Control release of some pesticides from starch/(ethylene glycol‐co‐methacrylic acid) copolymers prepared by γ‐irradiation

Starch/(Ethylene glycol‐co‐Methacrylic acid) [Starch/(EG‐co‐MAA)] hydrogels were designed for controlled delivery of pesticides, such as Fluometuron (FH); Thiophanate Methyl (TF) and Trifluralin (TI) which are use in the agricultural field. The delivery device was prepared by using γ‐irradiation and was characterized by FTIR, DSC, and SEM. The swelling behavior of hydrogels as a function of copolymer composition and irradiation dose was detected. This article discusses the swelling kinetics of polymer matrix and release dynamics of Trifluralin from hydrogels for the evaluation of the diffusion mechanism and diffusion coefficients. The values of the diffusion exponent ‘n’ for both the swelling of hydrogels and the release of Trifluralin from the hydrogels have been observed between 0.56 and 0.86 when the MAA content in the polymers was varied from 20 to 80 wt %, respectively. It is inferred from the values of the ‘n’ that non‐Fickian diffusion mechanism has occurred for different EG/MAA compositions. The release rate from matrices prepared under different conditions was studied to determine which factors have the most affect and control over the hydrogel matrix release property. The preparation conditions such as EG/MAA hydrogel composition, pesticide concentration, type of pesticide and irradiation dose greatly affect the pesticide release rate, which also influenced by the pH and temperature of the matrix‐surrounding medium. The pesticide release rate decreased as the irradiation dose and pH increased, but it increased as the MAA content, pesticide concentration and temperature increased. The release rate of Trifluralin is the highest one, whereas the Fluometuron is the lowest. The properties of the prepared hydrogels may make them acceptable for practical use as bioactive controlled release matrices. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Control release of some pesticides from Starch/(Ethylene glycol-co-Methacrylic acid) copolymers prepared by γ-irradiation

Starch/(Ethylene glycol-co-Methacrylic acid) [Starch/(EG-co-MAA)] hydrogels were designed for controlled delivery of pesticides, such as Fluometuron (FH); Thiophanate Methyl (TF) and Trifluralin (TI) which are use in the agricultural field. The delivery device was prepared by using γ-irradiation and was characterized by FTIR, DSC, and SEM. The swelling studies as a function of copolymer composition and irradiation dose were identified. This article discusses the swelling kinetics of polymer matrix and release dynamics of Trifluralin from hydrogels for the evaluation of the diffusion mechanism and diffusion coefficients. The values of the diffusion exponent ‘n’ for both the swelling of hydrogels and the release of Trifluralin from the hydrogels have been observed between 0.56 and 0.86 when the MAA content in the polymers was varied from 20 to 80 wt%, respectively. It is inferred from the values of the ‘n’ that non-Fickian diffusion mechanism has occurred for different EG/MAA compositions. The release rate from matrices prepared under different conditions was studied to determine which factors have the most affect and control over the hydrogel matrix release property. The preparation conditions such as EG/MAA hydrogel composition, pesticide concentration, type of pesticide and irradiation dose greatly affect the pesticide release rate which also influenced by the pH and temperature of the matrix-surrounding medium. The pesticide release rate decreased as the irradiation dose and pH increased, but it increased as the MAA content, pesticide concentration and temperature increased. The release rate of Trifluralin is the highest one while the Fluometuron is the lowest. The properties of the prepared hydrogels may make them acceptable for practical use as bioactive controlled release matrices.     

Synthesis of biodegradable thermo- and pH-responsive hydrogels for controlled drug release

Novel intelligent hydrogels composed of biodegradable and pH-sensitive poly(l-glutamic acid) (PGA) and temperature sensitive poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (PNH) were synthesized and characterized for controlled release of hydrophilic drug. The influence of pH on the equilibrium swelling ratios of the hydrogels was investigated. A higher PNH content resulted in lower equilibrium swelling ratios. Although temperature had little influence on the swelling behaviors of the hydrogels, the changes of optical transmittance of hydrogels as a function of temperature were marked, which showed that the PNH part of hydrogel exhibited hydrophobic property at temperature above the lower critical solution temperature (LCST). The biodegradation rate of the stimuli-sensitive hydrogels in the presence of enzyme was directly proportional to the PGA content. Lysozyme was chosen as a model drug and loaded into the hydrogels. The in vitro drug release experiment was carried out at different pH values and the release data suggested that both the pH and PNH content played important roles in the drug release behaviors of the hydrogels.     

Swelling behaviour and paracetamol release from poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-itaconic acid) hydrogels

Copolymer hydrogels of N-isopropylacrylamide and itaconic acid (IA), crosslinked with N,N′-methylenebisacrylamide, were prepared by radical copolymerization. These hydrogels were investigated with regard to their composition to find materials with satisfactory swelling and drug release properties. A paracetamol is used as a model drug to investigate drug release profile of the hydrogels. It was found that the investigated hydrogels exhibited pH- and temperature-dependent swelling behaviour with restricted swelling and lower equilibrium degree of swelling at lower pH values and temperatures above the LCST value of PNIPAM (around 34 °C). The diffusion exponent for paracetamol release indicate that the mechanism of paracetamol release are governed by Fickian diffusion, while in all release media initial diffusion coefficient was lower than late time diffusion coefficient. Furthermore, the paracetamol release rate depends on the hydrogel degree of swelling and it increased in the first stage of diffusion process, whereas was no significant difference thereafter. The presence of the IA moieties incorporated into the network weakened the shear resistance of the hydrogels. In order to calculate the pore size the characteristic ratio for PNIPAM, C _n  = 11.7, was calculated. Based on the pore size, the investigated hydrogels can be regarded as microporous. According to the obtained results swelling behaviour, mechanical properties, drug-loading capacity and the drug release rate could be controlled by hydrogel composition and crosslinking density, which is important for application of the investigated hydrogels as drug delivery systems.     

Swelling and drug‐release behavior of the poly(AA‐co‐N‐vinyl pyrrolidone)/chitosan interpenetrating polymer network hydrogels

A series of novel hydrogels were prepared from acrylic acid (AA), N‐vinyl pyrrolidone (NVP), and chitosan by photopolymerization. The swelling behavior, gel strength, and drug release behavior of the poly(AA/NVP) copolymeric hydrogels and corresponding interpenetrating polymer network hydrogels were investigated. Results showed that the swelling ratios for the present hydrogels decreased with an increase of NVP content in the gel, but the gel strength increased with an increase of NVP content in the gel. Results also showed that the drug‐release behavior for the gels is related to the ionicity of drug and the swelling ratio of the gel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2135–2142, 2004     

Swelling properties of copolymeric hydrogels prepared by gamma irradiation

Crosslinked xerogels in the form of rods have been prepared to > 99.9% conversion by the γ-ray initiated copolymerization in vacuo ob n-butyl acrylate (BA) with N-vinyl-2-pyrrolidone (VP) in the presence and absence of a crosslinking agent. Thin (about 0.5 mm) disks were swollen in water at 21°C, the final equilibrium swelling being the true water content only for copolymers of high BA content. At low-medium BA content, swelling was accompanied by the release of a small water-soluble fraction, leading to a slightly reduced apparent value for the water content. True water contents could be obtained more rapidly by prior Soxhlet extraction with boiling water. For xerogels containing > about 75% VP by weight, the resultant hydrogels had water contents > about 80%. The influences of dose, dose rate copolymer composition, and concentration of crosslinker on the water content, sol fraction, and extension ratio were investigated. A high level of reproducibility in properties of the hydrogels was obtained by numerous replicate experiments. The feasibility of scaling up the preparation to produce long (60 cm) xerogel rods of uniform properties has been demonstrated. For these copolymers, swelling in several common organic solvents generally exceeds that in water.     

Controlled release of aminophylline from poly (N‐isopropylacrylamide‐co‐itaconic acid) hydrogels

N‐Isopropylacrylamide (NIPA) has been copolymerized with itaconic acid (IA) in the presence of N,N‐methylenebisacrylamide (BIS) as crosslinker. The swelling capacity and the release rate of aminophylline at 37 °C are reported. Maximum equilibrium swelling increases as the itaconic acid content in the hydrogel increases. The experimental data suggest clearly that the swelling process obeys second‐order kinetics. According to this, the kinetic constant, k, and the maximum equilibrium swelling, W_∞, have been calculated. Drug release from fully swollen hydrogels follows Fick's law closely, but deviates from it for xerogels. © 2001 Society of Chemical Industry     

Synthesis and characterization of poly(N‐vinyl imidazole) hydrogels crosslinked by gamma irradiation

Crosslinked poly(N‐vinyl imidazole) (PVIm) hydrogels in the form of rods have been prepared by ⁶⁰Co γ‐radiation initiated simultaneous polymerization and crosslinking of N‐vinyl imidazole in bulk and water. In binary aqueous systems, the percentage gelation decreased with increasing water content. The PVIm hydrogels synthesized were further protonated in HCl solutions of different concentration. PVIm and protonated PVIm (H‐PVIm) hydrogels have been characterized using spectroscopic and thermal methods, and the swelling behaviour of these two types of hydrogel has been investigated. PVIm hydrogels originally swelled to 600% (by volume) but in their protonated form at pH 7.0 reached 4000% swelling. © 2002 Society of Chemical Industry     

Incorporation of acid polymethacrylates into temperature sensitive hydrogels using electron beam irradiation

In this work, electron beam irradiation was used to prepare hydrogels from aqueous solutions of monomers and/or linear polymers. Poly(N-isopropylacrylamide) (PNIPAAm) and polymers of methacrylic acid derivatives were used to generate the different temperature sensitive hydrogels. The effects of irradiation dose and N,N’-methylenebisacrylamide (BIS) crosslinking agent were also studied. The polymethacrylate content in co-polymeric hydrogels was varied (5, 10, 15 and 20 mol%). The temperature dependence of the swelling behavior of the hydrogels was characterized. The influence of polymethacrylate content on the swelling characteristics of the hydrogels was investigated. The incorporation of polymers from methacrylic acid derivatives into hydrogels was effectively achieved under optimum conditions.     

Water sorption behavior of CMC/PAM hydrogels prepared by γ-irradiation and release of potassium nitrate as agrochemical

Novel types of highly swelling CMC/PAM hydrogels have been prepared by grafting cross-linked polyacrylamide (PAM) chains onto carboxymethylcellulose (CMC) via a free radical polymerization method using γ-irradiation. The prepared CMC/PAM hydrogels were characterized by FT-IR spectral analysis. The AM content and irradiation dose had a direct effect on gel content of CMC/PAM hydrogels and inverse effect on their swelling ratio. The hydrogels showed enormous swelling in aqueous medium and displayed swelling characteristics which were highly dependent on the chemical composition of the hydrogel, pH and ionic strength of the medium in which the hydrogel was immersed. The results were supported by morphological properties of CMC/PAM hydrogels by using SEM. The kinetics of water uptake and the water transport mechanism were studied as a function of the CMC/AM ratio into the prepared hydrogel. The release rate of potassium nitrate entrapped within the CMC/PAM matrix increased by enhancing its loading %, and decreased with lowering AM content and irradiation dose.     

Synthesis and properties of hydrogels of poly(acrylic‐co‐acroloyl β‐cyclodextrin)

Novel acrylic monomers (β‐CD‐A and β‐CD‐6‐EA) containing β‐cyclodextrin (β‐CD) with different extent of substitution were prepared by using dicyclohexylcarbodiimide (DCC) as a condensation agent at room temperature. Two kinds of functional hydrogels were also synthesized by copolymerization of β‐CD‐A and β‐CD‐6‐EA with acrylic acid (AAc) using a redox initiator system in aqueous solution. The nuclear magnetic resonance (¹H NMR), infrared spectroscopy (IR), thermogravimetric analysis (TGA) were employed to character the molecular structures of β‐CD modified monomers and their copolymers. The swelling experiments indicate that the hydrogels with different equilibrium swelling ratio (ESR) possess obvious pH‐sensitivity and distinct dynamic swelling behavior. Using an anti‐cancer drug, chlorambucil (CHL), able to form complexes with β‐CD in water, as a model compound, the controlled drug release behaviors of these hydrogels were investigated. The release behavior of CHL from two kinds of hydrogels synthesized reveals that the release rate of CHL can be effectively controlled by pH values, cross‐linking density, and β‐CD content. In addition, it is found that the β‐CD with the proper frame and concentration can increase release efficiency of CHL from the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

pH‐ and temperature‐responsive IPN hydrogels based on soy protein and poly(N‐isopropylacrylamide‐co‐sodium acrylate)

pH‐ and temperature‐responsive interpenetrating polymer network (IPN) hydrogels based on soy protein and poly(N‐isopropylacrylamide‐co‐sodium acrylate) were successfully prepared. The structure and properties of the hydrogels were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analyzer. The equilibrium and dynamic swelling/deswelling behaviors and the drug release properties of the hydrogels responding to pH and/or temperature were also studied in detail. The hydrogels have the porous honeycomb structures, good miscibility and thermal stability, and good pH‐ and temperature‐responsivity. The volume phase transition temperature of the hydrogels is ca. 40°C. Changing the soy protein or crosslinker content could be used to control the swelling behavior and water retention, and the hydrogels have the fastest deswelling rate in pH 1.2 buffer solutions at 45°C. Bovine serum albumin release from the hydrogels has the good pH and temperature dependence. The results show that the proposed IPN hydrogels may have potential applications in the field of biomedical materials such as in drug delivery systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39781.     

Development of a poloxamer analogs/bioadhesive polymers‐based in situ gelling ophthalmic delivery system for tiopronin

The purpose of this study was to develop a poloxamer analogs/bioadhesive polymers‐based in situ gelling ophthalmic delivery system aiming at enhancing bioavailability and anticataract effect. The effect of poloxamer 407 (P407), poloxamer 188 (P188), carbopol 934P (C934), and sodium hyaluronate (NaHA) concentration on the gelation temperature (GT) was examined. The GT of P407 based in situ gel increased with an increase in the P188 concentration. NaHA and C934 lowered the GT of poloxamer analogs based in situ gel. Correlation analysis demonstrated that in vitro drug release from in situ gel was controlled by gel dissolution and followed zero‐order kinetics. Tiopronin in vitro transcorneal transit accorded with zero‐order kinetics. Twenty‐two percent P407 and 6% P188 containing 0.2% NaHA based formulation can be chosen as in situ gel matrix of tiopronin because of proper GT and sustained releasing ability. In vivo study showed that the area under the aqueous humor–concentration time curve of tiopronin increased by 1.6 folds for in situ gel, compared with tiopronin aqueous solution. High‐dose tiopronin in situ gel and solution delayed the development of selenite cataract 6 d and 4 d, respectively. The results showed that tiopronin in situ gel exhibits higher bioavailability and therapeutical effect. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Drug diffusion in neutral and ionic hydrogels assembled from acetylated galactoglucomannan

In this study, hydrogels based on acetylated galactoglucomannan (AcGGM)—a hemicellulose present in softwood—were synthesized and examined for their properties in drug‐release systems using two model substances of different molecular weight, size, and polarity (caffeine and vitasyn blue). Neutral hydrogels were produced from functionalized AcGGM using hydroxyethyl methacrylate (HEMA) coupled via carbonyldiimidazole (CDI) and a co‐monomer in a radical‐initiated polymerization. Through a second modification reaction between the HEMA‐modified AcGGM (M‐AcGGM‐methacrylated AcGGM) and maleic anhydride, a “double‐modified” AcGGM (CM‐AcGGM‐carboxylated M‐AcGGM) was successfully formed that could be cross‐linked to form ionic hydrogels by the very same polymerization method. The neutral hydrogels showed drug release kinetics that could be easily regulated by changing the relative amount of the methacrylated AcGGM and its corresponding degree of methacrylation. The drug release rate and the Fickian swelling decreased with an increase in these two aforementioned parameters. The ionic hydrogels showed quicker release kinetics and higher swelling capabilities than the corresponding nonionic gels did, especially at neutral conditions. Under acidic conditions, the release speed was lowered as expected because of protonation of carboxylic functionalities. Based on the findings we conclude that these novel hemicellulose‐containing hydrogels have future prospects in drug release formulations, e.g., in a later stage of development for application in oral drug administration technology. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of pH-sensitive hydrogel microparticles as a biological on–off switch

The pH-responsive swelling and release behaviors of anionic P(MAA-co-EGMA) hydrogel microparticles having various MAA and EG contents were investigated as a biological on–off switch for the design of an intelligent drug delivery system triggered by external pH changes. When DC was used as a dispersion stabilizer, well-dispersed hydrogel microparticles having an average diameter of approximately 4 μm were obtained. There was a drastic change of the equilibrium weight swelling ratio of P(MAA-co-EGMA) hydrogels at a pH of around 5, which is the pK _a of PMAA. When the MAA content in the hydrogel increased, the swelling ratio increased at a pH above 5 due to the more electrostatic repulsion between the charged groups of MAA. The P(MAA-co-EGMA) hydrogel microparticles showed a pH-responsive release behavior. At low pH (pH 4.0) small amounts of Rh-B were released while at high pH (pH 6.0) relatively large amounts of Rh-B were released from the hydrogels. The difference in the released amount of Rh-B from the hydrogels between pH 4.0 and 6.0 decreased when the MAA content in the hydrogels decreased, which means that the pH-responsive release behavior of the P(MAA-co-EGMA) hydrogel microparticles is closely related to the pH-responsive swelling property of the hydrogel.     

Preparation of poly(acrylic acid)–chitosan hydrogels by gamma irradiation and in vitro drug release

Biocompatible and biodegradable pH‐responsive hydrogels based on poly(acrylic acid) (AAc) and chitosan were prepared for controlled drug delivery. These interpolymeric hydrogels were synthesized by a gamma irradiation polymerization technique. The degree of gelation was over 96% and increased as the chitosan or acrylic acid content increased. The equilibrium swelling studies of hydrogels prepared in various conditions were carried out in an aqueous solution, and the pH sensitivity in the range of pH 1–12 was investigated. The AAc/chitosan hydrogels showed the highest water content when the 30 vol % AAc and 0.1 wt % chitosan were irradiated with a 30‐kGy radiation dose. Also, an increase of swelling degree with an increase in the pH was noticed and showed the highest value at pH 12. The drug, 5‐fluorouracil, was loaded into these hydrogels and the release studies were carried out in simulated gastric and intestinal fluids. The in vitro release profiles of the drugs showed that more than 90% of the loaded drugs were released in the first 1 h at the intestinal pH and the rest of the drug had been released slowly. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3660–3667, 2003     

Synthesis,characterization and,swelling behavior of semi‐IPN nanocomposite hydrogels of alginate with poly(N‐isopropylacrylamide) crosslinked by nanoclay

pH and temperature responsive nanocomposite hydrogels were synthesized with sodium alginate (NaAlg), N‐isopropylacrylamide (NIPA), and nanoclay. The structure, morphology, thermal behavior, and swelling and deswelling behaviors of the hydrogels were studied. The NaAlgm/PNIPA/Clayn hydrogels revealed a highly porous structure in which the pore sizes decreased and the amount of pores increased with increasing the nanoclay content in the hydrogels. PNIPA retained its own characteristics regardless of the amount of NaAlg and nanoclay. The effect of pH and nanoclay content on the swelling and effect of temperature on the deswelling behavior were investigated. The equilibrium swelling ratios of the nanocomposite hydrogels increased with increasing the pH from 2 to 6. The maximum swelling was attained at pH 6. Deswelling increased with increasing the nanoclay content in the hydrogels. The hydrogels were found to be pH and temperature responsive. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43222.     

Influence of MEOBiPA content on the properties of novel photoluminescent thermosensitive hydrogels

In order to establish a dual functional hydrogel, a special monomer, methacryloyloxy‐ethylene‐oxy‐carbonyl bis[4‐(phenyl‐isopropyl)phenyl]amine (MEOBiPA), was prepared from bis[4‐(phenyl‐isopropyl)phenyl]‐4‐cyanophenyl amine and 2‐hydroxyethyl methacrylate. Subsequently, a series of thermosensitive hydrogels was obtained through copolymerization of N‐isopropyl acrylamide (NIPAAm) with MEOBiPA by UV irradiation (named the NM series). The effect of MEOBiPA content on the swelling behavior, mechanical properties and drug release behavior of the hydrogels was further investigated. Results showed that the swelling ratios of the NM copolymeric hydrogels decreased from 4.73 to 1.74 g g^?1 when the MEOBiPA content in the hydrogel increased from 0.1 to 0.9 mol%. Both gel strength and crosslinking density of the NM hydrogels increased with increasing MEOBiPA. Conversely, the thermosensitive behavior of NM hydrogels significantly decreased upon increase of MEOBiPA content. Likewise, the caffeine release ratio also decreased from 70% to 25%. Notably, the intensity of photoluminescence increased with increasing MEOBiPA content in the hydrogels. Further, the corresponding copolymers of the hydrogels were prepared using free radical polymerization. The UV absorbance and photoluminescent behavior of the MEOBiPA, NIPAAm/MEOBiPA copolymeric hydrogels and their corresponding copolymers in different polar solvents were also investigated. © 2015 Society of Chemical Industry     

Kinetic degradation and controlled drug delivery system studies for sensitive hydrogels prepared by gamma irradiation

Ternary mixtures of N‐vinyl‐2‐pyrrolidone/itaconic acid and gelatin were irradiated by gamma rays at 30 kGy/s and at ambient temperature to prepared poly (NVP/IA and G) hydrogels. Poly (NVP/IA) hydrogels were prepared in different compositions (NVP/IA) mole ratio, (100/0), (98/1.5), (96.5/3.5), and (93/7.0) at 30 kGy. Then adding gelatin at different content (5, 10, 15, 20) mg to the best composition (NVP/IA/H₂O) (93/7)% for the characterization of network structure of these hydrogels, kinetic swelling drug release behavior and Scan Electron Microscope was studied. The equilibrium degree of swelling for P(NVP/IA) and P(NVP/IA/G) copolymer and the swelling‐degradation kinetics were also studies. According to dynamic swelling studies, both the diffusion exponent and the diffusion coefficient increase with increasing content of (IA), whereas, the addition of gelatin to (NVP/IA) composition by different content did not lead to any significant change in swelling percent. Also, the swelling behavior of copolymer hydrogels in response to pH value of the external media was studied, it is noted that the highest swelling values were at pH 4. The in vitro drug release behavior of these hydrogels was examined by quantification analysis with a UV/VIS spectrophotometers. Chlorpromazine hydrochloride was loaded into dried hydrogels to investigate the stimuli‐sensitive property at the specific pH and the drug release profile of these pH‐sensitive hydrogels in vitro. The release studies show that the highest value of release was at pH 4 which can be used for drug delivery system. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of novel poly(acrylamide‐co‐acrylic acid‐co‐2‐hydroxy ethyl actylate) hydrogels: Mathematical approach in investigation of swelling kinetics and diffusion models

In this study, a series of poly(acrylamide‐co‐acrylic acid‐co‐2‐hydroxy ethyl actylate) [AM‐co‐AA‐co‐HEA] hydrogels have been synthesized by varying the acrylic acid (AA)content over eightfold in feed in the range of 33.34–93.76% by keeping other monomer constant. These hydrogels were characterized by FTIR, SEM analysis, elemental analysis, residual acrylic acid analysis, network parameters, and dynamic swelling behavior. The swelling study showed that equilibrium swelling ratio was nonlinearly increased with increasing AA content. Interestingly, the equilibrium swelling ratio decreased from 53.42 to 48.52 for 75–80% AA content hydrogel. The swelling data were found to satisfactorily fit Fick's second law, demonstrating that diffusion rate of water uptake was primarily Fickian. From model fitting, it was observed that early model was applicable for first 30% water absorption, and late model was applicable for latter 70% water absorption for increasing AA content from 33.34–90.90%. For 93.76% AA, early‐time model was extended up to first 50% of water absorption and late model was contracted for latter 50% water absorption, indicating that excessive AA content affects the applicability range of early‐time and late‐time diffusion models for water absorption. Etters model was best applicable to all type of hydrogels and followed over all swelling range. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012