An α-K3PMo3W9O40 film loaded with silver nanoparticles: Fabrication, characterization and properties

A composite film consisting of the mixed-addenda Keggin-type polyoxometalate α-K₃PMo₃W₉O₄₀ (PMo₃W₉) and silver nanoparticles (AgNPs) was fabricated on quartz, silicon, and ITO by the layer-by-layer self-assembly method. The regular growth of the multilayer film was monitored by UV–vis spectroscopy, and the morphology was measured by atomic force microscopy (AFM). The multilayer film embedded by AgNPs exhibited the photo-luminescence ascribed to electronic transitions from excited states to d levels of the silver nanoparticles. The composite film also showed electrocatalytic activity towards reduction of NO₂⁻, H₂O₂, ClO₃⁻, BrO₃⁻, and IO₃⁻ attributed to tungsten-centered and molybdenum-centered redox processes of PMo₃W₉.     

A novel Keggin-type tungstogermanate dimer bearing dinuclear copper-organic coordination ions: {H8[Cu(phen)(μ2-CH3COO)2Cu(phen)(H2O)]2[Ge2W23CuO80]} · 24H2O

An unprecedented Keggin-type tungstogermanate dimer bearing dinuclear copper-organic coordination ions {H₈[Cu(phen)(μ₂-CH₃COO)₂Cu(phen)(H₂O)]₂[Ge₂W₂₃CuO₈₀]} · 24H₂O has been synthesized and characterized by IR, UV, ICP analyses, ESR spectra, element analysis, TG and single crystal X-ray diffraction analysis. The compound is built up from a dimeric heteropolyanion constituted by two corner-shared Keggin-type building subunits and two dinuclear copper-organic coordination cations [Cu(phen)(μ₂-CH₃COO)₂Cu(phen)(H₂O)]²⁺, each of which consists two square pyramidal copper-phen ions bridged by two μ₂-acetate ligands.     

A zirconium-containing sandwich-type dimer based on trivacant α- and β-[GeW9O34] units, [Zr3O(OH)2(α-GeW9O34)(β-GeW9O34)]

A new zirconium-containing sandwich-type dimer based on trivacant α- and β-[GeW₉O₃₄]¹⁰⁻ units, [Zr₃O(OH)₂(α-GeW₉O₃₄)(β-GeW₉O₃₄)]¹²⁻, was synthesized and characterized by IR spectroscopy, UV electronic spectroscopy and single crystal X-ray diffraction. The central bent of the polyanion contains three oxygen atoms alternating with the three zirconium atoms. The polyanion represents a rare example of the sandwich POMs containing two different isomer subunits.     

Effect of ceria on the structure and catalytic activity of V2O5/TiO2–ZrO2 for oxidehydrogenation of ethylbenzene to styrene utilizing CO2 as soft oxidant

The present study was undertaken to investigate the influence of ceria on the physicochemical and catalytic properties of V₂O₅/TiO₂–ZrO₂ for oxidative dehydrogenation of ethylbenzene to styrene utilizing CO₂ as a soft oxidant. Monolayer equivalents of ceria, vanadia and ceria–vanadia combination over TiO₂–ZrO₂ (TZ) support were impregnated by a coprecipitation and wet impregnation methods. Synthesized catalysts were characterized by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, temperature programmed reduction, transmission electron microscopy and BET surface area methods. The XRD profiles of 550 °C calcined samples revealed amorphous nature of the materials. Upon increasing calcination temperature to 750 °C, in addition to ZrTiO₄ peaks, few other lines due to ZrV₂O₇ and CeVO₄ were observed. The XPS V 2p results revealed the existence of V⁴⁺ and V⁵⁺ species at 550 and 750 °C calcinations temperatures, respectively. TEM analysis suggested the presence of nanosized (<7 nm) particles with narrow range distribution. Raman measurements confirmed the formation ZrTiO₄ under high temperature treatments. TPR measurements suggested a facile reduction of CeO₂–V₂O₅/TZ sample. Among various samples evaluated, the CeO₂–V₂O₅/TZ sample exhibited highest conversion and nearly 100% product selectivity. In particular, the addition of ceria to V₂O₅/TZ suppressed the coke deposition and allowed a stable and high catalytic activity.     

Promotional effect of H2 on CO oxidation over Au/TiO2 studied by operando infrared spectroscopy

The oxidation of carbon monoxide in the presence of various concentrations of molecular hydrogen has been studied over a Au/TiO₂ reference catalyst by combining diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and mass spectrometry. It is shown for the first time that H₂ enhances the CO oxidation rate on Au/TiO₂ without leading to any major loss of selectivity. Increasing the H₂ pressure induces higher CO and H₂ oxidation rates. Under H₂-free conditions, the surface species detected are Au^δ+–CO, Ti⁴⁺–CO, carbon dioxide and carbonates. Upon the addition of H₂, Au⁰–CO, water and hydroxyl groups become the main surface species. The occurrence of a preferential CO oxidation mechanism involving H_xO_y species under the present experimental conditions is proposed.     

Sorption–Desorption of NOx from a Lean Gas Mixture on H3PW12O40·6H2O Supported on Carbon Nanotubes

NO _x sorption capacities and efficiencies were measured on a new type of sorbent formed by 12-tungstophosphoric acid (HPW) supported on carbon nanotubes. On such a system, the sorption of both NO and NO₂ was observed but compared with HPW alone, a complementary sorption of NO _x is possible leading to a capacity of 25 mg/g_HPW at 300 °C with an efficiency of 50%. The sorption results from the formation of a [H⁺(NO₂ ^–,NO⁺)] complex on HPW and an additional mode of adsorption by a free-nitrate which was identified by the bands at 2261, 1384 and 1295 cm^–1 using infrared spectroscopy.     

Self-assembled chloro-bridged metallo-prismatic cations of the general formula [M6(η-C5Me5)6(μ3-tpt)2(μ-Cl)6] (M = Rh, Ir; tpt = 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine)

Two cationic pentamethylcyclopentadienyl metal-based hexanuclear complexes with trigonal prismatic architecture have been synthesised through a two-step strategy. The dinuclear complexes [M(η⁵- C₅Me₅)(μ-Cl)Cl]₂ (M = rhodium and iridium) react with 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine (tpt) in dichloromethane to give the trinuclear complexes [Rh₃(η⁵-C₅Me₅)₃(μ₃-tpt)Cl₆] (1) and [Ir₃(η⁵-C₅Me₅)₃(μ₃-tpt)Cl₆] (2), respectively. Addition of silver triflate to 1 and 2 in dichloromethane connects two identical triangular panels to form the hexanuclear metallo-prismatic cations [Rh₆(η⁵-C₅Me₅)₆(μ₃-tpt)₂(μ-Cl)₆]⁶⁺ (3) and [Ir₆(η⁵-C₅Me₅)₆(μ₃-tpt)₂(μ-Cl)₆]⁶⁺ (4), respectively. Cations 3 and 4 have been isolated as their triflate salts and characterised by ¹H NMR, IR and UV/visible spectroscopy.     

Synthesis, structure and photoluminescence of a novel palladium(I) compound: [Pd3(μ3-Cl)2(dppp)3][Pd2(μ2-Cl)3(PPh3)2](PPh3)2

Pd(PPh₃)₂Cl₂ reacts with PdCl₂ and 1,3-bis(diphenylphosphine)propane (dppp) in ethanol–DMF–pyridine mixed solvent to yield a novel palladium(I) compound [Pd₃(μ₃-Cl)₂(dppp)₃][Pd₂(μ₂-Cl)₃(PPh₃)₂](PPh₃)₂. It features an isolated structure based on [Pd₃(μ₃-Cl)₂(dppp)₃]⁺ cations having triangulo-palladium clusters and [Pd₂(μ₂-Cl)₃(PPh₃)₂]⁻ anions in which the coordination environment of palladium is an unusual tetrahedral geometry. Its photoluminescence is measured.     

Fabrication of zero-thermal-expansion ZrSiO4/Y2W3O12 sintered body

We focused on the linear negative thermal expansion of Y₂W₃O₁₂ in a wide-temperature range and on the chemical stability of ZrSiO₄ in the fabrication of the composite material ZrSiO₄/Y₂W₃O₁₂ with a zero-thermal-expansion. The compact composed of Y₂W₃O₁₂ and ZrSiO₄ had a thermal shrinkage rate smaller than that of Y₂W₃O₁₂ and higher than that of ZrSiO₄. SEM–EDX observation clarified that the ZrSiO₄/Y₂W₃O₁₂ sintered body fabricated at 1400 °C for 10 h had a microstructure composed of ZrSiO₄ and Y₂W₃O₁₂ grains, and XRD indicated that only ZrSiO₄ and Y₂W₃O₁₂ phases existed in the sintered body. The relative density of the ZrSiO₄/Y₂W₃O₁₂ sintered body reached 92%, which was larger than that of the ZrSiO₄ sintered body because Y₂W₃O₁₂ grains could be sintered at lower temperatures. The average linear thermal expansion coefficients of the ZrSiO₄/Y₂W₃O₁₂ sintered body were −0.4 × 10⁻⁶ and −0.08 × 10⁻⁶ °C⁻¹ in the temperature ranges from 25 to 500 °C and from 25 to 1000 °C, respectively, which showed an almost zero-thermal-expansion.     

Esterification over rare earth oxide and alumina promoted SO4/ZrO2

Solid superacid catalysts including SO₄²⁻/ZrO₂ (SZ), rare earth (RE) oxide-promoted SZ and RE oxides together with alumina-promoted SZ were prepared. Their catalytic performances in the esterification reaction of ethanol and acetic acid were investigated. The textural property, crystalline phase and surface acidity of the prepared catalysts were characterized by using nitrogen adsorption–desorption isotherms, X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy of pyridine adsorption techniques, respectively. Effects of the reaction time and catalyst reuse cycle as well as catalyst regeneration on the catalytic behaviors were studied. Experimental results showed that Yb₂O₃–Al₂O₃ promoted SZ (designated as SZAY) catalyst exhibited an optimal esterification performance; the Lewis acid sites with moderate and super strong strength could mainly be responsible for the esterification reaction; and doping both Yb₂O₃ and Al₂O₃ on SZ not only boosted the esterification activity but also alleviated catalyst deactivation resulted from the surface sulfur loss by solvation.     

Electrical properties of Li1.3Ge1.4Ti0.3Al0.3(PO4)3 superionic ceramics

Preparation and electrical characterization of NASICON-type compound, Li_1.3Ge_1.4Ti_0.3Al_0.3(PO₄)₃, are described. The solid solution is obtained with Ge⁴⁺ → Ti⁴⁺ and Ge⁴⁺ → Al³⁺ substitutions in LiGe₂(PO₄)₃. The powder has been fabricated by a solid state reaction and the structural characteristics of it have been studied by X-ray. Ceramic samples have been sintered by varying the sintering duration from 1 to 3 h. Samples were studied by complex impedance spectroscopy in the frequency range 1 MHz-1.2 GHz and temperature range 300-600 K. Two regions of relaxation dispersion were found. The dispersions were related to the fast Li⁺ ion transport in the grains and grain boundaries. Variation of the sintering duration has no considerable effect on electrical properties of the ceramics.     

Structure of a methylamine sorption complex of fully dehydrated Cd-exchanged zeolite X, Cd46(CH3NH2)16[Si100Al92O384]-FAU

The structure of a methylamine sorption complex of fully dehydrated, fully Cd²⁺-exchanged zeolite X, Cd₄₆(CH₃NH₂)₁₆[Si₁₀₀Al₉₂O₃₈₄]-FAU (a = 24.863(4) Å), has been determined by single-crystal X-ray diffraction techniques in the cubic space group at 21(1) °C. An aqueous exchange solution 0.05 M in Cd²⁺ was allowed to flow past the crystal for 5 days. The crystal was then dehydrated at 480 °C and 2 × 10⁻⁶ Torr for 2 days (colorless), and exposed to 160 Torr of methylamine gas at 21(1) °C for 2 h (yellow). Diffraction data were then gathered in this atmosphere and were refined using all data to the final error indices (based upon the 524 reflections for which F_o > 4σ(F_o)) of R₁ = 0.069 and wR₂ = 0.200. In this structure, Cd²⁺ ions occupy three crystallographic sites. The octahedral sites I at the centers of the hexagonal prisms are filled with 16 Cd²⁺ ions per unit cell (Cd–O = 2.369(8) Å). The remaining 30 Cd²⁺ ions are located at two non-equivalent sites II with occupancies of 14 and 16. The 16 methylamine molecules per unit cell lie in the supercage where each interacts with one of the latter 16 site-II Cd²⁺ ions: N–Cd = 2.11(8) Å. The imprecisely determined N–C bond length, 1.49(22) Å, agrees with that in gaseous methylamine, 1.474 Å. The positions of the hydrogen atoms were calculated. It appears that one of the amino hydrogen atoms hydrogen bonds to a 6-ring oxygen, and that the other forms a bifurcated hydrogen bond to this and another 6-ring oxygen. The methyl group is not involved in hydrogen bonding.     

Direct formation of H2O2 from H2 and O2 and decomposition/hydrogenation of H2O2 in aqueous acidic reaction medium over halide-containing Pd/SiO2 catalytic system

Formation of H₂O₂ from H₂ and O₂ and decomposition/hydrogenation of H₂O₂ have been studied in aqueous acidic medium over Pd/SiO₂ catalyst in presence of different halide ions (viz. F⁻, Cl⁻ and Br⁻). The halide ions were introduced in the catalytic system via incorporating them in the catalyst or by adding into the reaction medium. The nature of the halide ions present in the catalytic system showed profound influence on the H₂O₂ formation selectivity in the H₂ to H₂O₂ oxidation over the catalyst. The H₂O₂ destruction via catalytic decomposition and by hydrogenation (in presence of hydrogen) was also found to be strongly dependent upon the nature of the halide ions present in the catalytic system. Among the different halides, Br⁻ was found to selectivity promote the conversion of H₂ to H₂O₂ by significantly reducing the H₂O₂ decomposition and hydrogenation over the catalyst. The other halides, on the other hand, showed a negative influence on the H₂O₂ formation by promoting the H₂ combustion to water and/or by increasing the rate of decomposition/hydrogenation of H₂O₂ over the catalyst. An optimum concentration of Br⁻ ions in the reaction medium or in the catalyst was found to be crucial for obtaining the higher H₂O₂ yield in the direct synthesis.     

New ferrocene-derived hydroxymethylphosphines: FcP(CH2OH)2 [Fc=(η-C5H5)Fe(η-C5H4)] and the dppf analogue 1,1-Fc[P(CH2OH)2]2 [Fc=Fe(η-C5H4)2]

Reactions of the ferrocene-phosphines FcPH₂ and 1,1^′-Fc^′(PH₂)₂ with excess formaldehyde gives the new hydroxymethylphosphines FcP(CH₂OH)₂ 1 and 1,1^′-Fc^′[P(CH₂OH)₂]₂ 2, respectively. Phosphine 1 is an air-stable crystalline solid, whereas 2 is isolated as an oil. Reaction of 1 with H₂O₂, S₈ or Se gives the chalcogenide derivatives FcP(E)(CH₂OH)₂ (E=O, S or Se), whilst reaction of 2 with S₈ gives 1,1^′-Fc^′[P(S)(CH₂OH)₂]₂, which were fully characterised. Phosphine 1 was also characterised by an X-ray crystal structure determination.     

Selective oxidation of C3–C4 olefins over Mo-containing catalysts with tetragonal tungsten bronze structure

Mo–V–Nb–P–O-based catalysts with a tetragonal tungsten bronze-type (TTB) structure have been prepared hydrothemally from a H₃PMo₁₂O₄₀ Keggin-type heteropolyacid. These catalysts have been tested in the oxidation of C₃–C₄ olefins (propene, isobutene and 1-butene). Although the catalytic performance depends on the nature of the olefin fed the TTB-type catalysts prepared in the presence of elements of the V and VI groups such as Te, Sb and Bi have shown a high selectivity to partial oxidation products, especially that with Te. However, in the absence of these elements the TTB-catalysts present a high catalytic activity to deep oxidation. The selectivity to partial oxidation products decreases in the order: MoVNbPTe- > MoVNbPSb- > MoVNbPBi- > MoVNbP-TTB catalysts. The reaction products obtained in the oxidation of each olefin will be discussed according to their corresponding reaction mechanism and the characteristics of catalysts.     

Biodiesel production from soybean oil catalyzed by multifunctionalized Ta2O5/SiO2-[H3PW12O40/R] (R = Me or Ph) hybrid catalyst

Mesoporous Ta₂O₅ materials functionalized with both alkyl group and a Keggin-type heteropoly acid, Ta₂O₅/SiO₂-[H₃PW₁₂O₄₀/R] (R = Me or Ph), was prepared by a single step sol–gel co-condensation method followed by a hydrothermal treatment in the presence of a triblock copolymer surfactant. The catalytic performance of the resulting multifunctionalized organic–inorganic hybrid materials was evaluated by a direct use of soybean oil for biodiesel production in the presence of 20 wt% myristic acid under atmosphere refluxing, and the influences of the catalyst preparation approaches, functional component loadings, and molar ratios of oil to methanol on the catalytic activity of the Ta₂O₅/SiO₂-[H₃PW₁₂O₄₀/R] were studied. In addition, the recyclability of the hybrid materials was evaluated via four catalytic runs. Finally, the network structures of the hybrid materials and the functions of the incorporated alkyl groups on the catalytic activity of the materials were put forward.     

Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteries

Cr-doped Li₃V_2−xCr_x(PO₄)₃/C (x = 0, 0.05, 0.1, 0.2, 0.5, 1) compounds have been prepared using sol–gel method. The Rietveld refinement results indicate that single-phase Li₃V_2−xCr_x(PO₄)₃/C with monoclinic structure can be obtained. Although the initial specific capacity decreased with Cr content at a lower current rate, both cycle performance and rate capability have excited improvement with moderate Cr-doping content in Li₃V_2−xCr_x(PO₄)₃/C. Li₃V_1.9Cr_0.1(PO₄)₃/C compound presents an initial capacity of 171.4 mAh g⁻¹ and 78.6% capacity retention after 100 cycles at 0.2C rate. At 4C rate, the Li₃V_1.9Cr_0.1(PO₄)₃/C can give an initial capacity of 130.2 mAh g⁻¹ and 10.8% capacity loss after 100 cycles where the Li₃V₂(PO₄)₃/C presents the initial capacity of 127.4 mAh g⁻¹ and capacity loss of 14.9%. Enhanced rate and cyclic capability may be attributed to the optimizing particle size, carbon coating quality, and structural stability during the proper amount of Cr-doping (x = 0.1) in V sites.     

Synthesis and characterization of mesoporous Ta2O5–TiO2 photocatalysts for water splitting

Two series of Ta₂O₅–TiO₂ photocatalysts (Ta:Ti = 4:1, 1:1 and 1:4) were prepared by sol–gel technique applying triblock copolymer of Pluronic P123 and were tested in platinized form (0.3 wt.%) in photodecomposition of water under ultraviolet and visible light (λ > 300 nm). It was found the mesoporous character of tantalum containing catalysts with relatively high surface area (100–130 m² g⁻¹) of these samples. However, higher concentration of TiO₂ in mixed oxides leads to the destruction of mesoporous character of synthesized photocatalysts. All samples were characterized with thermogravimetry, XRD, N₂ physisorption, DR-UV–vis and FTIR spectroscopy. The mixed oxides of Ta₂O₅–TiO₂ system showed much lower band-gap than pure Ta₂O₅ and relatively high activity in platinized state in photocatalytic hydrogen generation under visible. Doping of pure oxides and mixed systems with sulfur resulted in lowering of the band-gap values below 3 eV and much better activity in H₂ evolution reaction. Non-platinized photocatalysts showed activity in liquid phase cyclohexene photooxidation at 305 K.     

Photocatalytic reduction of Ag2SO4 by the Dawson anion α-[P2W18O62] and tetracobalt sandwich complexes

The photocatalytic behaviours of the Dawson salt α-K₆[P₂W₁₈O₆₂] and two isomers of the tetracobalt Dawson-derived sandwich complexes, αββα-Na₁₇[Co₄(H₂O)(OH)(P₂W₁₅O₅₆)₂]·51H₂O·2NaCl and ααβα-Na₁₆[Co₄(H₂O)₂(P₂W₁₅O₅₆)₂]·51H₂O (abbreviated ββ-{Co₄P₄W₃₀} and αβ-{Co₄P₄W₃₀}, respectively), are described and compared.The direct photochemical excitation of the polyoxometalates (POM) in the presence of propan-2-ol as electron donor leads to their reduction. With polyoxometalates as photocatalyst and propan-2-ol as sacrificial electron donor, the reduction of Ag^I₂SO₄ from aqueous solutions is observed leading to metallic Ag_n⁰ clusters and colloidal metal nanoparticles stabilized by POM.In the case of both {Co₄P₄W₃₀}, TEM experiments reveal that most of the Ag_n particles obtained with a slight excess of Ag⁺ are spherical with a quite large distribution in size between 10 and 100 nm.     

A crucial role of O2 and O2 on mayenite structure for biomass tar steam reforming over Ni/Ca12Al14O33

Newly synthesized nickel calcium aluminum catalysts (Ni/Ca₁₂Al₁₄O₃₃) were tested in a fixed bed reactor for biomass tar steam reforming, toluene as tar destruction model compound. Four catalysts (Ni/Ca₁₂Al₁₄O₃₃) were prepared with Ni loading amount from 1, 3, 5 to 7 wt%, even 1% loading catalyst also showed excellent performance. Catalysts aged experiments in the absence (60 h on stream) and presence of H₂S were characterized by BET, X-ray diffraction (XRD), and Raman spectra. It was observed that Ni/Ca₁₂Al₁₄O₃₃ showed excellent sustainability against coke formation due to the “free oxygen” in the catalysts. It also exhibited higher H₂S-poisoning resistance property compared to the commercial catalysts Ni/Al₂O₃ (5%) and Ni/CaO_0.5/MgO_0.5. Raman spectra revealed that “free oxygen O₂⁻ and O₂²⁻” in the structure of the catalysts could be substituted by sulfur then protected Ni poisoning on some degree, but reactivation experiments by O₂ flowing showed that the sulfide Ni/Ca₁₂Al₁₄O₃₃ was difficult to completely restore, incorporation of sulfur in the structure only partly regain by O₂. The kinetic model proposes, as generally accepted, a first-order reaction for toluene with activation energy of 82.06 kJ mol⁻¹ was coincident with the literature data. The Ni/Ca₁₂Al₁₄O₃₃ catalyst was effective and relative cheap, which may be lead to reduction in the cost of hot gas cleaning process.