Synthesis and characterization of pH/temperature-sensitive block copolymers via atom transfer radical polymerization

In order to prepare well-defined pH-sensitive block copolymers with a narrow molecular weight distribution (MWD), we synthesized a pH-sensitive block copolymer via atom transfer radical polymerization (ATRP) of sulfamethazine methacrylate monomer (SM) and amphiphilic diblock copolymers by the ring-opening polymerization of d,l-lactide/?-caprolactone (LA/CL), and their sol-gel phase transition was investigated. SM, which is a derivative of sulfonamide, was used as a pH responsive moiety, while PCLA-PEG-PCLA was used as a biodegradable, as well as a temperature sensitive one, amphiphilic triblock copolymer. The pentablock copolymer, OSM-PCLA-PEG-PCLA-OSM, was synthesized using Br-PCLA-PEG-PCLA-Br as an ATRP macroinitiator. The number average molecular weights of SM were controlled by adjusting the monomer/initiator feed ratio. The macroinitiator was synthesized by the coupling of 2-bromoisobutyryl bromide with PCLA-PEG-PCLA in the presence of triethyl amine catalyst in dichloromethane. The resultant block copolymer shows a narrow polydispersity. The block copolymer solution shows a sol-gel transition in response to a slight pH change in the range of 7.2-8.0. Gel permeation chromatography (GPC) and NMR were used for the characterization of the polymers that were synthesized.     

Characterization of aqueous micellar solutions of amphiphilic block copolymers of poly(acrylic acid) and polystyrene prepared via ATRP. Toward the control of the number of particles in emulsion polymerization

A series of diblock, triblock and star-block copolymers composed of polystyrene and poly(acrylic acid) were synthesized by ATRP. The structure of the copolymers, the size of the blocks and the composition were varied, keeping however a short polystyrene block and a poly(acrylic acid) content larger than 60 mol% to allow solubility in alkaline water. Their micellization was studied by static and dynamic light scattering and the influence of their structural characteristics on the aggregation number, N_agg, was examined at low salt concentration and alkaline pH. It was shown that micelles were in thermodynamic equilibrium and that N_agg followed the power law N_agg∼N_A^−0.9N_S² (with N_A, the total number of acrylic acid units in the copolymer and N_S, the total number of styrene units), that is characteristic of amphiphile micelles formed from strongly segregated block copolymers. Moreover, N_agg was independent of salt concentration in the investigated range. The same copolymers were previously used as stabilizers in emulsion polymerization [Macromolecules 34 (2001) 4439]. The final latex particle concentration, N_p, was compared with N_m, the initial micelle concentration. This enabled us to conclude that among the block copolymers studied, those with high acid content behaved like low molar mass surfactants. In contrast, those with low acid content formed stable micelles that could be directly nucleated to create latex particles, allowing a good control over N_p.     

The amphiphilic block copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Synthesis by atom transfer radical polymerization and solution properties

Amphiphilic di- and tri-block copolymers of poly(methyl methacrylate) (PMMA) and poly(2-dimethylamino)ethyl methacrylate (PDMAEMA) have been synthesized by atom transfer radical polymerization (ATRP) at ambient temperature (35 °C) in the environment-friendly solvent, aqueous ethanol (water 16 vol%) using CuCl/o-phenanthroline as the catalyst. The PDMAEMA blocks are contaminated with ethyl methacrylate (EMA) residues to the extent of 1-2 mol% of DMAEMA depending on the length of the PDMAEMA block. The EMA forms through the autocatalyzed ethanolysis of the DMAEMA monomer and undergoes random copolymerization with the latter. The rate of ethanolysis is unexpectedly greater in the aqueous ethanol than in neat ethanol, which has been attributed to the higher polarity of the former than of the latter. In contrast to the ethanolysis no hydrolysis of DMAEMA in the aqueous ethanol medium could be detected for 133 h. The block copolymers form micelles in water. Their solubility and CMC in neutral water have been studied. Dynamic light scattering (DLS) studies reveal that for a fixed degree of polymerization (DP) of the PMMA block the hydrodynamic diameter of the micelles in methanolic water (water 95 vol%) increases at a faster rate with the DP of the PDMAEMA block when it is much greater than that of the PMMA block compared to when it is less than or close to that of the latter.     

Synthesis and association properties of thermoresponsive and permanently cationic charged block copolymers

Atom transfer radical polymerization (ATRP) was used to prepare thermosensitive cationic block copolymers of (3-acrylamidopropyl)-trimethylammonium chloride (AMPTMA) and N-isopropylacrylamide (NIPAAM) with different block lengths. By using ethyl-2-chloropropionate (ECP) as initiator and CuCl/CuCl₂/tris(2-dimethylaminoethyl)amine (Me₆TREN) catalytic system in DMF:water 50:50 (v/v) mixtures at 20 °C the polymerization was controlled. The association properties in NaCl aqueous solution were studied as a function of temperature and polymer concentration by dynamic light scattering, NMR spectroscopy, fluorescence spectroscopy and energy filtered-transmission electron microscopy. The block copolymers formed micellar aggregates above the lower critical solution temperature (LCST) of pNIPAAM. The LCST is strongly influenced by the relative length of the two blocks and is significantly higher than that of pure pNIPAAM. The size of core and shell of the micelles is discussed in terms of block copolymer composition.     

Amphiphilic star block copolymers: Influence of branching on lyotropic/interfacial properties

How can the degree of branching influence the lyotropic properties of amphiphilic block copolymers? In order to provide a qualitative answer to this question, we have prepared a library of poly(propylene sulfide)-bl-poly(ethylene glycol) (PPS-PEG) block copolymers, varying the hydrophobic block (PPS) length and its branching degree and thus producing diblock, triblock (that can be seen as two-armed star), tri-armed star and tetra-armed star structures. The PEG block, on the contrary, was kept constant (linear PEG2000).Although all the polymers exhibited a qualitatively similar lyotropic behaviour, an increased degree of branching of the hydrophobic block caused clear differences in the rheology of lyotropic phases, with an increasingly softer character, and in the organisation of the PEG chains, which appeared to adopt possibly more extended and dehydrated conformations.     

Synthesis and characterization of dendritic-linear-dendritic triblock copolymers based on poly(amidoamine) and polystyrene

Dendritic-linear-dendritic triblock copolymers composed of linear polystyrene (PSt) and poly(amidoamine) dendrons have been successfully synthesized. Two bromines-terminated PSt with M_n = 13,000 was prepared by atom transfer radical polymerization (ATRP) using α,α′-dibromo-p-xylene as initiator. Then the terminal bromines at both ends of PSt chains were replaced by one imine group of piperazine (PZ), and further Michael addition reaction of terminal PZ with excess 1,3,5-triacryloylhexahydro-1,3,5-triazine (TT) produced the first generation (G₁) of the triblock copolymer. Continuous growth of dendrons from G1.5 to G4 at the both ends of PSt chains was carried out by the iterative Michael addition reactions with excess PZ and following TT. The ABA triblock copolymers composed of the G₁-G₄ dendrons and the linear PSt were obtained. Structures of the triblock polymers were characterized by GPC and ¹H NMR spectra. Thermal phase transitions of the polymers were studied by DSC measurements, and all of the copolymers displayed a glass transition temperature.     

Amphiphilic poly(acrylic acid-b-styrene-b-isobutylene-b-styrene-b-acrylic acid) pentablock copolymers from a combination of quasiliving carbocationic and atom transfer radical polymerization

Amphiphilic poly(acrylic acid-b-styrene-b-isobutylene-b-styrene-b-acrylic acid) (PAA-PS-PIB-PS-PAA) block copolymers were prepared using a combination of quasiliving carbocationic and atom transfer radical polymerization (ATRP) techniques. Poly(styrene-b-isobutylene-b-styrene) (PS-PIB-PS) block copolymer macroinitiators with targeted molecular weights and high degrees of chain end functionality (F_n>1.7) were prepared by quasiliving carbocationic polymerization of isobutylene followed by sequential addition of styrene. Poly(tert-butyl acrylate-b-styrene-b-isobutylene-b-styrene-b-tert-butyl acrylate) (PtBA-PS-PIB-PS-PtBA) pentablock terpolymers with targeted molecular weights and low polydispersities (PDIs) were synthesized from the PS-PIB-PS macroinitiators via ATRP of tBA using either a Cu(I)Cl/1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2-(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. Deprotection of the tert-butyl groups using trifluoroacetic acid at 25 °C resulted in the formation of PAA-PS-PIB-PS-PAA pentablock terpolymers. Comonomer composition of the final terpolymers, determined by ¹H-NMR spectroscopy, was very close to theoretical.     

Synthesis of block copolymers from PDMS macroinitiators

The synthesis of polystyrene‐b‐polydimethylsiloxane‐b‐polystyrene (PSt‐b‐PDMS‐b‐PSt) copolymers is described. Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide resulting in the PDMS macroinitiators. The terminal alkyl bromide groups were then used as initiators for atom transfer radical polymerization (ATRP) to produce block copolymers. Using this technique, triblock copolymers consisting of a PDMS centre block and polystyrene terminal blocks were synthesized. ATRP of St from those macroinitiators showed linear increases in M_n with conversion, demonstrating the effectiveness of ATRP to synthesize a variety of inorganic/organic polymer hybrids. Copyright © 2004 Society of Chemical Industry     

Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

Synthesis of block copolymers for surface functionalization with stimuli-responsive macromolecules

Using block copolymers with poly(n-butyl acrylate) (PBA) as anchor block being capable to tether the temperature-responsive block poly(N-isopropylacrylamide) (PNIPAAm) to the surface, polysulfone (PSf) films were functionalized applying an adsorption/surface entrapment process. Homo and block copolymer synthesis was investigated applying atom transfer radical polymerization (ATRP) using tris(2-(dimethylamino)ethyl)amine (Me₆TREN), CuCl and N,N-dimethylformamide (DMF). On basis of the determined critical micelle concentration of the block copolymers, surface functionalization of PSf was performed from an aqueous solution containing 25 vol% dimethylacetamide. These functionalized surfaces exhibit reversible temperature dependent properties due to the lower critical solution temperature (LCST) of PNIPAAm as can be proven by contact angle measurement. Furthermore, the beneficial effect of the PBA block with adjusted molecular weight on the stability of these coatings was proven. This surface functionalization method has various potential applications and the resulting surfaces are anticipated to exhibit actively triggerable ‘chaotic’ properties as basis of an efficient anti-biofouling strategy.     

Synthesis of poly[dimethylsiloxane-block-oligo(ethylene glycol) methyl ether methacrylate]: an amphiphilic copolymer with a comb-like block

AB amphiphilic comb-like block copolymers of poly(oligo[ethylene glycol] methyl ether methacrylate) and polydimethylsiloxane were synthesised with a methodology based on atom transfer radical polymerization (ATRP). The anionic ring opening polymerisation of hexamethylcyclotrisiloxane followed by reaction with 3-(chlorodimethylsilyl) propyl 2-bromo-2-methylpropanoate propyldimethylchlorosilane gave suitable macroinitiators for the ATRP of oligo[ethylene glycol] methyl ether methacrylate. The latter synthetic procedure was optimised by performing a number of syntheses varying the reaction solvent, catalytic complex and the temperature used. Copolymers with relatively high polydispersity indices (M_w/M_n>1.3) could be synthesised at room temperature by employing a Cu(I)Br:N,N,N′,N′,N″-pentamethyldiethylenetriamine complex in n-propanol with Cu(II)Br. The optimum reaction conditions employed a Cu(I)Cl:N-(n-propyl)-2-pyridyl(methanimine) complex with an n-propanol/water mixture or toluene as solvent at 90 °C. This gave block copolymers of the desired molecular weights and polydispersity indices of less than 1.1. The block copolymers were characterised with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography.     

Novel amphiphilic diblock copolymers bearing acid-labile oxazolidine moieties: Synthesis, self-assembly and responsive behavior in aqueous solution

A novel oxazolidine based acid-labile monomer N-acryloyl-2,2-dimethyl-1,3-oxazolidine (ADMO) was synthesized and polymerized by reversible addition fragmentation chain transfer (RAFT) polymerization using poly(ethylene glycol) based chain transfer agent (PEG-CTA). The diblock copolymers PEG-b-PADMO were composed of hydrophilic PEG with fixed length and hydrophobic PADMO with different lengths, which formed core-shell micelles in water. Morphologies and sizes of micelles were obtained by transmission electron microscopy (TEM) and dynamic light scattering (DLS), which showed that the shapes of polymeric aggregates developed from small spherical micelles, worm-like micelles to larger size of vesicles, as the length of PADMO increased. The hydrolysis kinetics of the micelles was studied using ¹H NMR, DLS and release of loaded Nile Red dye, whose rate strongly depended on pH and micellar structure. It led to the disruption of polymeric micelles and concomitant release of the guest molecules, due to the transformation of hydrophobic PADMO into hydrophilic poly(2-hydroxyethyl acrylamide) (PHEAM).     

Adsorption of block copolymers at latex surface and their utilization in emulsion polymerization

Amphiphilic block copolymers have been investigated for their utilization in emulsion polymerization of butyl methacrylate. Special attention has been paid to the adsorption mechanism of the block copolymers from systematic measurements of equilibrium adsorption isotherms. A series of well-defined water-soluble amphiphilic block copolymers, composed of poly(butyl methacrylate) and poly(sodium methacrylate) blocks, were synthesized by anionic polymerization of butyl methacrylate and tert-butyl methacrylate followed by the thermal deprotection of the tert-butyl ester groups and final hydrolysis. The number density of emulsion polymer particles N_P varied as [copolymer]^α, α lying between 0.44 and 0.73 according to the hydrophilic content of the copolymers. In contrast with SDS taken as a reference emulsifier, the adsorption of the copolymers was very strong and this provided quite an efficient stabilization of the polymer particles during emulsion polymerization, even at low concentrations (<10⁻⁴ mol L⁻¹) and low coverages (<10% of the interfacial area).     

Synthesis of symmetric H-shaped block copolymer by the combination of ATRP and living anionic polymerization

A novel fluorescent dye labeled H-shaped block copolymer, (PMMA-Fluor-PS)₂-PEO-(PS-Fluor-PMMA)₂, is synthesized by the combination of atom transfer radical polymerization (ATRP) and anionic polymerization (AP). To obtain the designated structure of the copolymer, a macroinitiator, 2,2-dichloro acetyl-PEO-2,2-dichloro acetyl (DCA-PEO-DCA), was prepared from DCAC and poly(ethylene oxide). The copolymer was characterized by ¹H NMR, GPC and fluorescence spectroscopy.     

Synthesis, characterization and micelle formation of amphiphilic graft copolymers

The macromonomer method is a useful tool for the preparation of various graft copolymers with well-defined structure and composition. Macromonomers were prepared by anionic polymerization of styrene followed by a direct coupling reaction of polystyryllithium with an excess of vinylbenzyl chloride. The control of the terminal functional groups is particularly important to ensure the reactivity of macromonomers in the radical copolymerization; the degree of functionality was determined by both n.m.r. and u.v.-vis. spectroscopy to be from 85–99%. Graft copolymers were synthesized by radical copolymerization of (vinylbenzyl) polystyrene macromonomer with 2-hydroxyethyl methacrylate (HEMA), or with acrylic acid. The organization ability of the copolymers to form micelles was investigated by ¹H n.m.r. spectroscopy, and verified by their ability to stabilize emulsions. These copolymers were found to be effective surfactants for emulsion polymerization of polystyrene latexes. © 1997 Elsevier Science Ltd.     

Synthesis of well-defined star polymers and star block copolymers from dendrimer initiators by atom transfer radical polymerization

Novel polyarylether dendrimers with 1,3,5-tri(4-hydroxyphenoxy)benzene core, polybenzylether interior, and benzyl 2-bromoisobutyrate surface group (CMGn-Br, n=1-3, with functionality of 6, 12, and 24, respectively) were prepared by convergent procedure. ATRP of tert-butyl acrylate (tBA) and styrene (St) with CMGn-Br dendrimer initiators in the presence of CuBr/pentamethyldiethylenetriamine catalytic system was investigated in detail, and a series of well-defined dendrimer-like star PtBA and PSt with precise arm numbers were synthesized under suitable conditions. The quantitative initiation of the dendrimer initiators was demonstrated by high initiation efficiency, ¹H NMR spectra, hydrolysis, and MALLS/SEC approach. Star block copolymers comprising PSt and PtBA segments with low polydispersity (1.08<M_w/M_n<1.18) were also successfully synthesized using functional macroinitiators by block copolymerization. In addition, the thermal properties of the resultant polymers were characterized by DSC and TGA.     

Synthesis and characterization of amphiphilic conetworks based on multiblock copolymers

Model amphiphilic conetworks based on cross-linked block copolymers of the hydrophilic ionizable 2-(dimethylamino)ethyl methacrylate (DMAEMA, 25 nominal units per block) and the hydrophobic n-butyl methacrylate (BuMA, 5 nominal units per block) bearing three, five, seven and nine blocks were synthesized using group transfer polymerization. 1,4-Bis(methoxytrimethylsiloxymethylene)cyclohexane and ethylene glycol dimethacrylate were used as the bifunctional initiator and the cross-linker, respectively. Network synthesis was performed by sequential monomer/cross-linker additions to the reaction flask, which was pre-loaded with tetrabutylammonium bibenzoate (polymerization catalyst), tetrahydrofuran (THF, solvent), and initiator. All linear conetwork precursors were characterized using gel permeation chromatography and proton nuclear magnetic resonance spectroscopy and found to have molecular weights (MWs) and compositions reasonably close to the theoretically expected values. All polymer conetworks were characterized in terms of their degree of swelling (DS) in THF, in neutral water, and in aqueous media as a function of the solution pH. It was found that the DSs were highest in acidic pH due to the repulsive forces and the osmotic pressure developed by the ionization of the DMAEMA units. Intermediate values of the DSs were observed in THF, whereas the lowest DSs were measured in neutral water. In THF, the DSs increased with the MWs of the (final) linear (co)polymer precursors, while in acidic water the DSs increased with the DMAEMA content in the (co)networks.     

Synthesis of block copolymers by combination of ATRP and photoiniferter processes

BACKGROUND: Block copolymers of monomers polymerizing by different mechanisms can be prepared by the transformation approach. A wide range of combinations of different polymerization modes has been reported in the literature. In this work, the transformation approach was further extended to the preparation of block copolymers by combining atom transfer radical polymerization (ATRP) and photoiniferter processes. RESULTS: Photoactive morpholine‐4‐dithiocarbamate‐terminated polystyrene (MDC‐PS‐MDC) was prepared by the reaction of dibrominated polystyrene, obtained by ATRP, with morpholine‐4‐dithiocarbamate sodium salt in dimethylformamide. The structure of MDC‐PS‐MDC was confirmed by ¹H NMR and UV‐visible spectral analysis. The ability of MDC‐PS‐MDC to act as a photoiniferter for the block copolymerization of methyl acrylate was examined. The polymerization shows a ‘living’ character at up to 25% conversion and produces well‐defined polymers with molecular weights close to those predicted from theory and relatively narrow polydispersities (M_w/M_n ≈ 1.40). CONCLUSION: It is demonstrated that the end groups of polymers obtained by ATRP can be converted into morpholino‐4‐dithiocarbamate groups which act as photoiniferters. In this way, the desired mechanistic transformation between two controlled free radical polymerization methods can be achieved. Copyright © 2008 Society of Chemical Industry     

Poly(N-tert-butyl acrylamide-b-N-acryloylmorpholine) amphiphilic block copolymers via RAFT polymerization: Synthesis, purification and characterization

Amphiphilic block copolymers consisting of two poly(acrylamide) derivative blocks have been synthesized via the reversible addition fragmentation chain transfer (RAFT) polymerization process with a hydrophobic block, poly(N-tert-butyl acrylamide), poly(TBAm), and a non-ionic hydrophilic one, poly(N-acryloylmorpholine), poly(NAM). Both polymerization orders, poly(TBAm-b-NAM) and poly(NAM-b-TBAm), were compared in terms of conversion and control over molecular weights (MW). Purification of the block copolymers was carried out via several methods in order to optimize their subsequent characterization. ¹H NMR analysis resulted in an accurate determination of the second block MW whereas determination of the CMC by the pendant drop method confirmed the ability of the poly(TBAm-b-NAM) block copolymers to self-assemble into micelles in aqueous phase.     

Facile atom transfer radical homo and block copolymerization of higher alkyl methacrylates at ambient temperature using CuCl/PMDETA/quaternaryammonium halide catalyst system

Controlled polymerization of higher alkyl methacrylates, e.g. lauryl methacrylate (LMA) and stearyl methacrylate (SMA) has been successfully achieved by atom transfer radical polymerization (ATRP) at ambient temperature using CuCl/N,N,N′,N′,N″-pentamethyldiethylenetriamine (PMDETA)/tricaprylylmethylammonium chloride (Aliquat^®336) as the catalyst system and ethyl 2-bromoisobutyrate or 2,2,2-trichloroethanol as the initiator. Although the bulk polymerization gives satisfactory control, the latter becomes better when anisole or THF is added into the system. Without AQCl the control was lost. A large deviation of molecular weight from theory has been observed which has been attributed to the very high-molecular weight of the dead polymers formed during the building-up of the persistent radical. The controlled polymers have been used as macroinitiators for block (di, tri and penta) ATR copolymerization with several methacrylates.