Green polymer-light-emitting-diodes based on polyfluorenes containing N-aryl-1,8-naphthalimide and 1,8-naphthoilene-arylimidazole derivatives as color tuner

A novel series of green light emitting single polymers were prepared by end-capping of N-aryl-1,8-naphthalimide and 1,8-naphthoilenearylimidazole derivatives into polyfluorene. The electroluminescence (EL) spectra of polymers (P1 ∼ P5) exhibit greenish-blue, bluish-green, pure green, and yellowish-green emission (λ_max = 465 nm, 490 nm, 500 nm, and 545 nm, respectively) from compounds (M1 ∼ M5). It was found that by the introduction of a small amount of compounds (M1 ∼ M5) (5 mol-%) into polyfluorene, the emission color can be tuned from the blue to green region. The color tuning was found to have gone through charge trapping and Förster energy transfer. The device of P4 emits pure green light with Commission Internationale de l'Eclairage (CIE) coordinates of (0.20, 0.41), and exhibits a maximum brightness of 11500 cd/m² at 12 V with a structure of indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) [PEDOT:PSS]/PVK/emission layer/Ca/Ag. The device of P5 emits yellowish green light with Commission Internationale de l'Eclairage (CIE) coordinates of (0.36, 0.56), and exhibits a maximum brightness of 6534 cd/m² at 17 V.     

Green electroluminescent polyfluorenes containing 1,8-naphthalimide moieties as color tuner

A series of copolymers (CNPFs) containing low-band-gap 1,8-naphthalimide moieties as color tuner was prepared by a Yamamoto coupling reaction of 2,7-dibromo-9,9-dioctylfluorene (DBF) and different amount of 4-(3,6-dibromocarbazol-9-yl)-N-(4′-tert-butyl-phenyl)-1,8-naphthalimide (Br-CN) (0.05-1 mol% feed ratio). The light emitting properties of the resulting copolymers showed a heavy dependence on the feed ratio. In photoluminescence (PL) studies, an efficient color tuning through the Förster energy transfer mechanism was revealed from blue to green as the increase of Br-CN content, while in electroluminescence (EL) studies, the color tuning was found to go through a charge trapping mechanism. It was found that by introduction of a very small amount of Br-CN (0.1-0.5 mol%) into polyfluorene, the emission color can be tuned from blue to pure green with Commission International de l'Echairage (CIE) coordinates being (0.21, 0.42) and (0.21, 0.48). A green emitting EL single-layer device based on CNPF containing 0.1 mol% of Br-CN showed good performances with a low turn-on voltage of 4.2 V, a brightness of 9104 cd/m², the maximum luminous efficiency of 2.74 cd/A and the maximum power efficiency of 1.51 lm/W. To further improve the EL performances through balancing the charge trapping process, a copolymer (BCNPF05) derived from 0.5 mol% of a triarylamine-containing 4-{3,6-bis-[4″-(4?-bromophenyl-p-tolyl-amino)-phenyl]-carbazol-9-yl}-N-(4′-tert-butyl-phenyl)-1,8-naphthalimide (Br-BCN) and 99.5 mol% of 2,7-dibromo-9,9-dioctylfluorene was also prepared. As expected, a single layer EL device based on BCNPF05 exhibited better performances with a brightness of 14228 cd/m², the maximum luminous efficiency of 4.53 cd/A and the maximum power efficiency of 1.57 lm/W.     

Synthesis and electroluminescence properties of a novel tetraphenylsilane-oxadiazole-diphenyl(para-tolyl)amine polymer

A novel triarylaminooxadiazole-containing tetraphenylsilane light-emitting polymer (PTOA) has been synthesized. Excellent thermal stability was observed due to the presence of a rigid tetraphenylsilane-based polymer backbone (T_g = 218 °C, T_d = 373 °C). In solution, PTOA shows photoluminescence (PL) with an emission maximum at 426 nm, which is attributed to the light-emitting unit of the triarylaminooxadiazole group. In solid film, the emission maximum of PL is observed at 458 nm, a 32 nm red-shift from the PL in solution. The solvatochromic effect and excimer formed in the solid film are responsible for the red-shifting and broadening of the PL emission band. The PL stability and morphology of the PTOA solid film were further investigated by thermal annealing at elevated temperatures. No significant difference in the PL spectra or morphology was observed between a pristine sample and a repeatedly thermally annealed film (at 200 °C). PTOA-based PLED shows EL with a main peak at 458 nm accompanied by a shoulder at around 530 nm. The light emission from electromer or electroplex leads to a broadening of the EL spectra (400-650 nm), which corresponds to the interaction between the oxadiazole and diphenyl(4-tolyl)amine groups in different polymer segments or chains. A sky blue emission (Commission Internationale de L'Eclairage (CIE_x,y) coordinates (0.20,0.23)) was obtained for PTOA-based PLED. The brightness and efficiency of the PLED can be as high as 248 cd/m² and 0.54 cd/A, respectively. The EL of PTOA-based PLED has been further improved by blending the PTOA with poly(n-vinylcarbazole) (PVK) in different concentrations. The effects of concentration on the PL and EL were studied for the PTOA-PVK composite film-based PLEDs.     

Synthesis of laterally attached side-chain liquid crystalline poly(p-phenylene vinylene) and polyfluorene derivatives for the application of polarized electroluminescence

Two series of poly(p-phenylene vinylene) and polyfluorene derivatives (PPV1-PPV4 and PF1-PF5) containing laterally attached penta(p-phenylene) mesogenes were synthesized and characterized. These polymers show nematic liquid crystalline behavior. The optical properties of the polymers were investigated by UV-vis absorption and photoluminescence spectrometers and these polymers were fabricated to form the polarized electroluminescent devices using poly(ethylenedioxythiophene)-poly(styrene sulfonic acid) (PEDOT-PSS) as an alignment layer. In the series of poly(p-phenylene vinylene) derivatives, polymer PPV4 offered the best EL device performance. It emitted yellow light at 588 nm at 4 V. The maximum brightness was about 1337 cd/m² at 9 V with a polarized ratio of 2.6. In another series of polyfluorene derivatives, PF4 offered the best EL device performance with the polarized ratio of 12.4 and a maximum luminescence of 1855 cd/m². In the case of polarized white light, as a consequence of blending small amount of PF4 and PF5 with a host polymer PF2, polarized ratio of up to 10.2 and a maximum brightness of 2454 cd/m² have been attained. The aligned films exhibited pronounced polarized ratio, implying that the polymers exhibit potential for linearly polarized LED application.     

Efficient white polymer-light-emitting-diodes based on polyfluorene end-capped with yellowish-green fluorescent dye and blended with a red phosphorescent iridium complex

A novel series of blue and yellowish-green light-emitting single polymers were prepared by end-capping of low contents of 4-bromo-7H-benzo [de]naphtha[2′,3′:4,5]imidazo[2,1-a]isoquinolin-7-one (M1) into polyfluorene. Electroluminescence (EL) spectra of these polymers exhibit blue emission (λ_max = 430/460 nm) from the fluorene segments and yellowish-green emission (λ_max = 510/530 nm) from the M1 units. For the polymer (PFNAP-0.06) with the M1 unit content of 0.06 mol-%, its EL spectrum shows balanced intensities of blue emission and yellowish-green emission with Commission Internationale de l'Eclairage (CIE) coordinates of (0.25, 0.34). The maximum brightness of the device prepared from the polymer (PFNAP-0.06) is 6704 cd/m² at 10 V with a structure of indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) [PEDOT:PSS]/PVK/emission layer/Ca/Ag. A new white polymer-light-emitting-diode (WPLED) can be developed from the single polymer (PFNAP-0.06) system blended with a red phosphorescent iridium complex [Bis(2-[2′-benzothienyl)-pyridinato-N,C^3′] iridium (acetylacetonate) (BtpIr)]. We were able to obtain a white-light-emission device by adjusting the molar ratio of BtpIr to PFNAP-0.06 with a structure of indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) [PEDOT:PSS]/PVK/emission layer/Ca/Ag. The brightness in such a device configuration is 4030 cd/m² at 9 V with CIE coordinates of (0.32, 0.34).     

Pure color and stable blue-light emission-alternating copolymer based on fluorene and dialkoxynaphthalene

A new blue-light emitting polymer that alternates between fluorene and alkoxynaphthalene structure has been developed. The fluorene and naphthalene units were highly distorted with an angle of 76.22° according to theoretical calculations. The obtained polymer has a weight average molecular weight of 273,800 with a polydispersity index of 2.35, good solubility and high thermal stability with a T_g of 176 °C. The film photoluminescence (PL) spectrum (405 nm) is consistent with that of solution and the PL spectra of the polymer did not show any peak in the long wavelength region even after annealing for 24 h at 100 °C. The double-layered device with an ITO/PEDOT/polymer/LiF/Al structure has a turn-on voltage of about 5.4 V, maximum brightness of 110 cd/m² and an electroluminescent efficiency of 0.09 cd/A. The OLED generates pure blue EL emission (λ_max = 405 nm) with excellent CIE coordinates (x = 0.15, y = 0.10) as well as stable blue EL emission that is not altered by voltage increase.     

Electrophosphorescence from iridium complex-doped mesogen-jacketed polymers

A mesogen-jacketed polymer P-Ct {poly{2,5-bis[(5-tert-butylphenyl)-1,3,4-oxadiazole]styrene}} has been investigated as a host material for IrMDPP [Ir(III)bis(5-methyl-2,3-diphenylpyrazine) (acetyl acetonate)] doped polymer electrophosphorescent device. It was found that the device with P-Ct was more efficient than that with PVK. The maximum luminance and external luminous efficiency can reach 3702 cd/m² and 0.83 cd/A, respectively, which were higher than those of device with PVK (1999 cd/m² and 0.68 cd/A), which can be partly explained by the more balanced carrier injection and transportation and longer lifetime of excitons in P-Ct-TPD-IrMDPP. It was also found that as the IrMDPP content increased in P-Ct-TPD, the EL spectra color shifts from green-yellow to yellow-orange and were different from PL spectra, which was partly due to the dominating role of direct charge-trapping and recombination in the EL process over the energy-transfer routes.     

Synthesis and characterization of highly soluble 9,10-diphenyl-substituted poly(2,6-anthracenevinylene)

We report the synthesis and optoelectronic properties of highly soluble poly(9,10-bis(3′,4′-di(2″-ethylhexyloxy))phenyl)-2,6-anthracenevinylene) (HSM-PAV). The key intermediate for the synthesis of HSM-PAV is 2,6-dimethyl-9,10-dibromoanthracene, and the high solubility of HSM-PAV is from the incorporation of lateral 3,4-di(2-ethylhexyloxy)phenyl moieties into the 9,10-positions of anthracene units. The increase of side alkyloxy groups endows HSM-PAV with higher molecular weight (M_n = 3.2 × 10⁴) and better electroluminescence performances (L_max = 590 cd/m², LE_max = 0.27 cd/A) compared with the poly(2,6-anthracenevinylene) with lateral monoalkyoxy moieties (M_n = 1.9 × 10⁴, L_max = 340 cd/m², LE_max = 0.17 cd/A). The electrical conductivity of doped HSM-PAV film with iodine is 5 × 10⁻² S cm⁻¹ that is several order higher than that of doped 9,10-anthracene-based polymers, further demonstrating that linkage position has a dramatic effect on the optoelectronic properties of anthracene-based conjugated polymers.     

White light emission obtained by direct color mixing in multi-layer organic light-emitting devices

Three different structures of multi-layer organic light-emitting devices, which consisted of two emitting layers separated by a carrier blocking layer, were investigated. Since the emitting layers are constructed to emit different colors, the colors emitted from the structures are mixed. It was found that the colors were directly mixed in the structures of this study due to the carrier blocking layer sandwiched by the two emissive layers. The blocking layer splits the carrier recombination zone, and with the emission color is controlled by balancing the split. For the white light the CIE coordinate of (0.30, 0.33) is obtained at an applied voltage of 14 V. The luminance is measured to be 1,000 cd/m² at 14 V. with the power efficiency of 0.4 lm/W. For a luminance of 100 cd/m² at 11 V., the CIE coordinate is found to be (0.31, 0.34) and the power efficiency was as high as 0.53 lm/W.     

Copolymers containing pendant styryltriphenylamine and carbazole groups: Synthesis, optical, electrochemical properties and its blend with Ir(ppy)3

A series of vinyl copolymers (PVKST12-PVKST91) and homoploymer PVST containing pendant hole-transporting 4-(4-oxystyryl)triphenylamine (12-100 mol%) and carbazole chromophores were synthesized by radical copolymerization and employed as host for Ir(ppy)₃ phosphor to tune emission color. They were characterized using the ¹H NMR, FT-IR, absorption and photoluminescence spectra, elemental analysis, GPC, cyclic voltammetric and thermal analysis (DSC, TGA). Their weight-average molecular weights (M_w) and decomposition temperatures (T_d) were 1.46-5.68 × 10⁴ and 356-399 °C, respectively. The HOMO levels of PVKST12-PVKST91 and PVST, estimated from the onset oxidation potentials in cyclic voltammograms, were −5.40 to −5.14 eV, which are much higher than −5.8 eV of the conventional host poly(9-vinylcarbazole) (PVK) owing to high hole-affinity of the 4-(4-oxystyryl)triphenylamine groups. Therefore, copolymers PVKST are effective in reducing hole-injection barrier between the PEDOT:PSS and emitting layer. Electroluminescent devices [ITO/PEDOT:PSS/PVKST:Ir(ppy)₃:PBD/BCP/Ca/Al] using the hole-transporting PVKST as host were fabricated to tune the emission color. Their EL spectra showed a major emission at 515 nm and a minor peak at 435 nm attributed to Ir(ppy)₃ and 4-(4-oxystyryl)triphenylamine, respectively. The C.I.E. 1931 coordinates shift from (0.29, 0.61) for PVK to (0.33, 0.42) for PVST with an increase in 4-(4-oxystyryl)triphenylamine content.     

Fluorescence improvement of Ba1.3Ca0.7SiO4:Eu,Mn phosphors via Dy addition and their color-tunable properties

A series of novel single-phase white phosphors Ba_1.3Ca_0.69−x−ySiO₄:0.01Eu²⁺,xMn²⁺, yDy³⁺ were synthesized by the solid-state method. The excitation spectra of these phosphors exhibit a broad band in the range of 260–410 nm, which can meet the application requirements for near-UV LED chips (excited at 350–410 nm). The emission spectra consist of two broad bands positioned around 455 nm and 596 nm, which are assigned to 5d→4f transition of Eu²⁺, and ⁴T₁→⁶A₁ transition of Mn²⁺, respectively. The luminescence intensity of phosphors enhances obviously by doping Dy³⁺ ions, and the intensity of two bands reaches an optimum when Dy³⁺ amounts to 2 mol%. In addition, thermoluminescence investigation of phosphor was conducted, getting two shallow trap defects with activation energy of 0.43 eV and 0.45 eV, which demonstrates the energy transfer mechanism of Dy–Eu through the process of hole and electron traps. By precisely tuning the Mn²⁺ content, an optimized white light with color rendering index (CRI) of R_a=84.3%, correlated color temperature (CCT) of T_c=8416 K and CIE chromaticity coordinates of (0.2941, 0.2937) is generated. The phosphor could be a potential white phosphors for near-UV light emitting diodes.     

Color stability and suppressed efficiency roll-off in white organic light-emitting diodes through management of interlayer and host properties

Color stability and efficiency roll-off of white light-emitting diodes (WOLEDs) with blue fluorescent and red phosphorescent emitting materials were manipulated by controlling the charge transport properties of interlayer and triplet host materials. A pure white emission was observed in WOLEDs with a bipolar interlayer and a hole transport type triplet host material. A white color coordinate of (0.31, 0.35) and a current efficiency of 14.4 cd/A were obtained. In addition, color index of WOLEDs could be kept stable up to a high luminance of 10,000 cd/m² and an efficiency roll-off was also suppressed.     

A white emitting poly(phenylenevinylene)

A white emitting copolymer with the polyphenylenevinylene (PPV) structure is obtained via the Stille cross-coupling reaction. Substitution of hydrogen atoms with fluorine atoms on the vinylene units of poly(1,4-dialkoxyphenylenevinylene) shifts the emission from orange-red to blue. White emission is obtained by combining dialkoxyphenylenedifluorovinylene and dialkoxyphenylenevinylene units in proper ratio. The two complementary emitters are obtained separately by Stille polymerization reaction. Then, the two reaction mixtures are combined without purification in different ratios and further reacted in similar experimental conditions. A white luminescent material is obtained using 99/1 mixing ratio. OLED devices fabricated with this copolymer shows near-white emission with CIE (0.30, 0.40) and excellent stability in the range 10–200 cd/m².     

New host copolymers containing pendant triphenylamine and carbazole for efficient green phosphorescent OLEDs

A series of vinyl copolymers (P1-P6) containing pendant hole-transporting triphenylamine (11-88 mol%) and carbazole chromophores were synthesized by radical copolymerization to investigate the influence of triphenylamine groups upon optoelectronic properties. The copolymers were readily soluble in common organic solvents and their weight-average molecular weights (M_ws) were between 1.41 × 10⁴ and 2.24 × 10⁴. They exhibited moderate thermal stability with T_d = 402-432 °C at 5% weight loss. The emission spectra (both PL and EL) of the blends [P1-P6 with 4 wt% Ir(ppy)₃] showed dominant green emission (517 nm) attributed to Ir(ppy)₃ due to efficient energy transfer from P1-P6 to Ir(ppy)₃. The HOMO levels of P1-P6, estimated from onset oxidation potentials in cyclic voltammeter, were −5.42 to −5.18 eV, which are much higher than −5.8 eV of conventional poly(9-vinylcarbazole) (PVK) host owing to high hole-affinity of the triphenylamine groups. The optoelectronic performances of phosphorescent EL devices, using P1-P6 as hosts and Ir(ppy)₃ as dopant (ITO/PEDOT:PSS/P1-P6:Ir(ppy)₃ (4 wt%):PBD (40 wt%)/BCP/Ca/Al), were greatly improved relative to that of PVK. The best performance was obtained with P4 device, in which the maximum luminance and luminance efficiency were 11?501 cd/m² and 10.6 cd/A, respectively.     

Synthesis and characterization of ortho-twisted asymmetric anthracene derivatives for blue organic light emitting diodes (OLEDs)

New ortho-twisted asymmetric anthracene derivatives have been synthesized and characterized. The anthracene derivatives show good thermal stability with high glass transition temperatures and a pure blue emission with a narrow full width at half maximum in a film state (λ_max = 454 nm with 71 nm for 2-(2-methylnaphtathalene-1-yl)-9,10-di(naphthalene-2-yl)anthracene and λ_max = 445 nm with 60 nm for 2-(biphenyl-2-yl)-9,10-di(naphthalene-2-yl)anthracene). A multi-layered device using 2-(2-methylnaphtathalene-1-yl)-9,10-di(naphthalene-2-yl)anthracene as an emitting material exhibits a maximum quantum efficiency of 3.61% (power efficiency of 2.15 lm/W, current efficiency of 3.55 cd/A) and blue Commission Internationale de l’Eclairage chromaticity coordinates (x = 0.15, y = 0.13). A fabricated device using 2-(biphenyl-2-yl)-9,10-di(naphthalene-2-yl)anthracene as an emitting material exhibits a maximum quantum efficiency of 3.7% (power efficiency of 2.11 lm/W, current efficiency of 3.55 cd/A) and a blue Commission Internationale de l’Eclairage chromaticity coordinates (x = 0.15, y = 0.12).     

Effect of hydroxyl ions on chloride penetration depth measurement using the colorimetric method

In this paper, the effect of hydroxyl ions on chloride penetration depth measurement using the colorimetric method was studied. Equivalent silver nitrate solution (i.e. Ag⁺ = Cl⁻) was added to the NaCl + NaOH solution with different concentrations, then the amount of precipitated silver chloride and silver oxide were determined by chemical methods, and the color of the precipitated products was examined. Results show that the amount of silver chloride formed decreases linearly as OH⁻ to Cl⁻ ratio (r) increases. Thus, the chloride concentration at color change boundary changes with the pH value of the concrete. AgCl has a white color, while Ag₂O has a dark brown color. When the value of r exceeds 4, the color of the mixture looks brown, and color change boundary cannot be easily distinguished.     

Synthesis of terpyridine-functionalized poly(phenylenevinylene)s: The role of meta-phenylene linkage on the Cu and Zn chemosensors

A meta-phenylene-containing poly(phenylenevinylene) (PPV) with pendant terdentate terpyridine ligand 2b was synthesized and its fluorescence properties were compared with its isomeric PPV. The meta-phenylene bridge interrupts the resonance connection between the PPV backbone and the metal-chelation sites, while jointing the structurally defined chromophores together. The fluorescence of the polymer, with emission λ_em = 460 nm and ?_fl ≈ 0.45, is found to be selectively quenched by Cu²⁺ ion with interference from Co²⁺ and Ni²⁺ ions. The nature of the quenching process in 2b is probed by using Stern-Volmer analysis, revealing that the quenching results from both dynamic collision and metal chelation. Addition of Zn²⁺ and Cd²⁺ ions only induces partial fluorescence quenching, accompanied with a broad new emission band occurring at ∼560 nm. With the aid of a model compound study, the new emission band at 560 nm is attributed to the complex formation with terpyridine to Zn ratio of 1:1. The study finds that the polymer has the potential for Cu²⁺ and Zn²⁺ sensors.     

Novel chemosensory materials based on polyfluorenes with 2-(2′-pyridyl)-benzimidazole and 5-methyl-3-(pyridin-2-yl)-1,2,4-triazole groups in the side chain

Polyfluorenes with 2-(2′-pyridyl)-benzimidazole (P1, P2 and P4) and 5-methyl-3-(pyridin-2-yl)-1,2,4-triazole (P3) groups in the side chain were synthesized by Suzuki polycondensation. The responsive properties of polymers on metal ions and H⁺ were investigated by absorption and emission spectra. The fluorescences of polymers (P1-P4) were completely quenched upon the transition metal ions such as Co²⁺, Ni²⁺, Fe³⁺ and Ag⁺ due to the enhanced electronic communication properties of conjugated polymers. The obvious differences to Ni²⁺ ion responsive sensitivity were observed between P1 and P4 polymers. The fluorescences of P1 and P4 were quenched to 50 (I₀/I) and to 22 (I₀/I) upon the addition of a Ni²⁺ solution of 3.2 × 10⁻⁶ M, as well as 5.0 × 10⁻⁶ M, respectively, owing to the different conjugated backbone. The fluorescences of P2 and P3 were completely and hardly quenched upon the addition of a Al³⁺ solution of 1.0 × 10⁻⁴ M, respectively, owing to the different receptors in the side chain. P2 showed good selectivity to Ni²⁺ ion in the range of quencher concentration as low as 5 ppm, owing to the different chelating abilities of receptor with ions. Cu²⁺ and Mn²⁺ ions hardly quenched the fluorescences of polymers (P1-P4), which were different from the oligopyridyl-functionalized conjugated polymers. The results further opened the opportunities to develop the tailored sensory materials through the appropriate alteration of receptors in the side chain and the conjugated backbone.     

New light-emitting hyperbranched polymers prepared from tribromoaryls and 9,9-dihexylfluorene-2,7-bis(trimethyleneborate)

Three new hyperbranched polymers (P1-P3) were prepared by copolymerization of tribromoaryl moieties (triphenylamine, carbazole and fluorene moieties) with 9,9-dihexylfluorene-2,7-bis(trimethyleneborate) from “A₂ + B₃” approach based on Suzuki polycondensation reaction. They are soluble in common organic solvents, and exhibit good thermal stable luminescence. Interestingly, unlike most of fluorene-containing polymeric materials, P3 emits strong green light due to its special structure. Double-layer devices with configurations ITO/PEDOT/Polymer (50 nm)/TPBI(50 nm)/LiF(0.5 nm)/Al(80 nm) were fabricated and emitted blue or green light, with maximum luminance in the range of 25-142 cd/m² and the current efficiency up to 0.18 cd/A.     

Synthesis,structural and luminescence properties of near white light emitting Dy-doped Y2CaZnO5 nanophosphor for solid state lighting

Novel near white light emitting Y₂CaZnO₅ (YCZ) nanocrystalline powders doped with Dy³⁺ ions were synthesized via the citrate gel combustion method. The structure of the compound is found to be triclinic with a particle size in the range of 20–30 nm. Luminescence properties have been characterized using photoluminescence (PL), excitation spectra and decay time measurements. The PL spectra have shown a broad blue band due to ⁴F_9/2→⁶H_15/2 transition and sharp yellow band corresponding to ⁴F_9/2→⁶H_13/2 transition of Dy³⁺ ions. From the concentration dependent PL studies, the optimum concentration of Dy³⁺ ions in YCZ is found to be 1.0 mol%, where intense near white light emission was observed. The Dy³⁺:YCZ nanophosphor has shown relatively better white color properties than the reported Dy³⁺:Y₂O₃ nanophosphor. The yellow to blue intensity ratios, CIE chromaticity coordinates and correlated color temperature studies have shown the possibility of using this compound for white light emission.