Copolycondensation of IPA/TPA,BPA, and 4,4′‐dihydroxydipehnylsulfone and 4,4′‐dicarboxydiphenylsulfone

Copolycondensations of IPA, TPA, bisphenol A (BPA), and several cimonomers were carried out to improve thermal properties, such as, the glass transition temperature (T_g) of the IPA/TPA (50/50)–BPA polyester. Among the comonomers examined, 4,4′‐Dihydroxydiphenylsulfone (BPS) and 4,4′‐Dicarboxydiphenylsulfone (DCDPS) having a strongly dipolar sulfonyl group in the chain were significantly effective. The favorable effect upon the T_gs was studied by varying the amounts of BPS and DCDPS incorporated into the copolymers. In the copolycondensation with BPS, two‐stage copolycondensation of BPA first and then BPS, the reverse order of reaction, and their spontaneous addition were examined to investigate the effect of distribution of the BPS unit segments in the copolymer upon the T_gs of the resulted copolymers. The distribution was briefly studied from distribution of the IPA/TPA‐BPA oligomers in the initial reaction using GPC. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 875–879, 2000     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Preparation and characterization of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride-pyromellitic diahydride alternating polyimides

Four kinds of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA)-pyromelliitic dianhydride (PMDA) alternating polyimide (BTDA-PMDA API) were obtained by reacting 1 mol BTDA with 2 mol diamines to form BTDA chain-extended diamines (BTDA CED), followed by the addition of 1 mol PMDA to yield the BTDA-PMDA alternating polyamic acids (BTDA-PMDA APA), and finally by imidizing them thermally. BTDA CED were characterized by elemental analysis, infrared (IR), and ¹H-NMR spectroscopy. The structures of BTDA-PMDA APA and BTDA-PMDA API were investigated by IR and ¹H-NMR spectroscopy, and their thermal properties and interfacial tension were also studied. Furthermore, the characteristic properties of BTDA-PMDA API were compared with their corresponding homopolyimides from BTDA (BTDA HPI) and from PMDA (PMDA HPI). It was found that the alternating condensation polymerization is an effective method to modify polyimides interfacial tension with a small influence on the thermal stability. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1585–1593, 1997     

Two novel Zn(II) coordination polymers based on trigonal ligand: 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine

Two novel Zn(II) coordination polymers, [Zn₅(pytpy)₈(fum)₄(H₂O)₄(OH)₂]_n · n(CH₃OH) · 2n(H₂O) (1) and [Zn₃(pytpy)₄ (btc)₂]_n · 2n(H₂O) (2) (pytpy = 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine, H₂fum = fumaric acid, H₃btc = 1,3,5-benzenetricarboxylic acid) have been hydrothermally synthesized and structurally characterized. Complex 1 is a 2D layer structure, which is constructed from linear pentanuclear Zn(II) subunits interconnected via bidentate-bridging pytpy ligands and tridentate-bridging fum²⁻ anions. Complex 2 is a 3D network structure, μ₂-pytpy ligands link the layers based on the heart-like hexanuclear subunits to form the 3D network. Both complexes show strong fluorescence emission upon excitation at 310 nm in solid state. Additionally, these two complexes possess great thermal stabilities, especially for 2, the framework is stable up to 350 °C.     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Insensitive High Explosives II: 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF)

This paper reviews the synthesis, properties, performance, and safety of the insensitive explosive 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF, C₄H₄N₈O₃), CAS‐No. [78644‐89‐0], and 18 formulations based on it. Though having a moderate crystal density only, DAAF offers high positive heat of formation and hence superior performance when compared with TATB. It is friction and impact insensitive but is more sensitive to shock than TATB and has an exceptionally small critical diameter and performs very well at low temperatures unlike other insensitive explosives. 39 references to the public domain are given. For Part I see Ref. [1].     

A solid-state NMR study of aromatic polyimides based on 4,4′-diaminotriphenylmethane

The effect of different synthesis routes on the chemical and molecular order of polyimides based on 4,4′-diaminotripenylmethane (DA-TPM) and various aromatic dianhydrides (PI-TPM) was studied by solid-state carbon-13 nuclear magnetic resonance (¹³C-NMR). Polyimides were prepared by three different methods including a two-step procedure with either thermal or chemical imidization of precursor poly(amic acid)s (PAA) and one-step high-temperature polycondensation in phenolic solvents. Model compounds were also obtained and used in the assignment of the NMR signals. The NMR spectra for PI-TPMs obtained by one-step high-temperature polycondensation and—to a lesser extent—by thermal imidization of PAA, show sharper lines than those observed in the spectra of polymers prepared from PAA via chemical imidization. These differences are due mainly to the lower degree of ordering of the latter polyimides. WAXD patterns of polyimide films also indicated a less-ordered structure of the polymers resulting from the chemical imidization of PAA. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 1053–1064, 1998     

The preparation and properties of segmented‐chain liquid crystalline polyesters based on 4,4′‐dihydroxybiphenyl by interfacial polycondensation

Thermotropic homopolyesters were prepared through interfacial polycondensation of 4,4′‐dihydroxybiphenyl with sebacoyl chloride. The optimal conditions of the process, in terms of the best yield, were studied through investigating the type of organic phase, amount of phase transfer agent, time and temperature of reaction, and volume ratio of aqueous to organic phase. The structure of the sample that had the best yield (53.235% ± 5%) was determined by means of elemental analysis, infrared spectra, and X‐ray. The effect of the molar ratio of the monomers on the yield and inherent viscosity was investigated. The inherent viscosity of the samples varied between 0.095 and 0.25 dL/g. The mesophase formed at elevated temperatures was studied by differential scanning calorimetry, polarized light microscopy, and depolarizing transmittance measurements. Our observations revealed that poly(4, 4′‐diphenyl sebacate), in contrast to previous reports that suggest this polymer is smectgenic, could produce nematic phase. It could be concluded that the chemical structure ordering of the poly(4, 4′‐diphenyl sebacate) plays a significant role in its liquid crystalline behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1594–1606, 2005     

Reaction kinetics and thermal properties of epoxidised cresol novolac/4,4′‐diglycidyl (3,3′,5,5′‐tetramethylbiphenyl) epoxy resin composite cured with aromatic diamine

A series of novel composites based on different ratios of epoxidised cresol novolac (ECN) and 4,4′‐diglycidyl(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP) have been prepared with the curing agent 4,4′‐methylenediamine (DDM) and 4,4′‐diaminodiphenylsulfone (DDS), respectively. The investigation of cure kinetics was performed by differential scanning calorimetry using an isoconversional method. The high thermal stabilities of the cured samples were also studied by thermogravimetric analysis. In addition, no phase separation was observed for cured ECN/DDM and ECN/DDS blending with different amounts of TMBP by dynamic mechanical analysis and scanning electron microscopy. Moreover, the cured systems also exhibited excellent impact properties and low moisture absorption. All the results indicate that the ECN/TMBP/DDM and ECN/TMBP/DDS systems are promising materials in electronic packaging. Copyright © 2011 Society of Chemical Industry     

Synthesis, crystal structure and photoelectric property of two novel coordinated complexes constructed by 4,4′-bipyridine and sebacic acid

Two two-dimensional (2D) new complexes: [M(bpy)(C₁₀H₁₆O₄)H₂O] [M = Ni (1), Co (2); bpy = 4,4-bipyridine, C₁₀H₁₈O₄ = sebacic acid] were synthesized by the hydrothermal reaction at 180 °C and characterized by elemental analysis, infrared spectra, and thermogravimetric spectra, single-crystal X-ray diffraction and surface photovoltage spectrum (SPS). The single-crystal X-ray diffraction showed that both complexes are isomorphous, crystallized in monoclinic system, and space group P2₁/c. In addition, The results of SPS for complexes (1) and (2) indicate that these two complexes exhibit positive surface photovoltage response in the range of 300–800 nm, which can be assigned to LMCT and d → d^* electronic transition. The SPS spectra of the two complexes are consistent with their UV–Vis spectra.     

Investigation of the Solubility of 3,4‐Diaminofurazan (DAF) and 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF) at Temperatures Between 293.15 K and 313.15 K

The solubilities of 3,4‐diaminofurazan (DAF) and 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF) were investigated in water, dichloromethane, acetonitrile, ethyl acetate, methanol, and acetone between 293.15 K and 313.15 K. The solubility was determined by high‐pressure liquid chromatography with ultraviolet detection. The solubilities of DAF and DAAF are increased with the increasing of temperature in all solvents studied. The enthalpy of solution in each solvent was calculated according to van't Hoff Equation.     

Kinetics of 4,4′-diaminodiphenylmethane curing of bisphenol-S epoxy resin

The kinetics of the cure reaction for a system of bisphenol-S epoxy resin (BPSER), with 4,4′-diaminodiphenylmethane (DDM) as a curing agent, were studied by means of differential scanning calorimetry (DSC). Analysis of DSC data indicated that an autocatalytic behavior showed in the first stages of the cure, with the model proposed by Kamal, which includes two rate constants, k₁ and k₂, and two reaction orders, m and n. Rate constants k₁ and k₂ were observed to be greater when curing temperature increased. The over-all reaction order, m + n, is in the range of 2.5 ∼ 3. The activation energies for k₁ and k₂ were 55 kJ/mol and 57 kJ/mol, respectively. Diffusion control is incorporated to describe the cure in the latter stages. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1799–1803, 1999     

Preparation and properties of organo‐soluble polyimides based on 4,4′‐diamino‐3,3‐dimethyldiphenylmethane and conventional dianhydrides

4,4′‐Diamino‐3,3′‐dimethyldiphenylmethane was used to prepare polyimides in an attempt to achieve good organo‐solubility and light color. Polyimides based on this diamine and three conventional aromatic dianhydrides were prepared by solution polycondensation followed by chemical imidization. They possess good solubility in aprotonic polar organic solvents such as N‐methyl 2‐pyrrolidone, N,N‐dimethyl acetamide, and m‐cresol. Polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is even soluble in common solvents such as tetrahydrofuran and chloroform. Polyimides exhibit high transmittance at wavelengths above 400 nm. The glass transition temperature of polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and pyromellitic dianhydride is 370°C, while that from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is about 260°C. The initial thermal decomposition temperatures of these polyimides are 520–540°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1299–1304, 1999     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Bis(4′-phenyl-2,2′:6′,2″-terpyridine)ruthenium(II): Holding the {Ru(tpy)2} embraces at bay

The solid state structure of [Ru(Phtpy)₂][PF₆]₂ · 4MeCN has been determined (Phtpy = 4′-phenyl-2,2′:6′,2″-terpyridine); [Ru(Phtpy)₂]²⁺ cations pack into sheets by virtue of {M(tpy)₂}₂ embraces, and the MeCN solvent molecules are involved in NH–C interactions which prevent the efficient packing of adjacent sheets. Comparisons with related structures lead to some generalizations about packing motifs in salts containing [M(Phtpy)₂]²⁺ or [M(pytpy)₂]²⁺ cations (pytpy = 4′-pyridyl-2,2′:6′,2″-terpyridine).     

Ditopic, flexible hydrazone-based building blocks with pendant 2,2′:6′,2′′-terpyridine metal-binding domains

The synthesis and characterization of three new bis(2,2′:6′,2′-terpyridine) (tpy) ligands containing different hydrazone spacers between the metal-binding domains are described. Treatment of 1,4-benzenedicarbaldehyde bis(2,2′:6′,2′′-terpyridin-4′-ylhydrazone) (1) with [(tpy)RuCl₃] in the presence of N-ethylmorpholine results in the formation of [(tpy)Ru(μ-1)Ru(tpy)]⁴⁺. Single crystal X-ray diffraction data for [(tpy)Ru(μ-1)Ru(tpy)][PF₆]₄·8MeCN confirm the ability of the hydrazone-based ligand to bridge two ruthenium(II) centres, providing proof-of-principle for the application of this class of flexible ligand in the design of coordination polymers.     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

An investigation of cure and thermal stability of poly(amide‐amidic acid) modified tetraglycidyl 4,4′‐diaminodiphenylmethane/4,4′‐diaminodiphenylsulfone

In this work, poly(amide‐amidic acid) (PAA) was used to modify tetraglycidyl 4,4′‐diaminodiphenylmethane (TGDDM)/4,4′‐diaminodiphenylsulfone (DDS) system. Results of non‐isothermal differential scanning calorimetry analysis indicated that PAA played a role of catalyst during the process of the curing reaction. The curing mechanism was studied by Fourier transform infrared spectroscopy, showing that the PAA acted as a co‐curing agent in the system. The glass transition temperature decreased firstly and then increased with the increase of the PAA content. PAA equally rendered TGDDM more fire resistant with higher char yield. On examining the fracture surface morphology using scanning electron microscopy, it was observed that there was no obvious phase separation when the content of PAA was less than 20 phr (per hundred weight of TGDDM/DDS resin), however, phase separation was observed when the content of PAA was 25 and 30 phr. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electropolymerization of hydrogen bond supramolecular associations between terthiophene‐3‐acetic acid and 4,4′‐bipyridine

Supramolecular assemblies based on 4,4′‐bipyridine as hydrogen acceptor and a terthiophene carboxylic acid (3‐TTAA) as hydrogen donor were synthesized and characterized by Fourier transform IR spectroscopy and DSC. Their electropolymerization was successful in methylene chloride or acetonitrile. The concept of using such supramolecular assemblies in electropolymerization opens the way to the facile synthesis of new π‐conjugated polymers. © 2017 Society of Chemical Industry     

Cure and glass transition temperature of the bisphenol S epoxy resin with 4,4′‐diaminodiphenylmethane

The curing reaction of bisphenol S epoxy resin (BPSER) with 4,4′‐diaminodiphenylmethane (DDM) was studied by means of torsional braid analysis (TBA) in the temperature range of 393–433 K. The glass transition temperature (T_g) of the BPSER/DDM system is determined, and the results show that the reaction rate increases with increasing the T_g in terms of the rate constant, but decreases with increasing conversion. 1 The T_g of BPSER/DDM is about 40 K higher than BPAER/DDM. The gelation and vitrification time were assigned by the isothermal TBA under 373 K; in addition, an FTIR spectrum was carried out to describe the change of the molecular structure. The thermal degradation kinetics of this system was investigated by thermogravimetric analysis (TGA). It illustrated that the thermal degradation of the BPSER/DDM has n‐order reaction kinetics. 2 © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 794–799, 2000