Antibacterial activity of resin-containing triethylenetetramine side chains and/or thiol groups–metal complexes

Four chelating resins containing triethylenetetramine side chains and/or thiol groups were made from macroreticular 2,3-epithiopropyl methacrylate, styrene–divinylbenzene (DVB), or methyl methacrylate–DVB copolymer beads, and then the resins bearing metal ions such as Ag⁺, Cu²⁺, and Zn²⁺ were made. The antibacterial activity of the resins bearing metal ions against Escherichia coli (E. coli) or Staphylococcus aureus (S. aureus) was investigated. The resins containing thiol groups showed the higher adsorption capacity for silver ions than for other metal ions. The resins, which contain both triethylenetetramine side chains and thiol groups, bearing silver ions (RE-TTA-Ag) exhibited high antibacterial activity against bacteria, especially E. coli, without the residual silver ions in water after contacting with bacteria. The activity of the RE-TTA-Ag did not decrease even after reusing several time. © 1996 John Wiley & Sons, Inc.     

Studies on selective adsorption resins. XXI. Preparation and properties of macroreticular chelating ion exchange resins containing phosphoric acid groups

Macroreticular cation exchange resins containing phosphoric acid groups (RGP) were prepared by the reaction of glycidyl methacrylate–divinylbenzene copolymer [or poly(glycidyl methacrylate)]beads (RG) with phosphoric acid or phosphorous oxychloride, and the adsorption behavior of metal ions on the RGP was investigated. The phosphorylation of the polymer beads could be effectively carried out by treatment of the polymer beads with 85% phosphoric acid at 80°C for 3 h. The RGP obtained from glycidyl methacrylate–divinylbenzene (2 mol %) copolymer beads showed high cation exchange capacity, salt splitting capacity, and adsorption capacity for Cu²⁺, Zn²⁺, Cd²⁺, Ca²⁺, and Ag⁺. On the other hand, the RGP obtained from poly(glycidyl methacrylate)beads had high adsorption capacity for Al³⁺, Fe³⁺, and UO₂²⁺. The RGP prepared by treating the RG with phosphoric acid had a higher selective adsorption for Li⁺ than for Na⁺.     

Preparation of Chelating Resins Containing a Pair of Neighboring Carboxylic Acid Groups and the Adsorption Characteristics for Heavy Metal Ions

Abstract

For the functional enhancement of chelating resins containing carboxylic acids, copolymer beads were prepared by suspension polymerization of styrene (St), methyl methacrylate (MMA), and divinylbenzene (DVB) in the presence of toluene as diluent. The phenyl rings of the beads were directly chloromethylated, and the carboxylic ester groups of the beads were converted into hydroxymethyl groups by reduction followed by chlorination to give chloromethyl groups, respectively. The chelating resins containing a pair of neighboring carboxylic acid groups (NCAGs) were obtained by the alkylation of chloromethyl groups in copolymer beads with diethyl malonate in the presence of sodium hydride followed by hydrolysis using aqueous alkali solution. Accordingly, the structural effects of the resins on the adsorption of heavy metal ions were investigated. Poly(St‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, and Cu²⁺, whereas poly(MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Cu²⁺, Cd²⁺, and Co²⁺. On the other hand, poly(St‐co‐MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, Co²⁺, and Cu²⁺: a synergistic effect on the adsorption of heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, and Co²⁺ was observed. The adsorption ability of poly(St‐co‐MMA‐co‐DVB)‐based chelating resin among three kinds of chelating resins was relatively good.     

Formation of thermosensitive copolymer beads having phosphinic acid groups and adsorption ability for metal ions

Hydrophilic thermosensitive copolymer beads having phosphinic acid groups were prepared by suspension copolymerization of acryloyloxypropyl n‐octylphosphinic acid (APPO), N‐isopropyl acrylamide (NIPAAm), and tetraethyleneglycol dimethacrylate (4G). The thermosensitivity and the adsorption ability of the copolymer beads for metal ions beads were studied. The APPO‐NIPAAm‐4G copolymer beads were obtained in a good yield by suspension copolymerization of monomers (APPO, NIPAAm, and 4G) dissolved in chloroform, in a saturated Na₂SO₄ aqueous solution in the presence of surfactant and MgCO₃. The APPO‐NIPAAm‐4G copolymer beads had higher adsorption ability for lanthanide metal ions (Eu³⁺, Sm³⁺, Nd³⁺, or La³⁺) than for main transition metal ions (Cu²⁺, Ni²⁺, or Co²⁺). Furthermore, it was also found that the APPO‐NIPAAm‐4G copolymer beads had selective adsorption ability between lanthanide metal ions, and the order of adsorption ability for lanthanide metal ions was as follows: Eu³⁺ > Sm³⁺ > Nd³⁺ > La³⁺. The selective adsorption for these metal ions from their mixed solutions was performed by both a batch method and a column method. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 449–460, 2006     

Synthesis of chelating resins with iminodiacetic acid and its wastewater treatment application

The chelating resins have high potential applications for the selective removal and recovery of metal ions from industrial waste solutions. The hydrophilic acrylate monomer with the iminodiacetic acid chelating group was prepared from glycidyl methacrylate and iminodiacetic acid at 60°C. The microbeads, prepared from acrylate monomer with the iminodiacetic acid chelating group, were employed by inversion suspension polymerization. In the pH range of 2–6, a reasonably good equilibrium sorption capacity is maintained for Cr³⁺ (ca. 2.7 mmol/g) and Cu²⁺ (ca. 1.8 mmol/g) in the chelating resins. The adsorption of Cd²⁺ and Pb²⁺ on microbeads is clearly affected by the pH of the solution, such that these ions' adsorption capacity increased with the pH of the aqueous solution. The adsorption of Cd²⁺ (ca. 1.25–1.87 mmol/g) and Pb²⁺ (ca. 0.99–1.89 mmol/g) showed a maximum at approximately pH = 5 and 6, respectively. The adsorption isotherms of Cr³⁺ and Cu²⁺ adsorbed on microbeads were following the Langmuir isotherm, but the adsorption behavior of Cd²⁺ and Pb²⁺ were not. The concentration of alkaline earth–metal cations on the range of 0–200 ppm had no influence on metal ions adsorbed capacity of chelating resins. Additionally, NTA (nitrilotriacetic acid) had no significant influence on metal ion adsorption by chelating resins. Furthermore, phenol pollutant can be adsorbed effectively by metal ions chelated microbeads; therefore, the microbeads were useful not only in recovering metal ions but also in the treating phenol pollutants in wastewater. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1353–1362, 2002; DOI 10.1002/app.10243     

Synthesis of a polyacrylamide chelating resin and applications in metal ion extractions

A series of differently crosslinked polyacrylamide chelating resins were prepared, using N,N′-methylene-bis-acrylamide as the crosslinking agent. The crosslinked resins were functionalized by the reaction with ethylene diamine to get amino group capacities varying from 4.2 to 1.1 mequiv/g. The maximum adsorption capacities of the lightly crosslinked resin for Fe³⁺, Fe²⁺, Ni²⁺, and Cu²⁺ are 3.62, 4.22, 1.48, and 1.67 mequiv/g, respectively. The adsorbed metal ions can be quantitatively desorbed. The adsorption rate and the influence of pH on the adsorption of metal ions were examined. The resins can be used for the separation between different metal ions as well as the ions in different valence states (e.g., Fe³⁺ and Fe²⁺). The resin is amenable for continuous process and can be regenerated several times.     

SPOTLIGHT ON MANUFACTURING TRENDS IN JAPAN

Three reactive and functional polymers were synthesized by reacting formaldehyde with the phenolic Schiff bases derived from 4,4′-diaminodiphenylsulfone and o-, m-, and p-hydroxybenzaldehydes, respectively. The metal ion uptake behavior of these resins towards Cu²⁺, Ni²⁺, Co²⁺, and UO₂ ²⁺ ions in dilute aqueous media was studied. The optimum conditions for the absorption of metal ions were determined by varying the various parameters like contact time, size of the sorbents, concentration of the metal ion solutions, and the pH of the reaction medium. Suitable conditions were ascertained for preferential adsorption of the above metal ions from the salt solutions containing other interfering ions such as Na⁺, K⁺, and Mg²⁺. Presence of these alkali and alkaline earth metal ions in the salt solutions did not affect the adsorption behavior of the resins. It was observed that the structural features of the resins have a profound effect on the uptake characteristics. The position of the OH group present in the meta position with respect to the imine nitrogen atom in the resin, demonstrated a significant influence on the extent of metal ion adsorption by the resin. Out of the three resins reported here, the resin derived from the Schiff base of m-hydroxybenzaldehyde-4,4′-diaminodiphenylsulfone showed higher efficiency in uptake of metal ions from the solutions than the corresponding resins derived from the Schiff bases of o- and p-hydroxybenzaldehyde-4,4′-diaminodiphenylsulfone.     

Conversion of soybean oil into ion exchange resins: Removal of copper (II), nickel (II), and cobalt (II) ions from dilute aqueous solution using carboxylate‐containing resin

An ion‐exchange resin containing carboxylic acid groups was prepared by reaction of epoxidized soybean oil with triethylene tetramine, followed by hydrolysis of glycerides by using sodium hydroxide solution. The cation exchange capacity of the resins was determined to be 3.50 mequiv/g. The adsorption capacity for Cu²⁺, Ni²⁺, and Co²⁺ on the obtained resin at pH 5.0 was found to be 192, 96, and 78 mg/g, respectively. Effect of pH on the adsorption capacity for copper (II), nickel (II), and cobalt (II) ions were also studied. Cu²⁺, Ni²⁺, and Co²⁺ were adsorbed at a pH above 3. These metal ions adsorbed on the resin are easily eluted by using 1N HCl solution. The selectivity of the resin for Cu²⁺ from mixtures containing Cu²⁺/Co²⁺/Ni²⁺ ions in the presence of sodium chloride was also investigated © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2386–2396, 2002     

Preparation of macroreticular chelating resins containing dihydroxyphosphino and/or phosphono groups and their adsorption ability for uranium

The macroreticular chelating resins (RSP, RSPO, RCSP, and RCSPO) containing dihydroxy-phosphino and/or phosphono groups were prepared and their adsorption capacity for UO₂²⁺ and the recovery of uranium from sea water were investigated. RSP and RCSP were prepared by phosphorylation of macroreticular styrene–divinylbenzene copolymer beads and the chloromethylated copolymer beads, respectively. RSPO and RCSPO were prepared by oxidation of RSP and RCSP, respectively. The order of recovery of uranium from sea water with these four resins is as follows: RCSPO ? RCSP > RSPO > RSP. The adsorption of uranium in sea water was not only affected by the chemical structure, but also by physical structure of the resins. Uranium absorbed on the resins was eluted with 0.25 ～ 1 mol·dm^?3 Na₂CO₃ or NaHCO₃ solution by batch and column methods. The average recovery ratios of uranium from sea water with Na-form and H-form RCSP on 10 recycles were 84.9% and 90.5%, respectively, when 20 dm³ of sea water was passed through the column (resin 4 cm³, 10 mm ? × 50 mm) at the space velocity of 60 h^?1. RCSP has a high physical stability and resistance against acid and alkali solution.     

Formation of thermosensitive water‐soluble copolymers with phosphinic acid groups and the thermosensitivity of the copolymers and copolymer/metal complexes

Thermosensitive and water‐soluble copolymers were prepared through the copolymerization of acryloyloxypropyl phosphinic acid (APPA) and N‐isopropyl acrylamide (NIPAAm). The thermosensitivity of the copolymers and copolymer/metal complexes was studied. The APPA–NIPAAm copolymers with less than 11 mol % APPA moiety had a lower critical solution temperature (LCST) of approximately 45°C, but the APPA–NIPAAm copolymers with greater than 21 mol % APPA moiety had no LCST from 25 to 55°C. The APPA–NIPAAm copolymers had a higher adsorption capacity for Sm³⁺, Nd³⁺, and La³⁺ than for Cu²⁺, Ni²⁺ and Co²⁺. The APPA–NIPAAm (10:90) copolymer/metal (Sm³⁺, Nd³⁺, or La³⁺) complexes became water‐insoluble above 45°C at pH 6–7, but the APPA–NIPAAm (10:90) copolymer/metal (Cu²⁺,Ni²⁺, or Co²⁺) complexes were water‐soluble from 25 to 55°C at pH 6–7. The temperature at which both the APPA–NIPAAm copolymers and the copolymer/metal complexes became water‐insoluble increased as the pH values of the solutions increased. The APPA–NIPAAm copolymers were able to separate metal ions from their mixed solutions when the temperature of the solutions was changed; this was followed by centrifugation of the copolymer/metal complexes after the copolymers were added to the metal solutions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 116–125, 2004     

Preparation and uranyl ion adsorptivity of macroreticular chelating resins containing phosphono groups

Macroreticular copolymer beads were prepared by suspension polymerization of styrene, bis(2-chloroethyl) vinyl phosphonate (CEVP) and divinylbenzene (DVB) in the presence of toluene as diluent. The bis(2-chloroethyl) phosphonate groups on the bead surface were converted into phosphono groups by hydrolysis with dilute nitric acid. For the additional enrichment of phosphono groups, the copolymers were phosphorylated at the phenyl rings with phosphorus trichloride in the presence of aluminum chloride and hydrolyzed and oxidized with dilute nitrics acid. The investigations on metal ion chelation characteristics of the bead-type copolymers revealed that they have very high adsorptivity toward uranyl ions and good chemical resistance under acidic and alkaline media. It was also found that the phosphono group-containing copolymer beads are effective adsorbents for other heavy metal ions such as Pb²⁺, Hg²⁺, Cd²⁺, and Cu²⁺.     

Studies of Selective Adsorption Resins. XXII. Removal and Recovery of Arsenic Ion in Geothermal Power Waste Solution with Chelating Resin Containing Mercapto Groups

Abstract

Removal and recovery of harmful arsenic ion in a geothermal power waste solution with three macroreticular chelating resins containing mercapto groups were investigated. The resin (RES), which was prepared from 2,3-epithiopropyl methacrylate-divinylbenzene copolymer beads, exhibited high affinity for arsenic(III) ion and high resistance against hot water. In the column method, arsenic(III) ion in an aqueous solution was favorably adsorbed on the RES when the sodium arsenite solution (pH 6.2) containing 3 mg/dm³ of arsenic(III) ion was passed through the RES column at a space velocity of 15 h^?1. The arsenic(III) ion adsorbed was eluted by allowing 2 mol/dm³ sodium hydroxide solution containing 5% of sodium hydrogen sulfide to pass through the column. The recycle of adsorption and elution was found to be satisfactory. The RES also exhibited high adsorption ability for arsenic ion in the geothermal power waste solution.     

Synthesis and heavy metal ion adsorptivity of macroreticular chelating resins containing phosphono and carboxylic acid groups

Macroreticular copolymer beads were prepared by suspension polymerization of 4-vinylbenzyl chloride (VBC), divinylbenzene (DVB) and monomers with carboxylic ester groups like dibutyl maleate (DBM), dibutyl fumarate (DBF) and dibutyl itaconate (DBI) in the presence of toluene as diluent. The copolymer beads were phosphorylated at the chloromethylated phenyl rings with triethyl phosphite and hydrolyzed by an aqueous sodium hydroxide solution; the hydrolysis on the bead surface converted carboxylic ester/phosphonate groups into carboxylic acid/phosphono groups, respectively. The investigations on the metal ion chelation characteristics of the H-form copolymer beads revealed that they have good adsorptivity toward heavy metal ions like Pb²⁺, Cd²⁺ and Cu²⁺, and poor adsorptivity toward ions like Hg²⁺ and UO₂²⁺. The adsorptivity caused by the three carboxylic ester monomer derivatives was in the order DBM > DBI > DBF. Especially, the Na-form copolymer beads neutralized by alkali treatment were very available for the adsorption of all the metal ions under investigation.     

Effects of Acylation and Crosslinking on the Material Properties and Cadmium Ion Adsorption Capacity of Porous Chitosan Beads

Abstract

Chitosan is a novel glucosamine biopolymer derived from the shells of marine organisms. This biopolymer is very attractive for heavy metal ion separations from wastewater because it is selective for toxic transition metal ions over less toxic alkali or alkane earth metal ions. Highly porous, 3-mm chitosan beads were prepared by an aqueous phase-inversion technique for casting gel beads followed by freeze drying. In the attempt to simultaneously improve material properties and adsorption capacity, chitosan was chemically modified by 1) homogeneous acylation of amine groups with nonanoyl chloride before bead casting, and 2) heterogeneous crosslinking of linear chitosan chains with the bifunctional reagent glutaric dialdehyde (GA) after bead casting but before freeze drying. The random addition of C₈ hydrocarbon side chains to about 7% of the amine groups on uncrosslinked chitosan beads via N-acylation improved the saturation adsorption capacity from 169 to 216 mg Cd²⁺/g-bead at saturation (pH 6.5, 25°C) but only slightly reduced solubility in acid solution. Crosslinking of the N-acylated chitosan beads with 0.125 to 2.5 wt% GA in the crosslinking bath increased the internal surface area from 40 to 224 m²/g and rendered the beads insoluble in 1 M acetic acid (pH 2.36). However, crosslinking of the N-acylated chitosan beads reduced the saturation adsorption capacity to 136 mg Cd²⁺/g-bead at 0.75 wt% GA and 86 mg Cd²⁺/g-bead at 2.5 wt% GA. Crosslinking also significantly reduced the compression strength. There was no clear relationship between internal surface area and adsorption capacity, suggesting that the adsorbed cadmium was not uniformly loaded into the bead.     

Recovery of uranium from seawater V. Preparation and properties of the macroreticular chelating resins containing amidoxime and other functional groups

We have synthesized macroreticular chelating resins containing amidoxime groups from acrylonitrile (AN)-divinylbenzene (DVB)-alkyl acrylate, alkyl methacrylate, or vinylpyridine (VPy) copolymer beads. It was found that the chelating resin (RNMH)-containing amidoxime groups prepared from AN-DVB-methyl acrylate (MA) indicated the highest adsorption ability for uranium in seawater. Hydroxamic acid and carboxylic groups in addition to amidoxime groups were formed during the reaction of the copolymer beads with a methanol solution of hydroxylamine. The adsorption ability for uranium was greatly influenced by the physical pore structure (macropore) and the pore structure formed by the swelling(micropore). RNMH (RNMH10-10) prepared with 10 mol% of DVB and 10 mol% of MA had the highest adsorption ability and physical stability for uranium. On the other hand, improved adsorption ability for uranium was not observed in the case of the macroporous resins (RNPyH) prepared by the copolymerization of VPy as the basic component. After seawater was passed through the column packed with RNMH10-10 at a space velocity (SV) of 180 h^?1 (up-flow) for 10 days, the amount of uranium adsorbed on the resin was about 100 mg/dm³-R and 260 mg/kg-R.     

Unconventional ion exchange resins and their retention properties for Hg2+ ions

Synthesis of two unconventional ion exchange resins and their behaviour on the mercury sorption experiments were investigated.The ion exchange resins were obtained by the quaternization reaction of 4-vinylpyridine:divinylbenzene copolymer, gel-type, by two ways namely, the nucleophilic substitution of the pyridine matrix with 2-chloroacetamide and the nucleophilic addition of protonated copolymer to acrylamide.Comparative sorptions of Hg²⁺ ions on the synthesized pyridine resins by batch experiments in mono- and binary system were analyzed. Mercury retention experiments aimed to study the influence of the solution concentration, contact time and solution pH. The removal of Hg²⁺ ions from aqueous solutions depends on the pH values, the amount of the retained mercury increased with the pH value.The studied strong base pyridine anion exchange resins presented a good selectivity for the Hg²⁺ ions during the competitive sorption of Hg²⁺/Cu²⁺, Hg²⁺/Zn²⁺ and Hg²⁺/Fe³⁺ at metal cations ratio of 1:1.     

Preparation of aminoalkyl celluloses and their adsorption and desorption of heavy metal ions

Aminoalkyl celluloses (AmACs) were prepared from 6-chlorodeoxycellulose and aliphatic diamines H₂N(CH₂)_mNH₂ (m = 2, 4, 6, 8). Their adsorption and desorption of divalent heavy metal ions such as Cu²⁺, Mn²⁺, Co²⁺, Ni²⁺ and their mixtures were also investigated in detail. Adsorption of metal ions on AmACs was remarkably affected by the pH of the solution, the metal ion and its initial concentration, and also the number of methylene units in the diamines. No adsorption of metal ions occurred on AmACs in strongly acidic solutions. However, metal ions were adsorbed rapidly on AmACs from weakly acidic solutions and the amount of adsorption increased with increasing pH. The effectiveness of AmACs as adsorbents decreased with increasing length of the methylene moiety, and AmACs from ethylenediamine (m = 2) was most effective. The adsorption of metal ions on AmACs was in the order Cu²⁺ > Ni²⁺ > Co²⁺ > Mn²⁺. Accordingly, their behavior followed the Irving-Williams series and Cu²⁺ ions were preferentially adsorbed from solutions containing metal ion mixtures. The adsorbed ions were easily desorbed from the AmACs by stirring in 0.1 M HCl.     

Removal of metal ions from aqueous solution by activated carbons obtained from different raw materials

The adsorption of Pb²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ from aqueous solution at 293 K by activated carbons obtained from different raw materials was studied. These carbons were prepared by water vapour pyrolysis of the raw materials—apricot stones, coconut shells and lignite coal. The influence of the solution pH on the adsorption processes has been studied. The presence of other metal ions in the solution decreases the adsorption of each of the ions. The selective adsorption of the metal ions is observed but the ones preferentially adsorbed do not completely prevent the adsorption of other ions. The chemical nature of the carbon surface and metal ions have great significance for the adsorption process.     

Alanine containing porous beads for mercury removal from artificial solutions

N‐methacryloyl‐(L )‐alanine (MALA) was synthesized by using methacryloyl chloride and alanine as a metal‐complexing ligand or comonomer. Spherical beads with an average diameter of 150–200 μm were obtained by suspension polymerization of MALA and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(HEMA–MALA) beads were characterized by SEM, swelling studies, surface area measurement, and elemental analysis. Poly(HEMA–MALA) beads have a specific surface area of 68.5 m²/g. Poly(HEMA–MALA) beads with a swelling ratio of 63%, and containing 247 μmol MALA/g were used in the removal of Hg²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 60 min. The adsorption of Hg²⁺ ions onto PHEMA beads was negligible (0.3 mg/g). The MALA incorporation into the polymer structure significantly increased the mercury adsorption capacity (168 mg/g). Adsorption capacity of MALA containing beads increased significantly with pH. The adsorption of Hg²⁺ ions increased with increasing pH and reached a plateau value at around pH 5.0. Competitive heavy metal adsorption from aqueous solutions containing Cd²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ was also investigated. The adsorption capacities are 44.5 mg/g for Hg²⁺, 6.4 mg/g for Cd²⁺, 2.9 mg/g for Pb²⁺, and 2.0 mg/g for Cu²⁺ ions. These results may be considered as an indication of higher specificity of the poly(HEMA–MALA) beads for the Hg²⁺ comparing to other ions. Consecutive adsorption and elution operations showed the feasibility of repeated use for poly(HEMA–MALA) chelating beads. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1222–1228, 2006     

Removal of heavy‐metal ions from aqueous solution with nanochelating resins based on poly(styrene‐alt‐maleic anhydride)

Chelating resins have been considered to be suitable materials for the recovery of heavy metals in water treatments. A chelating resin based on modified poly(styrene‐alt‐maleic anhydride) with 2‐aminopyridine was synthesized. This modified resin was further reacted with 1,2‐diaminoethan or 1,3‐diaminopropane in the presence of ultrasonic irradiation for the preparation of a tridimensional chelating resin on the nanoscale for the recovery of heavy metals from aqueous solutions. The adsorption behavior of Fe²⁺, Cu²⁺, Zn²⁺, and Pb²⁺ ions were investigated by the synthesis of chelating resins at various pH's. The prepared resins showed a good tendency for removing the selected metal ions from aqueous solution, even at acidic pH. Also, the prepared resins were examined for the removal of metal ions from industrial wastewater and were shown to be very efficient at adsorption in the cases of Cu²⁺, Fe²⁺, and Pb²⁺. However; the adsorption of Zn²⁺ was lower than those of the others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis, and differential scanning calorimetry analysis. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013