共查询到20条相似文献,搜索用时 296 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
为进一步深化高职院校校企合作、助力产教融合,对高职院校企业教师工作站建设与运行机制展开研究。对企业教师工作站进行顶层设计,细化教师企业工作站运行任务分配,依托云平台进行运行与管理,与企业共同合作确立工作站总体运行机制,实现新产品研发、技术应用等多方位合作模式,搭建“双师型”人才队伍建设的桥梁,有效提升高职院校教师的实践能力和教学效率以及社会服务能力,同时优化教学质量对校企深度合作、校企协同育人具有重要意义。 相似文献
11.
12.
13.
Dinesh Singh J. K. Gehlawat Musti S. Rao 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1990,47(2):127-136
Oslefins and diolefins are important intermediates in the petrochemical industry and the future promises a further substantial increase in demand. While several catalysts have been formulated in the past for the abstraction of hydrogen from butenes and propylene, these catalysts are inefficient in the abstraction of first hydrogen from butane. Bismuth molybdates (β and γ-phases) containing iron oxide and supported on alumina are used as catalysts in the present investigation on the oxidative dehydrogenation of n-butane. Effects of catalyst content, temperature and oxygen: n-butane ratio on conversion and selectivity to butadiene and (C4H8 + C4H6) are studied in the following ranges of experimental conditions: β-bismuth molybdate/100 mol support I(K), 3–9; γ-bismuth molybdate/100 mol support I(K), 5-20; temperature, 400–500°C; O2: butane ratio, 0.6:1.7. 相似文献
14.
研究了温度和pH值对漆酶酶活以及漆酶处理纤维压制纤维板性能的影响。结果表明,pH较低、温度较高时漆酶酶活较高,压制的纤维板强度性能较好。但温度太高(60~80℃),延长加热时间,漆酶稳定性变差,酶活明显降低,压制纤维板的强度下降。 相似文献
15.
A viscometer used to measure the viscosity of 10 μl of a liquid, must be miniaturized down, and the liquid velocity gradient in the channel used to determine the viscosity coefficient. Two major factors that affect the liquid velocity are the mechanical forces exerted by the mechanical motors and electromagnetic forces. In this study, electrowetting on dielectric (EWOD) is adopted to drive liquids. Variously sized electrodes on a chip, and two shapes of channel are employed to measure the velocity gradient to determine the viscosity coefficient. The device is fabricated by microelectromechanical system (MEMS) technology. The dielectric layer used in EWOD has a high dielectric constant, BST (Ba0.7Sr0.3TiO3), to reduce the required applied voltage; its surface is coated with hydrophobic polymer, polytetrafluoro-ethylene (PTFE, Teflon® AF DuPont). Experimental results demonstrate that liquids can be pulled at 660 μm/s in linear channels by applying a voltage of 15 V. 相似文献
16.
17.
采用实验方法考察工艺参数对沉降斑的影响。基于一个带凸台的平板模具,采用L27(313)正交矩阵进行实验,研究了几何尺寸、熔体温度、注射时间、保压压力及保压时间对厚度突变处沉降斑形成的影响,同时还考虑了熔体温度和注射时间以及保压压力和注射时间之间的交互作用影响;通过性噪比分析和F检验优化成型工艺条件并对工艺参数的影响进行显著性分析。结果表明,对于厚度突变的平板制品,厚度突变的程度对其沉降斑形成的影响最大,其次为熔体温度,保压压力,保压时间等;采取减小厚度变化,降低熔体温度或增加保压压力和保压时间等措施,可以减小厚度突变处沉降斑,从而减少其对外观质量的影响;因素之间的交互作用对制品沉降斑的形成有一定的影响,熔体温度B和注射时间C之间的交互作用影响较为明显,而保压压力D和注射时间C之间的交互作用对该质量指标的影响最小,可以并入误差。 相似文献
18.
探讨了株化集团在企业管理及改革等方面的经验。该公司为适应市场经济的变革制订了科学的发展规划、思路和目标;确定了目标管理实施方案和各项制度;强化销售工作和质量管理,加大科技投入,加强科技创新活动;理顺各种关系,做好各项有关工作,使企业的经济效益和对社会的贡献逐年增大。 相似文献
19.
基于四氢呋喃聚醚聚氨酯弹性体力学性能的研究 总被引:7,自引:2,他引:5
以四氢呋喃聚醚(PTMG)、二异氰酸酯(TDI、或MDI)和扩链剂(MOCA、或BDO)为原料,制备了浇注型和热塑型聚氨酯弹性体。研究了预聚体的NCO基质量份、PTMG的分子量和硬段质量份数对PU弹性体力学性能的影响。结果表明:PU弹性体的硬度和模量随NCO含量和硬段质量份数增加而增加。逐渐提高PTMG的分子量,PU弹性 的拉伸强度降低,而拉断伸长率增加。2000分子量的PTMG-PU弹性体的冲击弹性比1000分子量的PTMG-PU好。 相似文献