共查询到20条相似文献,搜索用时 78 毫秒
1.
通过对犁臂三维测量、点云数据处理及三维模型重建整个过程的介绍,说明了如何利用逆向工程技术进行产品的再开发设计以及采用软件Imageware及UGNX完成此项技术的关键问题。并对模型的精度进行了检测。 相似文献
2.
3.
通过对金属刀盘的扫描及三维模型重构的应用实例,介绍逆向工程(RE)在工程产品开发中的应用;论述利用逆向工程软件Imageware对金属刀盘的点云数据进行处理和构造曲面的过程,以及采用三维软件UG NX进行三维造型的过程. 相似文献
4.
UG、Imageware在逆向工程三维模型重构中的应用研究 总被引:2,自引:0,他引:2
逆向工程技术是现代产品设计的一种重要手段,是消化和吸收先进技术的一种新方法,是先进制造技术的主力.三维CAD模型重构是逆向工程中的关键步骤.介绍了逆向工程的概念以及关键技术,全面分析了UG软件在逆向工程中的应用特点以及分析了利用UG进行曲面构造的方法和过程,总结了Imageware在数据点云处理优势以及进行数据处理的过程.利用学校现有的LSH-600型非接触式的三维激光扫描仪采集了汽车车身零件的几何数据,并详细介绍了数据采集的过程.最后结合Imageware和UG各自的优势,以汽车车身零件的三维模型的重构来讲述模型重构的过程. 相似文献
5.
6.
以机械装备零件中的滤清器上盖为研究对象,针对关节臂式三维激光扫描仪的特点,介绍了逆向工程中的数据测量方法,分析了影响测量精度的因素。基于非接触式测量点云数据的特征,从多视拼合、噪声去除、数据精简、数据平滑等方面对点云数据处理方法进行了研究,并提出有针对性的处理措施加以改善。最后对点云数据进行了基于Imageware软件的模型坐标系建立以及基于Geomagic Studio软件的零件曲面重建,为探索逆向工程在机械装备零件模型重建中的应用提供技术借鉴。 相似文献
7.
逆向工程技术已成为模具CAD/CAM的制造技术之一,以车灯罩壳模为例,首先利用三维激光测量仪对零件进行测量,获取三维点云数据,然后利用UG软件将得到的轮廓数据三维重构,得到实物原型的三维数字模型,最后进行模具CAD/CAM。采用逆向工程技术可以快速实现模具的设计与制造,同时大大缩短了整个产品的开发周期。 相似文献
8.
9.
10.
基于Imageware的汽车覆盖件逆向设计 总被引:1,自引:0,他引:1
简单介绍了Imageware在逆向工程中的运用及流程.以某款轿车发动机罩为例,采用激光非接触测量采集三维点云数据,利用Imageware软件对点云数据分割,并进行曲面重构及光顺处理. 相似文献
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献