Nukleierung und Polymorphie in isotaktischem Polypropylen

Poly(amide acid)s have been synthesized by condensing benzidine-3,3′-dicarboxylic acid (BDC) with various aliphatic diesters EtOOC? R? COOEt with R = (CH₂)_n where n = 2, 4, 5, 6, 7, 8 and R = cis and trans ? CH=CH? , under suitable experimental conditions. These polymers are insoluble in all common organic solvents but are fairly soluble in concentrated sulfuric acid. The polymers were characterized by IR spectral study, viscometric measurements, and thermal analysis.     

Thermal decomposition kinetics of thermotropic liquid crystalline polyesterimides

We investigated the thermal decomposition behavior of three groups of polyesterimides that had been synthesized from different compositions of monomers that were added in different. We characterized these polymers with thermogravimetric analysis (TGA) and calculated the apparent activation energy (E_a) associated with the thermal decomposition process by the Ozawa method. The results showed that the E_a of the polyesterimides was correlated with the length of the methylene spacer and the content of the 4,4′‐dihydroxybenzophenone monomer. The polyesterimide with four methylene spacers in the main chain had a higher E_a than that with six methylene spacers. The polyesterimide with a higher 4,4′‐dihydroxybenzophenone content provided better thermal stability. The E_a of the polyesterimides also depended on the sequence in which the monomers were added during the copolycondensation process. The E_a of these polyesterimides followed the order: p‐hydroxybenzoic acid added first > p‐hydroxybenzoic acid mixed 4,4′‐dihydroxybenzophenone adding > 4,4′‐dihydroxybenzophenone added first. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2467–2472, 2005     

Synthesis and characterization of polyester-imides from imidodicarboxylic acid monomers and ethylene glycol

Two monoimidodicarboxylic acids and four diimidodicarboxylic acids were synthesized from trimellitic anhydride and amino compounds, viz., glycine, p-aminobenzoic acid, 4,4'-diaminodiphenyl sulfide, 4,4'-diaminodiphenyl ether, 4,4'-diaminodiphenyl methane, and 4,4'-diaminodiphenyl sulfide, and characterized by IR and ¹H-NMR spectroscopies and melting-point determination. These functional monomers were condensed in N-methyl-2-pyrrolidone solvent with ethylene glycol by a transesterification reaction to obtain the novel polyester-imides with backbones of alternate imide-ester linkages or imide-imide-ester-ester linkages with ? SO₂? , ? O? , ? CH₂? , or ? S? S? bridges in between. All the polymers were characterized by IR and ¹H-NMR spectroscopies, X-ray diffraction, solution viscosity, solubility and solubility parameters, and differential thermal analysis. Most of the polymers possess amorphous structure and fairly high decomposition temperatures (450–485°C). These polymers having solubility parameters in the range δ 11.44–11.85, as determined by the group contribution technique, are soluble at room temperatures in aprotic polar solvents. © 1993 John Wiley & Sons, Inc.     

How the monomer concentration of polymerization influences various properties of polybenzimidazole: A case study with poly(4,4′‐diphenylether‐5,5′‐bibenzimidazole)

In this work, a series of poly(4,4′‐diphenylether‐5,5′‐bibenzimidazole)s (OPBIs) were synthesized from 4,4′‐oxybis(benzoic acid) and 3,3′,4,4′‐tetraaminobiphenyl through the variation of the initial monomer concentration with a solution polycondensation technique in a poly(phosphoric acid) medium. The resulting polymers were characterized by various techniques such as infrared (IR), nuclear magnetic resonance, dynamic mechanical analysis (DMA), and thermogravimetric analysis. The initial monomer concentration in the polymerization mixture played an important role in controlling the molecular weight of the resulting polymers. A temperature‐dependent IR study showed that the free movement of the ? NH group of the imidazole ring was blocked by the absorbed moisture. The DMA study showed that the glass‐transition temperature (T_g) varied with the molecular weight, and the presence of the ether linkage in the OPBI polymer backbone had a significant influence on T_g. A high‐molecular‐weight OPBI polymer tended to form a supramolecular organization, which influenced the thermal characteristic of the polymer. Photophysical studies demonstrated the fluorescent characteristics of the OPBI polymers in both solid and solution states. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of polyamides containing para-linked dimethylbiphenylene moieties

A series of wholly aromatic polyamides containing 3,3′-dimethylbiphenyl-4,4′-dicarboxylic acid (P-DMBA) and 3,4′-dimethylbiphenyl-4,3′-dicarboxylic acid (Q-DMBA) was prepared by the direct polycondensation method using triphenylphosphite and pyridine. Most of the polymers are readily soluble in polar aprotic solvents such as N-methyl-2-pyrrolidone (NMP), N,N′-dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), pyridine (py), and m-cresol and could be cast into tough and flexible films. The solubilities of copolyamides containing P-DMBA and Q-DMBA as acid components were remarkably improved. These were characterized by inherent viscosity, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical spectrometry (DMS) measurements. The glass transition temperatures of these polymers were in the range of 200–300°C and the 5% weight loss temperatures were 430–470°C. Films prepared by casting from polymer solutions exhibited good tensile properties. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68:847–853, 1998     

Synthesis and characterization of aromatic/cycloaliphatic poly(amide‐ imide‐imide)s from bis(4‐amino‐ 3,5‐dimethylphenyl) cycloalkane derivatives

A series of novel aromatic diamines containing cycloaliphatic moieties was synthesized by the reaction of cycloalkanones like cyclohexanone and cycloheptanone with 2,6‐dimethylaniline. The tetrimide diacid was synthesized using the prepared diamine with 3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride/pyromellitic dianhydride and p‐aminobenzoic acid. The polymers were prepared by treating the tetrimide diacid with different aromatic diamines. The structures of the monomers and polymers were identified using elemental analysis and Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy. The polymers show excellent solubility. The polymers are amorphous and have high optical transparency. They also show good thermal stability and their T_g value is found to be in the range 268–305 °C. Copyright © 2007 Society of Chemical Industry     

Molecularly imprinted polymer for solid phase extraction of nicotinamide in pork liver samples

Aromatic polyamides and polythioamides with pendent chlorobenzylidine rings were synthesized through direct polycondenzation of 2‐(p‐chlorobenzalimino) terephthalic acid with the diamines 4,4′‐oxidianiline (1a), 4,4′‐methylenediamide (1b), 4,4′‐diaminodiphenyl sulfone (1c), and thioamines 4,4′‐(bisthiourea) diphenyl ether (3a), 4,4′‐(bisthiourea) diphenyl methane (3b), 4,4′‐(bisthiourea) diphenyl sulfone (3c), respectively, in DMF using P(OPh)₃/pyridine. The polymers were precipitated using water as nonsolvent. FTIR and ¹H‐NMR spectroscopic analysis was used to characterize the monomers and polymers. Representative polyamides and polythioamides were used for the removal of heavy metal ions such as Pb(II), Cd(II), Cu(II), and Cr(III) from aqueous solutions. The effects of pH, contact time, and initial concentration on the uptake of metal ions have been investigated. The adsorption capacities under competitive conditions were in the order Pb (II) > Cu (II) > Cr (III) > Cd (II). The adsorbed ions were eluted by treatment with 2N HCl, and the activities of the polymers are retained after fourth regeneration. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of new polyamides containing p‐phenylenediacryloyl moieties in the main chain

Six new polyamides 8a–f containing p‐phenylenediacryloyl moieties in the main chain were prepared by the direct polycondensation reaction of bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 with 1,4‐diphenylene diamine 7a , 1,3‐diamino toluene 7b , 1,5‐diamino naphthalene 7c , 4,4′‐diamino diphenyl ether 7d , 4,4′‐diamino diphenyl sulfone 7e , and 3,3′‐diamino diphenylsulfone 7f by using thionyl chloride, N‐methyl‐2‐pyrolidone, and pyridine as condensing agents. These new polymers 8a–f were obtained in high yield and inherent viscosity between 0.35–0.65 dL/g. The resulting polyamides were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, FTIR and UV–vis spectroscopy. Diacid acid 6 as a new monomer containing p‐phenylenediacryloyl moiety was synthesized by using a three‐step reaction. First, p‐phenylenediacrylic acid 3 was prepared by reaction of terephthal aldehyde 1 with malonic acid 2 in the presence of pyridine, then diacid 3 was converted to p‐phenylenediacryloyl chloride 4 by reaction with thionyl chloride. Finally, bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 was prepared by the condensation reaction of phenylenediacryloyl chloride 4 with p‐aminobenzoic acid 5 . © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, optical and electrical properties of thermally stable polyazomethines derived from 4,4′-oxydianiline

Three soluble, thermally stable azomethine polymers were synthesized by the oxidative polycondensation of azomethine bisphenols using NaOCl as an oxidant in aqueous alkaline medium. The azomethine bisphenol monomers, 4,4′-oxybis[N-(2-hydroxy-3-methoxybenzilidine)aniline], 4,4′-oxybis[N-(2-hydroxy-5-bromobenzilidine)aniline] and 4,4′-oxybis[N-(2-hydroxynaphthalidine) aniline] were synthesized by the condensation of 4,4′-oxydianiline with three aromatic aldehydes. The structures of the monomers and polymers were confirmed by Fourier Transform infrared spectroscopy, UV–visible, ¹H-NMR and ¹³C-NMR spectroscopic techniques. Morphology of the synthesized polymers was characterized using scanning electron microscope. The thermal stability of the polymers is evidenced by high carbines residue obtained in TGA. Fluorescence spectra showed that the emission maxima centred in the region 420–460 nm for all the compounds with large stokes shift values (?λ_ST). Electrical conductivity of iodine-doped polymers was measured by four-point probe technique. The synthesized polymers have shown good electrical conductivity on iodine doping, and it increases with the increase in iodine vapour contact time. The self-extinguishing property of the synthesized polymers was studied by the calculation of the limiting oxygen index values with van Krevelen’s equation.     

Synthesis and characterization of novel aromatic polyamides derived from 2,2′‐bis(p‐phenoxyphenyl)‐4, 4′‐diaminodiphenyl ether

BACKGROUND: Wholly aromatic polyamides (aramids) are high‐performance polymeric materials with outstanding heat resistance and excellent chemical stabilities due to chain stiffness and intermolecular hydrogen bonding of amide groups. Synthesis of structurally well‐designed monomers is an effective strategy to prepare modified forms of these aramids to overcome lack of organo‐solubility and processability limitations. RESULTS: A novel class of wholly aromatic polyamides was prepared from a new diamine, namely 2,2′‐bis(p‐phenoxyphenyl)‐4,4′‐diaminodiphenyl ether (PPAPE), and two simple aromatic dicarboxylic acids. Two reference polyamides were also prepared by reacting 4,4′‐diaminodiphenyl ether with the same comonomers under similar conditions. M?_w and M?_n of the resultant polymers were 8.0 × 10⁴ and 5.5 × 10⁴ g mol^?1, respectively. Polymers resulting from PPAPE exhibited a nearly amorphous nature. These polyamides exhibited excellent organo‐solubility in a variety of polar solvents and possessed glass transition temperatures up to 200 °C. The 10% weight loss temperatures of these polymers were found to be up to 500 °C under a nitrogen atmosphere. The polymers obtained from PPAPE could be cast into transparent and flexible films from N,N‐dimethylacetamide solution. CONCLUSION: The results obtained show that the new PPAPE diamine can be considered as a good monomer to enhance the processability of its resultant aromatic polyamides while maintaining their high thermal stability. The observed characteristics of the polyamides obtained make them promising high‐performance polymeric materials. Copyright © 2009 Society of Chemical Industry     

Preparation and characterization of metal‐containing aromatic polyimides

A series of novel metal‐containing aromatic polyimides were synthesized from divalent metal oxide/hydroxide (MO/M(OH)₂) (M = Ba, Sr, Ca, Mg, Zn, Cd, Co, Ni, Pb, Cu), p‐aniline sulfonic acid (ASA), and 3,3′‐4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). The C, H, N, and S contents were determined by elemental analysis, their structures were characterized by proton nuclear magnetic resonance (¹H‐NMR) and Fourier transform infrared (FT‐IR) spectroscopy, and the thermal properties of the polymers were also studied by TG–DTA. It is found that metal‐containing polyimides have a higher thermal stability. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2363–2369, 2000     

Film studies of certain new aromatic–aliphatic polyamides

Two new aromatic–aliphatic polyamides containing azo linkage in the main chain based on 2,2′‐dimethyl‐4,4′‐diaminoazobenzene and adipic/2‐chloro‐5‐methyl‐1,2‐dioic acid (α‐chloro‐δ‐methyl adipic acid) were synthesized and analyzed by thermogravimetry and films were cast. Also three polymers obtained from condensation of 4,4′‐azodibenzoic acid/adipic acid and 2,2′‐bis [4‐(p‐amino phenoxy) phenyl] propane/4,4′‐diaminoazobenzene were studied in terms of mechanical and morphological properties. Film studies were carried out interms of tensile property, scanning electron microscope, dielectric, microwave, and X‐ray diffraction pattern. Thermal studies have been done using thermogravimetric analysis, differential thermal analysis, and pyrolysis‐mass spectral data. The results were correlated with structure and orientation of the molecules. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1305–1316, 2004     

Synthesis and characterization of polyazomethine conducting polymers and oligomers

Conjugated polyazomethine polymers were prepared from the polycondensation of terephthalaldehyde with 4,4′-thiodianiline, and 4,4-thiodibenzaldehyde with 4,4′-thiodianiline, 4,4′-phenylenediamine and benzidine. The polymers showed good stability in air and were soluble in many organic solvents. The electrical conductivities of the undoped and doped (H₂SO₄ and I₂) polymers were studied. Doping the polymers markedly increased their conductivities from 10^?8 ? 10^?11 S cm^?1 (dielectric region) to 10^?3 ? 10^?5 S cm^?1 (semiconducting region). The polymers were characterized by IR spectroscopy, elemental analyses, viscosity measurements and X-ray diffraction. Furthermore, polyazomethine oligomers were prepared and a comparative study of the physical properties of the oligomers and their corresponding polymers was performed. The electrical behavior of the oligomers was studied. It was found that oligomers with a minimum of eight aromatic (Ar) rings gave almost the same electrical conductivities as long-chain polymers.     

Synthesis and characterization of novel copolymers of poly(ether ketone ketone) and poly(ether ketone sulfone imide)

A new monomer containing sulfone and imide linkages, bis{4-[4-(p-phenoxyphenylsulfonylphenoxy)benzoyl]-1,2-benzenedioyl}-N,N,N′,N′-4,4′-diaminodiphenyl ether (BPSPBDADPE), was prepared by the Friedel–Crafts reaction of bis(4-chloroformyl-1,2-benzenedioyl)-N,N,N′,N′-4,4′-diaminodiphenyl ether with 4,4′-diphenoxydiphenyl sulfone. Novel copolymers of poly(ether ketone ketone) and poly(ether ketone sulfone imide) were synthesized by electrophilic Friedel–Crafts solution copolycondensation of terephthaloyl chloride with a mixture of DPE and BPSPBDADPE. The polymers were characterized by different physico-chemical techniques. The polymers with 10–25?mol% BPSPBDADPE are semicrystalline and had increased T _gs over commercially available PEEK and PEKK (70/30) due to the incorporation of sulfone and imide linkages in the main chains. The polymer IV with 25?mol% BPSPBDADPE had not only high T _g of 194?°C but also moderate T _m of 338?°C, having good potential for melt processing and exhibited high thermal stability and good resistance to common organic solvents.     

Thermal properties,adhesive strength,and optical transparency of cyclolinear poly(aryloxycyclotriphosphazenes)

Four cyclolinear poly(aryloxycyclotriphosphazenes) derived from poly[4,4′‐(isopropoylidene)diphenoxytetrachlorocyclotriphosphazene] and poly[4,4′‐(hexafluoroisopropylidene)diphenoxytetrachlorocyclotriphosphazene] were synthesized from the reaction of hexachlorocyclotriphosphazene (HCP) with 4,4′‐(isopropylidene)diphenol (bisphenol A) or 4,4′‐(hexafluoroisopropylidene)diphenol (bisphenol AF) in molar ratio 1 : 1 via a one‐step condensation polymerization. Subsequent reaction of the resulted chlorine‐bound polymers with adequate amount of the sodium salts of 4‐methoxycarbonylphenoxide or 4‐propoxycarbonylphenoxide yielded the corresponding chlorine‐free polymers, [poly(tetra‐4‐methoxycarbonylphenoxy)‐4,4′‐(isopropoylidene)diphenoxy cyclotriphosphazene] (MBACP), [poly(tetra‐4‐propoxycarbonylphenoxy)‐4,4′‐(isopropoylidene)diphenoxycyclotriphosphazene] (PBACP), [poly(tetra‐4‐methoxycarbonylphenoxy)‐4,4′‐(hexafluoroisopropylidene)diphenoxycyclotriphosphazene] (MBAFCP), [poly(tetra‐4‐propoxycarbonylphenoxy)‐4,4′‐(hexafluoroisopropylidene)diphenoxycyclotriphosphazene] (PBAFCP), respectively. The chemical structures were characterized by Fourier transformer infrared, ¹H, and ¹³C‐NMR. Thermal properties of polymers were investigated using DSC and TGA analysis. The obtained polymers were thermoplastic, having moderate T_g values in the range of 26–78°C and good thermal stability up to 350°C in N₂ and O₂ gases. The thermal decomposition of the isopropylidene‐containing polymers is a one‐step process, while that of hexafluoroisopropylidene‐containing polymers is a two‐step process. However, presence of the latter group in the polymers backbone showed negligible effects on the thermo‐oxidative stability. The adhesive strength was measured by lap‐shear strength test on glass–glass bonded joint and found to be in the range of 1.78–2.62 MPa, this property may be attributed to the physical interactions between glass–glass interfaces and the polar‐pendant units present at the polymers backbone. The products showed high optical transparency when they applied between two glass surfaces, the adhesive layers were colorless, with the UV cut‐off wavelength of 300–302 nm, and the maximum transparency of about 90% was observed within the wavelengths range of 400–700 nm. Because of their properties, the cyclolinear poly(aryloxycyclotriphosphazenes) synthesized in this study are recommended as potential candidates for high thermally stable, transparent adhesives required in industrial applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synthesis and characterization of poly(ether sulfone) and poly(ether sulfone ketone) copolymers

Poly(ether sulfone) and poly(ether sulfone ketone) copolymers (I–V) were synthesized by the nucleophilic substitution reaction of 4,4′-dihydroxy diphenyl sulfone (DHDPS, A) with various mole proportions 4,4′-difluoro benzophenone (DFBP, B) and 4,4′-difluoro diphenyl sulfone (DFDPS, C) using sulfolane as solvent in the presence of anhydrous K₂CO₃. The polymers were characterized by physicochemical and spectroscopic techniques. All polymers were found to be amorphous, and the glass transition temperature (T_g) was found to increase with the sulfonyl content of the polymers. ¹³C-nuclear magnetic resonance (NMR) spectral data was interpreted in terms of the compositional triads, BAB, BAC, CAC, ABA, and ABB, and indicate that transetherification occurs at high concentration of DFBP units in the polymer (IV). The good agreement between the observed and calculated feed ratios validates the triad analysis. Thermal decomposition studies reveal that the thermal stability of the polymers increases with increase in the carbonyl content in the polymer. Activation energies for thermal decomposition were found to be in the range of 160–203 kJ mol⁻¹ with the cleavage of ϕ SO₂ bond being the preponderant mode of decomposition and depended on the block length of the sulfonyl unit. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2113–2121, 1999     

Preparation of poly(amic acid) and polyimide derived from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride with different diamines by microwave irradiation

Polycondensation‐type poly(amic acid) (PAA) was synthesized with 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride as a dianhydride monomer and 4,4′‐diaminodiphenylmethane and 4,4′‐oxydianiline as diamine monomers under microwave irradiation in dimethylformamide. Then, PAA was used to make polyimide (PI) by imidization at a low temperature. The structure and performance of the polymers were characterized with Fourier transform infrared (FTIR), proton nuclear magnetic resonance (¹H‐NMR), viscosity, X‐ray diffraction (XRD), and thermogravimetry (TG) curve analyses. The FTIR spectra of the polymers showed characteristic peaks of PI around 1779 and 1717 cm^?1. The ¹H‐NMR spectrum of PAA indicated a singlet at 6.55 ppm assigned to ? NHCO? and a singlet at 10.27 ppm assigned to carboxylic acid protons. The XRD spectrum demonstrated that the obtained PI had a low‐order aggregation structure with a d‐spacing of 0.5453 nm. The TG results revealed that the PI was thermally stable with 10% weight loss at 565°C in an N₂ atmosphere. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Construction of Two One-Dimensional Coordination Polymers by 5-Chlorosalicylic Acid Plus N-Donor Ligand: Synthesis,Structure and Catalytic Properties

Two novel coordination polymers, namely, [Co(HL5)(4,4′-bpy)_1.5(H₂O)₂]_n·n(HL5) (1) and [Zn(HL5)₂(4,4′-bpy)]_n (2) (H₂L5 = 5-chlorosalicylic acid), have been hydrothermally synthesized through the reaction of 5-chlorosalicylic acid with divalent transition-metal salts in the presence of N-donor ancillary coligand (4,4′-bpy = 4,4′-bipyridine). Polymer 1 exhibits one-dimensional (1D) infinite ladderlike chain, which is extended into a 2D supramolecular network via O–H···O hydrogen-bonding interactions. In polymer 2, 4,4′-bpy acts as a bidentate ligand to bind Zn(II) ions to form a [Zn(4,4′-bpy)]_n infinite zigzag chain structure, which is linked by hydrogen bonds into a 3D suparmolecular assembly. Also, IR spectra, powder X-ray diffraction, fluorescence Properties and thermal decomposition process of polymers were investigated. Moreover, both compounds exhibit catalytic properties on degradation of methyl orange in Fenton-like process.     

A novel three-dimensional cadmium(II) coordination polymer constructed from dinuclear molecular building block,syntheses, structure and photoluminescence property

A novel cadmium(II) coordination polymer, [Cd₂(pzdc)₂(4,4′-bpy)₂]·4H₂O (1) (H₂pzdc = pyrazine-2,3-dicarboxylic acid; 4,4′-bpy = 4,4′-bipyridine), has been synthesized by hydrothermal reaction of Cd(OAC)₂, H₂pzdc and 4,4′-bpy. Single-crystal X-ray diffraction analysis reveals that 1 constructed from dinuclear building blocks has a three-dimensional (3-D) structure with rob topology. Fluorescent measurement of 1 exhibits strong blue-green emission in the solid state at room temperature, and its framework possess remarkable thermal stability.     

Resistive switching characteristics of polyimides derived from 2,2′‐aryl substituents tetracarboxylic dianhydrides

2,2′‐Position aryl‐substituted tetracarboxylic dianhydrides including 2,2′‐bis(biphenyl)‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride and 2,2′‐bis[4‐(naphthalen‐1‐yl)phenyl)]‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride were synthesized. A new series of aromatic polyimides (PIs) were synthesized via a two‐step procedure from 3,3′,4,4′‐biphenyl tetracarboxylic dianhydride and the newly synthesized tetracarboxylic dianhydrides monomers reacting with 2,2′‐bis[4′‐(3″,4″,5″‐trifluorophenyl)phenyl]‐4,4′‐biphenyl diamine. The resulting polymers exhibited excellent organosolubility and thermal properties associated with T_g at 264 °C and high initial thermal decomposition temperatures (T_5%) exceeding 500 °C in argon. Moreover, the fabricated sandwich structured memory devices of Al/PI‐a/ITO was determined to present a flash‐type memory behaviour, while Al/PI‐b/ITO and Al/PI‐c/ITO exhibited write‐once read‐many‐times memory capability with different threshold voltages. In addition, Al/polymer/ITO devices showed high stability under a constant stress or continuous read pulse voltage of ? 1.0 V. Copyright © 2011 Society of Chemical Industry