OBS网络中基于优先级的先分割后缓存冲突解决方法

为了有效地降低突发包的丢失率和保证OBS网络中不同优先级业务的服务质量,提出了一种基于优先级的先分割后缓存冲突解决方法。该方法通过在多波长信道系统的输出数据信道上设置光纤延迟线组来缓存被分割的冲突突发包。当冲突发生时,首先基于突发包的优先级和处理完毕时间进行"竞争突发包头部分割或者原突发包尾部分割"处理;无冲突部分进行交换或者直接在事先预留的输出数据信道上处理,冲突部分的分割突发包进行光缓存。仿真结果表明,多波长信道系统中,高优先级突发包的丢失率低于低优先级突发包的丢失率。同时该方法在一定程度上可以有效地减少端到端的传输时延和整个网络的丢包率,从而提高整个OBS网络的性能。     

光突发交换网络中的突发包分段研究

光突发交换技术是近年来出现的一种新型光交换技术，资源竞争解决是其关键技术之一。本文研究了基于突发包分段的一种竞争解决方案，并提出相应的数学模型，通过仿真可知该理论模型很好地逼近实际。仿真结果也表明，该方案可以大幅度地降低OBS网络中的数据丢失率。     

OBS网络信道分级竞争解决方法研究

通过分析光突发交换网络突发数据包产生竞争的原因和现有的几种解决机制,提出了信道分级竞争解决方法,并对其性能进行仿真研究,得出了不同信道配置下突发数据包丢包率和平均处理时延曲线.结果表明,该方法可以有效的降低数据包丢失率,支持不同的业务需求,是一种实用的方案.     

多态OBS网络中基于信道整理的调度算法

多态光突发交换(POBS)网络能够有效地支持多种同步和异步业务的传输,但是其异步突发业务的丢失率较相同网络环境下的传统OBS丢失率要高。如何有效地对多态OBS中异步突发进行合理调度,是降低异步突发丢失率的关键所在。提出了一种基于信道整理的调度算法,将已经成功调度的突发重新调度到最合适的数据信道,使得信道资源得到充分的利用,从而降低了异步突发的丢失率。仿真结果表明,该算法能很好地降低多态OBS网络中异步突发的丢失率。     

光突发交换网络中基于抢占的突发编码机制

为了降低突发丢失率,在分析突发克隆的基础上,提出了一种基于抢占的突发编码机制。在源边缘节点,采用奇偶监督码对信息突发进行编码,并产生冗余突发。在核心节点,信息突发有条件地抢占冗余突发,减少了冗余突发对信息突发的竞争,降低了核心节点处的信息突发丢失率。目的边缘节点,利用冗余突发恢复出丢失的信息突发。提出的突发编码机制实现...     

OBS网络中基于拥塞避免的提前偏射路由研究

突发竞争是OBS(光突发交换)网络需要解决的关键问题,偏射路由作为一种有效的竞争解决方案而被广泛研究。文章提出了一种基于拥塞避免的提前偏射路由算法,利用周期性反馈的网络拥塞信息按一定概率提前偏射部分突发包。与传统的最短偏射路由算法相比,本算法达到了避免拥塞以及均衡网络负载的目的。仿真结果表明:文章所提算法在突发丢失率、吞吐量以及平均链路利用率方面性能都有所提高。     

基于DWR—OBS网络服务质量的研究

本文讨论了基于动态波长路由技术的光突发交换网络(DWR-OBS)中业务服务质量的关键技术,从传输时延和数据包的丢失率两个方面对DWR-OBS网的QoS进行分析,给出了数据传输时延和边缘节点的缓存容量之间定量的数学关系,详细分析了一种新的动态首选波长集(D-PWS)资源预留算法,给出了基于D-PWS预留算法的完全候选路径集(E-CPS)业务信道分配方案,用以控制DWR-OBS网络中各优先级业务的丢失率。使用OPNET Modeler对DWR-OBS网络进行仿真,并且讨论仿真结果。     

基于FDL和TWC的光突发竞争解决方案及性能分析

在光突发交换(OBS)网络中,突发竞争是影响网络性能的一个重要因素,因此如何有效地解决它,成了OBS网络非常重要的问题.在分析当前文献中的解决方案的优缺点后,提出了一种突发竞争解决方案的系统实现.该实现将光纤延迟线(FDL)时城缓存与波长转换器(TWC)波长变换、空城技术结合在一起,构造了一个基于前向转发缓存和反馈循环缓存的两级交换结构.最后从多方面对该系统实现的竞争解决有效性进行了性能分析和计算机仿真,结果表明:它在适当的业务强度(小于0.6)下,能有效改善突发丢失率和突发延迟;同时能降低系统所需的光器件数目.     

ATM网络中漏桶算法在突发业务输入时的性能分析

本文首先引入了描述分组图像业务的突发业务模型，分析了漏桶算法在突发业务输入时的性能；研究了各参数对业务服务质量的影响，研究结果表明，增大缓冲器容量可以降低信元丢失率，但会增大时延和时延抖动。     

ATM网络中漏桶算法在突发业务输入时的性能分析

本文首先引入了描述分组图像业务的突发业务模型;分析了漏桶算法在突发业务输入时的性能;研究了各参数对业务服务质量的影响。研究结果表明,增大缓冲器容量可以降低信元丢失率,但会增大时延和时延抖动。     

光突发交换网络基于优先级与突发包分割的光缓存方法

为了保证光突发交换(OBS)网络中不同优先级业务的服务质量(Qos)和有效地降低突发包的丢失率,提出了一种基于优先级与突发包分割的光缓存方法.该方法通过在输出数据信道上设置光纤延迟线组来缓存被分割的冲突突发包.当冲突发生时,基于突发包的优先级进行"竞争突发包头部分割或者原突发包尾部分割,,处理;无冲突部分进行交换或者直...     

Dynamic wavelength selection and delayed burst assignment schemes for Optical Burst Switching networks

Optical Burst Switching (OBS) has been proposed as a promising switching technology for the next generation of optical transport networks. In this paper, we address the issue of how to provide proportional differentiated services in OBS networks. Firstly, a Dynamic Wavelength Selection (DWS) scheme is introduced to provide proportional differentiated services in bufferless OBS networks by dynamically assigning more and longer periods of wavelengths to high priority classes. This scheme can also utilize wavelengths efficiently because the wavelengths are shared among different classes. Next, a Delayed Burst Assignment (DBA) scheme is introduced, by which bursts of the high priority class are given a higher probability for reserving wavelengths by scheduling the bursts of the low priority class with a delay to provide quality of service (QoS) in OBS networks. The integration of these two schemes provides proportional differentiated services and improves the burst loss performance by giving the burst head packet (BHP) two opportunities of scheduling its data burst (DB).     

突发包分割机制研究与仿真

对现有的突发包分割机制进行了研究,提出了一种新复合突发封装方法。分析和仿真表明,与原复合封装方法相比,改进后的方法在不增加端到端延时的情况下,将进一步减少高优先级数据的丢失率,保证其服务质量。     

基于部分冗余合并的OBS网络冲突解决机制

为了降低光突发交换网络中突发包的丢失率、减小网络延时、提高网络信道的利用率,采用了一种新型考虑优先级的基于冗余合并的突发包冲突解决机制。算法增加了回退信道作为保护信道,根据业务的优先级对冲突的突发包进行分段,使无法顺利传送的突发包碎片进入到回退信道;同时,考虑到网络中存在着很多短小而难以利用的信道资源,算法将回退信道里的突发包碎片进行多次克隆,多个克隆碎片和由上游节点到来的突发包合并成粒度可变的虚拟突发包发送,克隆碎片的优先级定义为最低,以保证不抢占正常突发包的信道资源。结果表明,相比以往的冲突解决算法,此算法具有较低的丢包率、相对小的延时率和优越的信道利用率。     

A framework of prioritized burst segmentation supporting controlled retransmission in OBS networks

In optical burst switching (OBS) networks, burst contentions in OBS core nodes may cause data loss. To reduce data loss, retransmission scheme has been applied. However, uncontrolled retransmission may increase network load significantly and data loss probability defeating the retransmission purpose. In addition, in a priority traffic existing OBS network, OBS nodes may apply different retransmission mechanisms to priorities bursts for quality-of-service (QoS) support. This study has developed a controlled retransmission scheme for prioritized burst segmentation to support QoS in OBS networks. Unlike previous works in the literature, we have set a different value to retransmission probability at each contention and propose a retransmission analytical model for burst segmentation contention resolution scheme. In addition, we have applied the proposed retransmission scheme to the prioritized burst segmentation for QoS support. We have taken into account the load at each link due to both fresh and retransmitted traffic, and have calculated the path blocking probability and byte loss probability (ByLP) for high-priority and low-priority burst to evaluate network performance. An extensive simulation has been proposed to validate our analytical model.     

Delay-on-Demand: A Signaling Protocol to Reduce Blocking Probability in Optical Burst-Switching Networks

Optical burst switching (OBS) is emerging as one promising switching paradigm for the next generation optical networks. To support multiple services in burst-switching networks, the OBS paradigm should support some quality-of-service (QoS) provisioning. A major design issue in such networks is to reduce the blocking probability of the bursts arising due to resource contention at the intermediate core router. In this paper, we propose a signaling protocol which we call ‘Delay-on-Demand’ (OBS-DoD), to reduce blocking probability and support QoS in optical burst-switching networks. The proposed scheme guarantees that at least one of the bursts succeeds depending on its priority, propagation delay from the ingress router, and the burst-size when contention occurs at the core router. For this, we use a control packet to delay, in case of a contention, the transmission of bursts at the ingress router. We compare the performance of our proposal, by simulation, with an earlier proposed scheme, and show that the proposed OBS-DoD outperforms the earlier scheme in reducing the blocking probability. For simulation, we generated bursty traffic using an M/Pareto distribution.     

A novel contention solution strategy based on priority for optical burst switching networks

A fundamental issue in optical burst switching (OBS) networks is to solve the burst contention for the core node. In this paper, a novel priority-based contention solution strategy for OBS networks is proposed. When the contention occurs, the burst priority is considered firstly, and then the burst segmentation method is used for the low priority bursts in this strategy. Ensuring the integrity of high priority bursts, part of the segmented bursts can be transmitted to the destination node via combining wavelength conversion and optical buffer method. Simulation results show that the proposed scheme not only ensures the integrity of high priority bursts, but also reduces the packet loss rate of the low priority bursts maximally, so that it can support good quality of service (QoS) for the network.     

A Novel Optical Burst Assembly Technique Based on a Dynamic Threshold Mechanism to Support Scalable QoS

In IP networks, coarse packet classification is a scalable QoS solution. Similarly, it can also be utilized to an OBS network. In order to match IP QoS requirements with the data processing capacity and flexibility of OBS networks, we propose a novel optical burst assembly technique, which is based on mapping rules and a dynamic threshold mechanism called ATQ-DT. How to map the IP QoS to burst priority is resolved by the mapping rules, and how to efficiently allocate the assembly capacity among classes belonging to the same priority is answered by ATQ-DT. This mechanism determines the maximum share for each class, which is proportional to the current unused capacity. Among the three mapping rules we propose, TQ-MAP is the most reasonable one because it considers both the traffic condition and the QoS requirement. As shown by simulation results, the assembly technique ATQ-DT with TQ-MAP can most remarkably improve the packets loss probability (PLP) to support QoS.     

A new composite assembly mechanism for supporting QoS in OBS networks

To provide the differential quality of service（QoS）for different classes of packets and reduce the packet loss probabil ity（PLP）,a novel priority-based composite assembly scheme for optical burst switching（OBS）networks is proposed The low and high packet classes are aggregated into a single burst simultaneously,and the highest-priority packets ar placed in the middle,while the low-priority packets are at the tail and head of the burst.The priority is lowered gradu ally from the middle to the ends.Simulation results demonstrate that the proposed assembly strategy not only guaran tees the integrity of the high-priority bursts,but also significantly reduces the average end-to-end delay of the burst and the PLP of network.So it can adapt to the flexible network with QoS requirement.