Baceridin,a Cyclic Hexapeptide from an Epiphytic Bacillus Strain,Inhibits the Proteasome

A new cyclic hexapeptide, baceridin ( 1 ), was isolated from the culture medium of a plant‐associated Bacillus strain. The structure of 1 was elucidated by HR‐HPLC‐MS and 1D and 2D NMR experiments and confirmed by ESI MS/MS sequence analysis of the corresponding linear hexapeptide 2 . The absolute configurations of the amino acid residues were determined after derivatization by GC‐MS and Marfey's method. The cyclopeptide 1 consists partially of nonribosomal‐derived D ‐ and allo‐D ‐configured amino acids. The order of the D ‐ and L ‐leucine residues within the sequence cyclo(‐L ‐Trp‐D ‐Ala‐D ‐allo‐Ile‐L ‐Val‐D ‐Leu‐L ‐Leu‐) was assigned by total synthesis of the two possible stereoisomers. Baceridin ( 1 ) was tested for antimicrobial and cytotoxic activity and displayed moderate cytotoxicity (1–2 μg mL^?1) as well as weak activity against Staphylococcus aureus. However, it was identified to be a proteasome inhibitor that inhibits cell cycle progression and induces apoptosis in tumor cells by a p53‐independent pathway.     

Structural Analysis Reveals the Substrate‐Binding Mechanism for the Expanded Substrate Specificity of Mutant meso‐Diaminopimelate Dehydrogenase

A meso‐diaminopimelate dehydrogenase (DAPDH) from Clostridium tetani E88 (CtDAPDH) was found to have low activity toward the D ‐amino acids other than its native substrate. Site‐directed mutagenesis similar to that carried out on the residues mutated by Vedha‐Peters et al. resulted in a mutant enzyme with highly improved catalytic ability for the synthesis of D ‐amino acids. The crystal structures of the CtDAPDH mutant in apo form and in complex with meso‐diaminopimelate (meso‐DAP), D ‐leucine (D ‐leu), and 4‐methyl‐2‐oxopentanoic acid (MOPA) were solved. meso‐DAP was found in an area outside the catalytic cavity; this suggested a possible two‐step substrate‐binding mechanism for meso‐DAP. D ‐leu and MOPA each bound both to Leu154 and to Gly155 in the open form of CtDAPDH, and structural analysis revealed the molecular basis for the expanded substrate specificity of the mutant meso‐diaminopimelate dehydrogenases.     

Stereocontrolled Synthesis and Pharmacological Evaluation of Azetidine‐2,3‐Dicarboxylic Acids at NMDA Receptors

The four stereoisomers of azetidine‐2,3‐dicaroxylic acid (L ‐trans‐ADC, L ‐cis‐ADC, D ‐trans‐ADC, and D ‐cis‐ADC) were synthesized in a stereocontrolled fashion following two distinct strategies: one providing the two cis‐ADC enantiomers and one giving access to the two trans‐ADC enantiomers. The four azetidinic amino acids were characterized in a radioligand binding assay ([³H]CGP39653) at native NMDA receptors: L ‐trans‐ADC showed the highest affinity (K_i=10 μM ) followed by the D ‐cis‐ADC stereoisomer (21 μM ). In contrast, the two analogues L ‐cis‐ADC and D ‐trans‐ADC were low‐affinity ligands (>100 and 90 μM , respectively). Electrophysiological characterization of the ADC compounds at the four NMDA receptor subtypes NR1/NR2A, NR1/NR2B, NR1/NR2C, and NR1/NR2D expressed in Xenopus oocytes showed that L ‐trans‐ADC displayed the highest agonist potency at NR1/NR2D (EC₅₀=50 μM ), which was 9.4‐, 3.4‐, and 1.9‐fold higher than the respective potencies at NR1/NR2A–C. D ‐cis‐ADC was shown to be a partial agonist at NR1/NR2C and NR1/NR2D with medium‐range micromolar potencies (EC₅₀=720 and 230 μM , respectively). A subsequent in silico ligand–protein docking study suggested an unusual binding mode for these amino acids in the agonist binding site.     

Synthesis of Amino Acid Conjugates and Further Derivatives of 3α‐Hydroxylup‐20(;29)ene‐23,28‐dioic acid

Triterpenes of betulinic acid type exhibit many interesting biological activities. Therefore a series of new 3α‐hydroxy‐lup‐20(29)‐ene‐23,28‐dioic acid derivatives 2a—22 with putative pharmacological activities were synthesized. As starting compounds 3α‐hydroxy‐lup‐20(29)‐ene‐23,28‐dioic acid ( 1a ), isolated from Schefflera octophylla, or its 3‐O‐acetyl derivative 1b were used. Mono‐ and diesters ( 2a—b from 1a , and 4d from 4c ) were prepared with CH₂N₂. Oxidation of the isopropenyl side chain with OsO₄ yielded the 20,29‐diols ( 4a—b from 1b , and 19 from 17 ), which were in the case of 4b further transformed to the 29‐norketones 8a/mdash;b . Oxidation of the isopropenyl side chain with m‐chloroperbenzoic acid afforded the 20,29‐epoxide 12 (from 1b ) and the 29‐aldehydes and a‐hydroxy aldehydes ( 13a—c from 2a, 14a—c from 2b , and 16a—c from 15a ). Ring A was modified by a tosylation—elimination sequence using p‐TsCl/NaOAc, which afforded diolefin 15a (from 2a ) with Δ^2,20(29) double bonds or 23‐nor‐Δ^3,20(29)diolefin 17 (from 1a ). Compounds 4b, 4c , and 8a were coupled with L ‐methionin, L ‐phenylalanin, L ‐alanin, L ‐serin, and L ‐glutaminic acid via amide bonds at positions 23 and 28 to afford the amino acid conjugates 5a—7b and 9a—11 .     

Screening for Amidases: Isolation and Characterization of a Novel D‐Amidase from Variovorax paradoxus

Using racemic tert‐leucine amide as sole nitrogen source in minimal medium, 162 strains were isolated by enrichment techniques and shown to contain amidase activity. Among these isolates three D ‐amidase producers were found and identified as Variovorax paradoxus (two strains) and Klebsiella spec. The D ‐amidase from Variovorax paradoxus was purified to homogeneity by three chromatographic steps. With dl ‐Tle‐amide as substrate Michaelis Menten kinetics were observed with a K_M of 0.74 mM, a K_I of 640 mM and a V_max of 1.4 U/mg. The amidase has a broad pH‐optimum between 7 and 9.5 and a temperature optimum at 47–49 °C. The amidase hydrolyzed amino acid amides as well as carboxamides and 2‐hydroxy acid amides. The stereoselectivity of the reaction was variable, however. Hydrolyzing dl ‐Tle‐amide the enantiomeric ratio E was >200 resulting in D ‐Tle with an ee of >99% and up to 47% conversion. Similar results were obtained with dl ‐Leu‐amide and dl ‐Val‐amide while dl ‐Phe‐amide was hydrolyzed with an enantiomeric ratio E of only 5.     

First Examples of Proline‐Catalyzed Domino Knoevenagel/Hetero‐Diels–Alder/Elimination Reactions

A novel and efficient one‐pot synthesis of lactones (pyranones) has been achieved by domino Knoevenagel/hetero‐Diels–Alder/elimination reactions of O‐ and N‐prenyl aldehyde derivatives with Meldrum's acid in the presence of L ‐ or D ,L ‐proline. The reaction proceeds cleanly at room temperature to afford cis‐ or trans‐fused products in good yields with high diastereoselectivity.     

Biodegradations of statistical copolymers composed of D,L‐lactide and cyclic carbonates

Syntheses and biodegradation of statistical copolymers of D ,L ‐lactide (D ,L ‐LA) with trimethylene carbonate (TMC), rac‐1‐methyltrimethylene carbonate (1‐MTMC) and 2,2‐dimethyltrimethylene carbonate (2,2‐DTMC) were investigated at various monomer ratios using SmMe(C₅Me₅)₂THF as an initiator at 80 °C for 24 h in toluene. Biodegradations of poly(D ,L ‐LA‐co‐racemo‐1‐MTMC) (95/5) and poly(D ,L ‐LA‐co‐2,2‐DTMC) (98/2) with a compost at 60 °C proceed rapidly. Enzymatic degradations of these polymers were also performed using cholesterol esterase, lipoprotein lipase and proteinase K. Only poly(D ,L ‐LA‐co‐TMC) was biodegraded with cholesterol esterase, while poly(TMC), poly(1‐MTMC), poly(2,2‐DTMC) and poly(D ,L ‐LA) were barely degraded with these enzymes. Biodegradations of poly(D ,L ‐LA‐co‐TMC) (87/13) and poly(D ,L ‐LA‐co‐racemo‐1‐MTMC) (95/5) are rapid using proteinase K. Physical properties of these copolymers were also described. © 2003 Society of Chemical Industry     

Kinetics of dehydration–polymerization of aspartic acid and synthesis of polyaspartate catalyzed by potassium bisulfate

The dehydration–polymerization kinetics of DL ‐ and L ‐aspartic acid, either in the absence or presence of KHSO₄, from 323 to 573 K, was studied by thermogravimetric analysis (TGA), and the synthesis of polyaspartate through the polymerization of L ‐aspartic acid was investigated by a thin‐layer polymerization method. The TGA results revealed that the dehydration–polymerization of both type of aspartic acids proceeds in two steps: first, the loss of one water molecule through the reaction of an amino group of one aspartic acid molecule and a hydroxyl group of another aspartic acid molecule, forming amide bonds, and secondly, the loss of another water molecule through the amide hydrogen and another hydroxyl group, leading to the formation of a succinimide ring. The kinetic parameters of the extrapolated onset temperatures of dehydration—the first and the second maxima—were obtained by a method similar to that of Ozawa–Flynn–Wall. The kinetic results indicate that the dehydration of L ‐aspartic acid is slightly more difficult than for DL ‐aspartic acid, and that the presence of potassium bisulfate effectively catalyzes the dehydration–polymerization of aspartic acid. In the synthesis of polyaspartate, the product with a weight‐average molecular mass (M_w) of 5000 g mol^?1 was obtained in the absence of catalyst. However, in the presence of potassium bisulfate, the products obtained had M_ws of up to 7000 g mol^?1 Copyright © 2003 Society of Chemical Industry     

Incorporation of manganese complexes into xylanase: new artificial metalloenzymes for enantioselective epoxidation

Here we report the best artificial metalloenzyme to date for the selective oxidation of aromatic alkenes; it was obtained by noncovalent insertion of Mn^III‐meso‐tetrakis(p‐carboxyphenyl)porphyrin [Mn(TpCPP), 1 ‐Mn] into a host protein, xylanase 10A from Streptomyces lividans (Xln10A). Two metallic complexes—N,N′‐ethylene bis(2‐hydroxybenzylimine)‐5,5′‐dicarboxylic acid Mn^III [(Mn‐salen), 2 ‐Mn] and 1 ‐Mn—were associated with Xln10A, and the two hybrid biocatalysts were characterised by UV–visible spectroscopy, circular dichroism and molecular modelling. Only the artificial metalloenzyme based on 1 ‐Mn and Xln10A was studied for its catalytic properties in the oxidation of various substituted styrene derivatives by KHSO₅: after optimisation, the 1 ‐Mn ‐ Xln10A artificial metalloenzyme was able to catalyse the oxidation of para‐methoxystyrene by KHSO₅ with a 16 % yield and the best enantioselectivity (80 % in favour of the R isomer) ever reported for an artificial metalloenzyme.     

Synthesis of PEGylated poly(amino acid) pentablock copolymers and their self‐assembly

Pentablock copolymers with an ABCBA architecture were synthesized by ring‐opening polymerization of N‐carboxyanhydrides of l ‐leucine and γ‐benzyl l ‐glutamate using an α, ω‐diamino poly(ethylene glycol) (PEG) as macroinitiator. Three different PEGs with molecular weights of 2000, 4600 and 10 000 Da were used and the poly(amino acid) (PAA) block lengths were set to a combined 10 and 40, respectively, repeat units for p(l ‐Leu) and 40 repeat units for p(l ‐Glu). The molecular architecture of the resulting pentablock copolymers was determined by the order of monomer addition. The living character of the N‐carboxyanhydride ring‐opening polymerization enables the formation of multiblock copolymers. The degree of polymerization for the PAA blocks matched the monomer/initiator ratio. A structural switch element, which controls the hydrophilicity of the pentablock copolymers, was incorporated in the form of the p(l ‐Glu) blocks. The pentablock copolymers became water soluble after hydrolyzing the benzyl ester protective groups. The pentablock copolymers self‐assembled into polymeric aggregates ranging in size between 160 and 340 nm. Hydrogels formed readily if the central PEG block had a molecular weight of at least 4600 Da and the terminal A‐blocks consisted of p(l ‐Leu). SEM images confirmed the size ranges of the polymeric aggregates and showed non‐distinct spherical aggregates. © 2016 Society of Chemical Industry     

Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Molecular‐imprinted nylon membranes for the permselective binding of phenylalanine as optical‐resolution membrane adsorbents

Nylon 6, nylon 6,6, and terephthalic phenylene polyamide (TPPP) were functionalized by phase‐inversion molecular imprinting to add L ‐phenylalanine recognition ability. Formic acid containing 20 wt % nylon and 8 wt % L ‐phenylalanine was used as the solvent for the cast solution of the imprinting process. The resultant porous membranes behaved as membrane adsorbents that separated the L /D mixture of the substrate. The imprinted nylon 6 and nylon 6,6 presented high selectivity to the L ‐form substrate with respect to the TPPP membranes, but the imprinted TPPP membranes showed higher binding capacity with 0.57 μmol/g for L ‐phenylalanine. The apparent partition coefficients of L ‐ and D ‐forms by the imprinted membranes were 6.8, 4.2, and 1.7 for nylon 6, nylon 6,6, and TPPP, respectively. The separation manner of the L ‐ and D ‐forms from the mixture was also confirmed by membrane filtration under 1.5 kgf/cm² of applied pressure. The imprinted nylon 6, nylon 6,6, and TPPP membranes had separation factors of L ‐ and D ‐phenylalanines of 1.1, 1.1, and 1.2, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 620–626, 2005     

Identification and Characterization of D‐Succinylase,and a Proposed Enzymatic Method for D‐Amino Acid Synthesis

Chiral amino acids are important intermediates for the pharmaceutical industry. We have developed a novel one‐pot enzymatic method for D ‐amino acid synthesis by the dynamic kinetic resolution of N‐succinyl‐dl ‐amino acids using D ‐succinylase (DSA) and N‐succinylamino acid racemase (NSAR, EC 4.2.1.113). The DSA from Cupriavidus sp. P4‐10‐C, which hydrolyzes N‐succinyl‐D ‐amino acids enantioselectively to their corresponding D ‐amino acids, was identified for the first time by screening soil microorganisms. Subsequently, the DSA gene was cloned and overexpressed in Escherichia coli. DSA was shown to comprise two subunits with molecular masses of 26 kDa and 60 kDa. Additionally, the NSAR gene from Geobacillus stearothermphilus NCA1503, which racemizes N‐succinylamino acids, was also cloned and overexpressed in E. coli. The highly purified DSA and NSAR prepared from each recombinant E. coli were characterized and used for D ‐amino acid synthesis. A one‐pot enzymatic method converted 100 mM N‐succinyl‐dl ‐phenylalanine to D ‐phenylalanine in 91.1% conversion with 86.7% ee. This novel enzymatic method may be useful for the industrial production of many D ‐amino acids.

     

Syntheses of poly(lactic acid‐co‐glycolic acid) serial biodegradable polymer materials via direct melt polycondensation and their characterization

The optimal synthetic conditions of poly(lactic acid‐co‐glycolic acid) (PLGA) via melt copolycondensation directly from L ‐lactic acid (L ‐LA) and glycolic acid (GA) with a feed molar ratio of 50/50 are discussed; the important drug‐delivery carrier PLGA50/50 is used as a special example. With reaction conditions of 165°C and 70 Pa and with 0.5 wt % SnCl₂ as the catalyst, 10 h of polymerization gave the L ‐PLGA50/50 with the biggest intrinsic viscosity ([η]), 0.1993 dL/g. The optimal synthetic conditions were verified by the synthesis of D,L ‐PLGA50/50 with D,L ‐lactic acid (D,L ‐LA) instead of L ‐LA, but the biggest [η] was 0.2382 dL/g. Under the same synthetic conditions with L ‐LA and D,L ‐LA as starting materials, serial PLGA with different molar feed ratios, including 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100, were synthesized via simple and practical direct melt copolycondensation, and their solubilities were investigated. When the glycolic acid feed molar percentage was equal to or more than 70%, solubilities in tetrahydrofuran and CHCl₃ became worse, and some samples were even wholly insoluble. These biodegradable polymers were also systematically characterized with gel permeation chromatography, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry, and X‐ray diffraction. PLGA synthesized from L ‐LA and D,L ‐LA had many differences in weight‐average molecular weight (M_w), glass‐transition temperature, crystallinity, and composition. When the molar feed ratio of LA to GA was 50/50, both the [η] and M_w values of D,L ‐PLGA were higher than those of L ‐PLGA. With D,L ‐LA as the starting material, the structure of the PLGA copolymer was relatively simple, and its properties were apt to be controlled by its GA chain segment. When the feed molar percentage of the monomer (LA or GA) was more than or equal to 90%, the copolymer was apt to be crystalline, and the aptness was more obvious for the L ‐LA monomer. The composition percentage of GA in PLGA was not only higher than the feed molar percentage of GA, but also, the GA percentage in D,L ‐PLGA was higher than in L ‐PLGA. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 244–252, 2006     

Study of the shade tabs of the toothguide 3D master through cluster analysis

To find out whether the 26 shade tabs of the Toothguide 3D Master can be grouped according to the five groups of lightness proposed by the manufacturer (Vita‐Zahnfabrik) the three color coordinates L*, C*, and h were studied. Upper central incisor color was measured through the Easyshade Compact spectrophotometer using 1361 participants aged between 16 and 89. The color of the middle third was registered in the Toothguide 3D Master nomenclature and in the CIELCh‐system. Principal Component Analysis and Cluster analysis, were applied for data processing. The statistical analysis reveals the existence of five cluster groups. Cluster 1 comprises samples 1M1 ‐ 2L1.5 ‐ 2M1 ‐ 2R1.5 ‐ 3L1.5 ‐ 3M1. Cluster 2 comprises 1M2 ‐ 2L2.5 ‐ 2M2 ‐ 2M3 ‐ 2R2.5 ?3M2 ‐ 3L2.5. Cluster 3 comprises 3R1.5 ‐ 4L1.5 ‐ 4L2.5 ‐ 4M1 ‐ 4M2 ‐ 4R1.5 ‐ 5M1. Cluster 4 comprises 3M3 ‐ 3R2.5 ‐ 4M3 ‐ 4R2.5. And, finally, Cluster 5 comprises: 5M2 ‐ 5M3. The 26 shade tabs in the Toothguide 3D Master can be grouped into five clusters following coordinates L*, C*, and h resulting from the dental spectrophotometer Vita Easyshade compact. The shade tabs that compose each cluster do not belong to the same lightness group. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 194–200, 2015     

Synthesis and characterization of biodegradable block copolymer pluronic‐b‐poly(L‐lysine)

This study presented the investigations on the synthesis of a novel biodegradable block copolymer of pluronic‐b‐poly(L ‐lysine) (pluronic‐b‐PLL), which combined the characteristics of aliphatic polyester and poly(amino acids). The synthesis work started with end‐capping of pluronic with N‐t‐butoxycarbonyl‐L ‐phenylalanine using dicyclohexylcarbodiimide in the presence of 4‐dimethylaminopyridine, followed by a deprotection process to obtain the amino‐terminated pluronic; the new primary amino group in the modified pluronic initiated ring‐opening polymerization of amino acid N‐carboxyanhydride, which afforded the pluronic‐b‐poly(N^ε‐(Z)‐L ‐lysine) block copolymer. Finally, removal of the side‐chain N^ε‐(carbonybenzoxy) end protecting groups yields the block copolymer of pluronic‐b‐PLL. The products were characterized by ¹H‐NMR, FTIR, DSC, and GPC. The block copolymer micelle containing the anticancer drug paclitaxel was prepared by the double emulsion method. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

STD‐NMR Studies Suggest that Two Acceptor Substrates for GlfT2, a Bifunctional Galactofuranosyltransferase Required for the Biosynthesis of Mycobacterium tuberculosis Arabinogalactan,Compete for the Same Binding Site

The mycobacterial cell wall is a complex architecture, which has, as its major structural component, a lipidated polysaccharide covalently bound to peptidoglycan. This structure, termed the mycolyl–arabinogalactan–peptidoglycan complex, possesses a core galactan moiety composed of approximately 30 galactofuranosyl (Galf) resides attached via alternating β‐(1→6) and β‐(1→5) linkages. Recent studies have shown that the entire galactan is synthesized by the action of only two bifunctional galactofuranosyltransferases, GlfT1 and GlfT2. We report here saturation‐transfer difference (STD) NMR spectroscopy studies with GlfT2 using two trisaccharide acceptor substrates, β‐D ‐Galf‐(1→6)‐β‐D ‐Galf‐(1→5)‐β‐D ‐Galf‐O(CH₂)₇CH₃ ( 2 ) and β‐D ‐Galf‐(1→5)‐β‐D ‐Galf‐(1→6)‐β‐D ‐Galf‐O(CH₂)₇CH₃ ( 3 ), as well as the donor substrate for the enzyme, UDP‐Galf. Competition STD‐NMR titration experiments and saturation transfer double difference (STDD) experiments with 2 and 3 were undertaken to explore the bifunctionality of this enzyme, in particular to answer whether one or two active sites are responsible for the formation of both β‐(1→5)‐ and β‐(1→6)‐Galf linkages. It was demonstrated that 2 and 3 bind competitively at the same site; this suggests that GlfT2 has one active site pocket capable of catalyzing both β‐(1→5) and β‐(1→6) galactofuranosyl transfer reactions. The addition of UDP‐Galf to GlfT2 in the presence of either 2 or 3 generated a tetrasaccharide product; this indicates that the enzyme was catalytically active under the conditions at which the STD‐NMR experiments were carried out.     

Syntheses of poly(lactic acid)‐poly(ethylene glycol) serial biodegradable polymer materials via direct melt polycondensation and their characterization

Directly starting from lactic acid (LA) and poly(ethylene glycol) (PEG), biodegradable material polylactic acid‐polyethylene glycol (PLEG) was synthesized via melt copolycondensation. The optimal synthetic conditions, including prepolymerization method, catalyst kinds and quantity, copolymerization temperature and time, LA stereochemical configuration, feed weight ratio m_LA/m_PEG and M_n of PEG, were all discussed in detail. When D ,L ‐LA and PEG (M_n = 1000 Da) prepolymerized together as feed weight ratio m_{D ,l‐LA}/m_PEG = 90/10, 15 h copolycondensation under 165°C and 70 Pa, and 0.5 wt % SnO as catalyst, gave D ,L ‐PLEG1000 with the highest [η] of 0.40 dL/g, and the corresponding MW was 41,700 Da. Using L ‐LA instead of D ,L ‐LA, 10 h polymerization under 165°C and 70 Pa, and 0.5 wt % SnO as catalyst, gave L ‐PLEG1000 with the highest [η] of 0.21 dL/g and MW of 15,600 Da. Serial D ,L ‐PLEG with different feed weight ratio and M_n of PEG were synthesized via the simple and practical direct melt copolycondensation, and characterized with FTIR, ¹H NMR, GPC, DSC, XRD, and contact angle testing. D ,L ‐PELG not only had higher MW than PDLLA, PLLA and L ‐PELG, but also better hydrophilicity than PDLLA. The novel one‐step method could be an alternative route to the synthesis of hydrophilic drug delivery carrier PLEG instead of the traditional two‐step method using lactide as intermediate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 577–587, 2006     

Alanine Scan of the Peptide Antibiotic Feglymycin: Assessment of Amino Acid Side Chains Contributing to Antimicrobial Activity

The antibiotic feglymycin is a linear 13‐mer peptide synthesized by the bacterium Streptomyces sp. DSM 11171. It mainly consists of the nonproteinogenic amino acids 4‐hydroxyphenylglycine and 3,5‐dihydroxyphenylglycine. An alanine scan of feglymycin was performed by solution‐phase peptide synthesis in order to assess the significance of individual amino acid side chains for biological activity. Hence, 13 peptides were synthesized from di‐ and tripeptide building blocks, and subsequently tested for antibacterial activity against Staphylococcus aureus strains. Furthermore we tested the inhibition of peptidoglycan biosynthesis enzymes MurA and MurC, which are inhibited by feglymycin. Whereas the antibacterial activity is significantly based on the three amino acids D ‐Hpg1, L ‐Hpg5, and L ‐Phe12, the inhibitory activity against MurA and MurC depends mainly on L ‐Asp13. The difference in the position dependence for antibacterial activity and enzyme inhibition suggests multiple molecular targets in the modes of action of feglymycin.     

α‐Amino acids as initiators of ε‐caprolactone and L,L‐lactide polymerization

Biodegradable polymers/oligomers were successfully synthesized through a ring‐opening polymerization of ε‐caprolactone and L ,L ‐lactide, initiated by L ‐arginine and L ‐citrulline. The α‐amino acid initiators are natural, operationally simple, inexpensive, environmentally friendly and safe for human health. The polymerizations were performed with no solvents and without introducing any metal impurities. The chemical structures of the polymers obtained were elucidated using ¹H NMR, ¹³C NMR and Fourier transform infrared spectroscopies. In addition, incorporation of α‐amino acid molecules into the polymer chain was confirmed using matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry. Due to the significant biological activity of L ‐arginine and L ‐citrulline, these α‐amino acid initiators may open a new route for the synthesis of functional polymers especially for pharmaceutical applications. Copyright © 2011 Society of Chemical Industry