Critical solution point and chain dimension of branched-polystyrene solutions

Summary Critical solution point and chain dimension were measured for branched polystyrene(BPS) in solution as a function of molecular weight(M) and compared with those for linear polystyrene(LPS). The critical concentration _c of BPS was quite different from that of LPS at a fixed M, but the same at a fixed overlap-concentration ^*, i.e., plots of _c vs. ^* fall on a single straight line for both BPS and LPS (gf_c ^*). Reduced critical temperature _c defined by gt_c=(–T_c)/ [T_c: critical temperature, : the -temperature] was related to _c as _{c c} ² for BPS, whereas _{c c} for LPS.     

Attraction ofCacoecimorpha pronubana male moths to synthetic sex pheromone blends in the wind tunnel

Attraction ofCacoecimorpha pronubana male moths to blends of four sex pheromone components was studied in the wind tunnel.Z11–14Ac alone did not elicit upwind flight, admixture of 10%Z11–14OH or more led to successful attraction of males to the source. Attractivity of these binary blends was further enhanced by addition ofE11–14Ac orZ9–14Ac; the optimum was a blend ofZ11–14Ac,Z11–14OH,E11–14Ac, andZ9–14Ac at the proportion of 1003033. In ternary and quaternary blends, the effect ofZ11–14OH andE11–14Ac was strongest at 30% and 3%, respectively. By contrast,Z9–14Ac increased behavioral responses over a wide range.     

Kinetics and Mechanism of Copolymerization of α-terpineol with Methylmethacrylate in Presence of Azobisisobutyronitrile as an Initiator

The radical copolymerization of -terpineol with methyl-methacrylate in xylene at 80±0.1C for 50 minutes in the presence of azobisisobutyronitrile (AIBN) follows ideal kinetics and results in the formation of a functional and random copolymer. The activation energy is 33 KJ/mole. The IR spectrum and NMR spectra of the copolymer(s) shows the bands at 1750 and 3400 cm^–1 for ester group of methylmethacrylate and alcoholic group of -terpineol and peaks at 3 to 4 for methoxy group and at 6.5 to 7.5 due to alcoholic group of methylmethacrylate and -terpineol repectively. The values of reactivity ratios, calculated by Kelen–Tüdos method, are r ₁ (MMA) = 0.18 and r ₂ (-terpineol) = 0.046. The Alfrey-Price; Q–e parameters for -terpineol has been calculated as 0.149 and 2.486. The mechanism of copolymerization has been elucidated and it is concluded that the double bond present in the monocyclic ring of -terpineol is an active site for copolymerization and the alcoholic group of -terpineol remain to give functional copolymer.     

Chemical modification of copoly(methylsilylene/1,4-phenylene) by Pt-catalyzed hydrosilation reactions with functionally substituted alkenes

Copoly(methyl-3-biphenoxypropylsilylene 1,4-phenylene), copoly(methyl-3-cyanopropylsilylene 1,4-phenylene), copoly(methyl-3-ethoxypropylsilylene 1,4-phenylene), copoly(methyl-3-phenoxypropylsilylene 1,4-phenylene), and copoly(methyl-4,7,10,13-tetraoxatetradecanylsilylene 1,4-phenylene) have been prepared by platinum-catalyzed hydrosilation graft reactions between poly (methylsilylene 1,4-phenylene) and appropriate functionally substituted alkenes. These polymers have been characterized by¹H,¹³C, and²⁹Si NMR as well as by FT-IR and UV-vis spectroscopy. The molecular weight distribution of these polymers has been determined by gel permeation chromatography (GPC), and their glass transition temperatures (T _e) by DSC.     

Mass diffusion-controlled bubble behaviour in boiling and electrolysis and effect of bubbles on ohmic resistance

A survey is given of theoretical asymptotic bubble behaviour which is governed by heat or/and mass diffusion towards the bubble boundary. A model has been developed to describe the effect of turbulent forced flow on both bubble behaviour and ohmic resistance. A comparison with experimental results is also made.Nomenclature ga liquid thermal diffusivity (m² s^–1) - B width of electrode (m) - c liquid specific heat at constant pressure (J kg^–1 K^–1) - C ₀ initial supersaturation of dissolved gas at the bubble wall (kg m^–3) - d bubble density at electrode surface (m^–2) - D diffusion coefficient of dissolved gas (m² s^–1) - D _h –4S/Z, hydraulic diameter, withS being the cross-sectional area of the flow andZ being the wetted perimeter (m) - e base of natural logarithms, 2.718... - f local gas fraction - F Faraday constant (C kmol^–1) - G evaporated mass diffusion fraction - h height from bottom of the electrode (m) - h _w total heat transfer coefficient for electrode surface (J s^–1 m^–2 K^–1) - h _w,conv convective heat transfer coefficient for electrode surface (J s^–1 m^–2K^–1) - H total height of electrode (m) - i electric current density (A m^–2) - j, j ^* number - J modified Jakob number,C ₀/ ₂ - enthalpy of evaportion (J kg^–1) - m density of activated nuclei generating bubbles at electrode surface (m^–2) - n product of valency and number of equal ions forming one molecule; for hydrogenn=2, for oxygenn=4 - p pressure (N m^–2) - p excess pressure (N m^–2) - R gas constant (J kmol^–1 K^–1) - R ₁ bubble departure radius (m) - R ₀ equilibrium bubble radius (m) - R/R relative increase of ohmic resistance due to bubbles, R, in comparison to corresponding value,R, for pure electrolyte - Re Reynolds number,D _h/ - Sc Schmidt number,/D - Sh Sherwood number - t time (s) - T absolute temperature (K) - T increase in temperature of liquid at bubble boundary with respect to original liquid in binary mixture (K) - gu solution flow velocity (m s^–1) - x mass fraction of more volatile component in liquid at bubble boundary in binary mixture - x ₀ mass fraction of more volatile component in original liquid in binary mixture - y mass fraction of more volatile component in vapour of binary mixture - contact angle - local thickness of one phase velocity boundary layer (m) - _m local thickness of corresponding mass diffusion layer (m) - ^* local thickness of two-phase velocity boundary layer (m) - _o initial liquid superheating (K) - constant in Henry's law (m² s^–2) - liquid kinematic viscosity (m² s^–1) - ^* bubble frequency at nucleus (s^–1) - ₁ liquid mass density (kg m^–3) - ₂ gas/vapour mass density (kg m^–3) - surface tension (N m^–1) Paper presented at the International Meeting on Electrolytic Bubbles organized by the Electrochemical Technology Group of the Society of Chemical Industry, and held at Imperial College, London, 13–14 September 1984.     

Variable‐temperature IR spectroscopic studies of CO adsorbed on Na‐ZSM‐5 and Na‐Y zeolites

CO interacts with extraframework alkali metal cations (M⁺=) of zeolites to form both M⁺CO and M⁺OC species. By using variabletemperature FTIR spectroscopy, these Cbonded and Obonded species were found to be in a temperaturedependent equilibrium. For the same cation, the difference in interaction energy depends upon the zeolite framework. Thus, for the equilibrium process ZNa⁺=CO ZNa⁺OC, where Z represents the zeolite framework, H ⁰ was found to take the values 3.8 and 2.4 kJ mol^– for CO/NaZSM5 and CO/NaY, respectively. The Cbonded species show always the highest cation–CO interaction energy.     

The effect of cobalt on the reactants adsorption and activity of fused iron catalyst for ammonia synthesis

Modern adsorption study facilities as well as scanning electron microscopy, X-ray diffraction, Mössbauer spectroscopy and X-ray fluorescence spectroscopy were used to investigate the effect of cobalt on the adsorption of nitrogen, hydrogen and ammonia on the surface of cobalt modified iron fused catalysts. Adsorption studies were carried out at the temperature range specific for ammonia synthesis (385C). Activity tests were carried out under 10 MPa in the 350–450 C temperature range. Investigations were performed on the traditional multipromoted iron catalyst and on the series of catalysts prepared with addition of cobalt. Introduction of cobalt changed considerably the sample behaviour during activation and ammonia synthesis. Addition of cobalt promoted the iron catalyst for ammonia synthesis. The most active sample was that containing approximately 5.5 wt% Co. Cobalt changed the adsorption behaviour of the catalyst. Chemisorption of nitrogen is much higher for cobalt catalysts. Growth of nitrogen chemisorption and decrease of ammonia adsorption resulted in the growth of catalytic activity of cobalt catalysts in ammonia synthesis.     

Cooperative inclusion of sodium 1-pyrenesulfonate by γ-cyclodextrin

Summary The interaction of -cyclodextrin(-CD) with sodium 1-pyrenesulfonate(PS) was studied spectrophotometrically. -CD was found to cause much larger decrease in the absorption maxima of PS than -CD. The fluorescence spectra of PS in the presence of -CD showed excimer emission, while those of PS with -CD showed only monomer emission, indicating that -CD forms 12 (-CDPS) complexes in which two PS molecules are included in the -CD cavity in a face-to-face fashion. The binding isotherm showed a sigmoidal curve. The association constants were estimated by computer simulation of the binding curve. The 12 (CDPS) complex was found to be much more stable (K=10⁶ M^–1) than the 11 complex (K=1 M^–1). At high concentration of -CD another -CD cooperates in binding two PS molecules, resulting in the formation of a 22 complex.     

Change in degree of polyamidation of polycaproamide during orientation stretch

Conclusions The effect of stretch ratio, the ratio of stretch ratios in the cold and hot zones, and of the relative viscosity of polycaproamide on the degree of its breakdown during stretching have been examined.The degree of breakdown decreases if the viscosity stays within the range 3.25–3.35, and the stretch ratio in the cold zone is the maximum possible.Translated from Khimicheskie Volokna, No. 5, pp. 26–27, September–October, 1983.     

Performance and impedance studies of thin,porous molybdenum and tungsten electrodes for the alkali metal thermoelectric converter

Columnar, porous, magnetron-sputtered molybdenum and tungsten films show optinum performance as AMTEC electrodes at thicknesses less than 1.0 m when used with molybdenum or nickel current collector grids. Power densities of 0.40 W cm^–2 for 0.5 m molybdenum films at 1200 K and 0.35 W cm^–2 for 0.5 m tungsten films at 1180 K were obtained at electrode maturity after 40–90 h. Sheet resistances of magnetron sputter deposited films on sodium beta-alumina solid electrolyte (BASE) substrates were found to increase very steeply as thickness is decreased below about 0.3–0.4 m. The a.c. impedance data for these electrodes have been interpreted in terms of contributions from the bulk BASE and the porous electrode/BASE interface. Voltage profiles of operating electrodes show that the total electrode area, of electrodes with thickness <2.0 m, is not utilized efficiently unless a fairly fine (1×1mm) current collector grid is employed.     

Electrodeposition of Au–Sn alloys from acid Au(III) baths

A bath for the electrodeposition of white gold alloys of interest for the electroforming of hollow jewellery is proposed and investigated. The system was an acidic Au(III)–Sn(IV) bath for the electrodeposition of Au–Sn alloys. The electrochemical investigations were based on cyclic voltammetry, linear-sweep voltammetry, galvanostatic electrodeposition experiments and in situ Raman spectroscopy. The electrode kinetics of alloy formation were elucidated by stripping voltammetry. The effects of cathodically adsorbed CN^– were studied by in situ Raman spectroscopy. Electrodeposited foils were studied from the crystallographic, compositional and morphological points of view. Codeposition of Au and Sn gives rise to a single phase of approximately equiatomic composition over a current density interval of 10 to 40 mA cm^–2. This orthorhombic phase is structurally the same as the phase of the equilibrium Au–Sn system, but its stoichiometry and lattice parameters are different. The equilibrium two-phase , structure can be obtained by heat-treatment.     

Reductive transamination of methoxyacetone with benzylamine over Pd/SiO2 catalyst modified with anchored chiral compounds

Methoxyacetone was transaminated with benzylamine to methoxyisopropylamine over a Pd/SiO₂ catalyst modified with Lalaninol or Lphenylalaninol covalently anchored to the surface of the support via an organosilicon spacer group. In the first step of transamination a Schiff base was formed from the ketone and benzylamine, and then it was hydrogenated in the second step on the chirally modified Pd/SiO₂ catalysts to an asymmetric secondary amine (Nbenzylmethoxyisopropylamine). In the third step the hydrogenolysis of the asymmetric secondary amine resulting in methoxyisopropylamine and toluene was carried out over a 10 wt% Pd/C catalyst. The highest enantiomeric excess of (S)methoxyisopropylamine was observed in cyclohexane (ee = –20–21%) using anchored Lalaninol as a chiral modifier.     

Lean NOx catalysis over alumina‐supported catalysts

aluminasupported catalysts show promise as lean NO_x catalysts. The role of alumina in influencing the structural and chemical properties of the active phase supported on it is discussed using some effective aluminabased lean NO_x catalysts. These include Ag/Al₂O₃, CoO_x/Al₂O₃ and SnO₂/Al₂O₃. Alumina plays an important role in stabilizing Ag in the oxidic phase and cobalt in the 2+ oxidation state. For SnO₂/Al₂O₃, alumina increases the SnO₂ surface area. On both Ag/Al₂O₃ and SnO₂/Al₂O₃, alumina also participates actively in the NO_x reduction reaction. An active organic intermediate is formed on Ag or Sn oxide which reacts with NO_x subsequently on alumina to form N₂.     

Investigation of sex pheromone components of female asian corn borer,Ostrinia furnacalis (Hübner) (Lepidoptera: Pyralidae) in Taiwan

(E)-12-Tetradecenyl acetate (E12–14OAc), (Z)-12-tetradecenyl acetate (Z12–143nOAc), and tetradecanyl acetate (14OAc) were extracted and identified as major chemical components from female tips of the Asian corn borer,Ostrinia furnacalis (Hübner) (Lepidoptera: Pyralidae) in Taiwan, with a combined wash ratio of 483715 and an individual female ratio of 453916. The average amount ofE12-,Z12–14OAc and 14OAc in each female gland was 6.6±4.6, 5.8±3.5, and 2.4±1.7 ng/female, respectively. The mixture of these three synthetic chemicals not only gave strong activities in male antennae but also could catch significantly more males than virgin females in field-trapping tests. The field test also showed no significant difference in trapping ability among the three-component Taiwan formulations, the two-component Taiwan formulation (Z12–14OAc andZ1214OAc, 5347), and the Japan formulation (Z12–14 OAc andE 12–14OAc, 3:2).     

Additional male mediterranean fruitfly (Ceratitis capitata wied.) Attractants from Angelica seed oil (Angelica archangelica L.)

Two sesquiterpene hydrocarbons, -copaene and -ylangene, were isolated from bioactive fractions of angelica seed oil and were shown by field bioassays to be attractive to the male Mediterranean fruit fly. Their relative attractiveness, compared with the(+)-and (–)--copaene enantiomers, are: (+)--copaene>angelica -copaene>angelica -ylangene>(–)--copaene. The enantiomer ratios for the two compounds are: -copaene, 61.4% (+), 38.6% (–); -ylangene, 91.9% (+), 8.1% (–).trans--Bergamotene was also isolated from the same fractions, but in sufficient quantity for bioassay [enantiomer ratio: 95.7% (+), 4.3% (–)].     

Comparative analysis of mass transfer at vibrating electrodes

The application of oscillatory flows to electrochemical processes was found to increase the rate of mass transfer and improve the quality of deposit. Various mechanisms to which this phenomenon is attributable are discussed and expressions for the average rate of mass transfer, resulting thereof, are derived. Comparison with experimental data indicates that the stretched-film concept, although an oversimplification of the physical situation, is most successful in correlating the data.Nomenclature A Amplitude of oscillatory motion (cm) - c Concentration of the diffusing species (g mol cm^–3) - D Diffusivity (cm² s^–1) - F Frequency of oscillation (Hz) - k Instantaneous mass transfer coefficient (cm s^–1) - ¯k _vib Time-average vibratory mass transfer coefficient (cm s^–1) - L Length of active area (cm) - S Velocity gradient at solid-liquid interface (cm s^–1 cm^–1) - u Oscillatory velocity of fluid layers adjacent to the electrode (cm s^–1) - _u Rel Relative velocity between the electrode and the bulk of the fluid (cm s^–1) - v Relative velocity between the electrode and the fluid layers adjacent to it (cm s^–1) - W Width of active area (cm) - x Distance along the surface of the electrode (cm) - z Distance perpendicular to the surface of the electrode (cm) - Dimensionless distance=z(S/9Dx)^1/3 - Dimensionless distance=z ²/2 - Kinematic viscosity of the electroyte (cm² s^–1) - Angular frequency=2F     

The effects of antimony and glue on zinc electrowinning from Kidd Creek electrolyte

The individual and combined effects of antimony and glue on zinc deposition current efficiency and polarization and on the morphology and orientation of 6h zinc deposits electrowon at 500 A m^–2 and 38° C from Kidd Creek zinc electrolyte were determined. Glue increased zinc deposition polarization, reduced the deposit grain size, changed the preferred deposit orientation from basal to intermediate, but decreased the current efficiency. At concentrations above 0.02 mgl^–1, antimony had a strong depolarizing effect on zinc deposition resulting in a basal deposit orientation and very low current efficiency. Certain combinations of antimony and glue, however, optimized zinc deposition current efficiency and consistently gave an intermediate 114 112 103 102 101 preferred deposit orientation. A correlation was observed between the current efficiency (CE) and the nucleation overpotential (NOP) for zinc deposition such that the CE was a maximum when the NOP of the initial cell electrolyte was 120–130 mV and when the NOP of the final cell electrolyte was 100–110 mV.     

Sex pheromone chemistry of the western spruce budwormChoristoneura occidentalis Free

SCOT capillary Chromatographic and SCOT capillary chromatographic-mass spectrometic analyses of gland washes and effluvia of virgin femaleChoristoneura occidentalis Free, have been conducted with both a diapausing and nondiapausing strain of this insect. The following compounds were identified in gland washes and effluvia in both strains:E andZ11–14Ald,E andZ11–14Ac,E andZ11–14OH and 14Ald, 14Ac, and 14OH. The average aldehyde: acetate: alcohol ratio found by analysis of single glands by virgin females (nondiapausing strain) was 170.73. Analysis of virgin female effluvia gave this ratio as 1038 (diapausing strain: %Z=8, 11, 15, respectively) and 1036 (nondiapausing strain: %Z=8, 11, 12, respectively). The saturated components were generally 1–2% of theE isomer in each case. Comparisons of EAG responses of bothC. occidentalis andC. fumiferana toE11–14Ald,E11–14Ac andE11–14OH were made. Correlations with both laboratory and field data previously published were also made betweenC. fumiferana andC. occidentalis.Lepidoptera: Tortricidae.     

Simultaneous underpotential deposition of lead and thallium on polycrystalline silver-III

Simultaneous underpotential deposition of lead and thallium from a tartrate medium on a polycrystalline silver electrode is reported. Results of cyclic voltammetric investigations of the effects of concentration and sweep rate on the codeposition behaviour are discussed. Further investigations of the codeposition behaviour through voltammetric experiments using programmed potential inputs are described and discussed in terms of formation of a two-dimensional alloy. Finally, the validity of the existing models of electrochemical phase formation has been investigated under the codeposition conditions.Nomenclature I _pn nondimensional peak current - E _pn nondimensional peak potential - E _/12n nondimensional half-peak width - Q _M charge due to UPD coverage of metal M (Ccm^–2) - t _d holding time (s) - sweep rate (V s^–1) - E potential (V) - instantaneous nucleation growth rate constant     

Effect of pyrolysis temperature of the catalytic activity of active carbon+cobalt phthalocyanine in sulfur dioxide oxidation by oxygen

Structural changes during the pyrolysis of the catalyst active carbon+cobalt phthalocyanine (Ac+CoPc) in the temperature range 500–800°C are investigated using infrared spectroscopy, XRD and DTG analysis. The decomposition products contain organic residues of the phthalocyanine rings and separate phases of CO3O4 and -Co. The effect of pyrolysis temperature on: (i) the chemical stability of Co in the pyrolyzed CoPc in 0.5M H2 SO4; (ii) the electrocatalytic activity for oxidation of SO2 by oxygen; and (iii) the partial electrochemical reactions of SO2 oxidation and oxygen reduction, has been studied. The rate of electrochemical oxidation of SO2 is affected only by the active centres formed on pyrolysis of the chelate rings. The presence of Co at lower pyrolysis temperatures decreases the oxygen diffusion limitations. It is shown that the rate of SO2 oxidation by oxygen is limited by mass transport of oxygen.