共查询到17条相似文献,搜索用时 125 毫秒
1.
双酚F的合成及其应用研究综述 总被引:3,自引:1,他引:3
本文介绍了目前国内外双酚F生产的技术路线,以及双酚F在环氧树脂、PC树脂、酚醛树脂、聚酯树脂等合成材料中的应用,并重点对双酚F型和双酚A型环氧树脂的性能进行了比较。 相似文献
2.
双酚F/间苯二酚共聚型环氧树脂 总被引:5,自引:1,他引:5
采用间苯二酚、双酚F与环氧氯丙烷共聚合成一种高性能的环氧树脂,研究了不同反应温度、反应时间、双酚F/间苯二酚比例等条件对共聚环氧树脂结构材料性能的影响,确定了合成条件。结果表明所制备的双酚F/间苯二酚共聚型环氧树脂粘度比单纯双酚F环氧树脂低,其热固化结构材料的韧性、耐热性和拉伸强度较纯双酚F和间苯二酚型环氧树脂有明显提高。其最佳合成条件为:醚化温度为80℃,醚化时间5h,加碱闭环温度为60℃,加碱速度为4g/10min。间苯二酚与双酚F质量为20∶80时共聚树脂的综合性能最佳。其粘度为2 1Pa·s,比单纯的双酚F环氧树脂下降了42%;玻璃化温度为165℃,比纯双酚F环氧树脂提高了20℃;拉伸强度为102 3MPa,比纯双酚F环氧树脂提高了27%;弯曲强度为113 6MPa,比单纯的双酚F环氧树脂下降了18%。 相似文献
3.
4.
5.
6.
7.
介绍了我国环氧树脂的生产消费概况,分析了溴化环氧树脂、邻甲酚醛环氧树脂、双酚F环氧树脂、酚醛环氧树脂和双酚A酚醛环氧树脂等特种环氧树脂的生产和研究进展,提出了我国发展环氧树脂的见解. 相似文献
8.
以双酚F环氧树脂和丙烯酸为原料,经过聚合反应得到双酚F环氧丙烯酸酯预聚物,然后按照70%︰26%︰4%的比例与稀释剂TPGDA和光引发剂BDK配制成双酚F型光敏树脂,将光敏树脂的收缩率和凝胶含量作为指标考察影响树脂性能的合成工艺。经正交实验得到的最佳合成条件为:四甲基氯化铵为催化剂,用量为原料总质量的1.0%;对苯二酚为阻聚剂,用量为原料总质量的0.1%;反应温度为100℃;m(环氧树脂) ︰m(丙烯酸)=1︰0.8;反应时间4h。结果表明:利用最佳条件下得到的双酚F型光敏树脂收缩率为5.05%,凝胶含量为92.25%,相比于双酚A型环氧树脂收缩率降低30%,凝胶含量增加3%,对紫外光的灵敏性和吸收能力都相对增加,可以用于3D打印。 相似文献
9.
<正>日本大都化成是东都化成集团所属的株式会社,位于神户,建于1972年,开始生产液体环氧树脂和固化剂,以后逐步发展到能生产双酚A型液体和固体环氧树脂(YD系列和YP系列)、四溴双酚A环氧树脂YDB系列、双酚F型环氧树脂(YDF系列)等品种. (1)液体环氧树脂有YD—128、YD—115、YD128CA、YD—127、YD—134等品种,1972年4月投产,目前生产能力为 相似文献
10.
11.
An approach to chemical recycling of amine cured epoxy resin using nitric acid solution has been proposed [Dang W, Kubouchi M, Yamamoto S, Sembokuya H, Tsuda K. Polymer 2002;43:2953-8. [1]]. 1,8-p-Menthanediamine cured bisphenol F type (BPF/MDA) epoxy resin was decomposed in nitric acid solution, and then the decomposed product was repolymerized with original resin. In this paper, applicability of the proposed approach to glass fiber reinforced bisphenol F type epoxy resin cured with diamino diphenyl methane (DDM) was investigated. It was concluded that the approach was applicable to BPF/DDM epoxy resin, and potentially to all of amine cured epoxy resin. Flexural strength of the recycled resin was higher than that of virgin resin until the content of the neutralized extract, which was available from degradation of BPF/DDM epoxy resin, was not more than 30 wt% of the original resin. The reinforcement of glass fiber could be separated and recovered. The existence of the reinforcement did not affect decomposition the matrix. 相似文献
12.
13.
We investigated improvement of workability (viscosity), storage stability, and curing ability of thiirane resin for adhesive applications. The viscosity of bisphenol‐F thiirane resin was lower than that of bisphenol‐A thiirane resin, especially at low temperatures, thus improving ease of handling. Addition of diphenyl decyl phosphite improved its storage stability to a level similar to that of bisphenol‐A epoxy resin. The curing of bisphenol‐F thiirane resin increased three times faster by adding 2,4,6‐tris(dimethylaminomethyl)phenol (DMP‐30) as a tertiary amine. In applications of this new thiirane resin as civil and architectural adhesives, a superior curing ability at low temperature was attained. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2953–2957, 2001 相似文献
14.
15.
环氧丙烯酸双酯树脂的合成与表征 总被引:3,自引:2,他引:3
探讨了季铵盐催化环氧树脂与丙烯酸的酯化反应过程中催化剂、反应温度、反应时间对反应过程的影响 ,对反应产物进行了化学分析和红外光谱表征。结果表明 ,反应过程中环氧基团和羧基基团的消耗速率是相当的 ,适当提高温度有利于酯化反应的进行 相似文献
16.
一种新型环氧树脂的合成及性能研究 总被引:2,自引:2,他引:2
以3-氯丙烯和苯酚为主要原料,合成了由1,2-二(2-羟基苯基)丙烷和1-(2-羟基苯基)-2-(4-羟基苯基)丙烷组成的混合物,以下简称为双酚P。然后,用双酚P和环氧氯丙烷为原料合成双酚P型环氧树脂。测定了25~60℃时双酚P型环氧树脂的粘度和固化材料的压缩强度、冲击强度。结果表明,双酚P型环氧树脂的粘度低于环氧值相近的E-44环氧树脂,其固化材料的压缩强度和冲击强度都高于E-44固化材料。 相似文献