Dual-mode filters with conductor-loaded dielectric resonators

In this paper, a new class of dual-mode microwave filters is presented. These devices use conductor-loaded dielectric resonators with unloaded Q-factors of 2000-8000 achievable in half the physical size of TEM filters and with good spurious performance. The basic properties of this resonator have been examined with the aid of a finite-element field-analysis package. Fundamental design rules for bandpass filters have been developed. A design example of a transmit filter for a ground-signal-metal cellular-radio base station is demonstrated     

Temperature-stable low-loss microwave filters using dielectric resonators

Recently developed high-permittivity low-loss temperature-stable dielectric materials have been used as resonators in microwave filters. The resulting low-loss filters possess extremely good temperature stability. Proper design and the use of metal-screw mode suppressors have eliminated the further problem in dielectric-resonator filters of spurious modes just above the passband.     

Tunable, temperature-compensated dielectric resonators and filters

A thermal and electromagnetic model of a tunable hybrid-mode dielectric double resonator is introduced and analyzed by the mode-matching technique. Results of the analysis show the temperature sensitivity of the structure as a function of the center frequency as well as the other resonator parameters. A simple optimization procedure which allows the design of the resonator to have both a wide tunability range and good thermal stability of the resonant frequency is described. A circuit model is presented for a tunable four-pole dual-mode filter. The model exhibits interesting dual passbands, separated by a very-high-attenuation stopband. Measured results obtained from an experimental four-pole dual-mode dielectric resonator filter designed using the tunable hybrid-mode resonators showed excellent tunability range (200 MHz at C-band) and good agreement with the circuit model     

Low-pass and high-pass filters using coaxial-type dielectric resonators

This paper proposes new low-pass and high-pass filters using coaxial-type dielectric resonators. The low-pass filter has a LC-type circuit structure and is composed of three inductances and two resonance circuits. The resonance circuits are the open-ended coaxial-type dielectric resonators whose length is λg/4. The high-pass filter has a CL-type circuit structure. Two high-pass filters are described, one of them is composed of three capacitances andtwo resonance circuits, the other is composed of five capacitances and four resonance circuits. The operating frequency range of the low-pass filter is 0.13–0.9 GHz and the cutoffency is 900 MHz, and the insertion loss is 0.3 dB. The corresponding quantities of the high-pass filter are 0.9–2.5 GHz, 900 MHz, and 0.3 dB, respectively.     

A novel coupled method for dual-mode dielectric resonators andwaveguide filters

A novel method for coupling dual-mode waveguide or dielectric resonator cavities is described and analyzed. The method has advantages of providing a practical, flexible, economic means of replacing irises, of offering easy tunability of the coupling over a wide range of coupling values, and of reducing the length of the coupling structure. Calculation of the resonator's coupling parameters using the mode-matching method yields accurate results and is verified by measurements. Experimental four-pole dual-mode elliptic function filters using the coupling method for empty cavities and dielectric-resonator-loaded cavities were constructed and tested. The test results showed excellent agreement with theoretical analysis     

Stripline bandpass filters with step-impedance resonators

Research results for stripline bandpass filters with step-impedance resonators formed on Al₂O₃ (Alumina, polycor) and operating in the frequency band 1500–2500 MHz are presented in this article. Use of step-impedance resonators breaks repetition factor in frequency positioning of passbands in such filters. This allows suppressing harmonics of output signal in transmitters and widening stopband for parasitic signals in receivers.     

Microwave resonators with dual-mode oscillations

Analysis of microwave resonators with dual-mode oscillations is conducted. A new type of resonators is discovered in which dual-node oscillations are observed. It represents a half-wave resonator with a short-circuit in the middle part. The length of such a resonator is twice less than the length of a widely used ring resonator. It is shown that in resonators of the loop type combined frequency tuning of dual-mode oscillations is accomplished using capacity and inductance. In the loop-type resonators with a stub frequency tuning of dual-mode oscillations is accomplishing with two capacities synchronously changing their values according to a specific law. Resonance equations are obtained.     

基于光子学方法的负系数微波带通滤波器

光通信中,为了实现具有负系数特性的基于光子学方法的微波滤波器,采用了一种基于位相调制到强度调制转换的新颖而简单的方法。一个系数可转化的双抽头负系数全光微波带通滤波器得到了验证。结果表明,该滤波器不仅实现了负系数,其各项特性也得到了改善。     

Dual-band-stop filters with unsymmetrical T-shape DGS resonators

A kind of dual-band-stop filter with an unsymmetrical T-shape defected ground structure （DGS） is proposed. The filter has two band gap centers at 4.9 GHz and 7.35 GHz, respectively, where the two centre frequencies are just the second and third harmonics 2.45 GHz. The filters with high band-stop performance and wideband spurious suppression can be achieved by cascading miniaturized unsymmetrical T-shape DGS. The attenuation of three-cascaded T-shape DGS filter is 30.77 dB at 4.9 GHz and 17.96 dB at 7.35 GHz respectively. The above experimental results are in good agreement with the simulation results, especially for the third harmonic.     

Modified method for the analysis and design of microwave bandpass filters containing dielectric resonators

High-Q dielectric resonators having remarkable advantages such as compactness, light weight, temperature stability, and low cost have become very valuable elements for various microwave circuits. A modified Itoh and Rudokas model is proposed to analyse the field distribution and the coupling relations between dielectric resonators and microstrip lines based on the analysis results, a convenient procedure for designing microwave filters containing parallel coupled dielectric resonators is presented. Two experimental dielectric resonator filters are also fabricated to verify the calculation and the design procedure. The outcome demonstrates that the procedure provides good accuracy and saves design time.     

基于介质环谐振器的集成多频段滤波器的设计

多频段射频通信采用集成的多频段带通滤波器,该滤波器以环形谐振器为基础,如同心圆介质环形谐振器。通过使用同心环结构构造多频带通滤波器,大大降低了在多频带运行的多滤波器对印刷电路板(PCB)的实际需求。基于同心圆谐振器的多频带通滤波器的各种配置为移动设备的多频带移动设备的布局设计和制造提供了灵活性。这些同心圆谐振器的配置可以包括但不限于槽耦合配置、直接耦合配置和嵌入式直接耦合配置。在封装技术中具有重要作用。     

Theory of Fabry-Perot resonators with dielectric medium

A Fabry-Perot resonator filled with a dielectric slab is investigated using the Vainshtein method. Simple and explicit formulas are obtained for the diffraction loss, phase shift, and field distributions for both strip and circular mirrors. It is found that the presence of the dielectric reduces the diffraction loss, and causes mode confinement to certain degrees.     

Microwave active filters based on coupled negative resistancemethod

A novel coupled negative resistance method for building a microwave active bandpass filter is introduced. Based on this method, four microstrip line end-coupled filters were built. Two are fixed-frequency one-pole and two-pole filters, and two are tunable one-pole and two-pole filters. In order to broaden the bandwidth of the end-coupled filter, a modified end-coupled structure is proposed. Using the modified structure, an active filter with a bandwidth up to 7.5% was built. All of the filters show significant passband performance improvement. Specifically, the passband bandwidth was broadened by a factor of 5 to 20     

Microwave photonic filters based on optical semiconductor amplifier

Microwave photonic filters have been characterized by low loss,light weight,broad bandwidth,good tunability,and immunity to electromagnetic interference,and these filters can overcome inherent electronic limitations.Fiber-based filters are inherently compatible with fiber-optic microwave systems and can provide connectivity with built-in signal conditioning.This review paper presents developments of microwave photonic filters based on semiconductor optical amplifier in the last few years.Challenges in system implementation for practical application are also discussed.     

FDTD analysis of dielectric resonators with curved surfaces

In this paper, the finite-difference time-domain (FDTD) method is applied to calculate the resonant frequency of dielectric resonators (DRs) with curved surface. The contour-path integral FDTD (CFDTD) is modified to deal with the curved surface of the dielectric body while the traditional rectangular cells are maintained. Results are compared with theoretical values and staircase approximation, and show that the present method is more accurate than the staircase approximation     

Microwave performance of GaAs MOSFET with wet thermally oxidized InAlP gate dielectric

This paper reports the first demonstration of a microwave-frequency operation of a GaAs MOSFET fabricated using a wet thermal oxidization of InAlP lattice-matched to GaAs to form a native-oxide gate insulator. Devices with 1-/spl mu/m gate lengths exhibit a cutoff frequency (f/sub t/) of 13.7 GHz and a maximum frequency of oscillation (f/sub max/) of 37.6 GHz, as well as a peak extrinsic transconductance of 73.6 mS/mm. A low-leakage current density of 3.8/spl times/10/sup -3/ A/cm/sup 2/ at 1-V bias for an MOS capacitor demonstrates the good insulating properties of the /spl sim/ 11-nm thick native gate oxide.     

High-Q channel-dropping filters using ring resonators with integrated SOAs

The filter response of single-ring resonators with integrated semiconductor optical amplifiers based on GaInAsP-InP is presented. The devices with free spectral ranges of 25 and 50 GHz have the form of a racetrack. An on-off ratio of 20 dB, a full-width at half-maximum of 12 and 24 pm, a finesse of 17, and a Q factor of 130,000 and 65,000, respectively, have been achieved. The tuning to a specific wavelength is performed by using integrated Pt-resistors.     

Compact lowpass filters with very sharp transition bands based on open complementary split ring resonators

It is shown that open complementary split ring resonators (OCSRRs) are useful particles for the design of lowpass filters with very narrow transition bands in microstrip technology. Owing to the small electrical size of OCSRRs, the filters are also very small. These filters are implemented by cascading several OCSRR stages in a microstrip line. The OCSRR stages can be modelled as parallel resonators in series configuration, thus providing a transmission zero at their resonance frequency. By designing the OCSRRs with small inductance and high capacitance, very sharp cutoffs are achieved. To illustrate the possibilities of the approach, a prototype device example is provided. It consists on a five-stage periodic microstrip lowpass filter with 3 dB insertion losses at 1.33 GHz and 40 dB rejection at 1.45 GHz. To improve out-of-band rejection, four additional OCSRR stages tuned at the spurious frequency band have been cascaded. Filter dimensions are 39 x 7.4 mm (i.e. 0.46l x 0.087l, where l is the guided wavelength at the cutoff frequency). These filters are of interest in applications where small size and severe cutoff requirements are required.     

COMPUTER-AIDED OPTIMIZATION DESIGN OF BANDPASS FILTER WITH DIELECTRIC RESONATORS

By way of employing a multimode method together with the multimode transmission matrixtechnique based on the theory of planar circuits, the paper presents computer-aided design and optimized de-sign of bandpass fllters with dielectric resonators, and their sample was tested. The experimental result ofthe sample shows a reasonable agreement with the designed one.     

Broadband bandpass filters using slotted resonators fed by interdigital coupled lines for improved upper stopband performances

This paper proposes new broadband microstrip bandpass filters based on slotted linear tapered-line resonator (SLTR) and slotted step impedance resonator (SSIR) structures for size reduction and improved stopband performances. A comprehensive treatment of slotted resonators and both ends of the resonator with interdigital coupled lines is described. The design concept is demonstrated by two filter examples including one with an SLTR and another one with an SSIR. These filters have not only compact size but also a wider upper stopband resulting from resonator bandstop characteristics. The simulated and experimental results of stopband performances are better than 15 dB for a frequency range up to 25 GHz.