the correlation between the interaction parameter and the theological properties of miscible polymer blends. When the plateau modulus (G _N ⁰) and zero shear viscosity ( ₀) of the PCL/SAN blends are plotted against the AN content in SAN, a minimum is observed. Qualitatively, the results obtained parallel the variation of the interchain interaction with the AN content. The negative deviation ofG _N ⁰ and ₀ from linearity seems to be attributed to the increase in the entanglement molecular weight between dissimilar chains which results from the chain extension caused by interchain interaction.     

Segmented conjugated polymer based on poly(α-thiophenediyl)benzylidine

Summary Segmented polymers with random sequences of conjugated and non-conjugated blocks are produced by partial dehydrogenation of poly(-thiophenediyl)benzylidene. The fraction of conjugated block was controlled by the elimination time. The polymers gave photoluminescence. Absorption coefficients of the polymers increased with the rate of dehydrogenation, and the highest fluorescence intensity were achieved around 9 % conjugation conversion. The polymers were characterized by ¹H- and ¹³C-n.m.r. and infrared spectra, and were soluble in common organic solvents, which suggests a good processability.     

Structures and mechanical properties of electrospun cellulose nanofibers/poly(ε-caprolactone) composites

Poly(ε-caprolactone) (PCL) is one of the ecofriendly biodegradable polymers with excellent moldability but with rather low mechanical properties especially for the industrial and biomedical use. In this research, to overcome the problem, the two types of cellulose nanofibers, the cellulose acetate nanofibers (CA-NF) and the cellulose nanofibers (C-NF), were composited into PCL for the enhancement of the mechanical properties of PCL. CA-NF were prepared by electrospinning and converted into C-NF afterward by deacetylation. It was found that the Young's modulus of the CA-NF/PCL composite at the fiber concentration of 35 wt% significantly increased by ~3 times as compared with that of neat PCL, whereas C-NF/PCL of the same fiber concentration also increased by ~4.5 times. It was also found that the Young's moduli of CA-NF/PCL nearly reached the theoretical values calculated by the equation suggested by Tsai, but that the Young's moduli of C-NF/PCL could not reach the theoretical values. It indicates that CA-NF possessed better compatibility with PCL than C-NF, agreeing well with the fracture-surface analyses of the two composites by the scanning electron microscopy.