Effect of evaporation and solidification of the charged jet in electrospinning of poly(ethylene oxide) aqueous solution

The electrospinning process uses electrical force to produce nanofibers. A charged droplet acquires a conical shape known as the Taylor cone and then becomes unstable. A charged jet emerges from the vertex and develops a spiral path due to the electrically driven bending instability, which makes it possible, in a small space, for the jet to elongate by a large amount and produce nanofibers. Evaporation and the associated solidification were identified as important factors that affect the diameter of electrospun nanofibers. In this study, the evaporation rate and solidification of the charged jet were controlled by varying the relative humidity during electrospinning of poly(ethylene oxide) from aqueous solution. As the relative humidity increased, the solidification process became slower, allowing elongation of the charged jet to continue longer and thereby to form thinner fibers. As the relative humidity increased from 5.1% to 48.7%, the diameter of the solidified fiber decreased from 253 nm to 144 nm. As the relative humidity increased above 50%, beads formed on the thinner fibers, indicating that the capillary instability occurred before the jet solidified. The vapor concentration of solvent is an effective electrospinning process control parameter of fiber diameter that also produces a systematic change in the development of beads on the fibers.     

The effects of solution properties and polyelectrolyte on electrospinning of ultrafine poly(ethylene oxide) fibers

The effects of solution properties and polyelectrolyte on the electrospinning of poly(ethylene oxide) (PEO) solutions were investigated. Ultrafine PEO fibers without beads were electrospun from 3, 4, 7 and 7 wt% PEO solutions in chloroform, ethanol, (dimethylformamide) DMF and water, respectively. At these concentrations, the values of [η]C were ∼10 for all solutions. The average diameters of PEO fibers were ranged from 0.36 to 1.96 μm. The higher the dielectric constant of solvent was, the thinner PEO fiber was. The average diameters of electrospun PEO fibers from PEO/water solutions were decreased and their distributions were narrowed by adding 0.1 wt% poly(allylamine hydrochloride) (PAH) and poly(acrylic acid sodium salt) (PAA) due to the increased charge density in solutions. The addition of PAH and PAA lowered the minimum concentration for electrospinning of a PEO/water solution to 6 wt%.     

Electrospinning of sodium alginate with poly(ethylene oxide)

Another natural biopolymer, sodium alginate, has been electrospun from aqueous solution by blending with a non-toxic, biocompatible, synthetic polymer poly(ethylene oxide) (PEO). The interaction between sodium alginate and PEO has been evidenced by FTIR and conductivity change, which is thought to be the main reason for the successful electrospinning. The solution properties of sodium alginate/PEO blends have been measured, including viscosity, conductivity and surface tension. The morphology and mechanical properties of the electrospun mats have been investigated. Smooth fibers with diameters around 250 nm are obtained from 3% solutions of varied alginate/PEO proportions ranging from 1:1 to 0:1. Tensile strength around 4 MPa is found with smooth fiber mats. The anti-water property of the electrospun mats has been improved by a combination of hexamethylene diisocyanate and aqueous calcium chloride cross-linkings.     

Miscibility of C60-end-capped poly(ethylene oxide) with poly(vinyl chloride)

The miscibility of blends of single [60]fullerene (C₆₀)-end-capped poly(ethylene oxide) (FPEO) or double C₆₀-end-capped poly(ethylene oxide) (FPEOF) with poly(vinyl chloride) (PVC) has been studied. Similar to poly(ethylene oxide) (PEO), both FPEO and FPEOF are also miscible with PVC over the entire composition range. X-ray photoelectron spectroscopy showed the development of a new low-binding-energy Cl2p doublet and a new high-binding-energy O1s peak in FPEO/PVC blends. The results show that the miscibility between FPEO and PVC arises from hydrogen bonding interaction between the α-hydrogen of PVC and the ether oxygen of FPEO. From the melting point depression of PEO, FPEO or FPEOF in the blends, the Flory-Huggins interaction parameters were found to be −0.169, −0.142, −0.093 for PVC/PEO, PVC/FPEO and PVC/FPEOF, respectively, demonstrating that all the three blend systems are miscible in the melt. However, the incorporation of C₆₀ slightly impairs the interaction between PEO and PVC.     

Synthesis of functionalized multiarm poly(ethylene oxide) stars

Six arm poly(ethylene oxide) (PEO) stars carrying either 6 pyridyl or 12 hydroxyl groups at their periphery were synthesized using an arm-first approach. To this end, two novel α,ω-heterodifunctional PEO's, namely α-ketal,ω-hydroxy and α-pyridyl,ω-hydroxy PEO's were synthesized and, after the deprotonation of their hydroxyls, deactivated onto hexachlorocyclophosphazene which served to build the core. Quaternization of the stars containing six outer pyridyl groups created positive charges at their periphery while the acidic treatment of stars carrying terminal ketal rings afforded six arm PEO stars with 12 peripheral hydroxyls. The latter compound was subsequently deprotonated and used to polymerize ethylene oxide by a classical core-first approach. This resulted in the formation of highly branched PEO's also referred to as dendrimer-like PEO stars which consisted of a first generation of six PEO arms and a second generation of 12 hydroxy-ended PEO branches.     

Aggregation behavior of two-arm fullerene-containing poly(ethylene oxide)

A water-soluble two-arm fullerene-containing poly(ethylene oxide) (PEO) was synthesized through isocyanate-hydroxy condensation reaction with fullerenol as a molecular core and characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetry, and matrix-assisted laser desorption ionization time of flight mass spectrometry. The aggregation behavior of the resulting amphiphilic polymer in water, THF, and DMF, was studied by gel permeation chromatography, laser light scattering, and transmission electron microscopy. The polymer forms spherical aggregates with an aggregation number around 540-1020.     

Formation of dendrite crystals in poly(ethylene oxide) interacting with bioresourceful tannin

A dendritic morphology, induced by miscibility with strong intermolecular interaction between poly(ethylene oxide) (PEO) and bioresourceful tannin [tannic acid (TA)]. Mechanism was investigated by differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy, wide-angle X-ray diffraction, and polarized optical microscopy. The cell crystallography preference in correlation to the intermolecular interaction in the dendrites in PEO/TA (70/30) blend was analyzed. Dendritic morphology was more distinct at PEO/TA = 70/30 composition, where the spherulitic growth rate showed a highly nonlinear relationship with respect to crystallization time (R α t ^1/2). Diffusion limitation mechanism caused by the crystallography preference attributed to the strong intermolecular interaction between PEO and TA was at work.     

Phototransformation of water-soluble polymers. Part II: photooxidation of poly(ethylene oxide) in aqueous solution

Poly(ethylene oxide) (PEO) was irradiated in aqueous solution under long wavelengths (λ>300 nm, 20 °C) and in presence of oxygen. The photooxidation of PEO was studied by IR spectrophotometry, viscometry and size exclusion chromatography. The formation of the oxidation photoproducts was studied by infrared analysis of films obtained by evaporation of aliquots of irradiated aqueous solutions. The photoproducts were identified by chemical derivatization treatments coupled with infrared measurements. Viscosimetry and SEC analysis showed that photooxidation was leading to a dramatic decrease of the molecular weights. The influence of the pH of the aqueous solutions was also examined. Unexpected results were obtained for the pH 12 solutions, indicating a strong inhibition of the oxidation.

Comparison with the results obtained in the case of PEO irradiated in the solid state showed that no direct transposition of the knowledge concerning the behavior of the solid polymer could be made.     

Crystalline structures in ultrathin poly(ethylene oxide)/poly(methyl methacrylate) blend films

Amorphous poly(ethylene oxide)/poly(methyl methacrylate) (PEO/PMMA) blend films in extremely constrained states are meta-stable and phase separation of fractal-like branched patterns happens in them due to heterogeneously nucleated PEO crystallization by diffusion-limited aggregation. The crystalline branches are viewed flat-on with PEO chains oriented normal to the substrate surface, upon increasing PMMA content the branch width remains invariant but thickness increases. It is revealed that PMMA imposes different effects on PEO crystallization, i.e. the length and thickness of branches, depending on the film composition.     

Crystallization and unusual rheological behavior in poly(ethylene oxide)-clay nanocomposites

We report a systematic study of the crystallization and rheological behavior of poly(ethylene oxide) (PEO)-clay nanocomposites. To that end a series of nanocomposites based on PEOs of different molecular weight (10³ < MW < 10⁵ g/mol) and clay surface modifier was synthesized and characterized. Incorporation of organoclays with polar (MMT-OH) or aromatic groups (MMT-Ar) suppresses the crystallization of polymer chains in low MW PEO, but does not significantly affect the crystallization of high MW matrices. In addition, the relative complex viscosity of the nanocomposites based on low MW PEO increases significantly, but the effect is less pronounced at higher MWs. The viscosity increases in the series MMT-Alk < MMT-OH < MMT-Ar. In contrast to the neat PEO which exhibits a monotonic decrease of viscosity with temperature, all nanocomposites show an increase after a certain temperature. This is the first report of such dramatic enhancements in the viscoelasticity of nanocomposites, which are reversible, are based on a simple polymer matrix and are true in a wide temperature range.     

Step-scan alternating DSC study of melting and crystallisation in poly(ethylene oxide)

Step-scan alternating differential scanning calorimetry (SSA-DSC) method was applied to investigate the phase behaviour of well-characterised poly(ethylene oxide) (PEO). Influence of the three main measurement's parameters of SSA-DSC method: length of the isothermal segment (t_iso/s), temperature jump between two subsequent isothermal segments (step/deg) and linear heating rate in dynamic segments (b/K/min), on the shape of reversing and non-reversing components during the melting and crystallisation of PEO, has been evaluated. It was found that the reversing component during melting of PEO is increasing with an increase of the isothermal segment length. This effect is due to the existence of defected polymer crystal structures that form metastable regions between crystal phase and already melted polymer. Reversible recrystallisation in the presence of still existing polymer crystals is facilitated by longer isothermal segments. By increasing the step, the equilibrium of reversible processes is shifted towards products and activation of rate-controlled processes takes place; molecular nucleation is hampered and partial melting and/or recrystallisation proceed slower—this effect can be observed as a decrease of reversing signal with increasing step.     

Conformational characteristics of poly(ethylene oxide) (PEO) in methanol

The conformational characteristics of poly(ethylene oxide) (PEO) in methanol at 25 °C were investigated by static light scattering and viscometry for high molar mass (M_w) PEO fractions covering M_w = 3.42 × 10⁵-5.05 × 10⁶ g mol⁻¹. No trace of downturn in the plot of angular dependence of Kc/R_θ at low angle was found. Experimental scaling laws for the second virial coefficient (A₂), the third virial coefficient (A₃), the radius of gyration and the intrinsic viscosity ([η]) were determined. The exponents characterizing these scaling laws confirmed that the PEO chain in methanol has a flexible conformation with relatively large excluded volume, but methanol is not as good solvent as water. On the other hand, the low value of interpenetration function (Ψ) and the relatively higher order of the dimensionless parameter Π are considered to be an indication of local chain stiffness. All the results obtained in this study allow us to conclude that the overall chain conformation of PEO assumed in methanol is basically a random coil, but is intermittently mixed with helical structure.     

Molecular dynamics simulation studies of binary blend miscibility of poly(3-hydroxybutyrate) and poly(ethylene oxide)

By means of full atomistic molecular dynamics simulation, the solubility parameters for pure poly(3-hydroxybutyrate) and poly(ethylene oxide) are calculated and the results are in agreement with the literature values. Furthermore, in order to reveal the blend property, the volume-temperature curve of the PHB/PEO blend system (1:2 blends in terms of repeated units) is simulated by employing the united atom approximation to obtain the glass transition temperature. From the volume-temperature curve, the glass transition temperature is about 258 K, which is compared well with the experimental results. It should be pointed out that the two simulated solubility parameters are similar and there is only one glass transition of the blend system, these indicate that the studied blend system is miscible.     

Poly(hydroxyether sulfone) and its blends with poly(ethylene oxide): miscibility, phase behavior and hydrogen bonding interactions

Poly(hydroxyether sulfone) (PHES) was synthesized through polycondensation of bisphenol S with epichlorohydrin. It was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy and differential scanning calorimetry (DSC). The miscibility in the blends of PHES with poly(ethylene oxide) (PEO) was established on the basis of the thermal analysis results. DSC showed that the PHES/PEO blends prepared by casting from N,N-dimethylformamide (DMF) possessed single, composition-dependent glass transition temperatures (T_gs), indicating that the blends are miscible in amorphous state. At elevated temperatures, the PHES/PEO blends underwent phase separation. The phase behavior was investigated by optical microscope and the cloud point curve was determined. A typical lower critical solution temperature behavior was observed in the moderate temperature range for this blend system. FTIR studies indicate that there are the competitive hydrogen bonding interactions upon adding PEO to the system, which was involved with the intramolecular and intermolecular hydrogen bonding interactions, i.e. -OH?OS, -OH?-OH and -OH versus ether oxygen atoms of PEO between PHES and PEO. In terms of the infrared spectroscopic investigation, it is judged that from weak to strong the strength of the hydrogen bonding interactions is in the following order: -OH?OS, -OH?-OH and -OH versus ether oxygen atoms of PEO.     

Miscibility and phase behavior in thermosetting blends of polybenzoxazine and poly(ethylene oxide)

Thermosetting polymer blends composed of polybenzoxazine (PBA-a) and poly(ethylene oxide) (PEO) were prepared via in situ curing reaction of benzoxazine (BA-a) in the presence of PEO, which started from the initially homogeneous mixtures of BA-a and PEO. Before curing, the BA-a/PEO blends displayed the single and composition-dependant glass transition temperatures (T_g's) in the entire blend composition, and the equilibrium melting point depression was also observed in the blends. It is judged that the BA-a/PEO blends are completely miscible. The miscibility was mainly ascribed to the contribution of entropy to mixing free energy since the molecular weight of BA-a is rather low. However, phase separation occurred after curing reaction at the elevated temperature, which was confirmed by differential scanning calorimetry (DSC) and scanning electronic microscopy (SEM). It was expected that the PBA-a/PEO blends would be miscible since PBA-a possesses a great number of phenolic hydroxyls in the molecular backbone, which are potential to form the intermolecular hydrogen bonding interactions with oxygen atoms of PEO and thus would fulfill the miscibility of the blends. To interpret the experimental results, we investigated the variable temperature Fourier transform infrared spectroscopy (FTIR) of the blends via model compound. The FTIR results indicate that the phenolic hydroxyl groups could not form the efficient intermolecular hydrogen bonding interactions at the elevated temperatures (e.g. the curing temperatures), i.e. the phenolic hydroxyl groups existed mainly in the non-associated form in the system. Therefore, the decrease of the mixing entropy still dominates the phase behavior of thermosetting blends at the elevated temperature.     

Ultra-fine polyelectrolyte fibers from electrospinning of poly(acrylic acid)

Ultra-fine polyelectrolyte fibers have been generated from electrospinning of poly(acrylic acid) in aqueous and DMF solutions. The fiber diameters ranged from 80 to 500 nm and increased with increasing solution concentrations and electrospinning voltages. The fibers generated from the aqueous solutions were more homogeneous in sizes, especially when NaCl or NaOH was added. Higher voltages in electrospinning of the aqueous solutions also resulted in fibers with larger heat capacity in the glass transition region, and higher dehydration temperatures. These polyelectrolyte fibers could be rendered water-insoluble by incorporating β-cyclodextrin (at 20 wt% of PAA) in the aqueous solution, then heat-induced crosslinking was performed at 140 °C for 20 min. The resulting hydrogel fibers showed strongly pH-responsive swelling behaviors.     

Time-resolved conformational analysis of poly(ethylene oxide) during the hydrogelling process

We investigated a drastic conformation change in a poly(ethylene oxide) (PEO) chain during the hydrogelation process using infrared (IR) spectroscopy and quantum chemical calculations (QCCs). Time-resolved in situ IR spectra of the hydrogelling process of a semi-crystalline PEO solid were measured using a flow-through cell. It was found from the time-resolved IR study that gauche conformations around the C-C bonds in the crystalline phase PEO chain maintain their conformations even after hydrogelation, while at least half of the trans conformations around the C-O bonds change into gauche conformations upon hydrogelling. With regard to the phenomena of these conformation changes after contacting water, the destruction and hydrogelation of the crystalline phase around the C-C bonds of the hydrophobic moiety occur prior to changes around the C-O bonds of the hydrophilic moiety. In addition, our QCC confirmed that the stable hydration structure of bridging water, wherein the two hydroxyl groups in a water molecule donate hydrogen bonds to every other ether oxygen atoms in the PEO chain.     

Tacticity effects on the miscibility behavior of poly(methyl methacrylate)/poly(ethylene oxide-b-dimethylsiloxane-b-ethylene oxide) blends

The miscibility of a triblock copolymer poly(ethylene oxide)-poly(dimethylsiloxane)-poly(ethylene oxide) with syndiotactic and isotactic poly(methylmethacrylate) wasstudied. Although isotactic poly(methyl methacrylate) (PMMA) was miscible with poly(ethylene oxide) (PEO) in the pure state, it was immiscible with the PEO end blocks in the copolymer. In comparison, the syndiotactic poly(methyl methacrylate) (sPMMA) was miscible with the PEO blocks as indicated by melting point depression, decrease in crystallinity, and slower rate of spherulite growth of PEO. When blends of the triblock copolymer were cooled to low temperatures, the poly(dimethylsiloxane) (PDMS) middle block which resided in the interlamellar region of PEO spherulites also crystallized; the development of PDMS crystals was clearly suppressed at high sPMMA contents.On leave from Union Chemical Laboratories, Industrial Technology Research Institute, Hsinchu, Taiwan     

Ultraviolet-induced crosslinking of solid poly(ethylene oxide)

Poly(ethylene oxide) (PEO) of molecular weight from 200,000 to 2,000,000 was crosslinked by exposure to ultraviolet radiation with a high-pressure 150 W mercury lamp. Photochemical crosslinking of PEO proceeds in the presence of photoinitiators such as benzophenone and acetophenone which act as a hydrogen-abstracting agent. Gel fraction yield exceeds 90%, and the number-average molecular weight between crosslinks determined by equilibrium swelling in chloroform varies from 3,000 to 100,000. The degree of crosslinking can be controlled by changing the irradiation temperature. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2299–2307, 1997